Nice 640 ford tractor. I have a 1955 650 ford tractor. You have a 4 speed transmission & I have a 5 speed transmission. If you have trouble with implement swing back & forth a set of sway bars will stop that. Watch the belly bar & driveshaft. I had the problem with a 4ft bush hog & my tractor had good brakes. Tractor supply has sway bars.👍🚜🚜🚜
Thank you! Mostly I use mine with a 6ft but behind mower and sometimes the brush hog. I don't have too much trouble out of it but don't use it as much as I should.
great vid. I justr purchased the same tractor a few weeks ago. It's all up and running now. gonna be getting that over run this weekend if they have one in stock! :D
@@lazypondfarm ok so this is how much of a novice I am. I was trying to figure out why the implements that I purchased, had long shafts. Turns out I had an overrun on the 600. Thanks for pointing it out and showing what it does. I have a 5 ft grass hog and a 5 ft rototiller along with a post-hole digger. :D Take care. By the way, I put in an electronic ignition. It just purrs when it starts now. I do need to tune it up but I will figure that out this week. I thought I may be having a problem with it bogging down but I believe I had too much down ward force on the back end when I was in low gear. Still have issues with fuel but will figure that out as I go.
I am a big time novice! However if you have any questions feel free to ask on a video or hit me up on Facebook! I have the brush hog and disc harrow for mine but really want to get more implements to use around our little farm. Mine runs pretty strong but I've got to address my cooling system problem. Hope to do it in January when Hunting season is over and there aren't many projects going on.
Was the roll pin inside the over run PTO Clutch originally and you removed it prior to filming ? Did you have to drive it out? If not, where did it come from?
My Jubilee has the number of links of chain on each side at 8 and 7 just as you have installed yours. Is that for a reason the 8 and 7 or was that an accident and it just turned out that way. I have wondered whey my old tractor has one more link on the left than right.
I think this is the best video I have come across about pto. Do you know if someone can use an Wood mill stump grinder on an pto for an old 601 ford work master. Thanks in advance!
Nice work, but wondering why you don`t have any stabilizer arms on each side? I realize that your chains help a bit, but those arms are much more effective. I see the hardware for them by the wheels.
Money well spent Kevin. You can never go wrong pulling a little bit of maintenance. Good job
Got a LOT more to do 😅
I love this!!! Show more of the RUclips Tractor and fixing it up!!! Great job Bo!!!
Thanks brother!
Nice 640 ford tractor. I have a 1955 650 ford tractor. You have a 4 speed transmission & I have a 5 speed transmission. If you have trouble with implement swing back & forth a set of sway bars will stop that. Watch the belly bar & driveshaft. I had the problem with a 4ft bush hog & my tractor had good brakes. Tractor supply has sway bars.👍🚜🚜🚜
Thank you! Mostly I use mine with a 6ft but behind mower and sometimes the brush hog. I don't have too much trouble out of it but don't use it as much as I should.
These are great to stop being pushed forward after clutch is pushed
Great video. Very helpful. Thank you sir.
Glad to help! Working on another tractor video now!
I would have put grease on the shaft before being installed. That’s just me. More grease the better.
It's been greased lol a LOT
Good deal, thanks for showing!
Glad to help!
great vid. I justr purchased the same tractor a few weeks ago. It's all up and running now. gonna be getting that over run this weekend if they have one in stock!
:D
Makes it so much safer!
@@lazypondfarm ok so this is how much of a novice I am. I was trying to figure out why the implements that I purchased, had long shafts. Turns out I had an overrun on the 600. Thanks for pointing it out and showing what it does. I have a 5 ft grass hog and a 5 ft rototiller along with a post-hole digger. :D Take care. By the way, I put in an electronic ignition. It just purrs when it starts now. I do need to tune it up but I will figure that out this week. I thought I may be having a problem with it bogging down but I believe I had too much down ward force on the back end when I was in low gear. Still have issues with fuel but will figure that out as I go.
I am a big time novice! However if you have any questions feel free to ask on a video or hit me up on Facebook! I have the brush hog and disc harrow for mine but really want to get more implements to use around our little farm. Mine runs pretty strong but I've got to address my cooling system problem. Hope to do it in January when Hunting season is over and there aren't many projects going on.
Fires up nicely
Yea she does+
Was the roll pin inside the over run PTO Clutch originally and you removed it prior to filming ? Did you have to drive it out? If not, where did it come from?
My Jubilee has the number of links of chain on each side at 8 and 7 just as you have installed yours. Is that for a reason the 8 and 7 or was that an accident and it just turned out that way. I have wondered whey my old tractor has one more link on the left than right.
Good afternoon my amazing friend
Good afternoon my brother!!!!
Fun watch :) that was helpful Thanks
Good work mate🍺🍺
Diggin the tractor
Meeeee too!
Put some nitro boosters on that tractor get work done twice as fast. 🚜 💨
Lol she is fast in 4th gear lemme tell you!
Great video
Thanks brother
I think this is the best video I have come across about pto. Do you know if someone can use an Wood mill stump grinder on an pto for an old 601 ford work master. Thanks in advance!
Thank you! To be honest I am not familiar with that attachment I'm sorry!
Nice work, but wondering why you don`t have any stabilizer arms on each side? I realize that your chains help a bit, but those arms are much more effective. I see the hardware for them by the wheels.
Are Zerks a pipe thread?
I use antiz on it and take it off after using it
Just hate it when I can’t adjust the plows etc
🐝🐝🐝
No stabilizer bars is what is missing to keep straight plowing
Second!!!
You are always first
@@lazypondfarm Wow wow wow. . .
😮
👋
Safety third
Is that chain really extra if you need it
😆 had to go back and watch you struggle with that pin
Lol which pin?
@@lazypondfarm at the point in time it was the one you broke the grinder out for🤣
@@lazypondfarm before I forget if it don't fit for sit if it breaks she needed a new one anyway
What size is your brush hog?
6 foot I believe
I know about as much for fixing tractors as you do about Beekeeping. .
Hahahahhaha
Afternoon guys
Hey Jake!
@@lazypondfarm haha. You need a BFH
@@NoneyaTexasontheback20 I got one lol.... I was being careful
@@lazypondfarm 🤣😂
That tractor is missing something
What's it missing?
It’s missing a ginger beer
A super cool homesteading northern Michigan sticker
I haven't riden it while drinking a Ginger beer yet 🤔
Stickers on my tractor!