Wish our Gub took better care of you guys. Disgusts me seeing so many homeless but never see illegals out in the cold. (ca). Wrong on a level thats unspeakable. Thanks for your efforts .
I saw this car at Columbus GG and was very impressed. Just went back through my phone and found some photos of the engine, Rad cover and details in the engine area. Always the details with the RS! Love it - inspiration for my car build from the beginning. Thanks gang for getting these cars out there - driving them and talking about them.
This is my favorite build I have seen from you guys so far. I really like the front seats with headrest and good harness mounts. So many nice touches all around but it pulls off the survivor vibe so well a casual glance would leave this car unnoticed. Things like the wheels and steering wheel, console, etc really add to the survivor look and feel.
One weakspot even on boxed frames are the top rear spring pockets. I cut into mine and using some rectangle tubing tied the two together & the frame . Completely eliminated any twist back there. Added edelbrock traction bars on both side (no ss camino in67) and eliminated any movement back there, boxed uppers, poly bushed, SSM lowers Hotckiss springs and basic white KYB. Launches hard goes straight no wheelhop Wish you guys tossed out a ballpark # of a basic chassis $
I had a black 67 SS 396 Chevelle with a rock crusher muncie 4spd, 4.11 12 bolt rear with red velvet interior right out of high school in 1992. NOTHING compared to this thing but OMG so bitchin man.
Do you guys sell the A/C vent stuff in the center of the dash and the bezel for the electric windows in the console if that is just a modified factory chevelle 4-speed console?
Dont want any computer controlling anything even hitting a rev on a downshift. ITs all part of the fun. Same wtih traction control basketball type throttle response etc
Hi @RoadsterShop ... possible have a new chassis number as my stock 65 Impala in Nairobi? The govt will only allow me to bring in if the chassis numbers remain the same ...
have you all done A gbody I mean a 186 mcss with the same set up .frame front rear . motor. Auto .I like see a 1986 mcss factory look but all these compents
I would be surprised if it’s under 150,000. You start adding up just parts and it creeps up extremely quick. Then add labor and whatever one off items they have. I’m thinking the owner could’ve bought 2 new vette’s for this.
100k in parts alone, 100k labor easy.. it gets up there fast. If you can afford that most guys have funds for a vette too. I have couple cars built by rs, and new cars inc a new z06, old cars just cooler and more viciseral...
Seriously cool driver car!
💪💪👍👍😎 I'm with ya Shawn..she's so badass
Honestly . . . ONE HELLUVA Ride!!! What a nice vehicle!! If I still owned my '67 Chevelle (and had the funds) I'd surely send it your way 😍💯👍
Classy build and with 650 hp more than enough power too!
Very nice car from a old disabled veteran at78years old 👌
Wish our Gub took better care of you guys.
Disgusts me seeing so many homeless but never see illegals out in the cold. (ca).
Wrong on a level thats unspeakable. Thanks for your efforts .
These guys just don’t miss, fantastic build 💪🏾
Badass car love how you did the supercharger and made it look like the valve covers looks like a old school motor instead of modern ls
Love your Builds! I look at Your Website Build pics for hours🤤
I saw this car at Columbus GG and was very impressed. Just went back through my phone and found some photos of the engine, Rad cover and details in the engine area. Always the details with the RS! Love it - inspiration for my car build from the beginning. Thanks gang for getting these cars out there - driving them and talking about them.
67 chevelle is My absolute favorite ride!!! Fully my dream car
Absolutely perfect as always guys!! Honored to play a small part in these amazing builds 🤜
Once I win the lottery, I'm headed yall's way for a 1970 Chevelle build . . . Just great stuff, always.
Truly exceeding what dreams are made of guys!
Another awesome car! Great job guys!
Exactly what I want to do on my 67 convertible!! Love it.
This is my favorite build I have seen from you guys so far. I really like the front seats with headrest and good harness mounts. So many nice touches all around but it pulls off the survivor vibe so well a casual glance would leave this car unnoticed. Things like the wheels and steering wheel, console, etc really add to the survivor look and feel.
67 chevelle the greatest and most beautiful car ever made.
I disagree , I like the 66 better
So I got 3 of them !
Chevy chevelle........ Awesome........ Greetings from india 🇮🇳🤠🤠🙌🏻🤘
Love your videos my brother, great work!💪🏿
I had 67 SS back in the mid 70s. Miss that car.
The stance on this Chevelle..🏆😎👍
You guys changed the game.
These guys are the game!!
BAD TO THE BONE BUILD GUYS... NEVER FAILS, I LOVE ROADSTER SHOP BUILDS, RIGHT THERE WITH DSE
One weakspot even on boxed frames are the top rear spring pockets.
I cut into mine and using some rectangle tubing tied the two together & the frame .
Completely eliminated any twist back there. Added edelbrock traction bars on both side (no ss camino in67) and eliminated any movement back there, boxed uppers, poly bushed, SSM lowers Hotckiss springs and basic white KYB. Launches hard goes straight no wheelhop
Wish you guys tossed out a ballpark # of a basic chassis $
found out in Columbus it resides in my hometown! such a killer car
I had a black 67 SS 396 Chevelle with a rock crusher muncie 4spd, 4.11 12 bolt rear with red velvet interior right out of high school in 1992.
NOTHING compared to this thing but OMG so bitchin man.
Awesome build!
One gorgeous Lady!
Sooo Cool! Job well done as usual guy's!
Cool a corvette on a '67 chevelle body👍👍
Cool. The engine is neat as well.
Well done, love your work. Hope to have you do some work for me some day. Thank you for the video, keep 'em commming.
Love the yellow headlights. Sweat car
Sick ride!
Sweet ride!
I see this is a VA Car, hope to see it one day. :)
Would love to see you put your hands on a 1st gen Roadster Shopified 65 Buick Riviera.
Beautiful build, only criticism is those speaker covers don't gel with the door panel. Just my opinion.
Fire 🔥
Very nice car
Killer car
Do you guys sell the A/C vent stuff in the center of the dash and the bezel for the electric windows in the console if that is just a modified factory chevelle 4-speed console?
Beautiful car ! I’ve always like them. Those with the 421 , 4sp where very nice cars stock.
Remember when TBI and tpi conversions were the rage? Wonder when.....
In the meantime real slick 67
goodjob!🤟😎🚘 cool car like. 😊
AW COOL! That new old look'n dealership badge is a bitch'n touch !
Very nice. What does a build like this cost on average?
I dream of this setup for my '67 Chevelle Convertible... Wonder what it cost???
jesus! i can't imagine what that cost. i'm just trying to get into a 67 with a 427 at a reasonable price.
Dont want any computer controlling anything even hitting a rev on a downshift.
ITs all part of the fun. Same wtih traction control basketball type throttle response etc
You guys gonna do a overview on the 70 chevelle
I’m pretty sure they’ve already done a couple 70’s. There’s a video breakdown of one of the builds from two years ago on this channel.
Hi @RoadsterShop ... possible have a new chassis number as my stock 65 Impala in Nairobi? The govt will only allow me to bring in if the chassis numbers remain the same ...
So well done. Be interested in build cost
100k starting point, this one a tad more.. not cheap but their work is incredible.. full builds, paint, int , 300k and up..
Great car, is it just the camera angle but the roof lining looks like it’s sagging?
Tasteful!
have you all done A gbody I mean a 186 mcss with the same set up .frame front rear . motor. Auto .I like see a 1986 mcss factory look but all these compents
N90 17 front 19 rear
It's a cool car^^
Does anyone know what "reasonable" money is for build like this?
Where can I get that Rev match and flat shift kit?
Why waste $ just learn how to shift it right.
Older 4 speeds with mechanical linkage tolerate this a lot better fwiw
My T56 does not like it
Super bad azz
What’s the kit cost .
Frame
Brakes
Coil overs
For 1967 Chevelle
Wish they would toss about some ballpark numbers. Not a fan of crusing websites too many issues over the yrs
What does a total restoration cost?
How much did this build cost? Total cost drive in and drive out?
Bet it was 100-150k easy
Open it up
How far is niceville and I don't know what beautiful I love it
If I had the money I'd take it off your hands
✌👍
Do you sell the Air Conditioning piece?
You mean the factory piece on the center top of the dash? May have an extra or two .Those are tough to find
No I mean the CNC piece that replaces the radio.@@gordocarbo
What kind of engine does this have ?
Lt4
Batch come to vegas 😊
Rather have?::::
67’ Chevelle
67’ Nova
I dislike the hanging headliner on the sides.
so will a new vett; how much money are you at with 66 under 150;000.00
I would be surprised if it’s under 150,000. You start adding up just parts and it creeps up extremely quick. Then add labor and whatever one off items they have. I’m thinking the owner could’ve bought 2 new vette’s for this.
A vette will never compete attention wise with this.
New vette is depreciating or catching on fire as we speak
100k in parts alone, 100k labor easy.. it gets up there fast. If you can afford that most guys have funds for a vette too. I have couple cars built by rs, and new cars inc a new z06, old cars just cooler and more viciseral...
@@SuperBoss351 where can we see the cars RS built for you? instagram fb etc?