So I've "liked,sub'd,and commented" will this grant me an audience with the watchmaker!? I've an omega seamaster DeVille that belonged to my father in law. This is one of the few things that didn't get stolen that my wife has left from her father that wasn't stolen by her family! I'd like to inquire about getting it fixed.
Richard, I have severe depression, anxiety and PTSD. Watch you work and listening to your explanation and calm voice is one of the very few times that I can fully relax and concentrate on the process and detail. To put this into context, I find it difficult to concentrate to read a letter let alone a book, and I have not watched a "full" beginning to end film in many years. Thank you for all your effort and sharing of your professional world. Kind Regards
Get into watchmaking ❤ best wishes to you my friend. Took me a lifetime to overcome some of my depression and learn to live in peace. It’s not overnight but it’s a worthwhile journey
@cullercoats tunnel of love You should check out Wristwatch Revival. Marshall has a very soothing voice and I love his enthusiasm. He sounds so joyful when he gets a busted old watch running again
Top quality video with a lovely tribute to our HRH. I hope the official Rolex service centre who turned their backs on this watch see this video and realize they have not stood by the brand ethos they 'seem' to have, and are happy to let the customer down. I am sure you will have gained some Rolex customers now Richard - superb job well done!
Every time I hear of Rolex failing to stand behind a product they sold of servicing it, I just think to my self that with a million watches sold a year for nearly 2 decades, I then think how many in house service techs does Rolex employ and how big is there service center insurance policy 😅😅😅
I can see your point, but try to see it from Rolex's position too. They're a highly respected brand and company. If a watch has been opened or interferred with in any way (especially in this case with non-Rolex parts fitted) they usually won't touch it. Even their authorised service agents usually won't. If a manufacturer in that situation does agree to take on the repair, they're going into dangerous territory which could leave them exposed to litigation if the repair goes badly due to what's been done to the item. That's why most manufacturers have clear policies stating they won't service or repair items like that. Some even go further and state unless an item has been serviced (sometimes at recommended intervals) by them or their authorised service agents, they won't be able to help you. That's why with any expensive high value purchases, especially those still under warranty or with an extended warranty, you really need to ask the seller these questions and ideally have evidence of authorised repairs/service history before you buy, if it's been repaired or refurbished.
@@paullangton-rogers2390 There were no non-rolex parts fitted. This was a simple case of a poorly serviced watch with missing parts. How do you suppose A Lange & Sohne [for example] would react here? I would hope that they would offer compassion and a fix for a similar problem. I personally wouldn't have a Rolex as its become the home of the nouveau riche.
@@allanmaureenmacintyre4474 Used to have a Rolex, lost it on a skiing trip though. My father gifted me an Omega to replace it. Bit of chonker that one but I wear it nonetheless. I get it serviced and cleaned every other year. Having that done is usually free at their registered services.
They were 100% in the right not to service that watch if it actually had all those fake parts in it. You want to see a vid where Rolex refused to fix a $25000 watch that wasn't fake? Go over to Wristwatch Revival. Marshall does one that was taken swimming in the ocean and the crown was pulled out so saltwater got in. It needed a couple of parts and a full service and they refused to repair it. Go watch the vid. It's a pretty good one.
To all of us that have managed to deconstruct something relatively simple and struggle to put it back together, your knowledge, expertise and calmness is inspiring. You sir, are a master of your art.
Great video... I was a soldier as well in the British Army for 18 years (87-05)... my son is training to be a watch maker and was born in West Germany. He loves what he does and cannot think of anything else he wants to do.
Richard that was a touching tribute to the Queen at the end of your video. Besides all the truly wonderful things the Queen did throughout her reign, she obviously appreciated your military personnel and was comfortable around them. My condolences on your country's loss.
"You seem to know what you are doing..." is intended to mean the opposite by using this classic understatement, which adds a little bit of humor and levity to the issue, since its one that goes without question, hence the comedic effect of the usage of this understatment. In other, shorter words, this is a compliment.
Reminds me of the time my mother bought a Ford pickup at a school surplus auction, without my assistance. It had belonged to the agriculture department, and the kids had poorly cobbled a Chevrolet engine into it it. We sold it to a man that had just wrecked his Ford van, but it still had a good engine and transmission.
As a bricklayer I have had " you seem to know what you are doing " water off a ducks back as people are just frightened to just trust you and that's understandable considering the money things cost and it's usually borrowed. Brilliant work by a extremely capable and patient watch maker. I would love such a gift with all it's history. Thank you
I think it's more about, how much confidence can a lay person have about a watchmaker on RUclips? As far as he knows, he looks like he knows what he's doing, and that's about as good as someone with his knowledge can say. It shouldn't be taken as an insult at all
I tried to to get my first automatic watch (Seiko SNK809) regulated as it was gaining 5 minutes within the first hour of charge. Watch repair shop in the mall told me to take it to the manufacturer, but at that time the warranty had already expired. Took it to a local clock repair shop and they told me they don't regulate automatic movements, they mainly like to buy and sell "vintage stuff." Later found out that the watch may have been magnetized. It seems as though watchmaking is not as popular in my area. Glad to see people like you who are keeping the spirit ALIVE. Superb job in the restoration! You make it look very easy to do.
I love watching these kind of videos. They're so satisfying - taking something broken and making it clean and right. Mad respect to you - you make it look so easy. I bought a bunch of tools on Amazon and tried replacing the movement in one of my busted Seikos once and it was a disaster - so I have at least a little perspective to say that.
@@jeffkeith637 I think I should have bought some sacrificial watches to practise on, too. Apparently the solars have some special juju involved and starting with one of my good divers was a bad idea! Nothing would break free like in any of the videos so I figured I needed to let the pros handle it.
Fascinating. I was never into mechanics of things and was a nurse for 20 years. But after watching a few watch restorations, I am fascinated by the intricacies and pieces. I love watching watches come back to life.
Hi Normadia Van... I stand in awe of medical professionals. When I fix a watch I am able to take it all apart. You guys have to fix people whilst 'the engine is still running'! Thanks for the feedback. Richard
Coming from somebody that is having kittens over rewiring a pull cord, Richards skill and dedication and patience is a joy to behold. So very well done, fantastically interesting and also a wonderful instructional video for people that are doing this wonderful work. Thanks for this.
Quality production. I always look forward to your videos and the knowledge you pass on to your community of viewers. I appreciate the tribute to The Queen.
Thanks Richard. Watching this video was a real tonic, helping to take a break from all the sadness and sorrow of the last few days. RIP Our beautiful Queen Elizabeth.
Hi Station Plaza ... Very good to hear from you! Yes, that was part of my plan and to do so in a low key, quiet. respectful way so very pleased that seems to have worked a little! Richard
As a former naval surgeon I appreciate Richard Perrett's patient and extremely detailed deconstruction, his analytical decision and extremely highly skilled reconstruction of original Rolex parts to make this watch authentic again. The video was very satisfying to watch, and was easy to follow and enjoyable all in one. I am grateful and glad to have found Richard's channel. A very merry Christmas to you! 🌻🌻🌻
Such a nice comment! I am in awe of surgeons. A surgeon has to do highly intricate work which I guess is in some respects similar to that of the watchmaker but there seems to me to be two important differences. The stakes are way higher for the surgeon and he or she has to complete the work 'with the engine running'! But very kind feedback and much appreciated. Richard
I see the connection The watch maker is reconstructing a watch from a clinical perspective as for precision but with no time restraints. You Dr. have the added pressure of opening and closing up the article in a far shorter time with no room for failure. The watchmaker will always get the subject matter ticking again . TY for your service
Just had this video show up as recommended channels. Amazing video, I love the way you explain everything that you are doing. I have always been interested in getting myself a vintage Rolex from the year I was born, but always worried as well about genuine parts that have been replaced with non genuine. At least now when I do get one I know I could always send it to you as "you seem to know what your doing " 😀
Mesmerising to witness such precision. Beautiful to share in a real craftsman's patience. Thank you Richard, that was glorious. It took me away from doing some research I need to present next week. And far more enjoyable too.
One of the best watch repair videos I have ever had the pleasure to watch, thank you Richard. Even brought a tear to my eye at the end and what a lovely tribute to the great lady.
OMG, that was your spring !! I was visiting family in Dublin ( I was born on Victoria St), and at a bar in Glasnevin, and this little spring appeared in my Murphys. I thought it fell out of my GMT Master II ;)
Awesome video, a great joy to watch - thank you! I wonder which parts were non-Rolex and if the missing jewel was the only reason the watch ran fast by hours per day?
Thank You Richard, just found your channel. You have convinced me my vintage Explorer is worth sending back to Rolex. Very nice touch at the end video.
Feast for the eyes as always! Great nuggets of wisdom around buying off eBay for us young guys. You seem to know what you're doing with quite a few watches, not just Rolex!
wow.. my first time here. Your vlog is like listening to a storybook while you work. I'm in the states and looking forward to purchasing one of the watches that you build.
Handset, dial, automatic winding gears, one wheel of train, crystal - judging from me watching this at like 360P due to my bad internet connection.There may be more.
Thank you sir for sharing, indeed impressive craftsmanship and professionalism. My old man used to fix watches but I never followed, simply didn’t have the patience. And now look like I enjoy watching the watch maker. Thank you ❤
dont know if its because you have been an instructor but i find your style very entertaining instructive and encapsulating i never thought that icould find this subject so very interesting
Ferrari master tech here. I enjoy the content, thank you. I might be looking at going into watch making as my next career move, watch movements remind remind me of a DCT gear box rebuild I do from time to time, this might be a good move for me as I get older my body wont allow me to keep fixing vehicles. I am learning a lot form your content.
One of the best video I have ever seen about watches, you are amazing and your voice is hypnotic. Thank you very much for this stunning video and greetings from Italy!!
Top notch detailed work far beyond the ken of 99% of us. I always enjoy hearing the numbers, as in what he paid, what its value was coming into the service shop, and what the value was going out ! (USA)
My favourite watch restoration channel so far has been Marshall`s over at Wristwatch Revival, came across yours today and your format is similar to Marshall`s where you actually talk as you dismantle and reassemble the watch, explaining things and what the parts are, unlike many on here who just silently strip and rebuild watches, which is annoying coz you learn nothing about the movement, this year i`ll be dipping my toes into this hobby as i find it therapeutic and calming, i`m 53 from West Midlands UK, kitchen fitter for almost 40 years so i can appreciate the care and patience you need for this hobby, been a pleasure to watch your video today mate, Happy New Year and all the best. Glen / AKA Claypole from `Rent - A - Ghost` lol
Interesting feedback Glen. Marshall 's work and films are top notch for sure. Glad you enjoyed this video too. Thanks for taking the time to share your thoughts. Richard
@@richardperrettwatchmaker cheers mate, ive subscribed, and in the process of watching all your previous work videos, also thank you for your years of service, i have some very close friends who served, some in The Falklands Conflict and some who saw recent action in Afghanistan and the middle east, next time we up the Legion i`ll toast your good health Sir.
Thanks Kent ... Yes, been pretty busy and I prefer to offer something that's maybe of higher value less often than lower value frequently. Good to heear from you. Richard
Another wonderful video Richard!! A missing jewel? Wow. That watch really needed your attention!! Imagine my surprise getting up this AM, pouring my coffee and enjoying your video!! Thank you my friend!!
@@richardperrettwatchmaker I was pleasantly surprised to see an upload from you. It seems like forever since your last one! Hope all is well with you and yours. Say, what were the “counterfeit” parts?
Well done as usual Richard. The entire disassembly, subsequent cleaning, and reassembly were relaxing to watch (pardon the pun). This being said, I must admit the most gratifying part of this episode was the very poignant reckoning of her majesty, the Queen. You honor her with such dignity, and respect. The quote you cited (of her many), was befitting of her sense of service to the United Kingdom, and commonwealth. I admire this gesture for its simplicity and gentleness. Thank you for including it.
So glad she is finally gone. Another coffin nail in the medieval monarchy scam. Not long until we get a republic now and rid of all those Saxe-Coburg Goethe parasites. Nice watch video by the way.
Wow, what a beautiful result! I am a bit disappointed that Rolex refused to work on it, did you uncover many of these modifications or aftermarket parts they spoke of? Regardless, it ended up in the correct hands. I have been wearing a 16710 GMT every day for about 20 years and have never had it serviced. The had best look into it!
@J PK Thank you for answering this... like many others here I was also curious what parts Rolex had objected to. It surprises me that they were bothered by aftermarket cosmetic parts, though. Of course the hands and dial should not affect the running of the watch. So Rolex must be using these evidence that a non-official watchmaker had "been in" the watch. If so, I consider it disingenuous of them, and unfair to any owners of these watches who would want official service, and who are blameless to any past modifications. But furthermore, I'd be curious just how they know for certain that the dial and hands were not replaced by an official Rolex repair shop? Are they under some strict edict that they can't swap out faces? My understanding is they often do this, to the detriment of some classics. I think their rejection of this watch for repair is more a reflection a poor attitude on Rolex's part. I think it is more that they want to stifle the aftermarket servicing field entirely. Others may think this is a good thing, but I don't appreciate when companies try to control a person's use of an item after sale, in order to boost their own revenue (ahem... Tesla).
@J PK I can't disagree with anything you wrote, really. Well put, all good points. It is "harsh" policy, but it is their prerogative to do things this way. And I suppose it is silly to argue with their methods and practices, because the brand does have loyalty and a wonderful reputation.
A Great and Informative video once again, Thanks! Did You find any "unofficial" critical parts in the watch? I noticed either the previous polishing job being really bad or then the Bracelet being a cheap fake. On the other hand the back plate looked wrongly polished too, so perhaps the Bracelet is just a victim of some "maintenance" too. Why couldn't Rolex UK just replace all parts they deemed unoriginal, service the watch and charge accordingly and let the customer do the whining? Actually not that more expensive as they at Rolex tend to change half the parts of the movement anyway. Would have repolished the case and bracelet too.
Yes. Not to put too fine a point on it but they could've just replaced the movement if there was extensive 'modification and counterfeit parts.' Maybe the customer declined that.
Dial is marked with tritium 'T' marker. There's no tritium on the dial or the hands that I can see. Glass probably looked off as well. Dial or the hands, or both, don't fit the watch. The date wheel being between dates may have been taken as an indication that there's no Rolex movement inside as well.
The bracelet was an aftermarket part. The dial was likely fitted with diamonds by a jeweler and not Rolex. I'd bet that was the sticking point. Rolex would have asked to have the dial and bracelet replaced with their service parts which could have been more than he paid for the watch originally. Also the case screws seemed to be a bit wrong. As if they used movement tabs and sanded them down versus the case screws having a large enough head to fit into the case lip for retention.
Good explanation. Dial is marked with tritium T, so hands are probably not original as well, as I doubt they'd bother luming the dial without the hands.
Thanks for that! I did wonder what all of the counterfeit parts were... Seems a bit tetchy of Rolex to make such a big deal about parts that effectively have no effect on the function of the watch!
@@krugerdave I get why they do it if it’s a counterfeit part that was using the Rolex name but didn’t come from their factory. They generally are okay with a leather strap that’s aftermarket. The dial they will not be okay with as they did not get a chance to grade the diamonds before installation and if they allowed that then their repuatation would be hurt as people would think Rolex uses low grade diamonds and doesn’t set the stones well. Rolex would offer to replace the dial with a standard one that was appropriate to the model when originally sold.
I feel the pain as I have been through a similar situation and it’s sad that these eBay sellers don’t realise what type of problems and heartbreak can happen post the sale.
Richard, love you videos--great content and wonderful storytelling. Quick question--I saw you stored the balance cock with balance wheel attached in some sort of special box? Is this a homemade box or something specific that I can purchase? Thanks in advance--Levine98
Hi Jay ... Very nice to get such positive feedback so thank you. The box is my own creation although it's just a small component box with some grey foam inserted with a small hole in the middle. Sometimes the simplest things are the best. I disliking haning the balance on a stake as I thing this is not ideal for the hairspring and it leaves the balance too vulernable whilst other work is occuring close it it. thanks again. Richard
I have serviced computers professionally since 1997 and some of the more modern gaming laptops can have some very small screws nowadays but nothing compared to these watches and I really enjoy finding channels like this where watches are being serviced and restored. Thanks for posting.
He responded to another comment stating, “As for which parts which were imposters Rolex is the expert on this and they did not specify. Most of the movement looked good to me but like I say Rolex are the experts.”
Great video, as a Rolex owner and avid interest in things Rolex I'm curious as others have asked what exactly were Rolex objecting to as modifications ? Had the face been doctored with after market diamonds , or were the hands non Rolex? It all looked pretty legit othe than those . Where did the missing jewel go do you think , if it had split surely the parts would be in the case somwhere ? Maybe someone had already been messing around with it prior to its sale. Also I noticed the finished watch had a definite tick to the second hand as opposed to the smooth flow of my GMT master II, also the timegrapher beat was 18000 as opposed to 28800 which explains this but why 18000 ? Thought all were 28800 except some very old rare models. Why did the amplitude drop so much after you cased it? Would have been nice to have seen the watch mounted on its strap ready for presentation. So many questions ....sorry 😆 very interesting video though.
Likely either the diamonds were fake, or the contact just did not know these watch as well enough and didn’t feel comfortable servicing it. All of the old date just model 1603 have a much lower VPH of 18,000, making them very distinctive to watch their second hand.
I wanted to ask about the, was it 'non-standard parts'? Was it the glue around the bezel? I suppose Rolex have set-in-stone official methods & techniques to do things correctly. If the tech tries to separate something non-standard and breaks or bends it? So it's simpler to send the headache elsewhere. A high-street watchmaker will fix problems... a brand like Rolex are different. IMHO
Fabulous service to a non working Rolex... So much for Official Rolex Service centre.. You did a excellent job and now your friend/client can be confident on giving the gift that keeps on giving.. Kudos to you....
Great restoration/service, Richard. Now that you have sprinkled your fairy dust, would Rolex be minded to service the watch if it ever crossed their desk again? Not sure if you replaced the "counterfeit" parts, as you made no mention of that after stating Rolex's reason for not carrying out the service. Thanks for sharing - great video as always.
I had the same question, but he did say in response to another comment, “As for which parts which were imposters Rolex is the expert on this and they did not specify. Most of the movement looked good to me but like I say Rolex are the experts.”
@@BeckVMH I would bet the crystal and dial would be among the counterfeits. The watch glass is the most likely part to be damaged in use. Dial gets wet/dirty as a result. Why not replace the damaged original plain dial with a replica diamond dial? I paid close attention to the diamonds in the close ups of the dial. They seemed dead and lifeless. Rolex only uses top quality diamonds in their dials. They should have had more sparkle.
Hi Bob, I did not dwell on it in the video as my focus was to getting it working nicely but Rolex are correct as there are definitely 'imposters' in this watch. Hope this explains. Richard
I think it’s more simple; Rolex is a profoundly arrogant charity company. A company or organisation that genuinely cares about its customers would have fixed it, replacing any suspect parts as part of the service, ending up with a happy customer. Job done. But no, they don’t care about anyone except themselves. They get away with this attitude because there are just so many people mesmerised by the brand name they can sell everything they make, so they don’t need to treat customers fairly or with respect. In my experience they choose their ADs for having the same attitude. That said, a fascinating video of how to do a great job 👍
@@borassictime918 Rolex have the 'right' to refuse service if you don't abide by their terms, and they do execise that right, because they can. Terms are: you should have your watch serviced by Rolex ONLY... Just like independent service with Apple products voids your warranty, unauthorised parts in a Rolex is a clear sign it has had service done by an unauthorised watchmaker who, beside putting in presumably inferior parts, might or might not have done all sorts of nefarious things to the movement. Therefore Rolex can not guarantee it can bring your watch back to spec. Were it a historically significant, and thus valuable piece, they can agree to restore it for what I can only assume will turn out to be a small fortune. Like with all luxury vintage goods: because you can pay for it, doesn't mean you can afford it to really use it as anything more than a paperweight.
Happy to relax and see this very interesting video ! I’m always surprise to understand that Rolex do not work on it !! Anyway it’s good for you to work on and restart it as well ! Final assembly is perfect and look good ! Thanks for sharing Mr.Richard and have a good day !!✨👌
Nice job, great to watch. I have been watching your vlogs since you started and you actually did a service on my Explorer 39mm some years ago. Being (like yourself) ex military the thing I appreciate the most was your ER section at the end. Bless her heart . I will miss her RIP QEII I have re subscribed. I had forgotten how fascinating and relaxing your tear down and rebuilds are to watch. Almost ASMR :)
I don’t know what audio system your working with but my dogs are hearing the background! That’s rare sound is clear and authentic enough to trick their ears! Good quality equipment!
Amazing and totally fascinating. Watched the whole video, from start to finish. Loved the way you joked about your client who could have said more about your skills with working Rolex watches. You missed an opportunity to record your client's words AFTER he received the repaired Rolex watch. THAT would have been much more convincing of your skill level! Also, it was very interesting to know how the factory Rolex repair division sent the damaged watch back to the owner claiming the watch was a heavily modified Rolex. YOU took on the challenge of working with the damaged watch when even the factory employees didn't want to deal with it. Kudos to you. Finally, what you found to be THE main problem was a missing jewel. You replaced the missing jewel with a new one. My question is: what happened to the original jewel that fell out of it's place? Why wasn't it found within the watch case? If the jewel fell out, shouldn't it have been contained within the sealed watch case?
I loved the tribute towards the end for Her Majesty, may she rest peacefully. That said, I've seen a few comments saying they liked the tribute to HRH. That's not correct, HRH (Her/His Royal Highness) is given to senior royals, but the Queen/King is Majesty.
*A nice, elegant tribute at the end there, to Her Majesty Queen Elizabeth II. Oh....and a great job on the watch, too. Pub drinkers across Dublin and mariners on the Irish Sea are all relieved, at least for now.*
Great video . . . We now know where to send a second-hand watch for full restoration. From your video - it seems a good idea to check the movement accuracy and consistancy as part of the buying process. With cars I used to buy used - then pay for the most comprehensive service from a trusted garage.
This was an awesome video, I love how detailed and easy to follow along it was.
I have rolex of my father and I want to restore it for my self how can i contact you sir
Always enjoy your work Richard
I love the ending, I really admired her majesty she was some woman 😢.
Very well done , I can tell this is a labor of love for you. And the way you explain each and every step is very impressive. Kudos from the USA
So I've "liked,sub'd,and commented" will this grant me an audience with the watchmaker!? I've an omega seamaster DeVille that belonged to my father in law. This is one of the few things that didn't get stolen that my wife has left from her father that wasn't stolen by her family! I'd like to inquire about getting it fixed.
Richard, I have severe depression, anxiety and PTSD. Watch you work and listening to your explanation and calm voice is one of the very few times that I can fully relax and concentrate on the process and detail. To put this into context, I find it difficult to concentrate to read a letter let alone a book, and I have not watched a "full" beginning to end film in many years. Thank you for all your effort and sharing of your professional world. Kind Regards
Get into watchmaking ❤ best wishes to you my friend. Took me a lifetime to overcome some of my depression and learn to live in peace. It’s not overnight but it’s a worthwhile journey
As an ab initio I have repaired some simple watches.This was AWESOME !! I look forward to buying my first Rolex ...and sending it to you ,,😉
Il faut acheter des tablettes de valériane plantes pour se calmer ..
@@aigcess22 Thank you for your concern and advice. Best Regards .Mac
@cullercoats tunnel of love You should check out Wristwatch Revival. Marshall has a very soothing voice and I love his enthusiasm. He sounds so joyful when he gets a busted old watch running again
Top quality video with a lovely tribute to our HRH. I hope the official Rolex service centre who turned their backs on this watch see this video and realize they have not stood by the brand ethos they 'seem' to have, and are happy to let the customer down. I am sure you will have gained some Rolex customers now Richard - superb job well done!
Every time I hear of Rolex failing to stand behind a product they sold of servicing it, I just think to my self that with a million watches sold a year for nearly 2 decades, I then think how many in house service techs does Rolex employ and how big is there service center insurance policy 😅😅😅
I can see your point, but try to see it from Rolex's position too. They're a highly respected brand and company. If a watch has been opened or interferred with in any way (especially in this case with non-Rolex parts fitted) they usually won't touch it. Even their authorised service agents usually won't.
If a manufacturer in that situation does agree to take on the repair, they're going into dangerous territory which could leave them exposed to litigation if the repair goes badly due to what's been done to the item. That's why most manufacturers have clear policies stating they won't service or repair items like that.
Some even go further and state unless an item has been serviced (sometimes at recommended intervals) by them or their authorised service agents, they won't be able to help you. That's why with any expensive high value purchases, especially those still under warranty or with an extended warranty, you really need to ask the seller these questions and ideally have evidence of authorised repairs/service history before you buy, if it's been repaired or refurbished.
@@paullangton-rogers2390 There were no non-rolex parts fitted. This was a simple case of a poorly serviced watch with missing parts. How do you suppose A Lange & Sohne [for example] would react here? I would hope that they would offer compassion and a fix for a similar problem. I personally wouldn't have a Rolex as its become the home of the nouveau riche.
@@allanmaureenmacintyre4474 Used to have a Rolex, lost it on a skiing trip though. My father gifted me an Omega to replace it. Bit of chonker that one but I wear it nonetheless.
I get it serviced and cleaned every other year. Having that done is usually free at their registered services.
They were 100% in the right not to service that watch if it actually had all those fake parts in it.
You want to see a vid where Rolex refused to fix a $25000 watch that wasn't fake? Go over to Wristwatch Revival. Marshall does one that was taken swimming in the ocean and the crown was pulled out so saltwater got in. It needed a couple of parts and a full service and they refused to repair it. Go watch the vid. It's a pretty good one.
To all of us that have managed to deconstruct something relatively simple and struggle to put it back together, your knowledge, expertise and calmness is inspiring. You sir, are a master of your art.
Great video... I was a soldier as well in the British Army for 18 years (87-05)... my son is training to be a watch maker and was born in West Germany. He loves what he does and cannot think of anything else he wants to do.
The commentary adds so much to the restoration. Inspired by your innovations. Excellent tribute.
Great vid Major! You definitely "seem" to know what you are doing! As always, expertly done and magnificently narrated.
Richard that was a touching tribute to the Queen at the end of your video. Besides all the truly wonderful things the Queen did throughout her reign, she obviously appreciated your military personnel and was comfortable around them. My condolences on your country's loss.
DING DONG THE WIKED GOBLIN IS DEAD FINALLY
Thank you ,that's pure class.
"You seem to know what you are doing..." is intended to mean the opposite by using this classic understatement, which adds a little bit of humor and levity to the issue, since its one that goes without question, hence the comedic effect of the usage of this understatment. In other, shorter words, this is a compliment.
Reminds me of the time my mother bought a Ford pickup at a school surplus auction, without my assistance. It had belonged to the agriculture department, and the kids had poorly cobbled a Chevrolet engine into it it. We sold it to a man that had just wrecked his Ford van, but it still had a good engine and transmission.
Brilliant as always. Love the sentiment at the end to Her Majesty.
As a bricklayer I have had " you seem to know what you are doing "
water off a ducks back as people are just frightened to just trust you and that's understandable considering the money things cost and it's usually borrowed.
Brilliant work by a extremely capable and patient watch maker.
I would love such a gift with all it's history.
Thank you
I think it's more about, how much confidence can a lay person have about a watchmaker on RUclips? As far as he knows, he looks like he knows what he's doing, and that's about as good as someone with his knowledge can say. It shouldn't be taken as an insult at all
I tried to to get my first automatic watch (Seiko SNK809) regulated as it was gaining 5 minutes within the first hour of charge. Watch repair shop in the mall told me to take it to the manufacturer, but at that time the warranty had already expired. Took it to a local clock repair shop and they told me they don't regulate automatic movements, they mainly like to buy and sell "vintage stuff."
Later found out that the watch may have been magnetized. It seems as though watchmaking is not as popular in my area. Glad to see people like you who are keeping the spirit ALIVE. Superb job in the restoration! You make it look very easy to do.
I love watching these kind of videos. They're so satisfying - taking something broken and making it clean and right. Mad respect to you - you make it look so easy. I bought a bunch of tools on Amazon and tried replacing the movement in one of my busted Seikos once and it was a disaster - so I have at least a little perspective to say that.
oh dear. I've bought the tools and a couple of dodgy Seiko watches to practice on. What happened?
@@jeffkeith637 I think I should have bought some sacrificial watches to practise on, too. Apparently the solars have some special juju involved and starting with one of my good divers was a bad idea! Nothing would break free like in any of the videos so I figured I needed to let the pros handle it.
Fascinating. I was never into mechanics of things and was a nurse for 20 years. But after watching a few watch restorations, I am fascinated by the intricacies and pieces. I love watching watches come back to life.
Hi Normadia Van... I stand in awe of medical professionals. When I fix a watch I am able to take it all apart. You guys have to fix people whilst 'the engine is still running'! Thanks for the feedback. Richard
Coming from somebody that is having kittens over rewiring a pull cord, Richards skill and dedication and patience is a joy to behold.
So very well done, fantastically interesting and also a wonderful instructional video for people that are doing this wonderful work. Thanks for this.
Lol. A pull cord? Are you a man or a woman.
I don’t know which I like more watching you work on a time piece or listening to your soothing voice!
I like the owner narrating the story of how they got it as you take it apart. Great video!
he did a great job. was really interesting to listen to.
Whenever "I" need to unwind, Your videos are my go to! Thanks for sharing your impressive skill!
Quality production. I always look forward to your videos and the knowledge you pass on to your community of viewers. I appreciate the tribute to The Queen.
Thanks Atlanta Healey! It's so nice to know folks look forward to my stuff so saying so is much appreciated! Richard
Thanks Richard. Watching this video was a real tonic, helping to take a break from all the sadness and sorrow of the last few days.
RIP Our beautiful Queen Elizabeth.
Hi Station Plaza ... Very good to hear from you! Yes, that was part of my plan and to do so in a low key, quiet. respectful way so very pleased that seems to have worked a little! Richard
As a former naval surgeon I appreciate Richard Perrett's patient and extremely detailed deconstruction, his analytical decision and extremely highly skilled reconstruction of original Rolex parts to make this watch authentic again. The video was very satisfying to watch, and was easy to follow and enjoyable all in one. I am grateful and glad to have found Richard's channel. A very merry Christmas to you! 🌻🌻🌻
Such a nice comment! I am in awe of surgeons. A surgeon has to do highly intricate work which I guess is in some respects similar to that of the watchmaker but there seems to me to be two important differences. The stakes are way higher for the surgeon and he or she has to complete the work 'with the engine running'! But very kind feedback and much appreciated. Richard
Did he use genuine Rolex parts? They're hard to get.
I see the connection The watch maker is reconstructing a watch from a clinical perspective as for precision but with no time restraints. You Dr. have the added pressure of opening and closing up the article in a far shorter time with no room for failure. The watchmaker will always get the subject matter ticking again . TY for your service
@@robertbrandywinehe sats original parts in the first comment
Just had this video show up as recommended channels. Amazing video, I love the way you explain everything that you are doing. I have always been interested in getting myself a vintage Rolex from the year I was born, but always worried as well about genuine parts that have been replaced with non genuine. At least now when I do get one I know I could always send it to you as "you seem to know what your doing " 😀
Mesmerising to witness such precision. Beautiful to share in a real craftsman's patience. Thank you Richard, that was glorious. It took me away from doing some research I need to present next week. And far more enjoyable too.
Sehr beruhigend Dir bei der⌚️ Arbeit zuzusehen ! Danke dafür 🙋♂️
One of the best watch repair videos I have ever had the pleasure to watch, thank you Richard. Even brought a tear to my eye at the end and what a lovely tribute to the great lady.
OMG, that was your spring !! I was visiting family in Dublin ( I was born on Victoria St), and at a bar in Glasnevin, and this little spring appeared in my Murphys. I thought it fell out of my GMT Master II ;)
Awesome video, a great joy to watch - thank you! I wonder which parts were non-Rolex and if the missing jewel was the only reason the watch ran fast by hours per day?
Thank You Richard, just found your channel. You have convinced me my vintage Explorer is worth sending back to Rolex. Very nice touch at the end video.
It was a pleasure to see a new video from you, Richard. As pleasant as spring in Ireland and fall in Wales.
Haha! Good to hear from you 100amplifiers! Richard
Great work sir! That was a heart felt tribute to The Queen! God Bless!!!
Feast for the eyes as always! Great nuggets of wisdom around buying off eBay for us young guys. You seem to know what you're doing with quite a few watches, not just Rolex!
wow.. my first time here. Your vlog is like listening to a storybook while you work. I'm in the states and looking forward to purchasing one of the watches that you build.
Excelent job. And quite a nice ending with the Queen's photo and the flower. Well done indeed. CONGRATULATIONS
As usual this was so relaxing and entertaining to watch. I’m still wondering where the heavily modified components are that Rolex is referring to.
It could be someone removing the calender wheel jewel ?
@@821vbwalkndasd did he replace them with new ones?
Handset, dial, automatic winding gears, one wheel of train, crystal - judging from me watching this at like 360P due to my bad internet connection.There may be more.
Thank you sir for sharing, indeed impressive craftsmanship and professionalism.
My old man used to fix watches but I never followed, simply didn’t have the patience.
And now look like I enjoy watching the watch maker. Thank you ❤
Absolutely, outstanding work and a perfect result.
Thank you for your interesting, informative and inspiring videos.
dont know if its because you have been an instructor but i find your style very entertaining instructive and encapsulating i never thought that icould find this subject so very interesting
You guys amaze me !!!
I am a engineer and it’s amazing how many parts are in something so small !
Now it's good for another 60 years. Great job. Im thoroughly impressed. I also like your Major watches, very much.
A lovely video and and a touching tribute . I always look forward to your videos. Thank you so much for your work.
Thanks so mcuh Mark and very pleased you watched the ending! Richard
Ferrari master tech here. I enjoy the content, thank you. I might be looking at going into watch making as my next career move, watch movements remind remind me of a DCT gear box rebuild I do from time to time, this might be a good move for me as I get older my body wont allow me to keep fixing vehicles. I am learning a lot form your content.
Very nice work, as usual and a lovely tribute to your fellow veteran, the Queen.
One of the best video I have ever seen about watches, you are amazing and your voice is hypnotic. Thank you very much for this stunning video and greetings from Italy!!
Top notch detailed work far beyond the ken of 99% of us. I always enjoy hearing the numbers, as in what he paid, what its value was coming into the service shop, and what the value was going out ! (USA)
bloody marvelous !
nice low key tribute to end with too.
Hi Nunofyour Business! Thanks so much. So glad you watched to the end! Richard
Bravo. Fascinating and beautifully done. I am sure the owner will be pleased. RIP HM. X
My favourite watch restoration channel so far has been Marshall`s over at Wristwatch Revival, came across yours today and your format is similar to Marshall`s where you actually talk as you dismantle and reassemble the watch, explaining things and what the parts are, unlike many on here who just silently strip and rebuild watches, which is annoying coz you learn nothing about the movement, this year i`ll be dipping my toes into this hobby as i find it therapeutic and calming, i`m 53 from West Midlands UK, kitchen fitter for almost 40 years so i can appreciate the care and patience you need for this hobby, been a pleasure to watch your video today mate, Happy New Year and all the best. Glen / AKA Claypole from `Rent - A - Ghost` lol
Interesting feedback Glen. Marshall 's work and films are top notch for sure. Glad you enjoyed this video too. Thanks for taking the time to share your thoughts. Richard
@@richardperrettwatchmaker cheers mate, ive subscribed, and in the process of watching all your previous work videos, also thank you for your years of service, i have some very close friends who served, some in The Falklands Conflict and some who saw recent action in Afghanistan and the middle east, next time we up the Legion i`ll toast your good health Sir.
The Watch Repair channel is good, too, and he's started making videos again.
I was beginning to think I'd removed you from my subscribed list with it being so long Richard
Quality as always, 👍👍👍
Thanks Kent ... Yes, been pretty busy and I prefer to offer something that's maybe of higher value less often than lower value frequently. Good to heear from you. Richard
@@richardperrettwatchmaker Great philosophy there...and, to be honest, I'd rather watch the higher quality 😉
Lovely presentation, a joy to watch.
Another wonderful video Richard!! A missing jewel? Wow. That watch really needed your attention!! Imagine my surprise getting up this AM, pouring my coffee and enjoying your video!! Thank you my friend!!
Hi Joseph, Good to hear from you! So pleased this brightened up your morning sir! Richard
@@richardperrettwatchmaker I was pleasantly surprised to see an upload from you. It seems like forever since your last one! Hope all is well with you and yours. Say, what were the “counterfeit” parts?
this is absolutely a marvel to watch, it is really interesting how intricate these mechanical watches can become
Well done as usual Richard. The entire disassembly, subsequent cleaning, and reassembly were relaxing to watch (pardon the pun). This being said, I must admit the most gratifying part of this episode was the very poignant reckoning of her majesty, the Queen. You honor her with such dignity, and respect. The quote you cited (of her many), was befitting of her sense of service to the United Kingdom, and commonwealth. I admire this gesture for its simplicity and gentleness. Thank you for including it.
Hear ! Hear !
*Yes, well done Major.*
Yes, absolutely! A wonderful tribute too!
So glad she is finally gone. Another coffin nail in the medieval monarchy scam. Not long until we get a republic now and rid of all those Saxe-Coburg Goethe parasites.
Nice watch video by the way.
Wow, loved this video. There's something about your videos that make it very soothing to watch.
Wow, what a beautiful result! I am a bit disappointed that Rolex refused to work on it, did you uncover many of these modifications or aftermarket parts they spoke of? Regardless, it ended up in the correct hands. I have been wearing a 16710 GMT every day for about 20 years and have never had it serviced. The had best look into it!
@J PK Thank you for answering this... like many others here I was also curious what parts Rolex had objected to.
It surprises me that they were bothered by aftermarket cosmetic parts, though. Of course the hands and dial should not affect the running of the watch. So Rolex must be using these evidence that a non-official watchmaker had "been in" the watch. If so, I consider it disingenuous of them, and unfair to any owners of these watches who would want official service, and who are blameless to any past modifications.
But furthermore, I'd be curious just how they know for certain that the dial and hands were not replaced by an official Rolex repair shop? Are they under some strict edict that they can't swap out faces? My understanding is they often do this, to the detriment of some classics.
I think their rejection of this watch for repair is more a reflection a poor attitude on Rolex's part. I think it is more that they want to stifle the aftermarket servicing field entirely. Others may think this is a good thing, but I don't appreciate when companies try to control a person's use of an item after sale, in order to boost their own revenue (ahem... Tesla).
@J PK I can't disagree with anything you wrote, really. Well put, all good points. It is "harsh" policy, but it is their prerogative to do things this way. And I suppose it is silly to argue with their methods and practices, because the brand does have loyalty and a wonderful reputation.
Great video. Glad to see you back again, although under very sad circumstances.
Hi Mark ... Good to hear from you sir! And thank you so much! Richard
A Great and Informative video once again, Thanks!
Did You find any "unofficial" critical parts in the watch? I noticed either the previous polishing job being really bad or then the Bracelet being a cheap fake. On the other hand the back plate looked wrongly polished too, so perhaps the Bracelet is just a victim of some "maintenance" too.
Why couldn't Rolex UK just replace all parts they deemed unoriginal, service the watch and charge accordingly and let the customer do the whining? Actually not that more expensive as they at Rolex tend to change half the parts of the movement anyway. Would have repolished the case and bracelet too.
Yes. Not to put too fine a point on it but they could've just replaced the movement if there was extensive 'modification and counterfeit parts.' Maybe the customer declined that.
If I’m not mistaken they will refuse to service anything that hasn’t been done by an authorized dealer to persuade you to buy a new one
@@Shiznitt_ you’re mistaken.
Dial is marked with tritium 'T' marker. There's no tritium on the dial or the hands that I can see. Glass probably looked off as well. Dial or the hands, or both, don't fit the watch.
The date wheel being between dates may have been taken as an indication that there's no Rolex movement inside as well.
Amazing to watch, no pun intended, you perform your magic.
The bracelet was an aftermarket part. The dial was likely fitted with diamonds by a jeweler and not Rolex. I'd bet that was the sticking point. Rolex would have asked to have the dial and bracelet replaced with their service parts which could have been more than he paid for the watch originally. Also the case screws seemed to be a bit wrong. As if they used movement tabs and sanded them down versus the case screws having a large enough head to fit into the case lip for retention.
Very well observed Michael! Richard
Good explanation. Dial is marked with tritium T, so hands are probably not original as well, as I doubt they'd bother luming the dial without the hands.
Thanks for that! I did wonder what all of the counterfeit parts were... Seems a bit tetchy of Rolex to make such a big deal about parts that effectively have no effect on the function of the watch!
@@krugerdave I get why they do it if it’s a counterfeit part that was using the Rolex name but didn’t come from their factory. They generally are okay with a leather strap that’s aftermarket. The dial they will not be okay with as they did not get a chance to grade the diamonds before installation and if they allowed that then their repuatation would be hurt as people would think Rolex uses low grade diamonds and doesn’t set the stones well. Rolex would offer to replace the dial with a standard one that was appropriate to the model when originally sold.
I feel the pain as I have been through a similar situation and it’s sad that these eBay sellers don’t realise what type of problems and heartbreak can happen post the sale.
Richard, love you videos--great content and wonderful storytelling. Quick question--I saw you stored the balance cock with balance wheel attached in some sort of special box? Is this a homemade box or something specific that I can purchase? Thanks in advance--Levine98
Hi Jay ... Very nice to get such positive feedback so thank you. The box is my own creation although it's just a small component box with some grey foam inserted with a small hole in the middle. Sometimes the simplest things are the best. I disliking haning the balance on a stake as I thing this is not ideal for the hairspring and it leaves the balance too vulernable whilst other work is occuring close it it. thanks again. Richard
I have serviced computers professionally since 1997 and some of the more modern gaming laptops can have some very small screws nowadays but nothing compared to these watches and I really enjoy finding channels like this where watches are being serviced and restored. Thanks for posting.
Wonderful video. Brilliant job on the Rolex. Would love to hear the comments from the owner once he has it back. Cheers Mate
Thanks so much Craig. Yes maybe I should do a follow video! Thanks again Richard
That is a neat trick with the Rodico on the springs. Nice tip.
Excellent video Richard. It wasn't clear - aside from the missing jewel, were there any counterfeit parts actually in the movement?
He responded to another comment stating, “As for which parts which were imposters Rolex is the expert on this and they did not specify. Most of the movement looked good to me but like I say Rolex are the experts.”
Thanks Richard a great video with your usual expertise, lovely tribute to H.M.
Great video, as a Rolex owner and avid interest in things Rolex I'm curious as others have asked what exactly were Rolex objecting to as modifications ? Had the face been doctored with after market diamonds , or were the hands non Rolex? It all looked pretty legit othe than those . Where did the missing jewel go do you think , if it had split surely the parts would be in the case somwhere ? Maybe someone had already been messing around with it prior to its sale. Also I noticed the finished watch had a definite tick to the second hand as opposed to the smooth flow of my GMT master II, also the timegrapher beat was 18000 as opposed to 28800 which explains this but why 18000 ? Thought all were 28800 except some very old rare models. Why did the amplitude drop so much after you cased it? Would have been nice to have seen the watch mounted on its strap ready for presentation. So many questions ....sorry 😆 very interesting video though.
Likely either the diamonds were fake, or the contact just did not know these watch as well enough and didn’t feel comfortable servicing it. All of the old date just model 1603 have a much lower VPH of 18,000, making them very distinctive to watch their second hand.
I wanted to ask about the, was it 'non-standard parts'? Was it the glue around the bezel?
I suppose Rolex have set-in-stone official methods & techniques to do things correctly. If the tech tries to separate something non-standard and breaks or bends it? So it's simpler to send the headache elsewhere.
A high-street watchmaker will fix problems... a brand like Rolex are different. IMHO
The balance acts like a butterfly trying to escape. What a delicate work, thank you for a very interesting video!
Beautiful work as always Richard, almost looked like mould on the frame during the strip down. Also, love the tribute at the end, HRH will be missed 😔
Fabulous service to a non working Rolex... So much for Official Rolex Service centre.. You did a excellent job and now your friend/client can be confident on giving the gift that keeps on giving.. Kudos to you....
Thanks Thomas! Richard
Great restoration/service, Richard. Now that you have sprinkled your fairy dust, would Rolex be minded to service the watch if it ever crossed their desk again? Not sure if you replaced the "counterfeit" parts, as you made no mention of that after stating Rolex's reason for not carrying out the service. Thanks for sharing - great video as always.
I had the same question, but he did say in response to another comment, “As for which parts which were imposters Rolex is the expert on this and they did not specify. Most of the movement looked good to me but like I say Rolex are the experts.”
@@BeckVMH I would bet the crystal and dial would be among the counterfeits. The watch glass is the most likely part to be damaged in use. Dial gets wet/dirty as a result. Why not replace the damaged original plain dial with a replica diamond dial? I paid close attention to the diamonds in the close ups of the dial. They seemed dead and lifeless. Rolex only uses top quality diamonds in their dials. They should have had more sparkle.
Good to see a video upload from you again! I hope you and your faimily are all well.
Thanks Daud 1976! Good to hear from you. Richard
R I P Our Queen she will be greatly missed !!
Is it true that oats will be served at the next State Dinner?
Lovely work, loved the video too, must be so pleasing to see the end result, Thank you
Thanks Robert. Very pleased that you enjoyed this and thank you so much for taking a moment to say so. Much appreciated. Richard
Nice comment
And the first! Nice work! Richard
Great video! Which parts weren't original though? I didn't notice you change anything besides the glass?
So Rolex's line about counterfeit parts is BS? Or did I miss something?
Hi Bob, I did not dwell on it in the video as my focus was to getting it working nicely but Rolex are correct as there are definitely 'imposters' in this watch. Hope this explains. Richard
@@richardperrettwatchmaker it would have been great if you could show us which were the counterfeit parts and tell us how to spot them!
I once saw a video where the person (can't remember who)had a diamond stud face on his Rolex and they refused to service as it was not from them.
I think it’s more simple; Rolex is a profoundly arrogant charity company. A company or organisation that genuinely cares about its customers would have fixed it, replacing any suspect parts as part of the service, ending up with a happy customer. Job done.
But no, they don’t care about anyone except themselves. They get away with this attitude because there are just so many people mesmerised by the brand name they can sell everything they make, so they don’t need to treat customers fairly or with respect. In my experience they choose their ADs for having the same attitude.
That said, a fascinating video of how to do a great job 👍
@@borassictime918 Rolex have the 'right' to refuse service if you don't abide by their terms, and they do execise that right, because they can. Terms are: you should have your watch serviced by Rolex ONLY... Just like independent service with Apple products voids your warranty, unauthorised parts in a Rolex is a clear sign it has had service done by an unauthorised watchmaker who, beside putting in presumably inferior parts, might or might not have done all sorts of nefarious things to the movement. Therefore Rolex can not guarantee it can bring your watch back to spec. Were it a historically significant, and thus valuable piece, they can agree to restore it for what I can only assume will turn out to be a small fortune. Like with all luxury vintage goods: because you can pay for it, doesn't mean you can afford it to really use it as anything more than a paperweight.
I love this video, thanks for walking us through the journey!
Subtítulos en español por favor!!👍
por favor revisen que ya publiqué subtítulos en español. ¡Disfrutar!
@@richardperrettwatchmaker muchas gracias!!
Happy to relax and see this very interesting video ! I’m always surprise to understand that Rolex do not work on it !! Anyway it’s good for you to work on and restart it as well ! Final assembly is perfect and look good ! Thanks for sharing Mr.Richard and have a good day !!✨👌
Thank you so much Alain! Good to hear from you! Richard
6:18 the proof of the pudding is in these videos, mate! Crack-on, you're awesome and a great role model for us ''WANNA-BES''
Haha! You are too kind Artemus! Richard
Lovely touch at the end Richard….very watchable video. Well done 👍
Nice job, great to watch. I have been watching your vlogs since you started and you actually did a service on my Explorer 39mm some years ago. Being (like yourself) ex military the thing I appreciate the most was your ER section at the end. Bless her heart . I will miss her RIP QEII I have re subscribed. I had forgotten how fascinating and relaxing your tear down and rebuilds are to watch. Almost ASMR :)
I loved everything about this video. I don't even care much about watches. Good man!
You are a very meticulous man that’s quite the most beautiful job of watch rebuilding I’ve ever seen thank you sir. ✨
The shiny-shiny after cleaning reminded me of C-3PO at the end of Star Wars 👍🏾 🖤
I have this exact watch so this is really enjoyable to watch. I am so glad that i got it from a reputable dealer.
I don’t know what audio system your working with but my dogs are hearing the background! That’s rare sound is clear and authentic enough to trick their ears! Good quality equipment!
Your patience and skill at servicing this movement is incredible, it puts me at peace watching the video! 👏
Amazing and totally fascinating. Watched the whole video, from start to finish. Loved the way you joked about your client who could have said more about your skills with working Rolex watches. You missed an opportunity to record your client's words AFTER he received the repaired Rolex watch. THAT would have been much more convincing of your skill level!
Also, it was very interesting to know how the factory Rolex repair division sent the damaged watch back to the owner claiming the watch was a heavily modified Rolex. YOU took on the challenge of working with the damaged watch when even the factory employees didn't want to deal with it. Kudos to you.
Finally, what you found to be THE main problem was a missing jewel. You replaced the missing jewel with a new one. My question is: what happened to the original jewel that fell out of it's place? Why wasn't it found within the watch case? If the jewel fell out, shouldn't it have been contained within the sealed watch case?
Lovely tribute at the end. Thank you.
Very well done Sir Richard.
Thank you so much Tomislav! Richard
I loved the tribute towards the end for Her Majesty, may she rest peacefully. That said, I've seen a few comments saying they liked the tribute to HRH. That's not correct, HRH (Her/His Royal Highness) is given to senior royals, but the Queen/King is Majesty.
*A nice, elegant tribute at the end there, to Her Majesty Queen Elizabeth II. Oh....and a great job on the watch, too. Pub drinkers across Dublin and mariners on the Irish Sea are all relieved, at least for now.*
Very nice! Also liked the calm delivery.
Thank you Bjoern. Very pleased you enjoyed this and thank you for taking a moment to say so. Richard
Great video . . . We now know where to send a second-hand watch for full restoration.
From your video - it seems a good idea to check the movement accuracy and consistancy as part of the buying process.
With cars I used to buy used - then pay for the most comprehensive service from a trusted garage.
Lovely video, Richard and it's good that you seem to know what you are doing...!
Great video and loved the nod to Queen Elizabeth at the end.
Really enjoyed that - as usual! Thanks for sharing.
Thanks so much Chris! Richard
Thank you for your service to England.
You are an Artist.