Great video and this saw looks like it will be ideal for the little bit that I need to do. Just a little tip for cutting logs, let the spike bar bite into the bark of the log (the chainsaw will naturally pull it in that way) and lift the handle to pivot the guide bar down into the log. Super easy and controllable
Brilliant video covering everything I wanted to know about getting a chainsaw and setting it up for some gardening jobs. I will be getting one of these from Screwfix as so as my local store has one in for me to collect. Very professional job thank you.
Cheers for the video Phil, I purchased a similar model to yours and your guide is great to get it setup and makes it clearer. I will read the instructions and use your video guide to get mine all setup. Thanks!
There are two kinds of chain. The regular kind and the Carbide kind. STIHL do the carbide type under the "Picco Duro" brand. Not sure about Husqvarna and Oregon. Carbide lasts a lot longer but can't be sharpened by normal tools because it's too hard.
I bought this from Screwfix and found it excellent. It is a good bit of kit. I have just ordered another to give to my son as va birthday present for his garden. Like all these tools you have to have some competence to use them. It is very interesting reading swome reviews written by incompetents!!!! Thanks for this.
I still don't understand the tensioning sequence. How does the nut that's hidden round the back relate to the tensioning? I am being thick but I dont get it.
There is a small "nub" that protrudes out of the saw. This is moved forwards or backwards by the tension screw. As described by Phil this slots into the bar and moves it forwards or backwards. So you are essentially tightening it by moving the bar away from the saw. There are two of these holes on the bar - the one that isn't getting used by this nub is the one used to pu,p the chain oil into.
Thanks very much for the video Phil, very helpful. I've just purchased this saw and got up and running in no time following this guide. Seems a lot easier than going for a petrol saw as long as you have a plug within reach. I've seen a few people saying to check that tensioner after the first few cuts as the chain starts to bed in.
Thank you. I am glad it helped you set up :), Yes after about half hour use I had to tighten the chain again. But it still carried on cutting really well
@@philscraftcorner it could save your cable from pulling out of the saw if it was stood on i have 2 titan saw's a petrol and an electric i cut big fire wood every year never had a problem with both of them
Very useful video, never realised you need saw oil and assembly of chainsaw. I was expecting to unpack and start using. I wish such equipment came ready to use and I could use such videos on improving my skill on usage of chainsaw :)
If you run the saw with no oil you'll destroy the chain and bar pretty quickly. The oil flows into the bar and onto the chain via one of the two holes at the back of the bar (the other is occupied by the tensioner) If your chain overheats because you didn't put oil in or the oiler is blocked the chain will stretch and the links could break - then you've got a nice whip that will strip your face off.
I had just bought this a few days ago and decided while the kids are at school to assemble it! Like a previous Comment, I missed the lower hole where the chain holder lines up too!!! Your video is fantastic and Saved me a lot of time and frustration. I'm a first time buyer and user and wanted to make sure I have the assembly done correctly. I am glad that you have to assemble it, so that when you need to put a new chain on, you know exactly what you're doing, it's just a shame it doesn't come with a small sample pot of oil to get you going straight away, but I did buy the same chain oil that you were showing, now I will be putting the oil in, but will test it tomorrow when the weather it better. Thank you so much for this great video.
Thank you very much for uploading this video. I just bought the same unit and your video saved me a whole heap of time reading the dull instruction manual. I set mine up in under 10 minutes, lord alone knows how long I would have taken without it. Good work fella
Just a little bit of advice. If your cutting logs. You are better using just the tip of the bar as you will have more control that way once your cut goes through. Excellent instructional tutorial. Well done 👏 👍🏻👌
Thanks for the video. I initially missed the bit where the lower hole of the chain holder lines up with the tensioner. First thoughts after using it are good. However one very obvious downside is determining the oil level. It's very unclear.
Glad it helped I agree. I keep opening the cap to see if it's low before every use. The white plastic could be more transparent for sure. Make sure to check chain tention every now and then too
Thanks explaining the chain oil bit in more detail. It's a little confusing at first and I overfilled mine before seeing your vid. I didn't notice any fill level line either and the fill viewer on the side doesn't show anything other than the minimum level.
I have cut a few branches off trees for friends and family and it's a breeze to use, I have also used a bow saw and ox Pro superfast. In terms of ease and speed the ox Pro is great for high up cutting and the titan is a beast for 8" plus branches. Bow saw was a huge pain to get into tighter spaces
@@philscraftcorner You are absolutely correct about using the bowsaw in a confined branchy area, I was really only comparing its use on an exposed log on the sawing horse, I think these electric powered chainsaws are really of use in the log shed when you have a log slightly to long for the woodburner, then it saves all the starting up of a petrol saw.
Great REAL video. Just bought one of these chainsaws from Screwfix, and found this video extremely helpful.
Thank You.
Thanks. I'm glad it helped :)
@@philscraftcorner Same here, from screw fix, cheers Phill.
Great video and this saw looks like it will be ideal for the little bit that I need to do.
Just a little tip for cutting logs, let the spike bar bite into the bark of the log (the chainsaw will naturally pull it in that way) and lift the handle to pivot the guide bar down into the log. Super easy and controllable
Nice tip. Thanks
Brilliant video covering everything I wanted to know about getting a chainsaw and setting it up for some gardening jobs. I will be getting one of these from Screwfix as so as my local store has one in for me to collect. Very professional job thank you.
Thank you. I'm glad it helped you out
Cheers for the video Phil, I purchased a similar model to yours and your guide is great to get it setup and makes it clearer. I will read the instructions and use your video guide to get mine all setup. Thanks!
Thank you. I'm glad it was clear to follow for you. Good luck with the setup
Used one of these today, absolutely brilliant, such good value for money.
Mine is still going strong. I only use it once or twice a year though but it's been well worth the money
Ideal for guys who only use a chain occasionally. Don't need a pro saw with the whistles and bells, that's for daily pro use.
Nice review, spray paint any caps,for chain saw strimmers etc,yellow, never lose them
That's a really good idea
Just bought this Screwfix 39 notes,thanks for the video,been told good idea to buy really good quality chain
I haven't used this a ton but the chain supplied did need a little more tention after about 30 mins use. Other than that it has been fine
Do you know of any better quality chains that would fir this machine?
The one screwfix recommends is an oregon chain.
www.screwfix.com/p/oregon-91-3-8-40cm-chainsaw-chain-3-8-x-0-050-1-3mm/9090k
@@philscraftcorner Thanks Phil. Ill give that one a try then. :)
There are two kinds of chain. The regular kind and the Carbide kind. STIHL do the carbide type under the "Picco Duro" brand. Not sure about Husqvarna and Oregon. Carbide lasts a lot longer but can't be sharpened by normal tools because it's too hard.
Hey Phil, top video,I read the instructions and it seemed a bit complicated, but your video shows its simple good work :-)
Thank you. I'm glad it helped
Very very helpful video. Thank you. The instructions were not clear and difficult to follow.
Thank you. Yes I agree the instructions were pretty vague
I bought this from Screwfix and found it excellent. It is a good bit of kit. I have just ordered another to give to my son as va birthday present for his garden. Like all these tools you have to have some competence to use them. It is very interesting reading swome reviews written by incompetents!!!! Thanks for this.
Thank you. I always take tool reviews with a pinch of salt I don't use this a ton but it's really handy for those times that I need it
Loved this unboxing, new supporter here 💚
Thank you ☺️
Excellent vid. The only thing is, it made me jump when you speeded the video up, as I thought it had started up inadvertently. :-0
I try to speed up the boring parts 😁
@@philscraftcorner understand :-)
Just set mine up in 10 mins. Thanks again.
I still don't understand the tensioning sequence. How does the nut that's hidden round the back relate to the tensioning? I am being thick but I dont get it.
It's been a little while since I last used this but from what I remember it moves the bar back and forward making the chain tighter and looser
There is a small "nub" that protrudes out of the saw. This is moved forwards or backwards by the tension screw. As described by Phil this slots into the bar and moves it forwards or backwards. So you are essentially tightening it by moving the bar away from the saw. There are two of these holes on the bar - the one that isn't getting used by this nub is the one used to pu,p the chain oil into.
Thank you
No problem at all
Thanks very much for the video Phil, very helpful. I've just purchased this saw and got up and running in no time following this guide. Seems a lot easier than going for a petrol saw as long as you have a plug within reach. I've seen a few people saying to check that tensioner after the first few cuts as the chain starts to bed in.
Thank you. I am glad it helped you set up :), Yes after about half hour use I had to tighten the chain again. But it still carried on cutting really well
@@philscraftcorner why did you not put the power cable in to its safety clip so you can not pull the cable out of the saw if it got snagged ????
Because. I guess I didn't think about that😅 but it's a very good point
@@philscraftcorner it could save your cable from pulling out of the saw if it was stood on i have 2 titan saw's a petrol and an electric i cut big fire wood every year never had a problem with both of them
Great tutorial!
Thank you ☺️
Very useful video, never realised you need saw oil and assembly of chainsaw. I was expecting to unpack and start using. I wish such equipment came ready to use and I could use such videos on improving my skill on usage of chainsaw :)
Some of the more expensive ones might come pre assembled for use.
I'm glad this helped you though
If you run the saw with no oil you'll destroy the chain and bar pretty quickly. The oil flows into the bar and onto the chain via one of the two holes at the back of the bar (the other is occupied by the tensioner) If your chain overheats because you didn't put oil in or the oiler is blocked the chain will stretch and the links could break - then you've got a nice whip that will strip your face off.
Good vid but ya talk too much
Thanks. I noticed I did that so I cut it right down in recent videos
phil's craft corner its all good mate i watched it as i just purchased the same chainsaw thank you for the video 👍🏻
I had just bought this a few days ago and decided while the kids are at school to assemble it! Like a previous Comment, I missed the lower hole where the chain holder lines up too!!! Your video is fantastic and Saved me a lot of time and frustration. I'm a first time buyer and user and wanted to make sure I have the assembly done correctly. I am glad that you have to assemble it, so that when you need to put a new chain on, you know exactly what you're doing, it's just a shame it doesn't come with a small sample pot of oil to get you going straight away, but I did buy the same chain oil that you were showing, now I will be putting the oil in, but will test it tomorrow when the weather it better. Thank you so much for this great video.
Glad the video helped so much, have fun and stay safe
Thank you very much for uploading this video. I just bought the same unit and your video saved me a whole heap of time reading the dull instruction manual. I set mine up in under 10 minutes, lord alone knows how long I would have taken without it. Good work fella
Thank you, I'm glad it helped :)
Just a little bit of advice. If your cutting logs. You are better using just the tip of the bar as you will have more control that way once your cut goes through. Excellent instructional tutorial. Well done 👏 👍🏻👌
Thank you for the information 😌
Thank you so much. I instructions on the book weren’t so clear to me. Your video helped me put my chainsaw together easily
I'm glad this helped so much. Have fun and be safe!
hi - just wondering how you sharpen / filesize?
Hi. I'm sorry I have no idea. I haven't needed to sharpen mine yet. But when it comes time I will definitely look into it
Thanks for the video. I initially missed the bit where the lower hole of the chain holder lines up with the tensioner. First thoughts after using it are good. However one very obvious downside is determining the oil level. It's very unclear.
Glad it helped I agree. I keep opening the cap to see if it's low before every use. The white plastic could be more transparent for sure.
Make sure to check chain tention every now and then too
Thanks for the advice and reaction to my comments.
Thanks explaining the chain oil bit in more detail. It's a little confusing at first and I overfilled mine before seeing your vid. I didn't notice any fill level line either and the fill viewer on the side doesn't show anything other than the minimum level.
It isn't very clear at first. Hope you managed to get it filled to the correct level
That's a good point, perhaps that's all the oil level indicator intends to show, ie the minimum level.
Hello Phil. Thank you very much for taking the time to make this video. I found the video VERY helpful. Best wishes. - Ahmed
Thank you. I am glad the video helped you ☺️
Thank you. I am glad the video helped you ☺️
When the video sped up I jumped (just at point when u were attaching chain! ) Lol
Excellent video. Thank you
You are welcome :)
Does any one know how to get hold of a spare tension screw and pin many thanks for any advice
Thank you
You are welcome
Great review mate cheers - picking one up today👍🏽 🪚
Thanks. Hope it works out well for you
Hello. I also have an identical one, only I don't have coal with it. Where can I buy them? Thank you for.
Coal?
collecting brushes
Awesome explanation- thanks a lot.
I'm glad it helped you :)
I feel like I’d chop off my arm just putting that thing together! I’m so clumsy when it comes to tools.
They are pretty dangerous if not used correctly, but the chain is fairly safe when it's not running
where did you get the mesh visor from
The visor was from screw fix as well I think it was around £12 😁
Thank you after posting the question. Good video.
This looks a total waste of time! You could cut this with a bow saw in 1/4 of the time, and you would not need to wear body armour.
I have cut a few branches off trees for friends and family and it's a breeze to use, I have also used a bow saw and ox Pro superfast.
In terms of ease and speed the ox Pro is great for high up cutting and the titan is a beast for 8" plus branches.
Bow saw was a huge pain to get into tighter spaces
@@philscraftcorner You are absolutely correct about using the bowsaw in a confined branchy area, I was really only comparing its use on an exposed log on the sawing horse, I think these electric powered chainsaws are really of use in the log shed when you have a log slightly to long for the woodburner, then it saves all the starting up of a petrol saw.
I'm all for making my life easier if possibe