Hey bud, absolute legend for posting this. I have a malfunction 4 so have stripped down a recently working machine and taken the part out, apparently Malfunction 4 is the steam thermoblock sensor which as far as I can find online is 1P315172. Any idea where I can get one or if there is a bridge or bypass operation I can perform? Thanks in advance. Smashing video.
Thanks Neil, Fortunately the machine which you see here was brought only because it was going cheap, I had no knowledge of this machine prior. Try descaling the Steam Thermoblock as they tend to have a buildup of deposits when they have been dormant for a while, I had to use this process numerous times once I had it up and running and the bit’s that came out where endless. Luckily I did not have to spend on parts as used parts prices are horrendous 😎. Regards.
Hi Acee, the machine is complete. I had removed certain parts prior to switching the machine on for the first time, which included the Drip Tray. Regards 😀.
Hi, Great video, I have a Mezzo Typ 790 Franke Machine, (which seems very similar, with less functionality) that I also got as a bargain. It works well for Black coffee and espresso. The guy I got it it from says that the milk steamer and hot water jet is not working so I cant make milky coffees. Any ideas on what to trouble shoot first?
Hi Fran, I cannot find the model you stated however be aware that the Franke Flair machine featured here has has the Steam Wand disabled for safety and this could only be enabled via a Terminal-3000 service tool which a Tea / Coffee Machine engineer carries to program machines. So when I try to dispense Steam, blocked is displayed. Not sure if yours is the same issue. Regards 😀
@@green-crocs-fixes1520 thanks. It's not the steam wand that is the issue. Mine has no steam want. The machine looks very similar to yours but with less functionality. It is the third jet where theilk and steam is supposed to come out. Nothing comes out of it.
What screwdriver did you use to open the device? socket wrench 2
Hi Automation,
if I can remember correctly most of the Screws where Torx and two of them where the security Torx type.
Hey bud, absolute legend for posting this. I have a malfunction 4 so have stripped down a recently working machine and taken the part out, apparently Malfunction 4 is the steam thermoblock sensor which as far as I can find online is 1P315172. Any idea where I can get one or if there is a bridge or bypass operation I can perform? Thanks in advance. Smashing video.
Thanks Neil,
Fortunately the machine which you see here was brought only because it was going cheap, I had no knowledge of this machine prior. Try descaling the Steam Thermoblock as they tend to have a buildup of deposits when they have been dormant for a while, I had to use this process numerous times once I had it up and running and the bit’s that came out where endless. Luckily I did not have to spend on parts as used parts prices are horrendous 😎.
Regards.
Have samebody a technical draw of the FLAIR?
Hi AK
you should find the PDF manual here; www.manualslib.com/manual/881328/Franke-Flair.html
very nice video thank yoi
Thanks Muhammad
@@green-crocs-fixes1520 hello
@@kofimawuliklu-qq8qf Hi 👋
please, please, please, post a full video of stripping thing down- the speeded part.
Sorry Petreitys,
but this section was actually recorded in time-lapse mode.
apologies once again.
ruclips.net/video/_ciMLriC_5I/видео.html not me but gives you an idea
ruclips.net/video/_ciMLriC_5I/видео.html not me but will give you an idea
how to find the drip tray coz it says that is missing.. please help
Hi Acee,
the machine is complete. I had removed certain parts prior to switching the machine on for the first time, which included the Drip Tray.
Regards 😀.
Hi, Great video, I have a Mezzo Typ 790 Franke Machine, (which seems very similar, with less functionality) that I also got as a bargain. It works well for Black coffee and espresso. The guy I got it it from says that the milk steamer and hot water jet is not working so I cant make milky coffees. Any ideas on what to trouble shoot first?
Hi Fran,
I cannot find the model you stated however be aware that the Franke Flair machine featured here has has the Steam Wand disabled for safety and this could only be enabled via a Terminal-3000 service tool which a Tea / Coffee Machine engineer carries to program machines. So when I try to dispense Steam, blocked is displayed. Not sure if yours is the same issue.
Regards 😀
ruclips.net/video/LBScYokH-mM/видео.html
@@green-crocs-fixes1520 thanks. It's not the steam wand that is the issue. Mine has no steam want. The machine looks very similar to yours but with less functionality. It is the third jet where theilk and steam is supposed to come out. Nothing comes out of it.
How do I contact you?
Hi, about what