I simply cannot believe it is this easy. Thank you for making it seem so doable, I am definitely going to tackle this project! Thank you SO much for posting!
Santo. Refil House, nunca vi uma exposição e explicação pacienciosamente pela forma do início ao fim. Como também uma pessoa instalando um bulk passa a passo, e com serviço sendo limpo a cada resido de tinta que ficava. Outro por menor, com um fundo de música a um bom nível, sem falatórios repetitivos e escandalosos. Parabéns.
1) Is this video applicable for HP 2675 ?. 2) Is there an order in the tubes for specific colors. Which tube goes into which color? 3) The hole on the printer wall is made on the left side. Is that on purpose?
The ink tank needs to be at what level to the printer,how many inches does the printer need raised,I was thinking the tanks needed to be level above cartridges but I keep seeing below cartridges?....IMPORTANT TO ADD OR IT WONT WORK PROPERLY
This really shows how much we're taking it in the ass by the buying those expensive cartridges...i have not used inkjet since the late 90's though...it always dries up on me and i have to toss the printer....no such problem with todays affordable lasers...
Good video & great information. But HP 2677 , 680 black & 680 colour cartridge can be refilled only twice after that having printing more than 300 pages, cartridge stops working even if it has ink left. Unable to reset ink level for HP All in one 2677 printer ( firmware cartridge locked). So CISS system is not possible..
Спасибо! Получилось идеально для HP 3635!!! Картридж 652!!! Нижний уровень чернил находится на 20 см ниже уровня картриджей! Только так работает! Иначе - перелив!
In bottle top end, have a Specially designed - Tiny air-pressure balance device between an ink cartridge and an ink bottle, you can download www.refillhouse.com//Download/Tiny_air-pressure_balance_device_US007364281.pdf Ink in the ink bottle, from the highest ink level to the lowest ink level, can maintain a balance, not leakage of ink. or link to www.refillhouse.com/index.php?route=product/product&path=18_45&product_id=211 On the left upper corner of your window, you can change language to English and currency. On the English website, You can also translate English into any language by the google translate option.
I have following doubts, if you can help me with: Q.1) Placement of Ink Tank:-- Should the ink tank be place at the level of the printer, above it or below the level of the printer. I suppose below is a definitely no here as the ink flow in cartridge will not be possible if the ink tank is below the surface level of the printer. "So should the ink tank be above the printer or at the same level on which printer is placed???????" Q.2)Print quality of the aftermarket refill ink:-- Print quality of most of the aftermarket inks that are filled in the CISS system are very faded and dull. Please suggest the best quality aftermarket refill ink(If its only sold in your area, will you be able to ship some stock for me). If not, Can I use original refills bottles of other companies like canon, or original HP refill inks like HP GT51 and GT52 Q.3)Rubber plugs on Ink Tank :-- There are four rubber or plastic plugs for four ink containers. Please confirm if they are supposed to be closed or open during the printing operation? Q.4) Printing frequency:-- Is it really mandatory to print at least one b&w and color page daily so that the ink in cartridge do not dry and clog the cartridges Than you
Q1A: The use of different regions, CISS system differences, how many centimeters printer to raise? I can not give you the correct answer The only way is to, 1. The first high pad printer height of 5 cm, it is recommended to use a slice of each centimeter plate, or magazine 2. Print a 8k/Photo image (google search 8k photo), printing solution using the best resolution, paper selection photo paper 3. Print on plain paper, 4. Carefully observe the printer height of 5 cm high pad printing results, if there is ink, it is necessary to reduce the height of the printer into 4 cm, 1 cm and 1 cm individual observation, you will be the answer. Q2A: You can choose a compatible fill ink, or the original HP GT51 and GT52. Q3A: You should refer to the balance system on the ink bottle on the above Video, is our design and use a long time(more than 12 years), you can download the technical description U.S. Patent - US007364281 Title: Tiny air-pressure balance device between an ink cartridge and an ink bottle www.refillhouse.com/Download/Tiny_air-pressure_balance_device_US007364281.pdf Q4A: good ink and balance system is no problem, do not need so hard; as long as the power not to be removed, two weeks can be printed one. other information please ref. www.refillhouse.com/index.php?route=product/product&path=18_45&product_id=215 ruclips.net/video/g126wa1A-3c/видео.html
Hi! I have the same question as #1. Have you managed to figure it out? This is working on the Marriotte Bottle principle and am just worried that if the ink tanks are lower than the cartidges, ink will just flow back(?!). The guy’s reply to your question is not reallt clear. Based on your experience, how did you do it? Thanks.
how about the counter.if the cartige is empty machine does not work anymore,so new cartige is needed ,also the counter once it reaches120 or so printed pagesi machine is alted till new cartige is installed.
Disculpa será que se puede instalar ese sistema de tinta continua en hp deskjet 2775, si se puede me podrías mandar el link donde o conquien adquirir ese producto... gracias
Thank you for your efforts and God bless you. I am in Togo, could I find this CISS kit here? If possible I want to order for the HP deskjet 2700. Please what is the price? Thank you and I look forward to your response
the cotton is inserted to use capillary system, so the ink can be absorbed by the cotton when needed from the bottles... And the solution he was using in the beginning is alcohol I guess ! not sure but it might be this, to clean the material...
For a long time (I had a C4280 for 14 years) HP printers were already excellent, but today I suffer on the skin with a multifunctional external ink tank (GT 5822) that with little use and 16 months of use failed to recognize the black head, and I can't buy a new head (I got it after a long time but it still didn't work) or technical assistance. According to HP technical guidance I will have to send to São Paulo because in Rio de Janeiro there is no technical assistance. I will still have to pay for shipping and return without counting the amount of the repair (becoming unfeasible). The printer is now 1 year and 9 months old and is now only for paper weight. Consumer advice, do not buy HP brand as you will be adrift with the equipment. Por muito tempo (tive uma C4280 durante 14 anos) as impressoras HP já foram excelentes, mas hoje sofro na pele com uma multifuncional tanque externo de tinta (GT 5822) que com pouca utilização e 16 meses de uso deixou de reconhecer o cabeçote preto, e não consigo comprar um cabeçote novo (consegui depois de muito tempo mas continuou sem funcionar) e nem assistência técnica. Segundo orientação técnica HP terei que enviar para São Paulo pois no Rio de Janeiro não tem assistência técnica. Terei ainda que pagar o envio e o retorno sem contar com o valor do conserto (ficando inviável). A impressora está agora com 1 ano e 9 meses de uso e agora só serve para peso de papel. Conselho de consumidor, não compre marca HP pois ficará a deriva com o equipamento.
Sir you can copy the hp GT series ink tube position .hp GT series prienters & hp 3635 design are same . In this process Prienter create unwanted nosie which happened with my HP deskjet 3835 .I watched your video & when I was installing the system I mount the inkTube below scanner . It's create some unwanted noise when Prienting then I copy the hp GT series ink tube position ,after doing that the inktube didn't touch Prienter inside parts & no extra noise.you have to do only one more rectangular hole on the middle top plastic of ink cartridges access door and a insert T shaped attachment below scanner
Thanks for your advice. In addition to the content of our sales tools, we have added tools that will allow buyers to use them more; For the problem of extra noise, you can use the foam to stick it under the scanning board, and any problems that occur can be easily eliminated.
ого. класс. я из кбинета такой шлейф в спальню проведу... в стену можно заштробится и замазать. чтоб заправлять можно было перед работой. не вставая. а то мороки столько со шприцем этим
thanks for helping us my friend , in my case you helped to me , you are a patient man for teaching but thanks a lot , Congratulations it's a great video
In my HP 2623 I did this and after printing few pages, it stopped recoginising the cartridge. I am unable to reset it. I bought new black cartridge and its printing black fine. But color cartridge not working. I ended up wasting money and no color print now. Tell me if its possible to reset in HP 2623. I have followed many videos on youtube for this but nothing worked so far.
Чего то я не понял, зачем в цветном картридже надо было сверлить отверстие, чтобы потом его заткнуть заглушкой? Второй момент, на хрена протаскивать весь шлейф слева направо если можно справа налево вытащить малую часть! Следующий вопрос, зачем использовать шлейф на 8 если нужно на 4, и соседняя прорезь в кронштейне как раз для четырех, только надо было его перевернуть соответственно. Почему в цветном картридже одна трубка с уплотнителем, а остальные 2 без? Для чего нужно было трубки обрезать под углом?
The color ink cartridge is drilled with one hole, video time 36:24. When the ink cartridge is maintained, the ink is injected into the ink cartridge to discharge the air. The tube is a thin tube, and the inks have 8 colors, which is used until now; Use 4 rows of tubes, retain 8 rows, is to provide a smoother tube swing.
Hi Boss, How are you ? I want to wire a Canon PIXMA MG2550 for the external anchors with pipes like what you did with the HP Deskjet 2130, 2135, 3630, 3635, 4720 CISS - HP 63, 302, 123, 803; HP 664, 680, 652; HP 46 Please, is it possible with your method really? I am waiting for your answer tonight or tomorrow to do this on Monday morning. Thank you very much for your simplicity. I leave you my mailbox. Very cordial,
Lo felicito, muy buen tutorial. Hay cosas como: 1) La música, que pudo colocar algo mejor. 2) El hilo, debió explicar aunque sea por caracteres, para que es. 3) Las manguera, porque tan ancha, si solo utilizara cuatro colores.
esa maquina no tiene bomba para succionar osea no llega tina de los tanques a los cartuchos y si dices que es por gravedad no se puede o empieza a gotear el cartucho segundo a las 150 impresiones se quema el chip del cartucho 3 el vídeo esta bien hecho pero la maquina no va a funcionar he dicho caso cerrado
Hola CARLOS ANDRES PARRA LOPEZ, la impresora no tiene bomba de succion pero, los inyectores al aplicar la tinta ejercen un trabajo de succión y jalan la tinta de los tanques de tinta hacia los cartuchos. Los cartuchos deben quedar alineados con la impresora como se muestra en el video. Los cartuchos y las mangueras deben quedar sellados, porque si jalan aire la tinta no sube. yo me oriente con el video y puse a funcionar mi impresora con sistema continuo. Funciona de maravilla, porque los cartuchos solo te rinden como para unas 50 a 100 páginas y te toca recargar el cartucho o comprar uno nuevo. Con este sistema puedes imprimir la cantidad de hojas que tu quieras. Debes tener en cuenta que estas impresoras son caseras por lo que debes dejarlas reposar unos minutos despues de haber impreso unas 100 a 150 páginas. Mi esposa está feliz porque ahorramos mucho dinero en tinta y cartuchos porque las recargas aquí en colombia son un hueco sin fondo. Debes tener en cuenta también que Hewlett packard hace cartuchos bastante comerciales por lo que despues de unas 2000 a 3000 impresiones de los cartuchos estos pueden deteriorarse pero aún así se ahorra mucho dinero.
Lots of work better buy tank printer but anyways good work and can you tell me that all the accessories used comes along with kit or we have to buy separately?
We are providing simple, correct technology that you can easily install it, we consider the factors that are not installed for hours, or days of printing, what is more important is the problem of the natural fall of the pipe. You can follow your living area, get similar materials, and then adjust the height of the printer, you can do it well. You can also buy parts as we buy parts, buy local ink.
Please upload video on how to install CISS system in HP 3835 printer!! waiting for the same for over a month when u said it will be uploaded soon. kindly help us with the same!
Refill House-填充小站-噴墨印表機-墨水-連供-改機-連續供墨-解碼-修復-填充專家 thanks! I took 3835 printer that day by asking CISS on that, now my ink cartridge are coming to over. that's why looking forward for CISS as soon as possible.
CUAL ES Y COMO ELIMINO EL ARCHIVO , DEL PROGRAMA DE LA IMPRESORA, QUE ME CHILLA CUANDO RELLENO CARTUCHO ORIGINAL Y NO ME PERMITE RELLENARLO..... YA QUE SUPONGO QUE ME "CANTARÁ" CUANDO LE PONGA EL CONTÍNUO.....( A LA HORA DE RELLENAR HE QUITADO INTERNET PARA QUE NO CONECTE CON "HP", PERO IGUAL ME SALE UNA ADVERTENCIA DE PONER CARTUCHO NUEVO , A PESAR DE QUE HE RELLENADO EL ORIGINAL).......... PLEASE ... PLEASE....!!!!
Wow!, I wish there are shops here in my country that would be willing to convert hp 2130, they all said its impossible yet I'm here watching someone do it.
I simply cannot believe it is this easy. Thank you for making it seem so doable, I am definitely going to tackle this project! Thank you SO much for posting!
Super
Very good Craftmanship. Love it. 👍👍👍
La mejor explicacion y sin hablar. Hoy instalo mi sistema
Этот тип знает толк в извращениях)))
Santo. Refil House, nunca vi uma exposição e explicação pacienciosamente pela forma do início ao fim. Como também uma pessoa instalando um bulk passa a passo, e com serviço sendo limpo a cada resido de tinta que ficava. Outro por menor, com um fundo de música a um bom nível, sem falatórios repetitivos e escandalosos. Parabéns.
man this was posted on my birthday.......Its was so satisfying to watch....Gr8 work
From where these materials çan be procured in India, please update the number and address
can you make another video how CISS work.
how travel ink from tank to cartridge while printing.
thank you
This man is an artist.
It's a pleasure to see how he works !
1) Is this video applicable for HP 2675 ?.
2) Is there an order in the tubes for specific colors. Which tube goes into which color?
3) The hole on the printer wall is made on the left side. Is that on purpose?
Eres un genio, con ese hilo se resuelve el derrame excesivo y no tengo que destapar los cartuchos de tinta y poner mas esponja. Gracias
Bravissimo! Sei un genio! Bastano le sole immagini. Grazie
This looks like a fun conversion.
Excelente. Você é muito cuidadoso, a forma como você detalha cada passo. Parabéns.
perfect done thanks for explaining I want to ask what is the size of the silicon rubber ink blocker and the drill screw size ?
Parabéns pelo capricho na instalação do bulk ink.
Thanks
Estas maquinas el inyector va en el cartucho ¿que haras cuando se deterioren los inyectores?
Many thanks . A lot of helpful stuffs I have gotten from this
Good idea and used you technical work , I like it
The ink tank needs to be at what level to the printer,how many inches does the printer need raised,I was thinking the tanks needed to be level above cartridges but I keep seeing below cartridges?....IMPORTANT TO ADD OR IT WONT WORK PROPERLY
This really shows how much we're taking it in the ass by the buying those expensive cartridges...i have not used inkjet since the late 90's though...it always dries up on me and i have to toss the printer....no such problem with todays affordable lasers...
Good video & great information. But HP 2677 , 680 black & 680 colour cartridge can be refilled only twice after that having printing more than 300 pages, cartridge stops working even if it has ink left. Unable to reset ink level for HP All in one 2677 printer ( firmware cartridge locked). So CISS system is not possible..
Parabéns pelo video, muito bem feito o serviço,impecavel.
Спасибо! Получилось идеально для HP 3635!!! Картридж 652!!! Нижний уровень чернил находится на 20 см ниже уровня картриджей! Только так работает! Иначе - перелив!
In bottle top end, have a Specially designed - Tiny air-pressure balance device between an ink cartridge and an ink bottle,
you can download www.refillhouse.com//Download/Tiny_air-pressure_balance_device_US007364281.pdf
Ink in the ink bottle, from the highest ink level to the lowest ink level, can maintain a balance, not leakage of ink.
or link to
www.refillhouse.com/index.php?route=product/product&path=18_45&product_id=211
On the left upper corner of your window, you can change language to English and currency.
On the English website, You can also translate English into any language by the google translate option.
20 cm to height, about from 4 cm to 10 cm
Why filling with rope inside black cartridge? What's the advantage of it? It doesn't make sense and looks scary.
I have following doubts, if you can help me with:
Q.1) Placement of Ink Tank:-- Should the ink tank be place at the level of the printer, above it or below the level of the printer. I suppose below is a definitely no here as the ink flow in cartridge will not be possible if the ink tank is below the surface level of the printer. "So should the ink tank be above the printer or at the same level on which printer is placed???????"
Q.2)Print quality of the aftermarket refill ink:-- Print quality of most of the aftermarket inks that are filled in the CISS system are very faded and dull. Please suggest the best quality aftermarket refill ink(If its only sold in your area, will you be able to ship some stock for me). If not, Can I use original refills bottles of other companies like canon, or original HP refill inks like HP GT51 and GT52
Q.3)Rubber plugs on Ink Tank :-- There are four rubber or plastic plugs for four ink containers. Please confirm if they are supposed to be closed or open during the printing operation?
Q.4) Printing frequency:-- Is it really mandatory to print at least one b&w and color page daily so that the ink in cartridge do not dry and clog the cartridges
Than you
Q1A: The use of different regions, CISS system differences, how many centimeters printer to raise?
I can not give you the correct answer
The only way is to,
1. The first high pad printer height of 5 cm, it is recommended to use a slice of each centimeter plate, or magazine
2. Print a 8k/Photo image (google search 8k photo), printing solution using the best resolution, paper selection photo paper
3. Print on plain paper,
4. Carefully observe the printer height of 5 cm high pad printing results, if there is ink, it is necessary to reduce the height of the printer into 4 cm, 1 cm and 1 cm individual observation, you will be the answer.
Q2A: You can choose a compatible fill ink, or the original HP GT51 and GT52.
Q3A: You should refer to the balance system on the ink bottle on the above Video, is our design and use a long time(more than 12 years), you can download the technical description
U.S. Patent - US007364281
Title: Tiny air-pressure balance device between an ink cartridge and an ink bottle
www.refillhouse.com/Download/Tiny_air-pressure_balance_device_US007364281.pdf
Q4A: good ink and balance system is no problem, do not need so hard; as long as the power not to be removed, two weeks can be printed one.
other information please ref.
www.refillhouse.com/index.php?route=product/product&path=18_45&product_id=215
ruclips.net/video/g126wa1A-3c/видео.html
Hi! I have the same question as #1. Have you managed to figure it out? This is working on the Marriotte Bottle principle and am just worried that if the ink tanks are lower than the cartidges, ink will just flow back(?!). The guy’s reply to your question is not reallt clear. Based on your experience, how did you do it? Thanks.
la excelencia y la creatividad en su maxima expresion.
You make my (working)Day...Thank yout so much...now i go to work again :-) Best regards from Germany
how about the counter.if the cartige is empty machine does not work anymore,so new cartige is needed ,also the counter once it reaches120 or so printed pagesi machine is alted till new cartige is installed.
Disculpa será que se puede instalar ese sistema de tinta continua en hp deskjet 2775, si se puede me podrías mandar el link donde o conquien adquirir ese producto... gracias
sleepy finally after days... thank you for this wonderful video
Para qué es la piola le coloca en el agujero del cartucho negro?es solo al negro o a los demás del cartucho a color también hay q ponerle?
hello. you can find out the size of the part that you are gluing. We need 1 minute 26 seconds.
I want this for my HP DeskJet 2600 (802 & 803 cartridge). Please provide me the link.
years ago use this tecnology, was a pain in the head, but well thank good machines have it inside already
Thank you for your efforts and God bless you. I am in Togo, could I find this CISS kit here? If possible I want to order for the HP deskjet 2700. Please what is the price? Thank you and I look forward to your response
j'ai la meme imprimante et je compte faire cette installation merci pour la vidéo, c'est bien expliqué
PappsSspps”W o
Thanks for the video. Does not give problems with the ink level? How do I reset the ink level? Thank you
This is the best solution to the out running of ink ever, Are all those stuffs required available in Africa, Zambia!?
Why do we had to inset the cotton thread and which solution was it when it was initially soked?
the cotton is inserted to use capillary system, so the ink can be absorbed by the cotton when needed from the bottles... And the solution he was using in the beginning is alcohol I guess ! not sure but it might be this, to clean the material...
5:55 why do you put strings? why are they needed?
For a long time (I had a C4280 for 14 years) HP printers were already excellent, but today I suffer on the skin with a multifunctional external ink tank (GT 5822) that with little use and 16 months of use failed to recognize the black head, and I can't buy a new head (I got it after a long time but it still didn't work) or technical assistance. According to HP technical guidance I will have to send to São Paulo because in Rio de Janeiro there is no technical assistance. I will still have to pay for shipping and return without counting the amount of the repair (becoming unfeasible). The printer is now 1 year and 9 months old and is now only for paper weight. Consumer advice, do not buy HP brand as you will be adrift with the equipment.
Por muito tempo (tive uma C4280 durante 14 anos) as impressoras HP já foram excelentes, mas hoje sofro na pele com uma multifuncional tanque externo de tinta (GT 5822) que com pouca utilização e 16 meses de uso deixou de reconhecer o cabeçote preto, e não consigo comprar um cabeçote novo (consegui depois de muito tempo mas continuou sem funcionar) e nem assistência técnica. Segundo orientação técnica HP terei que enviar para São Paulo pois no Rio de Janeiro não tem assistência técnica. Terei ainda que pagar o envio e o retorno sem contar com o valor do conserto (ficando inviável). A impressora está agora com 1 ano e 9 meses de uso e agora só serve para peso de papel. Conselho de consumidor, não compre marca HP pois ficará a deriva com o equipamento.
Please contact HP support
support.hp.com/emea_africa-en/document/c04930683/
ruclips.net/video/zCsiRaB2J9I/видео.html
Nice work, but where I can buy this kit !
Thank you for this video! Making things easy for not-so-tech-savvy like me. :)
I wonder if this can work with a HP Officejet 5222 with the right modifications?
Можно уснуть, и музыка способствует этому. Включаем скорость воспроизведения Х2.
Три раза смотрела , только на 4 раз получилось! Не заснула, с чашкой кофе в руке. Но зато всё дохотчевоо.
О, русские люди!!! подскажите где эти все расходники(хотя бы шлагочки) купить?
@@МарсельБиктимиров-т3э на вайлдбериз введи СНПЧ
@@emmap.g.i.7603
Thanks for insulation method.
I salute you.
This is great But where to get the tubes ?
Sir you can copy the hp GT series ink tube position .hp GT series prienters & hp 3635 design are same .
In this process Prienter create unwanted nosie which happened with my HP deskjet 3835 .I watched your video & when I was installing the system I mount the inkTube below scanner . It's create some unwanted noise when Prienting then I copy the hp GT series ink tube position ,after doing that the inktube didn't touch Prienter inside parts & no extra noise.you have to do only one more rectangular hole on the middle top plastic of ink cartridges access door and a insert T shaped attachment below scanner
Thanks for your advice.
In addition to the content of our sales tools, we have added tools that will allow buyers to use them more;
For the problem of extra noise, you can use the foam to stick it under the scanning board, and any problems that occur can be easily eliminated.
Sorry I fell asleep during the string part...what happened?
Hello! Can you make a video on how to install CISS on the HP Officejet 100 Mobile printer?
The ink cartridge can be filled; the space is too small to be modified for continuous ink supply.
Can I see/save the scanned photo in mobile phone while hp 2331 is connected with phone through USB cable?
hi i have a HP Deskjet 3510 series which uses ink 61. how do i do this and where can i buy supplies for this project ?
What's the printing cost per page before n after installation
Can you have the outside ink on the right side of the printer.? I'm right handed.
ого. класс. я из кбинета такой шлейф в спальню проведу... в стену можно заштробится и замазать. чтоб заправлять можно было перед работой. не вставая. а то мороки столько со шприцем этим
thanks for helping us my friend , in my case you helped to me , you are a patient man for teaching but thanks a lot , Congratulations it's a great video
Thank you for your recommendation, I hope it can helps you.
请通过此地址的电子邮件给我发送消息glennelekogo22@gmail.com
Hello,Is there an application video for the HP DeskJet 2630 printer?How many meters of rope do you use for the black cartridge?
Thanks.
about 5M
Thanks.Are you wetting the thread with water? @@refillhouse
How do I get the driver for theHP551 Smart Tank Wireless All in one on my MACOS system?
How many pages can you print and replace the cartridge after a transformation like this?
Can this be done with an HP OfficeJet 4630 All-In-One or an HP OfficeJet 3830 All-In-One?
Video is clear atleast doesnot matter you are explainin or not...
gracias ,me as solucionado el problema ,estava a punto de tirarla
If the cartridge become empty is there any error that you cannot print?
Yes but what about ink level on printer. Is that set for infinity printing?
What happends when the cartrige says its done the 800max prints? How do we bypass that? And aslo the region block?!
In my HP 2623 I did this and after printing few pages, it stopped recoginising the cartridge. I am unable to reset it. I bought new black cartridge and its printing black fine. But color cartridge not working. I ended up wasting money and no color print now. Tell me if its possible to reset in HP 2623. I have followed many videos on youtube for this but nothing worked so far.
Чего то я не понял, зачем в цветном картридже надо было сверлить отверстие, чтобы потом его заткнуть заглушкой? Второй момент, на хрена протаскивать весь шлейф слева направо если можно справа налево вытащить малую часть! Следующий вопрос, зачем использовать шлейф на 8 если нужно на 4, и соседняя прорезь в кронштейне как раз для четырех, только надо было его перевернуть соответственно. Почему в цветном картридже одна трубка с уплотнителем, а остальные 2 без? Для чего нужно было трубки обрезать под углом?
The color ink cartridge is drilled with one hole, video time 36:24. When the ink cartridge is maintained, the ink is injected into the ink cartridge to discharge the air.
The tube is a thin tube, and the inks have 8 colors, which is used until now;
Use 4 rows of tubes, retain 8 rows, is to provide a smoother tube swing.
Really i like it very neat nice work but sir this martials were is available if u have pls let me know thx.
Hello, thanks for your good explanation. I want to buy these items. Please help me, where or from which address can I buy them? Thanks
For large number printing, please refer to
ruclips.net/video/DmQ9FDPAZ3Y/видео.html
Habilidade e delicadeza. Não é para qualquer um.
Good..This printer still work today???
What is benifit after of Ciss tank install in HP2135 printer and all of Cartrage types of printer?
Hi Boss,
How are you ?
I want to wire a Canon PIXMA MG2550 for the external anchors with pipes like what you did with the HP Deskjet 2130, 2135, 3630, 3635, 4720 CISS - HP 63, 302, 123, 803; HP 664, 680, 652; HP 46
Please, is it possible with your method really?
I am waiting for your answer tonight or tomorrow to do this on Monday morning. Thank you very much for your simplicity.
I leave you my mailbox.
Very cordial,
Muy bueno el tutorial, pero me quede dormida esperando, gracias, Viviana
Lo felicito, muy buen tutorial. Hay cosas como: 1) La música, que pudo colocar algo mejor. 2) El hilo, debió explicar aunque sea por caracteres, para que es. 3) Las manguera, porque tan ancha, si solo utilizara cuatro colores.
Sos una idiota.
esa maquina no tiene bomba para succionar osea no llega tina de los tanques a los cartuchos y si dices que es por gravedad no se puede o empieza a gotear el cartucho segundo a las 150 impresiones se quema el chip del cartucho 3 el vídeo esta bien hecho pero la maquina no va a funcionar he dicho caso cerrado
Hola CARLOS ANDRES PARRA LOPEZ, la impresora no tiene bomba de succion pero, los inyectores al aplicar la tinta ejercen un trabajo de succión y jalan la tinta de los tanques de tinta hacia los cartuchos. Los cartuchos deben quedar alineados con la impresora como se muestra en el video. Los cartuchos y las mangueras deben quedar sellados, porque si jalan aire la tinta no sube. yo me oriente con el video y puse a funcionar mi impresora con sistema continuo. Funciona de maravilla, porque los cartuchos solo te rinden como para unas 50 a 100 páginas y te toca recargar el cartucho o comprar uno nuevo. Con este sistema puedes imprimir la cantidad de hojas que tu quieras. Debes tener en cuenta que estas impresoras son caseras por lo que debes dejarlas reposar unos minutos despues de haber impreso unas 100 a 150 páginas. Mi esposa está feliz porque ahorramos mucho dinero en tinta y cartuchos porque las recargas aquí en colombia son un hueco sin fondo. Debes tener en cuenta también que Hewlett packard hace cartuchos bastante comerciales por lo que despues de unas 2000 a 3000 impresiones de los cartuchos estos pueden deteriorarse pero aún así se ahorra mucho dinero.
@@existencialista6840 hola cuantas impresionrs vas hasta ahora con el cartucho 664
What was that thread put in the black cartridge, at the start? For what?
Hi, this kit can be apply at hp envy 5540? And how much cost It? Thanks
i was watching the video and suddenly I was sleeping :-) Great video Bro...
🤣🤣🤣🤣
Do I need to put a thread in the cartridge if it is new ? why put a thread there at all ?
What’s the importance of putting the sticker back?
How to fix ciss tank Hp 6475 advance plus all in one printer ??
Lots of work better buy tank printer but anyways good work and can you tell me that all the accessories used comes along with kit or we have to buy separately?
We are providing simple, correct technology that you can easily install it, we consider the factors that are not installed for hours, or days of printing, what is more important is the problem of the natural fall of the pipe.
You can follow your living area, get similar materials, and then adjust the height of the printer, you can do it well.
You can also buy parts as we buy parts, buy local ink.
Meu amigo vc é fora de série.
Whats the size of the torx screwdriver you used when opening the printer as seen at the start of the video?
Hi!would it be possible for 2130 printer?hopefully you could help😊thanks!
can you tell me whats material used from that printer replacement
Can this also work on HP deskjet 2640? looks like the same ink cartridge
I don't think fix cleaning bright pint colour problem I can't fix what to do your HP.
Why put the thread inside the black ink Please explain
Thanks for the tutorial but from where can I buy this pack?
From the RefillHouse, look the right down side.
Bonjour a tous
Comment on installe l'un priment hp deskjet 2130 sur un portable merci
any where
from where can i buy Special thing to use in this process
¿muy bueno, pero donde compro todos estos productos aca en chile?
Sir kya hp Ka 1510 ciss kit lage ga plz ans me
Esa impresora esta funcionando todavia? Seria interesante ver los equipos despues de un tiempo de uso a ver si vale la pena instalar el CISS
Funcionan rebien por años, y ponerle esos hilos resuelve derrame excesivo, el tipo es un genio, usare su idea.
HOW MANY PAPER CAN I PRINT WITH ON SET OF CARTRIDIGE WITH THIS SYSTEM
Please upload video on how to install CISS system in HP 3835 printer!! waiting for the same for over a month when u said it will be uploaded soon. kindly help us with the same!
R K MAURYA as soon as possible, later some days
Refill House-填充小站-噴墨印表機-墨水-連供-改機-連續供墨-解碼-修復-填充專家 thanks! I took 3835 printer that day by asking CISS on that, now my ink cartridge are coming to over. that's why looking forward for CISS as soon as possible.
Video data is too large, it takes a long time, It will be completed on schedule
ruclips.net/video/g126wa1A-3c/видео.html
Hola que tal +Refill House quisiera que me mandaras un listado de los materiales que utilizaste en tu vídeo creo que me servirá mucho por favor
Please link, list in Content
www.refillhouse.com/index.php?route=product/product&path=18_45&product_id=211
CUAL ES Y COMO ELIMINO EL ARCHIVO , DEL PROGRAMA DE LA IMPRESORA, QUE ME CHILLA CUANDO RELLENO CARTUCHO ORIGINAL Y NO ME PERMITE RELLENARLO..... YA QUE SUPONGO QUE ME "CANTARÁ" CUANDO LE PONGA EL CONTÍNUO.....( A LA HORA DE RELLENAR HE QUITADO INTERNET PARA QUE NO CONECTE CON "HP", PERO IGUAL ME SALE UNA ADVERTENCIA DE PONER CARTUCHO NUEVO , A PESAR DE QUE HE RELLENADO EL ORIGINAL).......... PLEASE ... PLEASE....!!!!
How can i get help; the printer is displaying an error message; No print cartridge
Que material metiste en los cartuchos! ?
Wow!, I wish there are shops here in my country that would be willing to convert hp 2130, they all said its impossible yet I'm here watching someone do it.
If there is a will..... thee is a way!
can you upload for 2620?