#1 Method of Refill HP Cartridge 60 61 62 63 64 65 66 67 68 21 59...

Поделиться
HTML-код
  • Опубликовано: 23 янв 2025

Комментарии • 187

  • @mowwow1998
    @mowwow1998 Месяц назад

    best detailed video on refilling hp cartridges ive seen, especially with the really good tips on priming with vacuum cleaner and using warm water to revive dried out cartridges.

  • @lynn8524
    @lynn8524 2 года назад +3

    I followed his clear instructions and refilled my very old, empty, color ink cartridge. Soaked it in a small amount of very warm water first, filled the ink, covered the holes, used my vacuum hose, and it worked perfectly. Thank you!

  • @oolum
    @oolum 3 года назад +5

    Thank you! You are the McGiver of Ink Refillers! You may not recognize the reference. McGiver was a very resourceful guy who could make anything work using only the items around him at the time.

  • @texast7062
    @texast7062 5 лет назад +7

    Thanks Kevin! Very easy to understand and I was able to clean both cartridges and get the ink flowing after a long time being unused. With a little bit of patience, it worked just as you explained. The vacuum technique is fantastic!

  • @JoseDelgado-ho1cf
    @JoseDelgado-ho1cf 4 года назад +7

    It takes me about 30 cleaning prints to get everything right- but it works! Cool.

  • @pengxu1914
    @pengxu1914 4 года назад +3

    vaccum with paper towl worked perfectly! Thanks!

  • @watercraze2000
    @watercraze2000 5 лет назад +1

    Because of you I am going to try this. I had so many say it is too hard to mess with. U do make it look easy. But I am going to try. I got my order in today and did get it through BCH as u mentioned. And got the cleaner as well. Thanks for your help. Hope I have just as good luck with it.

  • @lalitafaroli
    @lalitafaroli 4 года назад +2

    This is the best video I have seen on refilling cartridges.
    Thanks.

  • @tigerlilly6895
    @tigerlilly6895 3 года назад +5

    Depending on your printer, if your printer is not reading the cartridge or says it's corrupted but you just refilled it you can do this but at your own risk: When refilling the cartridge take off the top paper completely, you'll see a circular indentation to the right of the refill hole. After refilling use a tip of pen cap or something strong and press that circular depression 10 to 15 seconds, but do not puncture it... That resets the cartridge and usually you can use again with great success...

  • @mvtservice5473
    @mvtservice5473 4 года назад +2

    You were a research assistant! Only fresh cartridges can be refilled!

  • @richardjensen4874
    @richardjensen4874 5 лет назад +5

    Thanks for the suggestions on unclogging and refilling. Very informative.

  • @Mountaincarole
    @Mountaincarole 3 года назад +4

    Thank you Kevin! Awesome tutorials. You are making a big difference for the environment too!!

  • @wendydee3088
    @wendydee3088 5 лет назад +11

    Thank you so much! I bought the refills and the ink would NOT come out. After using your vacuum method one is working great. The other I over filled so I'm trying the soaking method to see if the excess will drain. Seems to be working at the moment, cup is pretty black lol.

  • @MS88nyc
    @MS88nyc 2 года назад

    Thank you. Because you spent the time to make this video, I ordered your products via Amazon. Got the kit and the combo with the 3 blacks with the 3 colors. Great prices, informative video, nice guy, thank you!

  • @briannoecker7149
    @briannoecker7149 5 лет назад +4

    Great video! Articulated very well. Thank you.

  • @InvokedAlbaz
    @InvokedAlbaz 6 месяцев назад +1

    How do I get the printer to reset the ink level of the refilled cartridge? It still says it's got 1 square left.

    • @jodyann77
      @jodyann77 5 месяцев назад +2

      Here's how you can try resetting the ink levels on an HP printer:
      Remove and reinstall cartridges
      Take out both cartridges, turn the printer off and on again 20 seconds later, and repeat at least five times. Then, put the cartridges back in and print a test page.
      Reset the printer
      For inkjet printers only, remove the cartridges, unplug the printer while it's on, wait a minute, plug it back in, and turn it on. Then, reinstall the cartridges

    • @jodyann77
      @jodyann77 5 месяцев назад +1

      Let me know please if that worked for you I remember I had the same problem before with lots of different printers as I never bought the real kind of ink like they want you to, but I always figured it out so let me know if that worked or not.

    • @InvokedAlbaz
      @InvokedAlbaz 5 месяцев назад

      @@jodyann77 all this never works. waste of time. they also tried to trick you by trying to waste your ink in another video.

    • @jodyann77
      @jodyann77 5 месяцев назад +1

      Also, the second option works for me almost always! Where it says for inkjet printers only, try that one there first!

    • @jodyann77
      @jodyann77 5 месяцев назад +1

      Here's another one you can also try that's always worked for me in case those don't..
      How to Resolving Cartridge Recognition Errors
      When faced with cartridge errors, one of the simplest yet effective methods is to remove and reinsert the ink cartridge. This process can reset the printer's internal memory and resolve recognition issues. Follow these steps:
      Power off the printer and unplug it from the wall outlet.
      Open the cartridge access door and carefully remove all ink cartridges.
      Press and hold the power button for about 30 seconds to perform a hard reset.
      Reinstall the ink cartridges, ensuring they are securely and correctly placed.
      Plug the printer back in and turn it on.

  • @emmavimond3612
    @emmavimond3612 4 года назад +1

    You are awesome! I saved so much money thanks to you !

  • @qbertatx
    @qbertatx 3 года назад

    Ordered my kit. Going to give this a try
    Thanks!

  • @Orlanzepol123
    @Orlanzepol123 4 года назад +1

    Very helpful video. Thanks

  • @higherselfbao8876
    @higherselfbao8876 2 года назад

    Kevin 求助。我自己refill 了HP ENVY 4501 黑色的墨合二次,第三次refill 开机后,打印不了了,频幕显示”The following ink cartridge(s) must be replaced ",然后屏幕下面一直显示运行搜索的小符号死在那里了。请问我该怎么办?电脑里打印软件里说是黑色墨合失败。非常感谢你的频道。墨合 太贵了,实在买不起了。

  • @renzo9553
    @renzo9553 10 месяцев назад

    anyway can I refill pigment ink instead of dye ink even if I total flush them all filter,nozzle and sponges?

  • @sureshnallu3897
    @sureshnallu3897 4 года назад +1

    Can we refill the cartridges which came with printer.
    When I asked to refill centers they told me that cartridges which came with printer will only fill 20% and they asked me to buy new one and next time onwards we can use for refill which will have full capacity.
    Thanks

    • @BCHTechnologies
      @BCHTechnologies  4 года назад +2

      Haha, that’s bunch of bulls. Yes, you can refill the starter cartridge.

    • @sureshnallu3897
      @sureshnallu3897 4 года назад

      Kevin's Ink & More Thank you

  • @SoliAndAndre
    @SoliAndAndre 3 года назад +2

    If you want to create several backup sets of cartridges, how do you suggest they be stored? Thanks!

  • @here_we_are1427
    @here_we_are1427 3 года назад

    Hi Kevin
    I have refilled hp-65 using same approach for my printer deskjet 2620, but it is still showing ink low and not allowing me to print 😔

    • @BCHTechnologies
      @BCHTechnologies  3 года назад

      Yes, it's going to do that. I think I covered it in this video.

  • @lukedenault9776
    @lukedenault9776 3 года назад

    Will the printer stop me from printing at some point because it is saying it is out of ink?

  • @Ahmedpakido
    @Ahmedpakido 3 года назад

    I did the same thing but ink was coming out from the front of the cartige

  • @luisgrippa742
    @luisgrippa742 Год назад

    Hola lo hice tal cual nada mas que la tinta a color cuando voy a imprimir solo imprimi en amarillo alguna ayuda?

  • @Gary_G
    @Gary_G Год назад

    Cannot get HP63 to print. Ink comes out of bottom of cartridge with tissue.

  • @wylamchenry470
    @wylamchenry470 4 года назад +2

    Can you fill the cartridges with tattoo stencil ink and print ready to go stencils. Make a video and show me if this can be done

  • @laurieshepherd6941
    @laurieshepherd6941 Год назад

    I purchased ink to refill my 67 xl cartridge can I use that same ink to refill my dad's 63 cartridges?

  • @jvjivi6047
    @jvjivi6047 5 лет назад +1

    hi ! itried this on my hp deskjet3630 cartridge 63 but it says that the ink is still low and it print only 1 ..what can I do about it ? please help

  • @aros007z
    @aros007z 5 лет назад +1

    Great video, I will be ordering your kit, thank you!

  • @lfuentes4098
    @lfuentes4098 Год назад

    Im confused as to why you hold it sideways.

  • @Akearsing0603
    @Akearsing0603 4 года назад

    So we can't just pierce the sponge hole for black? We have to drill a hole in center?

  • @KryaDiere
    @KryaDiere 6 лет назад +1

    Very helpful thank you! My cyan ran out today and I immediately refilled all 3 colors but my printer will still not print cyan (magenta and yellow come out perfect on the test page). Is it because I need to vacuum it (I don't have the clip)?

    • @BCHTechnologies
      @BCHTechnologies  6 лет назад +1

      Yes. Leave the cartridge in the printer for 2 hours. If it still doesn't print cyan, vacuum it.

    • @KryaDiere
      @KryaDiere 6 лет назад +1

      Ok thank you!

  • @doccpu7
    @doccpu7 4 года назад +17

    Several hp inkjets remember the last 3 or more cartridges and keep complaining that the cartridge is empty by its estimation process. Keep 4 or more cartridges around and install 3 or more old ones till you add the "NEW" one. it will see the last couple and think it hasnt seen the "NEW" one before.

    • @georgeannbyrd1681
      @georgeannbyrd1681 Год назад

      I just keep all my empty cartridges just for the purpose of only needing to do one mass refill job that will last me a few months.

  • @hossammostafa128
    @hossammostafa128 5 лет назад +1

    I refilled hp 123 Tri Color cartridge in hp deskjet 2620 but the ink level indicates that it is empty and the printer does not print anything , when i give it a printing job , it blocks it.
    I searched on internet and i discoverd that hp blocked refilling old cartridge ,so i need a way to reset ink level or make the printer read the old one as a new one.
    could you please help me ?

    • @Joinyujoe
      @Joinyujoe 4 года назад

      Hossam M. Mustafa I end up same thing like you and I buy new printerT^T

  • @stephanieayarza5190
    @stephanieayarza5190 3 года назад

    Hello Kevin.. I need help.. I saw your video on how to refill them, and I thought it was pretty easy so I bought the ink you recommended and when I tried to put it back inside of my Hp Envy Photo 7858 it reads it as counterfeit or used and doesn’t print out any color...I don’t wanna spend so much money every time buying new ink.. what should I do ?

  • @emeraldgreen3280
    @emeraldgreen3280 3 года назад

    HELP! I have refilled mine twice within the space of 2 weeks to overflowing. I have cleaned and blotted the excess from the top and bottom of the cartridges, but it's not printing the correct colours and I've even had to re-fill my black after printing 30 pages and it's now not working at all!

    • @BCHTechnologies
      @BCHTechnologies  3 года назад +1

      See this video, it has better troubleshooting section: ruclips.net/video/s19ypQ0r2Dk/видео.html

  • @salehsadeghi566
    @salehsadeghi566 4 года назад

    hi I have problem with damn 21-22 cartridges ---is there any bypass on chip or board of F2180 for bad cartridges error?? printer works with new cartridges but after 150 pages cartridge led blinks always....................so PLZ a bypass for badcartrige error

  • @katharinegere5676
    @katharinegere5676 3 года назад

    Great video, thank you!

  • @lady33357
    @lady33357 3 года назад

    please help mine says at least one of the cartridge's has a prblem.hp envy 4520

  • @iiparachuteregiment8800
    @iiparachuteregiment8800 9 месяцев назад

    How can you bypass Instant Ink message???

  • @Richard-se3ju
    @Richard-se3ju 3 года назад

    Where can I buy that transparent "case" that is on the top of the cartridge?

  • @NaughtiusMaximu5
    @NaughtiusMaximu5 Год назад

    so i just switched to a linux pc, and it didn't tell me low or no ink, it just tried to print

  • @mariastamates4003
    @mariastamates4003 4 года назад +1

    Absolutely, Great Video! Have a question. I have HP 62 Instant Ink Cartridges and planning to cancel my subscription. How can I bypass the Instant Ink cartridge reader/scanner so it will work like a standard HP 62 Ink Cartridge?

  • @irisshadi474
    @irisshadi474 6 лет назад +4

    very helpfull thank you sooooooo much... i was clogged

  • @calliewilliams9221
    @calliewilliams9221 4 года назад +3

    Can I fill my ink cartridges with sublimation ink? If so, can I suck old ink out with the vacuum method!

    • @jainlau
      @jainlau 3 года назад

      Hi, have you done that before? I m just curious... as i wish to use my HP deskjet to do some sublimation project too..

  • @T_Burd_75
    @T_Burd_75 4 года назад

    I purchased the kit from ebay recently to refill my HP 64 color and black cartridges. While refilling the black cartridge had perfect results, refilling the color cartridge didn't go as well. While the cyan and magenta prints okay, I cannot get the yellow to print at all, regardless of what methods and tricks I tried. I tried them all. If I set the cartridge on a moistened paper towel, the yellow comes out just fine. But it just won't print. At first, the magenta didn't want to print at all, either. It was intermittent. But I'm not surprised. Since the days of Lexmark printers, I've never had luck refilling color cartridges, only the black cartridges. My last three printers would not print yellow after refilling. It only seems to be the yellow. What gives?

    • @BCHTechnologies
      @BCHTechnologies  4 года назад +2

      It doesn’t sounds like clogging. It’s more like ink pressure imbalance. Use the priming clip to draw more ink out and thus remove extra pressure. Leave the cartridge in the printer for a day, then print 5 to 10 pages. Don’t print full color page, just regular documents with color figures. It usually takes care of the problem.

  • @thepeopleschoice5892
    @thepeopleschoice5892 6 лет назад +3

    hey one question can I try ciss tank for my Canon mg 2500 series.
    can u make a practical elaboration on it Pls.. I have frustrated refilling and buying too costly

  • @brotherblog5291
    @brotherblog5291 4 года назад

    Can I Used any ink for refilling the cartridge

  • @studentsos7438
    @studentsos7438 6 лет назад +1

    Hi Kevin, i have tried it with my printer envy 7155 but it does not work out. The ink is still low and it does not allow me to print at all. What should i do now?

    • @BCHTechnologies
      @BCHTechnologies  6 лет назад +1

      When you say "does not allow me to print", is the printer working but the print out is blank?

    • @urbasantiago
      @urbasantiago 4 года назад

      Dear Katherine, I have the same printer and is thinking of buying this kit. Have you ever managed to make it work with your printer? Thank you.

  • @damianomartucci9814
    @damianomartucci9814 2 года назад

    And what do you think about using nitro thinner for unclogging cartridges? Does it harm plastics?

  • @michaelcohen7011
    @michaelcohen7011 4 года назад +1

    This video title suggests that the EZ30-T will work for a 67 cartridge but the website only lists the 60 61 62 63 64 65 as the cartridges it can service. Will the EZ30-T work with a 67xl cartridge? If not, what's the kit for a 67xl?

  • @wadeputtbrese4049
    @wadeputtbrese4049 5 лет назад

    My ink cartrige leaks after trying this. and I am getting huge ink blobs. do I need to make sure this is Air tight, I could not understand and forgive me, but did you say, It does need to be air tight or it does not? Thank you

    • @BCHTechnologies
      @BCHTechnologies  5 лет назад

      No. No need. You overfilled. Check out my newest video showing this.

  • @snowy3157
    @snowy3157 4 года назад

    Can you teach us how to use/install a CISS on HP Deskjet 4535?

  • @eltordillo2826
    @eltordillo2826 4 года назад +2

    Thank you for your good explanation! You just got a like and a sub!

  • @xastheworldfallsx
    @xastheworldfallsx 4 года назад +3

    I would really love to get this kit but I looked on your site and couldn't find one for the HP 67 ink. Is there a kit for that? Or would this work for that as well?

    • @cassielavallee389
      @cassielavallee389 4 года назад +1

      I used the one mentioned in the video and it worked for me.

  • @HJKelley47
    @HJKelley47 6 лет назад +1

    An Amazon customer informed me that bulk ink refill kits do not work on the HP Officejet 6310-All-in-One printer. Does the BCH Technologies refill kits work with my particular HP printer?

    • @BCHTechnologies
      @BCHTechnologies  6 лет назад +2

      The bulk ink works fine if you know how to use it.

  • @williamprice3929
    @williamprice3929 Год назад +1

    Didn't you just contaminate the other colors when you squeezed the color ink all over the cartridge?

  • @muaythai4lifelife
    @muaythai4lifelife 3 года назад

    Hi there! I have a question, maybe a stupid one. Is it technically possible to refill a cartridge, like a hp 305 for instance, directly from the printer, without taking it off? Or its risky because of the pressure with the siringe that might cause a leaking from the print head? Maybe it would be hard only to take off the plastic cover for the siringe.. apart from that I think it would be possible. Thanx!

  • @brianhickey3196
    @brianhickey3196 3 года назад

    Thanks Kevin. Your video was very informative and awesome. Talking about pain points and things to be aware of. I like your sassy dry comments too (e.g. toothpick for dental hygiene). :-) Where did you get your little steamer? That looks fantastic!

  • @daniellevosburgh1530
    @daniellevosburgh1530 3 года назад

    How do you get the printer to say ink levels full?

  • @renzo9553
    @renzo9553 10 месяцев назад

    I do this and it saves lot of $

  • @TexasCowboy6
    @TexasCowboy6 4 года назад

    How many ml does an HP black 64 XL take? How about an HP color 64XL?

  • @yeabilo1989
    @yeabilo1989 5 лет назад

    I refilled my HP 62 Black Cartridge for HP Envy 5660. HP Envy wont allow to reset ink level. HP Envy 5660 is a touch screen printer. Dont know if there anyway to reset ink level.
    anyone has idea how to reset ink level for Envy 5660?

  • @shanetrain9791
    @shanetrain9791 5 лет назад +3

    You are so awesome not making me go buy more

  • @Robbyfrags90
    @Robbyfrags90 4 года назад

    I need a priming clip for hp67 and I can't find one anywhere

  • @betsys6976
    @betsys6976 4 года назад

    How much ml do we put in for each color

  • @braidzbyleynah
    @braidzbyleynah 5 лет назад

    Ok, so even though you used the 60 cartridge I can use the same exact method with the 63? I have a hp officejet 3830. When I print I still get a little black but no colors. I'm fairly certain there aren't any blockages so once refilled it should print fine correct? Thank you.

    • @BCHTechnologies
      @BCHTechnologies  5 лет назад

      Yes, same for all integrated cartridges.

    • @BCHTechnologies
      @BCHTechnologies  5 лет назад

      There is a new video that I showed how to refill 63 and how to troubleshoot. You can see my video upload and find it.

    • @braidzbyleynah
      @braidzbyleynah 5 лет назад

      @@BCHTechnologies Thank very much for replying. I will check it out. I put my order in yesterday, looking forward to it. Have a blessed weekend.

  • @imanawaseem1747
    @imanawaseem1747 2 года назад

    Thank you for the informative videos. I just probably save 150$

  • @layzaannepascual9865
    @layzaannepascual9865 4 года назад

    Hi Kevin! I'm planning to refill my HP 64 cartridge is there anyway i can know if the cartridge is already refill? Do i really need to do it 7 times? My ink was not dry i just need to refill them mainly the tricolor one though. Thank you!

    • @BCHTechnologies
      @BCHTechnologies  4 года назад

      I am not sure what you mean by “seven times.” However, if you bought a remanufactured cartridge, it is definitely been refilled before.

  • @blogmemama
    @blogmemama 5 лет назад +1

    How to convert to CIS. My printer is HPdeskjet 2621

  • @cameltoeinspector6015
    @cameltoeinspector6015 4 года назад

    how many milliliters of ink goes into each color compartment of a hp 60 standard size color cartridge?

    • @BCHTechnologies
      @BCHTechnologies  4 года назад

      I will do 10 ml on black and 3-4 ml each color

  • @ellenquinn1110
    @ellenquinn1110 5 лет назад +1

    Hi Your video says this technique works on the HP 65 cartridge, but the product isn't listed on your website. Do you sell a kit for the HP 65?

    • @BCHTechnologies
      @BCHTechnologies  5 лет назад +1

      It is here: www.bchtechnologies.com/ink-refill-kit/refill-kit-for-hp/first-timer-ink-refill-kit-by-bch-for-hp-inkjet-printer-cartridges-60-61-62-63-64-65-everything-included-for-an-easy-refill-4-color-black-kcmy-priming-clip-tool.html

  • @camsmith1519
    @camsmith1519 4 года назад

    does the kit that you brought work for the HP67 cartridges?

  • @gavins7542
    @gavins7542 6 лет назад +5

    Can you keep refilling the cartridge forever? Or will some parts of it die at some point?

    • @BCHTechnologies
      @BCHTechnologies  6 лет назад +4

      Each refill puts stress on the cartridge. So less refills = longer life. Regular people can refill 3-5 times (

    • @gavins7542
      @gavins7542 6 лет назад +1

      @@BCHTechnologies so is this the right kit to make them refillable? www.bchtechnologies.com/modification-kit-for-making-spongeless-cartridge-with-hp-integrated-cartridges-60-61-62-63-64-65-66-67-68-69-70-as-rfc-hpsq.html

  • @designbyrawaz
    @designbyrawaz 4 года назад

    Really helpful

  • @vinceabel9892
    @vinceabel9892 4 года назад

    Does anybody know if an HP 63 ink cartridge I can put a 65 minute and where work

  • @johnsewruk1814
    @johnsewruk1814 5 месяцев назад

    WARNING ! I filled up my 61 up cartridge till ink came out of holes like in this video and it was a mess. I was wiping up ink and it would not stop and then I used the syringe and needle and sucked out the excess ink. I have not tried to print yet.Making sure ink stopped leaking.

    • @BCHTechnologies
      @BCHTechnologies  5 месяцев назад

      Don't overfill. Your goal is to get the sponge wet inside, not building a swimming pool.

    • @johnsewruk1814
      @johnsewruk1814 5 месяцев назад

      @@BCHTechnologies The guy in the video shows him filling till ink comes out of the holes. I thought it would be ok to fill it. This was my first time refilling an ink cartridge.

  • @sigitwaskito592
    @sigitwaskito592 2 года назад

    Bro, HP ink 65 and 67 it's same or not?

    • @BCHTechnologies
      @BCHTechnologies  2 года назад

      No they are different.

    • @sigitwaskito592
      @sigitwaskito592 2 года назад

      @@BCHTechnologies thanks bro

    • @sigitwaskito592
      @sigitwaskito592 2 года назад

      @@BCHTechnologies one more, i have liquid ink(bk & color) cannon G4000. Its okay or not if i refill to hp 67.

  • @XsavioR38
    @XsavioR38 5 лет назад

    Great video ty.

  • @brittany9914
    @brittany9914 Год назад

    Lol "just don't tell your girlfriend" hahaha. Thank you Kevin!

  • @sonati6952
    @sonati6952 4 года назад

    Great 👍

  • @milagrorivera8904
    @milagrorivera8904 4 года назад

    My printer uses 65 can i use 64

  • @valorousowl
    @valorousowl 6 лет назад +1

    thank you sir

  • @FoxyStealth
    @FoxyStealth 6 лет назад +1

    How many ml on each color?

    • @BCHTechnologies
      @BCHTechnologies  6 лет назад +1

      About 3-4 ml each color and 7-10 ml black. If you have the squeeze bottle, 3-4 squeezes each color and 7 squeezes for black.

  • @andymohammed4393
    @andymohammed4393 5 лет назад

    how to reset hp 2675 reading low ink

    • @BCHTechnologies
      @BCHTechnologies  5 лет назад

      You can’t. However, it will allow you to keep printing

  • @boogalingous1
    @boogalingous1 4 года назад +1

    You need to cycle the cartridges to reset the chip.

    • @ic3dragons223
      @ic3dragons223 4 года назад

      how do you cycle them? Let it run out? I cant seem to reset them :(

  • @yavonae
    @yavonae 3 года назад +2

    HP makes their money on the ink cartridges. The cost of the color 67 cartridge is now $20. You will end up paying more for ink than the printer itself. AND HP has applied a chip on the cartridges so they are non-refillable. I've tried refilling them and it didn't work for me. They say you need to reset the chip. .?

  • @True5diy
    @True5diy 4 года назад

    This example with the HP 60 Color is not compatible with HP 63. The 63 has Yellow on the left chamber not the top like this example shows.

  • @Lisas_Chatroom
    @Lisas_Chatroom 5 лет назад

    Never thought of the vacuum cleaner... thank you :)

    • @Lisas_Chatroom
      @Lisas_Chatroom 5 лет назад

      Kevin, I refilled but it's not working... it is coming out of the bottom but when I put in printer it works on one sheet of paper and then no ink. Could it be I put too much in? How can I fix? Thank you...

    • @catslivesmatter1268
      @catslivesmatter1268 5 лет назад

      @@Lisas_Chatroom after refilling any cartridges , it's recommended to let it sit in the printer for a period of at minimum of 1.5 hours , however this video is completely wrong ! Look up your original cartridge refill procedure ! You don't have to drill holes in any cartridges and sometimes it's better to check with your local Drugstore and get it refilled for less than 3 dollars ! This video needs to be removed ! Never use a vacuum cleaner on a ink cartridge !!! Please ignore this guy

  • @hannahdiel
    @hannahdiel Год назад

    I dont have vacuum cleaner

  • @robertbutler8004
    @robertbutler8004 5 лет назад

    Here is a good example of not to let your cartridges dry out. Refill before they dry out.

  • @axonis2306
    @axonis2306 6 лет назад +1

    That's why I got an Epson Ecotank printer. No more messy refills, clogs, steaming, vacuuming, spills and finally cartridges that simply don't work.

    • @BCHTechnologies
      @BCHTechnologies  6 лет назад +1

      There will be clogs. I will do another video for unclogging EcoTanks, steaming, vacuuming, sucking, flushing...

    • @axonis2306
      @axonis2306 6 лет назад +1

      OK, but please try to be neat. In most of your videos you make a mess even when you fill refillable cartridges.

    • @BCHTechnologies
      @BCHTechnologies  6 лет назад +1

      Good point. I will try.

    • @shaaronie
      @shaaronie 6 лет назад +1

      I have one of those sitting in a corner because it prints streaks of ink at the bottom of my prints and claims to be low ink when I just filled the damn thing. Expensive junk!

    • @jamessoos5753
      @jamessoos5753 Год назад

      Hope you print often with the eco tank or the ink will clog the printhead

  • @ИванТопский-б3ж
    @ИванТопский-б3ж 3 года назад

    あなたが好きなすべてのグループメンバーに投票することができます

  • @cejuvlogs9766
    @cejuvlogs9766 3 года назад +3

    Scripture: "By humility and the fear of the Lord are riches, and honour, and life." Proverbs 22:4 KJV

  • @zainabshah4012
    @zainabshah4012 2 года назад

    The sound of the videos is not good

    • @trishfrench1927
      @trishfrench1927 11 месяцев назад

      The sound is fine. Maybe it's your equipment. If you are refering to when he is opening the package of ink, there is no audio 2:58-3:15. Have a good day ;)

  • @derekd4221
    @derekd4221 6 лет назад +1

    refilling doesnt work anymore for new printers, the chip wont allow another use, it estimates what it has used then shuts down. game over.

    • @BCHTechnologies
      @BCHTechnologies  6 лет назад +1

      Well, give me the printer model number.

    • @LIVITLUVIT
      @LIVITLUVIT 4 года назад

      @@BCHTechnologies most all new printers scam you ..even if thr cartridge is full but you printed 200 pages it says empty and wont let itbe used anymore HP IS A SCAM! hp deskjet 2652

  • @andyllake7482
    @andyllake7482 2 года назад

    「内容を明確にする必要があります」、