dude you a life saver ... i bought the timing belt kit and a new water pump.. the mechanics are charging ridiculous prices to do the job ,with this video i can definitely do the job myself .. i just need to go over the video a few times
I got it done in my Figo when it was 9 yrs old n running around 60K only... visually the belt condition was perfect but still I got changed to avoid any risk.. thank you for video..
its a safe preventive measure to replace the flexible parts in vehicles. Its a good idea to check the belt for small cracks and it if there s...no second thought..just replace.
Hi great video. Just a question. It appears youhave dint tve timing belt replacemy without the use off a garage hoist, Simply jacks and stands .so its doable??
Hi! Thanks the video, it very useful! I did a very big mistake, I used the tensioners L shape pin to lock the flywheel when I want to reassembly the crank pulley. The little L shape pin does not fix the flywheel and somehow it falls to the flywheel in the transmission housing. Is there any way to remove it from there? I didnt see it under the car and didnt hear anything it just disappear when I pull the crank pulley bolt. Thank you very much!
Thats a trouble. Should have used thicker allen key to lock. One way is to remove starter motor, use a flexible magnetic holder and try to push it to the bottom of the housing. if lucky it gets picked and if not, you may want to take the gearbox out. ☹️
Great job. I've got to do this on my 1.4 TDCi Fiesta but I have to replace the front crankshaft oil seal so need to remove the bottom pulley completely. Is there an alternative way to lock the crankshaft without the pulley ?
Hi there, you can remove the pulley no worrys...just lock the flywheel remove the crank bolt and remove both pulleys....toothed pulley has tapper lock. Pull it out, replace the seal. make sure the timing ring stays strong attached to the toothed pulley...and put the pulley back and tight the bolt. Now remove the flywheel lock and set the timing locks accordingly. rest shows in the video.
@@dailyhandsdiy Nice one. I best get a timing belt ordered too although the car has only done 70,000 miles. It's a pain in the arse just to fix an oil leak but the front seal is leaking worse than the rear one now and i've got to pull the gearbox out as well to do the rear one 😭
Nice video . Can you please suggest a good workshop for ford in or around Pala, Kottayam. My figo Aspire tdci is noisy and vibrates too much . I dont want to go with dealer services. Thanks
Hi bro, thanks for all the amazing videos, I have an ecosport diesel 2019 model done 32k kms. There is some oil in the air intake hose. Is this normal for a car with low kms, please suggest what could be the issue and how to fix. Thank you
I have also changed the timing belt kit in figo 1.5 tdci, I have use ford genuine tensioner nd belt, the tensioner and bearing idler is manufactured by INA brand,and the belt is from Gates one. I bought tensioner nd belt in ford packing, and Bearing edler in INA packing
Also I guess the old figo 1.4 tdci nd new figo 1.5 tdci has the same Timing pulley tensionar and same bearing edler. The only difference is the belt. Am I right?
Great job friend. Hi I have a ford fiesta classic. When I turn on the AC, engine sound increases, it is definitely not fan sound. So thinking of changing 2 old injectors. Will this fix the engine sound issue after AC turned On. P.S - it is not compressor bearing pulley sound.
Normaly these engine make a lot of knocking noises especially when cold. And the one i handled, had one injector in trouble,thats why it makes abit louder noise
As usual, quality video bro! Is water pump replacement an easy DIY job ?!. thinking of doing a timing kit & water pump replacement myself 😋 with the help of your videos ofcourse!
Yes once the timing belt is removed you can easily take apart the pump. Remove the bolts give a gentle tap the pump comes off. Clean the surface re install the new pump with new gasket.
Neatly Done! You left no room for error and this is one of the critical Work. I always thought 6 rev of Crank Gear will re-align Timing marks. Are you sure it was 10 revs?
Just done my Defender. I could actually comfortably and fully get inside the engine bay and change the belt. Now I have to do it on my Fiesta. I think I better buy some chop sticks.
There's a spec ie for idler its 35 to 38 NM, tensioner 28 to 33NM, Crank bolt, tighten it as much as possible with hand or 150 to 180NM would do. Be carefull with the idler and tensioner bcs if you dont know how tight the bolt should be, will ruine the threads and make a big trouble.
Hey buddy, I've been facing gear shifting issues with my ford ecosport diesel 2018 model, there was an impact to the left bottom of the vehicle, ever since my gear shifting from 3rd to 4th is very hard. Any suggestions on how to fix it? Replaced the gear lever and cable but there's no change
Tyle pracy włożonej tylko dlaczego nie wymieniłeś pompy wody ile zaoszczędziłeś na tym, to jako stary mechanik ci powiem jak stanie łożysko w tej pompie a swoje już przelciało ile jeszcze wytrzyma nie wiadomo jeśli jednak stanie to cała ta twoja robota razem z silnikiem pójdzie na złom, gratuluję pomysłu i oszczędność pozdrawiam Andrzej.
So to replace the timing belt .we have to remove the drive belt and crankshaft pulley first , right ? . And then refit it after replacing the timing belt.
Yo bro, do you have any advise of how to clean enginebay, and under the car for oil (vw polo 1.2 TDI 2011). It is dripping oil underneath the car, and I want to clean the car to see where it comes from.
hey there bro, normaly ppl prefer waterless cleaning for dust and small oil spreading but extreme oil leaks spry diesel in pressure cans towards the engine bay or specific spot. As diesel wont conduct electricity you are safe with the wiring. Let it soak for some time and spray some petrol in pressure can. Try avoiding the petrol over flooding over orings or seal areas as petrol can react with rubber and lower the oring's life. This will wash away the oil concentration. just start the engine idle for 5 mins so the fuel residues will be vapourised by the heat. Now drive and look for the fresh oil leakage.
Normaly oil leaks from cam or crank shaft oil seals, oil cooler seals, vacuum pump orings, valve cover seals, ccv pipes or fitting, turbo housing and mostly the oil pan gasket or sealant.
Did i just notice an old piece of auxilary drive belt wrapped around the back of the oil pump pulley in step 13 @ 7m13s ? Surely that should be removed ?
After driving few kms im hearing noise from timing belt..does this mean i need to change the belt?. My car is 2013 model diesel ..now 75k kms driven .. recently changed drive belt complete set .
@@sanload123 drive belt complete set .. spare parts price alone 9 to 10k... For timing also around 7k for parts alone..this price is for Ford genuine accessories..
Brother is dis tdci engine is reliable one?? Whether it is costilier to maintain comparing other brands Toyota maruthi and tata how much kilometres can it go if we maintain properly????
Hi there brother, mine is almost 3 lkhs kms with stock engine, no replacements even turbo. If im lucky, guess it should go strong past 4 lk kms. Just care about the oil changes, good at 6k kms.
You might hear loud screeching and whining noise from timing side, if the belt is too loose, engine starting time increases also you may experience limited power.
Can the same parts(belt/idler/tensioner) used for changing drive belt setup(belt/idler/tensioner) which is just beside the timing belt setup ? If not can u share the part details ( part number etc) boodmo link if possible?
@@dailyhandsdiy hi i was telling about parts used in this video is for timing belt inside engine bay. So is the same parts can be used for drive belt set up(which also drives AC and other )
Well i guess not, there should be change in diameter of idler so the tensioner can't do its job, ie change in tension. belt used for ac is v belt and timing is toothed gear belt. overall they are seperate parts.
Friend I have one question, my ford fiesta after a stop when I drive and press accelerator, rpm does not raise, also car does not move and in few seconds becomes normal, mostly happens when AC is on. Is this related to Injector or diesel pump issue or accelerator pedal ? P.S : It works fine when driving at good speed.
brother i have ford fiesta mk6 1.4 tdci my problem is that whenever i start the car battery warning light comes on the dash but if i fully press the throttle all the way to 5k rpm it starts charging and light goes offf , plz help me to solve this issue . this problem started when i removed the battery
Hi there, do check the voltage across terminals with engine ON. It should be more than 13.5V. If its less there might be a chance for fault in alternator. Also make sure the terminals are tight.
Yup procedures n steps all same. The only difference will be the belt. 1.5 uses a bit shorter length belt than 1.4 because of change in HP pump pulley design.
Hey man I'm having trouble with my figo 1.4 tdci doesn't want to start, it's showing a flashing gear and I changed the faulty injector and crankshaft sensor but still won't start and I even changed the whole lockset of the car, please help
Its actually a preventive service at 1 or 1.2 lk kms. There's no particular sign. And sometimes you may hear a rumbling or screeching noise from timing side if the belt is hardened or the pulleys fail.
change my timing belt. After change Tha timing belt my car not starting and show me camshaft and crankshaft sensor not working properly and not starting
Hi it seems, you have done it with misaligned timing. If the timing misses even one teeth of belt, the car wont start. You may have to redo everything keeping the timing slots in place and make sure to rotate the engine 10 times at least and check the timing marks.
@@dailyhandsdiy I seem to have misaligned the timing. I rotated the engine 10 times,and the timing marks are off abit. can the timing be corrected by redoing the whole thing?
Its not necessary but as a preventive its changed. You could just wiggle the bearing or pulley and see if it has any play. if its tight and has no play, it should work good.
dude you a life saver ... i bought the timing belt kit and a new water pump.. the mechanics are charging ridiculous prices to do the job ,with this video i can definitely do the job myself .. i just need to go over the video a few times
Glad to hear from you brother.
How did it go?
Thanks for sharing your knowledge and expertise unselfishly, this is a very useful video as a 35-year veteran mechanic I learned something new today.
Made my day mate....😊😊
I got it done in my Figo when it was 9 yrs old n running around 60K only... visually the belt condition was perfect but still I got changed to avoid any risk.. thank you for video..
Recommended time for rubber belts should be around 5 years but till 7 wont cause much issue i guess. Any how glad to hear from you brother.
Please anyone knows where I can get the belt in ksa al Khobar
@@mohandasdas6017 no idea about Saudi Arabia🙂
@@dailyhandsdiy7 yearrs?
My Figo is 10 yrs old with 71k on the odo. I havnt done the timing belt changing . Is this a major problem?
its a safe preventive measure to replace the flexible parts in vehicles. Its a good idea to check the belt for small cracks and it if there s...no second thought..just replace.
Hi great video. Just a question. It appears youhave dint tve timing belt replacemy without the use off a garage hoist, Simply jacks and stands .so its doable??
Yes it's doable...only difficulty is to crawl down to remove the timing cover and support the engine.
Thanks for upload your video , exelente explanation without audio 😍
Glad to hear from you ☺️☺️
Hi!
Thanks the video, it very useful!
I did a very big mistake, I used the tensioners L shape pin to lock the flywheel when I want to reassembly the crank pulley. The little L shape pin does not fix the flywheel and somehow it falls to the flywheel in the transmission housing.
Is there any way to remove it from there?
I didnt see it under the car and didnt hear anything it just disappear when I pull the crank pulley bolt.
Thank you very much!
Thats a trouble. Should have used thicker allen key to lock. One way is to remove starter motor, use a flexible magnetic holder and try to push it to the bottom of the housing. if lucky it gets picked and if not, you may want to take the gearbox out. ☹️
Great job. I've got to do this on my 1.4 TDCi Fiesta but I have to replace the front crankshaft oil seal so need to remove the bottom pulley completely. Is there an alternative way to lock the crankshaft without the pulley ?
Hi there, you can remove the pulley no worrys...just lock the flywheel remove the crank bolt and remove both pulleys....toothed pulley has tapper lock. Pull it out, replace the seal. make sure the timing ring stays strong attached to the toothed pulley...and put the pulley back and tight the bolt. Now remove the flywheel lock and set the timing locks accordingly. rest shows in the video.
@@dailyhandsdiy Nice one. I best get a timing belt ordered too although the car has only done 70,000 miles. It's a pain in the arse just to fix an oil leak but the front seal is leaking worse than the rear one now and i've got to pull the gearbox out as well to do the rear one 😭
Amazing video. Thank you
Happy to hear from you 😊
Nice video . Can you please suggest a good workshop for ford in or around Pala, Kottayam.
My figo Aspire tdci is noisy and vibrates too much . I dont want to go with dealer services.
Thanks
Else is it possible to connect with you if you provide such services . Thanks
Hi there, din notice...im not familiar with pala n kottayam side wrkshop..havint heard from anyone yet. Im from koothattukulam.
Hi bro, thanks for all the amazing videos, I have an ecosport diesel 2019 model done 32k kms. There is some oil in the air intake hose. Is this normal for a car with low kms, please suggest what could be the issue and how to fix. Thank you
Hi there, the oil you see from engine breather hose. Its normal and need not worry.
@@dailyhandsdiy Thank you so much bro for clearing the doubt, I can be at peace now 😊
I have also changed the timing belt kit in figo 1.5 tdci, I have use ford genuine tensioner nd belt, the tensioner and bearing idler is manufactured by INA brand,and the belt is from Gates one.
I bought tensioner nd belt in ford packing, and Bearing edler in INA packing
Also I guess the old figo 1.4 tdci nd new figo 1.5 tdci has the same Timing pulley tensionar and same bearing edler. The only difference is the belt. Am I right?
Yes correct 💯
Hi mate when we need to change V belt for swift diesel ? Is it kilometer dependant or time dependant ? Its done 50k in 8 years
Either 50k kms or 5 years which ever comes first.
Great job friend. Hi I have a ford fiesta classic. When I turn on the AC, engine sound increases, it is definitely not fan sound. So thinking of changing 2 old injectors. Will this fix the engine sound issue after AC turned On. P.S - it is not compressor bearing pulley sound.
Hi there, if its the knocking noise you are referring to, it might be the injectors. If its like a hissing or whining noise,may be some other things.
@@dailyhandsdiy Hi, which part of India you belong.
Its kerala
Great video, thanks for the advice on this
Any time brother
Hello. Thank You for this video. How much time did it take?
hi there, it took me around 3 hrs with recording and adjustments. Normaly it takes nearly 2 hrs peak.
My 1.4 tdci 2002 fiesta engine sounds like yours, is that normal or is that a knocking engine?
Normaly these engine make a lot of knocking noises especially when cold. And the one i handled, had one injector in trouble,thats why it makes abit louder noise
Sir namaskaram....ford figo aspire diesel tdci timing belt change cheyali..best mechanic hyderabad please telme
Ops sry brother not much info in Hyderabad
How much cost for timing total kit
below 5k some makes can go beyond
You can tell you're in a warm climate. In the UK, every single nut would be seized with rust.
😅 here every year, its moderate shifting climate with 4 months rain, 3 months moderate cold, 4 months moderate hot, 1 month takes shifts with 3.
Así es que se debe mostrar el procedimiento, impecable!!!
As usual, quality video bro!
Is water pump replacement an easy DIY job ?!. thinking of doing a timing kit & water pump replacement myself 😋 with the help of your videos ofcourse!
Yes once the timing belt is removed you can easily take apart the pump. Remove the bolts give a gentle tap the pump comes off. Clean the surface re install the new pump with new gasket.
@@dailyhandsdiy sounds simple 😊 thanks bro! 👍
Anytime bro...
Do we need to change water pump along with timing belt?
It depends, just shake the pulley and check if it has a wiggle. If yes change it.
Neatly Done! You left no room for error and this is one of the critical Work.
I always thought 6 rev of Crank Gear will re-align Timing marks. Are you sure it was 10 revs?
Its actually 2 rev to realign the marks. We rev 10 just to make sure the tensioner is locked correctly and there's no change in timing setting.
Is the locking of the flywheel just to remove pulley? Can i just use my milwaukee gun to buzz it off?
Using an impact gun is not recommended for crankshaft bolts...use wrench and hand power.
Also when did you take the allen key pin out of the tensioner? When the belt was on ? @dailyhandsdiy
No, just took it out simply and adjusted to slip in belt. Could loosen it after the belt is secured...both way works and doesn't matter...
@@dailyhandsdiy thank you mate
Any time brother
After how many miles you change for the first time the cambelt?
1.2 Lakh kms..
how much timing belt kit costs, also if i can bring the vehicle to you how much in total it would cost me.please
material cost around 5k..also that depends on the dealer n location.
Just done my Defender. I could actually comfortably and fully get inside the engine bay and change the belt. Now I have to do it on my Fiesta. I think I better buy some chop sticks.
How do you know how hard you have to crank the bolts? Good and tight, by feel?
Hi which bolt are you referring to...
@@dailyhandsdiy the tensioners/ rollers etc
There's a spec ie for idler its 35 to 38 NM, tensioner 28 to 33NM, Crank bolt, tighten it as much as possible with hand or 150 to 180NM would do. Be carefull with the idler and tensioner bcs if you dont know how tight the bolt should be, will ruine the threads and make a big trouble.
@@dailyhandsdiy much much appreciated. Maybe it's time to buy a NM rench
Most awaited video bro , thanks 🙏🙏❤❤
Sure any time bro 😁
Hey buddy, I've been facing gear shifting issues with my ford ecosport diesel 2018 model, there was an impact to the left bottom of the vehicle, ever since my gear shifting from 3rd to 4th is very hard. Any suggestions on how to fix it? Replaced the gear lever and cable but there's no change
There might be an issue with gear selectors on the gearbox.
@@dailyhandsdiy Gear selector cable was changed without any improvement, do you mean inside the gearbox? The synchronisers?
Its the selecter levers infront of gearbox where the cables are cliped in.
@@dailyhandsdiy thankyou Will check
Tyle pracy włożonej tylko dlaczego nie wymieniłeś pompy wody ile zaoszczędziłeś na tym, to jako stary mechanik ci powiem jak stanie łożysko w tej pompie a swoje już przelciało ile jeszcze wytrzyma nie wiadomo jeśli jednak stanie to cała ta twoja robota razem z silnikiem pójdzie na złom, gratuluję pomysłu i oszczędność pozdrawiam Andrzej.
Hi, The pump was replaced recently due a leak in the housing. So replacing twice with that high price on the part, is not a feasible idea.
So to replace the timing belt .we have to remove the drive belt and crankshaft pulley first , right ? . And then refit it after replacing the timing belt.
Yup thats ryt.
@@dailyhandsdiy thx
Yo bro, do you have any advise of how to clean enginebay, and under the car for oil (vw polo 1.2 TDI 2011). It is dripping oil underneath the car, and I want to clean the car to see where it comes from.
hey there bro, normaly ppl prefer waterless cleaning for dust and small oil spreading but extreme oil leaks spry diesel in pressure cans towards the engine bay or specific spot. As diesel wont conduct electricity you are safe with the wiring. Let it soak for some time and spray some petrol in pressure can. Try avoiding the petrol over flooding over orings or seal areas as petrol can react with rubber and lower the oring's life. This will wash away the oil concentration. just start the engine idle for 5 mins so the fuel residues will be vapourised by the heat. Now drive and look for the fresh oil leakage.
Normaly oil leaks from cam or crank shaft oil seals, oil cooler seals, vacuum pump orings, valve cover seals, ccv pipes or fitting, turbo housing and mostly the oil pan gasket or sealant.
Did i just notice an old piece of auxilary drive belt wrapped around the back of the oil pump pulley in step 13 @ 7m13s ? Surely that should be removed ?
Yes you are right, there was some bits of belt threads wound around the fuel pump pulley...it was removed and fitted clean.
Nice video ! Complimenti ! Ciao :)
Thanks mate
Brilliant video
Thanks mate 😊
After driving few kms im hearing noise from timing belt..does this mean i need to change the belt?. My car is 2013 model diesel ..now 75k kms driven .. recently changed drive belt complete set .
Should check if the alternator belt or the timing belt is making noise. If its timing, should change it right away
Hi, what items are included other than (belt/idler/tensioner) in drive belt complete set .
@@sanload123 drive belt complete set .. spare parts price alone 9 to 10k... For timing also around 7k for parts alone..this price is for Ford genuine accessories..
@@Dilraj1436 Thanks for reply. So spare parts are the same what i mentioned in the comment ?
@@sanload123 yes..it is same bro..belt and 3 pulleys for drive belt..for timing chain 2 pulleys and belt
Brother is dis tdci engine is reliable one?? Whether it is costilier to maintain comparing other brands Toyota maruthi and tata how much kilometres can it go if we maintain properly????
Hi there brother, mine is almost 3 lkhs kms with stock engine, no replacements even turbo. If im lucky, guess it should go strong past 4 lk kms. Just care about the oil changes, good at 6k kms.
Thanks bro....
Bro how much does it cost for timing belt kit genuine part
Pls reply
its below 6k.
What are the symptoms of bad timing belt can u mention it please!?
You might hear loud screeching and whining noise from timing side, if the belt is too loose, engine starting time increases also you may experience limited power.
Awesome video sir 🙏👏👏👏💐💐💐🎉🥳
Gad to hear from you mate 😊
Bro nighalk workshop indo..
whatsapp at 7736331845
Great job bro👍
Thanks mate...
Have you ever had gen 1 figo tdci engine cutting out when clutch pedal is pressed in?
Would this be the same for a 1989 fesitvia ?
Dont think so unless its swaped with 1.4 tdci engine.
Can the same parts(belt/idler/tensioner) used for changing drive belt setup(belt/idler/tensioner) which is just beside the timing belt setup ? If not can u share the part details ( part number etc) boodmo link if possible?
Sry i din get what you told!!!
@@dailyhandsdiy hi i was telling about parts used in this video is for timing belt inside engine bay. So is the same parts can be used for drive belt set up(which also drives AC and other )
Well i guess not, there should be change in diameter of idler so the tensioner can't do its job, ie change in tension. belt used for ac is v belt and timing is toothed gear belt. overall they are seperate parts.
@@dailyhandsdiy thx for reply. Where can I get part nos to purchase online ?
Could search on boodmo site. just type in your car and model, they have oem catlogs with visuals. Can easily find the parts there.
Friend I have one question, my ford fiesta after a stop when I drive and press accelerator, rpm does not raise, also car does not move and in few seconds becomes normal, mostly happens when AC is on. Is this related to Injector or diesel pump issue or accelerator pedal ? P.S : It works fine when driving at good speed.
Try disconnecting the egr and drive. see if it improves anything.
@@dailyhandsdiy Hi egr issue also caused same problem few years back but this time I cleaned MAF sensor and issue resolved.
Glad its fixed.
Good job 👍🙏
Thanks man
Bro please mention spare parts price, it will more helpful to us...
Dear in 2008/09/10/11 diesel MODEL SXI FIESTA On DASH "CHK ENGINE" Light not present Only transmission light glow when switch on. Please reply 🙏🙏
The light must be busted. All vehicle have check engine light and malfunction light. Some have it as a single check engine light some seperately.
@@dailyhandsdiy when fuse remove show yellow light , but car not start. I will send video on Wapp ,thanks sir 🙏🙏
Sure any time
brother i have ford fiesta mk6 1.4 tdci my problem is that whenever i start the car battery warning light comes on the dash but if i fully press the throttle all the way to 5k rpm it starts charging and light goes offf , plz help me to solve this issue . this problem started when i removed the battery
Hi there, do check the voltage across terminals with engine ON. It should be more than 13.5V. If its less there might be a chance for fault in alternator. Also make sure the terminals are tight.
@@dailyhandsdiy how tight the terminals should be
Shouldn't be too tight..just wiggle and pull. its shouldn't come loose...
Is it same in 1.5tdci?
Yup procedures n steps all same. The only difference will be the belt. 1.5 uses a bit shorter length belt than 1.4 because of change in HP pump pulley design.
@@dailyhandsdiy thanks for the instant reply
Anytime mate 😊
What's the estimated cost for these parts ?
its around 5k
why does the high pressure pump also beeing aglined?
Its actually not that important, just aligned bcs the ford manual says so...newer tdci engines dont have a timing slot for h.pump...
@@dailyhandsdiy thank you
Hey man I'm having trouble with my figo 1.4 tdci doesn't want to start, it's showing a flashing gear and I changed the faulty injector and crankshaft sensor but still won't start and I even changed the whole lockset of the car, please help
What code was when the car was scanned?
Wen to change timing belt kit after how much kilometres?
Better change it at 1 lk kms
How to identify whether the timing kit needs to be changed or not ?
Its actually a preventive service at 1 or 1.2 lk kms. There's no particular sign. And sometimes you may hear a rumbling or screeching noise from timing side if the belt is hardened or the pulleys fail.
my fieasta above2500 rpm some time missing what reason
Do you have a check engine light
No notification cheak engine
change my timing belt. After change Tha timing belt my car not starting and show me camshaft and crankshaft sensor not working properly and not starting
Hi it seems, you have done it with misaligned timing. If the timing misses even one teeth of belt, the car wont start. You may have to redo everything keeping the timing slots in place and make sure to rotate the engine 10 times at least and check the timing marks.
Thanks
Anytime bro
@@dailyhandsdiy I seem to have misaligned the timing. I rotated the engine 10 times,and the timing marks are off abit.
can the timing be corrected by redoing the whole thing?
Hi, undo the tensioner remove the belt, adjust the timing redo the belt and tensioner.
How much price
Its almot 5k for parts
Cost for the parts???
5k plus gst
!!!the flywheel is to be locked all the time when setting the timing or only to unscrew the pulley and screw it in!!!
It should be locked all the time and only be removed after belt instalation.
👏👏👏👏
What part of the world are u in.. I hear parrots in background
Haha this place is called Kerala 😅😃
I won't alltonetor work.
Sry?
M
Is it really need to change the tensioner while changing the belt?
Its not necessary but as a preventive its changed. You could just wiggle the bearing or pulley and see if it has any play. if its tight and has no play, it should work good.