It's the pace of the video, lets you notice small things, like rolling a brush off the back of a fragile decal, or using clingfilm as a mask extension. Great vid.
Wow, simply amazing!!! All the skills and tools put in together. I used to build model kits long ago and since then stopped almost 12 years ago already. Seeing such nicely done kit surely gets me going again, but definitely not sure if i can still have good hands like this now.
I’m getting this kit as my first build. I hope I can do it. I really like the sticker of the sun rays that come with it. I might paint mine a little different but I’m not sure yet. I’ll see when I get it.
What scale is your die-cast model? You know not every model is same size right? This model kit is 1/24 scale, and using only wide body kit is a waste. You can try buying resin body kit from "hiroboy" or fabricate your own completely from 0. It wont be simple installation process in any way...
I’ve literally been attached to car modelling in the past month or two and I’ve made a huge list of what I’m getting to start my journey but my hearts just been broken. I’m moving to Cyprus this month (from the UK) and I’ve just found that half off the things that I need are not allowed to be shipped there (spray paints,glue,primer etc) and now I’m so sad that something I’ve just began to love has basically just left me 😭 And now I can’t find anywhere in Cyprus that does good primer,glue and the actual stuff I need RIP 😭😭
Model was 40€ paints ant glues were about another 40 (knowing this model is quite basic with not so many colors ) and you won't be using up all of them completely... So about 110€+ for model , paint ant glue... Not counting in tools like airbrush
@@Atte123 yes, just cut away intercooler parts that won't be visible, like pre-defined mounting spots. And cut out some of the bumper from other side, but be careful don't cut away chassis mounting spots.
It's pretty simple to mod the radiator so that it can be installed after painting the body. Only have to cut off a few bits of plastic. Definitely worth the effort to avoid the hassle of masking to paint the radiator separately.
I am not an expert in those things, but you simply slide on wheels till they reach stopping point, and model already has some camber, no mods required :)
Cut out decal, use warm water, cut piece bigger than a decal itself. Place the whole piece on to the model surface, wet area where decal goes, and with soft brush transfer decal from paper to model, without any kind of lifting or peeling decal, just smooth transition thru wet area...
Great job. Did you thin the X10 clear coat? Did you wet sand and polish after it dried for a few days? Sometimes I think 2K automotive clear coat looks too thick.
Nice buddy i built same one on box too from this kit and i done the skyblue one from the wine 2no kit i think it was but looking good i just subbed to your channel my freind came across it i was doing videos for RUclips when i built them but see im onlymodelling just unfer 2 years iv only learned i done unboxings first then documented builds ill be watching and supporting you from the side lines my modelling freind look forward to seeing how you make it look thanks for sharing 👍👍,, Keith
Yes, It was very bendy and difficult to shape. I gave up painting it with correct color. It is not glued to model with intention to replace it with photo-etched aftermarket one :) Thanks for question!
Enjoyed every single second of this video! But I have a queestion, how do you do with the nubs after you spray paint and cut off the parts? For example, the brakes on the frame you painted gold, but how do you deal with the nub having different color?
I touch up them with brush, it doesn't really matter when its on side, however on flat surface where decal goes I use airbrush to keep layer of paint as thin as possible.
i didn't give you the hard way to make it actual but it look nice❤️ i love that. How bout the light can you make it real? mybe you can put some led and battery to your lights car? 😁
@@RevelationOne Model cars with custom body kits tend to be more expensive than regular versions, f.e. the same R35 in stock config will cost 35$. And there is model car kits that start at 15$ (Fujimi). At the end You cant really put price tag on the enjoyment and fun you get building one of those :)
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
I'm amazed at how beautiful and clear your videos are, lighting and everything is perfect along with your modeling skills!
Thanks :), learned lots of tricks from You :)
@@StaticModel where can I buy this kit?
That’s nicely done! Lots of modeling skills involved in this build. I have learned a lot from watching your builds. Thank you for sharing!
It's the pace of the video, lets you notice small things, like rolling a brush off the back of a fragile decal, or using clingfilm as a mask extension. Great vid.
X2!
Wow, simply amazing!!! All the skills and tools put in together. I used to build model kits long ago and since then stopped almost 12 years ago already. Seeing such nicely done kit surely gets me going again, but definitely not sure if i can still have good hands like this now.
i ordered a tamiya r32 and its arriving today cant wait
omfg the finished model looks dope 🔥🔥
Thanks man :)
I truly like your videos very educational I do my research before I buy my kits ! Great building skills
Thanks for the kind feedback! Always glad to help at least in some way!
I’m getting this kit as my first build. I hope I can do it. I really like the sticker of the sun rays that come with it. I might paint mine a little different but I’m not sure yet. I’ll see when I get it.
Also thinking about getting thos as my second build after revell audi r8, is this too hard for me😅💁🏻♂️
How did it turn out?
Wow it looks awesome! I might get this model. I already have some experience, so hopefully I can build it.
Nice build, very inspirational 🙌🏼
Спасибо за Русские субтитры!👍👍👍👍
Great job. Some black panelline washes would really pop out on the white body paint.
I was thinking about it, but sadly paint layer is quite too thick :) Perhaps needed to do some panel line scribing :)
Nice work 👍 from Japan 🇯🇵😊
Thanks :)
Beautiful build brother...wow
Wow! Nice built!
it is enough to soak the stickers with water or do you need glue??? 🙏
Water is enough. But for some sections (rear bumper) you need decal softening solution.
@@StaticModel thanks
Bad Ass dude, so mean looking. Keep building these cool cars.
very beautiful gt-r😍
Build me one! Looks dope af! Keep up the good work
Do u build and sell these?
I like the music. What is the artist / track for the first song?
I love it!!!
Where did you buy this? Can i have a link? Thanks👍🏻
Hi, at local hobby store, they don't have web page. But maker is Aoshima.
I have a metal model of a gtr if I bought the kid do you think I could put the body kit on that instead
What scale is your die-cast model? You know not every model is same size right? This model kit is 1/24 scale, and using only wide body kit is a waste. You can try buying resin body kit from "hiroboy" or fabricate your own completely from 0. It wont be simple installation process in any way...
I’ve literally been attached to car modelling in the past month or two and I’ve made a huge list of what I’m getting to start my journey but my hearts just been broken. I’m moving to Cyprus this month (from the UK) and I’ve just found that half off the things that I need are not allowed to be shipped there (spray paints,glue,primer etc) and now I’m so sad that something I’ve just began to love has basically just left me 😭 And now I can’t find anywhere in Cyprus that does good primer,glue and the actual stuff I need RIP 😭😭
Ship by a currier, don't take it with you on planes.
i liked the video up to the part where you mentioned "cheap Chinese rotary tool". was the race labeling necessary?
I don't get what's wrong? But when you focus so much on it, now it really sounds like something odd...
@@StaticModel nice sick build there btw
@@kiynuhcnat Thanks, take care:)
how did you you do the side windows without getting paint on it
I masked them off with masking tape.
how much do you spent for all the stuff you need to build this car incl. the model ?
Model was 40€ paints ant glues were about another 40 (knowing this model is quite basic with not so many colors ) and you won't be using up all of them completely... So about 110€+ for model , paint ant glue... Not counting in tools like airbrush
@@StaticModel thank you very much.
Awesome my friend !
Hello friend . You know what kind of plastic is that white body shell?
Polystyrene most of the time.
@@StaticModel Thank you very much appreciated
Just got mine today! What do you think were the hardest things to do on this build?
Waiting paint to fully cure is the hardest part :D I had troubles with spoiler, in the end just left it as it is...
@@StaticModel do you think i could somehow add the front bumper afterwards with the intercooler and front ”grill” painted separately?
@@Atte123 yes, just cut away intercooler parts that won't be visible, like pre-defined mounting spots. And cut out some of the bumper from other side, but be careful don't cut away chassis mounting spots.
@@StaticModel maybe I could try that, so much easier to detail and paint the bumper and intercooler and grill
Much easier to use sanding barrel than to heat up plastic and cut by hand on fenders
I guess, if you have it... I used what I had on hand.
It's pretty simple to mod the radiator so that it can be installed after painting the body. Only have to cut off a few bits of plastic. Definitely worth the effort to avoid the hassle of masking to paint the radiator separately.
Were those wheels easy to fot well and right position to get good fitment?
I am not an expert in those things, but you simply slide on wheels till they reach stopping point, and model already has some camber, no mods required :)
@@StaticModel thanks, definitely have to get one and build!
loooks cool. i want to get into this stuff but I have 1 question. do you have any tips on how to apply decals cause i always struggle and break them.
Cut out decal, use warm water, cut piece bigger than a decal itself. Place the whole piece on to the model surface, wet area where decal goes, and with soft brush transfer decal from paper to model, without any kind of lifting or peeling decal, just smooth transition thru wet area...
@@StaticModel thanks mate I really appreciate it. Keep it up and stay safe.
Hi, it's very nice job! Would you please tell me which color you used for the rear exhaust? :)
Tamiya clear orange, yellow clear ,clear blue. Left stock chrome plating.
Hello do you know why when i use tamiya x22 for clear coating it never dries completely please ?
You could be living in humid area where it takes long time to cure.
@@StaticModel ok thanks👍
@@davidwozny3484 in Lithuania it takes about 1 week before I can touch it.
@@StaticModel it s the same in France too long i stop use it now i use 2k gravity and it s Perfect after 2 days you must test it
Great job. Did you thin the X10 clear coat? Did you wet sand and polish after it dried for a few days?
Sometimes I think 2K automotive clear coat looks too thick.
Coat is thinned 1:1, I have not wet sanded clear coat, only polished with Tamiya polishing compound.
Nice buddy i built same one on box too from this kit and i done the skyblue one from the wine 2no kit i think it was but looking good i just subbed to your channel my freind came across it i was doing videos for RUclips when i built them but see im onlymodelling just unfer 2 years iv only learned i done unboxings first then documented builds ill be watching and supporting you from the side lines my modelling freind look forward to seeing how you make it look thanks for sharing 👍👍,, Keith
nice work
Loks awesome. Very nice work!
Thanks for kind comment:)
Can you link the materials and stuff you use under this comment if possible and where you got the car. please and thankyou :)
Nicely done, great kit.
Looks great
did you leave the spoiler like that on purpose though?
Yes, It was very bendy and difficult to shape. I gave up painting it with correct color. It is not glued to model with intention to replace it with photo-etched aftermarket one :) Thanks for question!
i have no experience in assembling snapkits, and i already order a gtr r35 nismo kit, wish me luck to do it when it arrives haha :)
That's not a snapkit :)
@@StaticModel ouh sorry i really don’t know anything bout this 😅 thanks for the information
@@DEENST4R"snapkit"usually means it's partially painted ant requires no glue for assembly :)
@@StaticModel 👌🏻😚
good music choice
What is the name of the last song?
You make a solid and Good model
I must ask you about your masking tape. It seems much thinner than what I use - what brand is it? Thanks!
KAMOI Masking Tape Kabuki-S
@@StaticModel Thank you! I wonder if U.S. distributors supply it. Or, I'll try online.👍
@@bobyoung1698 In the U.S it might be rebranded as decoration tape, it might come in funky colors, but that's still the same stuff :)
@@StaticModel Thanks!
Я бы смывочку в расшивку то добавил!
Where did you buy the car plsss make the content plsss
I bought it at my local hobby shop, It depends where are you from and if you have similar shops in your area :)
Enjoyed every single second of this video! But I have a queestion, how do you do with the nubs after you spray paint and cut off the parts? For example, the brakes on the frame you painted gold, but how do you deal with the nub having different color?
I touch up them with brush, it doesn't really matter when its on side, however on flat surface where decal goes I use airbrush to keep layer of paint as thin as possible.
@@StaticModel Thanks! That is really helpful!
Excellent job
and one more thing i hve one suggestion can you modify with that door??
Sorry, but what do You mean ? :)
i mean make it real, so that it look pretty cool👍🏻 like open and close🤗🤗❤️
@@stenzax5346 thanks for suggestion but I like it this way :)
i didn't give you the hard way to make it actual but it look nice❤️ i love that. How bout the light can you make it real? mybe you can put some led and battery to your lights car? 😁
nice cars bro😎😎
Scale Mods what is the music you used on this video please ?
where ar u bought it?
you put the brake rotors on backwards
I checked once again, they are according to instructions. Thanks for heads up:)
One question...can I send you mine so you can build my gtr?
Posting it back to you without breaking would be very difficult :)
OMG this R35 looks so MAaaaaaaaaaaaaaaaaaaaaaaaaaaaad
Glad You like it:)
Good job great video 👍
beyond excellent
I'm sorry but my ocd tells me to tell you that it's not the radiator it's the front mount intercooler. But still very nice job.
Come on don't be _that_ guy. Pathetic.
How much one of these run for? I want one.
40-60$
@@StaticModel that's not bad at all. I might have to get into model cars because this one looks too dope!
@@RevelationOne Model cars with custom body kits tend to be more expensive than regular versions, f.e. the same R35 in stock config will cost 35$. And there is model car kits that start at 15$ (Fujimi). At the end You cant really put price tag on the enjoyment and fun you get building one of those :)
Where do you buy your model kits from?
Local hobby store.
With a lot of import cars I have to order them online from overseas. I get nervous ordering from Japan. Does your local store ship merchandise out?
Round 2 Models or Model Roundup or Hobbylink, a website l order mostly from is AK Collectibles Model Cars and More, hope this helps
spectacular...👍
Where can we buy this on sir?
It depends from where are You from, try looking at Your local hobby stores, or Ebay as a last resort option.
I realy want to try build a mini car but I'm too afraid to ruin it myself
You can start with Aoshima pre painted model series, main parts are usually pre painted and it's easier for begginer.
@@StaticModel thank your sir, will do!
Nice!
Sweet🤗
自由に歩く!!!
кусок мыла...
Где расшивка?
:).... Nice
Покажите это Стилову
Wow
Mega
br?
自由に歩く！？？？
Ох уж этот акцент