This is very interesting thank you. I have a 1070 stored because when I bought it my PC didn't detect it 85% of the time, perhaps it's worth checking with the multimeter
This was so complex. I would like to have two of these cards to run sli, but probably beyond my ability. Nevertheless good job. Maybe someday I will be able to rebuild two of these cards.
Just stumbled on your videos today I have to say very nice video you explained things in an easy to understand way. Took electronics in college some years ago im 50 now but just went a bought reflow station good MM and usb micro I have like 15 dead cards from the past and or working on pcs for years. I wanna get into repairing video cards and SSD drives. You Video by far taught me the most thus far. Would love to know where you get your schematics or info on what is where or did you just have to learn on your own. You keep mentioning the 10 series cards. So I assume you have a source. Any ways keep it up may become patron.
I worked at NCR in Failure Analysis to board level for quite a while. We repaired CPU and other computer boards but I have never seen one destroyed like this one. Great video on the repair. I know these video cards are in high demand but what kind of price would you charge someone who has done this to the board and then sent it in to you to fix not only what was the original problem but also having to correct someone's terrible try at a self repair. They would have been canned for work like this at NCR.
Hey man, great videos please keep them going! What gear do you use for your soldering? GPU pcbs suck a lot of heat so even with a preheater I have a hard time removing big components. Also out of curiosity, where are you based? Thanks again!
@@TechCemetery Ah that makes sense they're really good, I need to get myself one of those haha. I was hoping you'd be a bit closer I'm in the UK haha, not a lot of people fixing GPUs around here. Again, keep the videos going, I just found your channel and subscribed yesterday
Excellent video and nice work. I have the same GPU and PCB model but PNY manufacturer, I have an issue with the card and I found that there's no readings for VRAM voltage coil. I think that the controller for VRAM voltage is damaged but I can't find the model on internet
I have the STRIX-GTX1070-8G-GAMING card in my gaming machine. LEDs light up and turn on and off at regular intervals, but the fans don’t spin and there is no HDMI signal put out by the card
Awesome video. I have a 1070 ti that had a bit of liquid damage on the back of the PCB. I've already cleaned the card and it works perfectly fine...except the fans never spin up - even if I use Afterburner to manually set the fans to 100% I still get 0 RPM. I've tried swapping the fan from a known-good card over and same story. Any ideas where I should start? All components appear present and making contact.
I've a repair that I'm stuck diagnosing on that I'd live your help on. I've got a msi golden 980 ti that's fans spin and led lights turn on but no display. I tried running in the second slot of a working system but gpuz and device manager didn't detect it. My current speculation is that the core isn't being powered properly but I don't know how to verify that with my multimeter. Your repairs have been a great resource and keep up the good work.
Really impressive repair!! One question. How did you manage to find the short component on the memory? I guess you used voltage injection and flir or freeze spray. Can I use an 1.5 v aa batery? I dont have a lab psu.
I used voltage injection with a power supply. For a GDDR5 card, 1.5V should be fine but I've never tried an AA battery so I can't tell you if it'll work.
would of liked to see you inject voltage to see what got warm i have a shorted memory or memory controller inside the core would be nice to know what a safe voltage and amps to inject i was thinking 0.8v and 1 or 2 amp
Could you tell if the memory is bad and which ones. Could you say how to tell if the gpu is bad and how to test rash of the items. I have a few bad cheap cards and can't find any videos that go step by step on how to check and what to look for. Might you consider going step by step with explanations on what to look for and why. I am sure it would be long, but it could be very informative. Thanks
Thank you for sharing ur knowledge whit us again. Can u please make a video about, if the video card from amd, not nvidia, how can i check the memory banks, i think we can't use mats and mods at amd cards.
Hey buddy , Please make a video on adding display connector to a mining card or just swap a GPU core from a mining card to working card like from a Zotac p106-100 to a GTX 1060 6gb Mini as I think it much easier to transfer a BGA from one board to another than transferring the SMD's and connectors ... It would be great video and it will definitely add a lot of view and subs to your channel... Please consider making this video as this is a very hot topic that is discussed on many forums...
For cards like the P106-100, display cannot be added as it is believed to be disabled on the GPU itself. As for RX 470 mining edition cards etc, I'm just waiting to find a card.
Subscribed! You wouldn't happen to know the replacement part # for the 4 ferrite beads(inductors) that explode when R33 inductor burns up and the memory vrm mosfet blows. You mention it in the video so maybe you have a parts list handy... ha!
Also subscribed! I found something in internet that says for the L21 inductor (instead of the 4 beads) a value of 0.1uH. I have many GPUs with this same problem....You say this is often compined with a defect GPU?!? Is there a hope, if I replace the R33, the MOSFET Q13 and the inductors L21 (LB12, LB13,LB14,LB15)????
great video ;) enjoyed it! :) i have one question, i bought broken MSI GTX 1080ti. Card was stoping on B2 error. When i managed to press on it, it booted, it could run on 40-50% power/downlclock, but when in normal mode, after any load, it would show artefacts and crashed after 2-3seconds. I managed to repair it, basicaly using 3d printed support and finding right spot to support it. Now i played 500h+ (Witcher 3/Cyberpunk) with owerclock memory and 115% max core power with 0 crashes, basicaly now its working perfectly.. the card looked brand new and the PCIE slot also looked mint.. Question is, any idea what is with the card? .. the owner used it without support, so i think some copper lanes or solder joint got broken.. thank you very much for you answer :) ...ps: i bought it for 30euros, so im pretty happy man anyway.. guy who sold it, knows about computers more then i do :O but that i learned, after i already paid for it.. im asking because i would love to repair it and keep it or sell it and upgrade for RTX card, i can have those from mine job even now for great prices..
Usually with cards like that they suffer from either PCB bending or some form of PCB damage. There are a lot of data lines around the GPU for both the memory and PCIe lanes and sometimes they can become damaged and have micro-tears. For your card, that would be my guess - I'm not that sure as these kind of symptons/errors can be very hard to diagnose.
@@TechCemetery Thank you very much for your reply/answer .. I will keep it and will not touch it ..if it dies i will sell it as spares.. already got mine 30bucks of fun back :) Wish you best of luck with your channel, i will be watching all of your vids :)
I know there is alot if guys that has the 30 series card, I have a few, but I also have two evga xc3 3090's that are not working. The previous owner tried to shunt mod these cards, and it didn't work out. Love to send them to you and give you the opportunity to work on these cards. I would also send you some money to support your awesome channel
Holy hell, two 3090s?. I'd definitely look at it if you're willing to send them to me. I'll eventually have a donation/patreon page, I'm waiting to release a video soon which will be shared with another channel where I'll also announce a patreon etc. Do you have a preferred method of contact?.
Hi, I hope you'll notice, thanks for all your helpful and very informative videos, I subscribed to your channel. I have a question about Asus RX 580 4gb VRM, I found 1 Mosfet was shorted so I took it out properly and the short on the 8 Pin power is gone using a multimeter, however, the 1st 3 pins on the PCIe connector shows extremely low resistance around 160-170 ohms only, and the pad of the shorted mosfet is still shorted, reason why I did not place a new mosfet yet, where would you suggest for me to look further into? How should I trace where the short is originating from? Any help would be grreatly appreciated.
Hi so i have the same card and variant it was showing artifacts i checked it out and found out the problem was originated from the graphics card core/cpu can i do anything about that?
Hi ! I got shorts on all small capacitors on the upper side of the 2R2 1808 inductor . Can you help me please to find the reason ? 1.8v and pci 1.2v are missing too . On the left side of the gpu , the 5v and 3.3v are present .
Are we talking the Strix 1080? from r/hardwareswap?. Honestly $175 for a broken 1080 is pretty good in today's market, I would definitely have made the same choice you made.
This card is one very typical for one that is bought on ebay for a small sum as "parts" since those sellers normally just don't give a crap about them.
Hello, thank you for sharing your knowledge with us. I'm having trouble with my gtx 980Ti and i was curious if you've ever meet this problem with other gpu's. Mine isn't brick dead, it has video signal but it restarts my pc or it freezes it even if the pc is at idle or in full load. I have put my gpu in another pc and the behaviour is the same. Some times it restarts the pc even if it is at idle sometimes i play a game and it's ok an sometimes i open a game and it crashes. Can you please give me an advice on what to check? Thank you! In other order of ideas..did the owner of that gpu board played football with it?? So much physical damage...
And Idk but I would have removed damaged active components or at least put them back the right way before put power to the card so the damaged components wouldn't give fex any 12v or what ever straight into the gpu.
I have a nvidia 1080 ti, it boots up to desk top no problem but can't install drivers, I get something to the effect of"no nvidia hardware" more or less, during boot up it is not recognize as a nvidia card it is just blank, devise manager has it as a "standard video card" anyone ever hear of that???
This was awesome work and with proper thermal mods will run perfectly if the one cap is rewired. Not sure where it runs to but seems hdmi and not critical for vcc or pex. A little ultraviolet masking should keep the card trouble free. It seems you made this card valuable again but would not mine with it as I hate mining and think it is equivalent to growing corn to add ethanol to gasoline. It uses more energy to produce than is returned and ruins gasoline for small engines. Mining with cards wastes power and video cards and is a total waste of human resources and video cards.
Hey o/. STRIX 1080, 3V OK 12v 3x OK, 1,8V OK, 1V NOT OK . Different PCB so i cant find the 5V for UP9511p. 2V on UP9511P is OK. Memory Phase no Voltage. What would be the Next Step for Troubleshooting?
There is no next step, the 1V rail is disabled unless the GPU VRM is running. Check whether you have 5V on uP9511p. You can look up the datasheet and map the pin to a nearby resistor or capacitor and check for 5V.
@@TechCemetery Thanks! Looks like Powergood is Shorted for me 5VCC i Get 5V to Ground and also 5V to a nearby resistor; ISEN1 - ISEN8 is 0.03V ; 37th Pin is 1.8V (1.8V Enable Signal for 1V Rail) ; PowerGood (Pin38) is 0.011V PS: BTC & ETH Transactionfees are like 15 USD ^^ you have other Wallets to buy you an Coffee?
You might be remembering it wrong ( or maybe I've said it wrong in the video), but PGOOD (38th pin) is the Enable signal for the PEX rail. In either case, you have a problem with your GPU VRM or phase controllers. You'll want to check that you have a capacitor on the SS pin and that it's not short, and you'll want to check VREF is 2V, there will be a resistor nearby that connects to VREF. VREF is Pin 2 and SS is Pin 28. If neither of those tell you anything, check REFIN on a resistor, it should be between 0.8v roughly speaking. icware.ru/pdf/0004239.pdf
I have an email in the about section of my youtube channel. Send me a picture of the damage, and the rest of the board if you already have it disassembled.
Really helpfull. I have radeon 6770 1gig ddr5. It had memory phase low side mosfet short. I replaced it and now the external 12v connector short is gone but i donot have any orther voltages other then base voltages 12 and 3.3. I strongly suspect the 12 and 3.3 from bcie bus is short some where. Can u please send ur email address so that i can send the pics of graphic card. Any suggession would be helpful:)
On cards where some voltage rail shorts, it often pulls so much current that nearby/connected components get damaged. I'd expect the card to have 5V somewhere. I'd focus on that.
i have a 1070, the memory voltage is 0, and all the memory is shorted, I don't know what to do about it anymore hahaha. the gpu heats up but that's about it
sound like U'r having loads of fun! something 2 look forward 2! it's fun 2 take dead item's, and bring them back 2 life! frankencard! pcb repair! use jb wield! it's also nice 2 have a picture of the card,showing it naked!! YUP!! it's wonderful 2 see EE's fixing stuff! just wait till U get in2 chip encryption!! I think Utube keeps everything quite simple! watching people fall down stairs, & musical farts!!!good luck...
![[#2024MAMA] BIGBANG (빅뱅) - 뱅뱅뱅 (BANG BANG BANG) + FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/EQsYfiPR9uM/mqdefault.jpg)
![[#2024MAMA] ROSÉ (로제), Bruno Mars - APT. | Mnet 241122 방송](http://i.ytimg.com/vi/dgGqD28J6aQ/mqdefault.jpg)
Your repair videos are AWESOME. So far a few of them have really helped me out. Please keep these videos coming! They are so needed.
Subscribed. Eli Tech no longer making gpu repair videos but now I have you!
Eli tech is back just waiting from him to do some videos now 😂
Huh, what a highly damaged card you managed to repair!!! What a amazing job. Thanks a lot for sharing.
This is very interesting thank you. I have a 1070 stored because when I bought it my PC didn't detect it 85% of the time, perhaps it's worth checking with the multimeter
God tier!!!!!!!!!!!!!!!!! You just saved my 1080ti Gaming X 11gb today. THANK YOU!!!!!
I wasn't looking for a repair video but you gave an up-close description of the entire card and showed me what I was looking for. Thank you!
You are amazing. Thanks for sharing your knowledge.
This was so complex. I would like to have two of these cards to run sli, but probably beyond my ability. Nevertheless good job. Maybe someday I will be able to rebuild two of these cards.
So genuine guy.
What a nightmare. I wonder how all that damage occured.
I'd not even have considered fixing such a card, nice job
How can I get ahold of you about my 1080ti?
Great work and explanation on what your diagnosing. Keep the videos coming. Great to watch!!!
Great work! I am learning soo much from you!
you are amazing and it hurts me when i see those cards not properly repaired missing parts/pads and so on
Lol I love your attitude I've watched a few vids now and learning loads thanks man hero
Just stumbled on your videos today I have to say very nice video you explained things in an easy to understand way. Took electronics in college some years ago im 50 now but just went a bought reflow station good MM and usb micro I have like 15 dead cards from the past and or working on pcs for years. I wanna get into repairing video cards and SSD drives. You Video by far taught me the most thus far. Would love to know where you get your schematics or info on what is where or did you just have to learn on your own. You keep mentioning the 10 series cards. So I assume you have a source. Any ways keep it up may become patron.
I worked at NCR in Failure Analysis to board level for quite a while. We repaired CPU and other computer boards but I have never seen one destroyed like this one. Great video on the repair. I know these video cards are in high demand but what kind of price would you charge someone who has done this to the board and then sent it in to you to fix not only what was the original problem but also having to correct someone's terrible try at a self repair. They would have been canned for work like this at NCR.
Hey man, great videos please keep them going! What gear do you use for your soldering? GPU pcbs suck a lot of heat so even with a preheater I have a hard time removing big components. Also out of curiosity, where are you based? Thanks again!
I use a Quick 861DW hot air station. I live in the U.S.
@@TechCemetery Ah that makes sense they're really good, I need to get myself one of those haha. I was hoping you'd be a bit closer I'm in the UK haha, not a lot of people fixing GPUs around here. Again, keep the videos going, I just found your channel and subscribed yesterday
I used to use some cheap $50 Hot air station + soldering iron combo, but found it would often struggle to heat the board enough to remove VRM MOSFETs.
Wow, I would have binned that! Well done!
Very informative and you're very humble as well good stuff.
Once again great video dude. I truly enjoyed it. All the best to you
That mess would have gone straight into my parts bin. I admire your dedication, lol.
Thank you! this was very informative! Great repair job btw.
very easy to understand thank you so much bro
Great dedication indeed
Excellent video and nice work. I have the same GPU and PCB model but PNY manufacturer, I have an issue with the card and I found that there's no readings for VRAM voltage coil. I think that the controller for VRAM voltage is damaged but I can't find the model on internet
I have the STRIX-GTX1070-8G-GAMING card in my gaming machine. LEDs light up and turn on and off at regular intervals, but the fans don’t spin and there is no HDMI signal put out by the card
Great job and video like always
lovin these videos man love to see more
Hello. Do you have schematics for this card? I'm asking as with missing components you have to know some how their value to get right replacements.
He has cards for parts that he tests components on
Awesome video. I have a 1070 ti that had a bit of liquid damage on the back of the PCB. I've already cleaned the card and it works perfectly fine...except the fans never spin up - even if I use Afterburner to manually set the fans to 100% I still get 0 RPM. I've tried swapping the fan from a known-good card over and same story. Any ideas where I should start? All components appear present and making contact.
I've a repair that I'm stuck diagnosing on that I'd live your help on. I've got a msi golden 980 ti that's fans spin and led lights turn on but no display. I tried running in the second slot of a working system but gpuz and device manager didn't detect it. My current speculation is that the core isn't being powered properly but I don't know how to verify that with my multimeter. Your repairs have been a great resource and keep up the good work.
Usually with cards that have all voltage rails but an undetected GPU, you usually have a dead GPU or some problem relating to the PCIe lanes.
@@TechCemetery how would I indedify a pcie lane issue or that the gpu is dead. Thanks for the quick response
Check my RTX 2070 video
@@TechCemetery will do
@@TechCemetery I'll get back when I try my multimeter on the PCIe lanes
Yeah that repair was way too time consuming but again you won 😂
Had exactly the same card which was faulty. Have sent it back to EVGA since it was within the warrenty and they gave me an RTX 2070 Black Edition.
thats awesome actually.
hey man where do you find the specific components to replace? or the data sheets
subbed also, you have a very practial skillset !
Google, Aliexpress, Taobao, eBay etc.., there's no single "easy" way of identifying components.
Really impressive repair!!
One question. How did you manage to find the short component on the memory? I guess you used voltage injection and flir or freeze spray. Can I use an 1.5 v aa batery? I dont have a lab psu.
I used voltage injection with a power supply. For a GDDR5 card, 1.5V should be fine but I've never tried an AA battery so I can't tell you if it'll work.
Good INFO great fix 🤔how and where do I start if i wanna fix graphics cards any advice tu in advance
For a second there at the start. Instead of saying "Super Clocked" I thought you said "Super Fucked"
Both would have been accurate
Was this found in a trash bin somewhere? That things was a MESS!
im having trouble repairing a 1070ti armor 8gb. display fine. but when trying any benchmark a pop up window "d3d device being lost hung" appears
would of liked to see you inject voltage to see what got warm i have a shorted memory or memory controller inside the core would be nice to know what a safe voltage and amps to inject i was thinking 0.8v and 1 or 2 amp
Could you tell if the memory is bad and which ones. Could you say how to tell if the gpu is bad and how to test rash of the items. I have a few bad cheap cards and can't find any videos that go step by step on how to check and what to look for. Might you consider going step by step with explanations on what to look for and why. I am sure it would be long, but it could be very informative. Thanks
Check his latest upload
How can I contact you directly? Email ?
Why is it good that the 5 v rail to keep cycling?
Looks like the owner got angry with it, i love a challenge
i have same card with inno 3d version , the pcb got explode next memory phase from back , and now i have short on 12v in pci-e , can be fixed ?
Thank you for sharing ur knowledge whit us again. Can u please make a video about, if the video card from amd, not nvidia, how can i check the memory banks, i think we can't use mats and mods at amd cards.
Hey buddy , Please make a video on adding display connector to a mining card or just swap a GPU core from a mining card to working card like from a Zotac p106-100 to a GTX 1060 6gb Mini as I think it much easier to transfer a BGA from one board to another than transferring the SMD's and connectors ... It would be great video and it will definitely add a lot of view and subs to your channel... Please consider making this video as this is a very hot topic that is discussed on many forums...
For cards like the P106-100, display cannot be added as it is believed to be disabled on the GPU itself. As for RX 470 mining edition cards etc, I'm just waiting to find a card.
Subscribed! You wouldn't happen to know the replacement part # for the 4 ferrite beads(inductors) that explode when R33 inductor burns up and the memory vrm mosfet blows. You mention it in the video so maybe you have a parts list handy... ha!
Sorry I don't, let me know if you figure out what it is.
Also subscribed! I found something in internet that says for the L21 inductor (instead of the 4 beads) a value of 0.1uH. I have many GPUs with this same problem....You say this is often compined with a defect GPU?!? Is there a hope, if I replace the R33, the MOSFET Q13 and the inductors L21 (LB12, LB13,LB14,LB15)????
have you thought about making a patreon to support the channel ?
I have, but would prefer to avoid it for now.
2n7002 i think it was dual n-channel mosfet
great video ;) enjoyed it! :) i have one question, i bought broken MSI GTX 1080ti. Card was stoping on B2 error. When i managed to press on it, it booted, it could run on 40-50% power/downlclock, but when in normal mode, after any load, it would show artefacts and crashed after 2-3seconds. I managed to repair it, basicaly using 3d printed support and finding right spot to support it. Now i played 500h+ (Witcher 3/Cyberpunk) with owerclock memory and 115% max core power with 0 crashes, basicaly now its working perfectly.. the card looked brand new and the PCIE slot also looked mint.. Question is, any idea what is with the card? .. the owner used it without support, so i think some copper lanes or solder joint got broken.. thank you very much for you answer :) ...ps: i bought it for 30euros, so im pretty happy man anyway.. guy who sold it, knows about computers more then i do :O but that i learned, after i already paid for it.. im asking because i would love to repair it and keep it or sell it and upgrade for RTX card, i can have those from mine job even now for great prices..
Usually with cards like that they suffer from either PCB bending or some form of PCB damage. There are a lot of data lines around the GPU for both the memory and PCIe lanes and sometimes they can become damaged and have micro-tears. For your card, that would be my guess - I'm not that sure as these kind of symptons/errors can be very hard to diagnose.
@@TechCemetery Thank you very much for your reply/answer .. I will keep it and will not touch it ..if it dies i will sell it as spares.. already got mine 30bucks of fun back :) Wish you best of luck with your channel, i will be watching all of your vids :)
Thanks you man! BTW can you tell me why a card looses video signal when drivers got installed? Thanks!
An inability to install drivers is usually memory related.
I know there is alot if guys that has the 30 series card, I have a few, but I also have two evga xc3 3090's that are not working. The previous owner tried to shunt mod these cards, and it didn't work out. Love to send them to you and give you the opportunity to work on these cards. I would also send you some money to support your awesome channel
Holy hell, two 3090s?. I'd definitely look at it if you're willing to send them to me. I'll eventually have a donation/patreon page, I'm waiting to release a video soon which will be shared with another channel where I'll also announce a patreon etc. Do you have a preferred method of contact?.
@@TechCemetery how do I contact you, I can send them asap
@@TechCemetery phone call would be awesome
My email is now listed under the "about" section in my channel. Send me an email and I'll reply with my phone number.
@@TechCemetery awesome will do immediately
Good lord, previous owner went totally crazy on that card. How's someone be that irresponsible?
Hi, I hope you'll notice, thanks for all your helpful and very informative videos, I subscribed to your channel. I have a question about Asus RX 580 4gb VRM, I found 1 Mosfet was shorted so I took it out properly and the short on the 8 Pin power is gone using a multimeter, however, the 1st 3 pins on the PCIe connector shows extremely low resistance around 160-170 ohms only, and the pad of the shorted mosfet is still shorted, reason why I did not place a new mosfet yet, where would you suggest for me to look further into? How should I trace where the short is originating from? Any help would be grreatly appreciated.
You should hook up your power supply to your PCIe 12V rail, it's can be very hard to find a short without one.
Hi so i have the same card and variant it was showing artifacts i checked it out and found out the problem was originated from the graphics card core/cpu can i do anything about that?
What a trainwreck. Well done.
Hi ! I got shorts on all small capacitors on the upper side of the 2R2 1808 inductor . Can you help me please to find the reason ? 1.8v and pci 1.2v are missing too . On the left side of the gpu , the 5v and 3.3v are present .
A short on the 1.8V rail usually indicates a dead GPU.
@@TechCemetery Thanks for your advice . But i still hope to fix that card . I realy like it .
Wish I could have seen you fix that 1080 I had lol. I still don’t know if he was able to fix it he just said he received it
Are we talking the Strix 1080? from r/hardwareswap?. Honestly $175 for a broken 1080 is pretty good in today's market, I would definitely have made the same choice you made.
@@TechCemetery it was the 1080ftw for $75
But yeah from hardwareswap
@@melvinhans1844 Oh, now I feel like I missed out. Maybe next time!.
@@TechCemetery yeah I didn’t know the market was so wild when I posted it lol. You were third in line at the time
Should collab with Louis Rossmann!
This card is one very typical for one that is bought on ebay for a small sum as "parts" since those sellers normally just don't give a crap about them.
Can't decide if this was a donor card or if some one was throwing it for their dog to retrieve .
Velociraptors. Definitely velociraptors.
i give the like before i even watch :D
Hello, thank you for sharing your knowledge with us. I'm having trouble with my gtx 980Ti and i was curious if you've ever meet this problem with other gpu's. Mine isn't brick dead, it has video signal but it restarts my pc or it freezes it even if the pc is at idle or in full load. I have put my gpu in another pc and the behaviour is the same. Some times it restarts the pc even if it is at idle sometimes i play a game and it's ok an sometimes i open a game and it crashes. Can you please give me an advice on what to check? Thank you! In other order of ideas..did the owner of that gpu board played football with it?? So much physical damage...
I generally don't work on 980 Tis, but from memory this can sometimes be related to EN disappearing on the GPU VRM phase controller.
@@TechCemetery When you say EN you mean what?
And Idk but I would have removed damaged active components or at least put them back the right way before put power to the card so the damaged components wouldn't give fex any 12v or what ever straight into the gpu.
I have a nvidia 1080 ti, it boots up to desk top no problem but can't install drivers, I get something to the effect of"no nvidia hardware" more or less,
during boot up it is not recognize as a nvidia card it is just blank, devise manager has it as a "standard video card" anyone ever hear of that???
Subscribed, nice video!
Thank you for the video.
This card has seen a nightmare 😂
IS THAT A CAPACITOR? (omg, let me get that off of there)
Somebody PLEASE send this man a proper LCR meter.
This was awesome work and with proper thermal mods will run perfectly if the one cap is rewired. Not sure where it runs to but seems hdmi and not critical for vcc or pex. A little ultraviolet masking should keep the card trouble free. It seems you made this card valuable again but would not mine with it as I hate mining and think it is equivalent to growing corn to add ethanol to gasoline. It uses more energy to produce than is returned and ruins gasoline for small engines. Mining with cards wastes power and video cards and is a total waste of human resources and video cards.
good job
Where's your com port of the multimeter plug into on the card?
Com port? What com port areyou referring to? Multi meters don't have serial com ports and nor do graphics cards.
@@mjyanimations1062 Ahaha, Multimeter common ground!
Oh yeah. The ground rail of the gpu isconnected to the mounting bracket. The meter's negative probe is connected to the ground of the gpu
Daaaamn the GPU looks like it was a construction site for a 4yo kid
Hey o/. STRIX 1080, 3V OK 12v 3x OK, 1,8V OK, 1V NOT OK . Different PCB so i cant find the 5V for UP9511p. 2V on UP9511P is OK. Memory Phase no Voltage. What would be the Next Step for Troubleshooting?
There is no next step, the 1V rail is disabled unless the GPU VRM is running. Check whether you have 5V on uP9511p. You can look up the datasheet and map the pin to a nearby resistor or capacitor and check for 5V.
@@TechCemetery
Thanks!
Looks like Powergood is Shorted for me
5VCC i Get 5V to Ground and also 5V to a nearby resistor; ISEN1 - ISEN8 is 0.03V ; 37th Pin is 1.8V (1.8V Enable Signal for 1V Rail) ; PowerGood (Pin38) is 0.011V
PS: BTC & ETH Transactionfees are like 15 USD ^^ you have other Wallets to buy you an Coffee?
You might be remembering it wrong ( or maybe I've said it wrong in the video), but PGOOD (38th pin) is the Enable signal for the PEX rail. In either case, you have a problem with your GPU VRM or phase controllers. You'll want to check that you have a capacitor on the SS pin and that it's not short, and you'll want to check VREF is 2V, there will be a resistor nearby that connects to VREF. VREF is Pin 2 and SS is Pin 28.
If neither of those tell you anything, check REFIN on a resistor, it should be between 0.8v roughly speaking.
icware.ru/pdf/0004239.pdf
@KGTHEDEEJAY TZ Bring it to a repair shop and have them change the two bad memory modules.
Regards .
My gtx1080ti runs about 10 minutes and then suddenly Lost communication , msi after burner don't show any data. Help me please
Do the fans start spinning at max speed when the connection is lost?.
What the hell was the previous owner doing to this poor card?
Thanks
I'm looking forward to MATS tutorial ;)
How much do you charge to fix them?
I have some cards for you to fix please help!
got a gigabyte 2070 super with pcb damage near the power socket wondering if ur willing to try a repair on it ^_^
I have an email in the about section of my youtube channel. Send me a picture of the damage, and the rest of the board if you already have it disassembled.
never let your tiger play with your gpu
Pack it up. Definitely oven bake gone wrong
How I can send you my 1070 ti for fix?? Thank
My email is listed in the about section of my youtube channel.
Thanks 😊 I send you at mail of ready
whats the program for memory testing?
MATs, I have a guide video on it.
@@TechCemetery Tks a lot, cheers from brazil!
Nice
Really helpfull. I have radeon 6770 1gig ddr5. It had memory phase low side mosfet short. I replaced it and now the external 12v connector short is gone but i donot have any orther voltages other then base voltages 12 and 3.3. I strongly suspect the 12 and 3.3 from bcie bus is short some where. Can u please send ur email address so that i can send the pics of graphic card. Any suggession would be helpful:)
On cards where some voltage rail shorts, it often pulls so much current that nearby/connected components get damaged. I'd expect the card to have 5V somewhere. I'd focus on that.
love this get humor
i have a 1070, the memory voltage is 0, and all the memory is shorted, I don't know what to do about it anymore hahaha. the gpu heats up but that's about it
how could someone do that to a 1070ti :(
omfg thats HORRIBLE, what a MONSTER!! How could someone be so careless!
That card was given another chance by you thankfully, it deserved it too.
sound like U'r having loads of fun! something 2 look forward 2! it's fun 2 take dead item's, and bring them back 2 life! frankencard!
pcb repair! use jb wield! it's also nice 2 have a picture of the card,showing it naked!! YUP!! it's wonderful 2 see EE's fixing stuff! just wait till U get in2 chip encryption!! I think Utube keeps everything quite simple! watching people fall down stairs, & musical farts!!!good luck...
sh......t how much damage ...
A cheated wife made this mess.
dont forget to use mask for all that
The Graphic card was butchered!!
2n7002__ most generic little mosfet... Made by many and used an many things.
24.9 lolololol
Appreciate your work, but your language friend, please clean up your mouth. God gave you great potential, and you should learn to respect him. Thanks