Flying the Hillbilly FPV 2s Babytooth - Just good old "Fun" flying
HTML-код
- Опубликовано: 10 фев 2025
- Its been a long time since my Crux3 2s splashed into a pond. I do really miss that little quad, but the Hillbilly FPV 2-3s Babytooth is really close to it and one of my new favorites.
This is a little relaxation flight. Nothing fancy, just buzzing around and getting used to it since the quad is new to me.
I wasn't cruising, but still not ripping it up either. I cut the more boring parts out of the video to spare your folks. It was still over a 6 min flight.
Keep flying and do it for "FUN". God Bless You.
Gear For this flight:
Goggles: Skyzone 04L V2 goggle with V3 Module (W ELRS Backpack)
Lumenier Double AXII 2 Long Range Antenna and Lumenier AXII DUO Patch antenna
Radio: Jumper T12 Pro radio, Happymodel ELRS Module.
:KWAD": Hillbilly FPV 3" 2-3s Babytooth Toothpick
FRAME: FPVCycle Babytooth 2mm
FC BOArd: HGLRC Zeus10 AIO FC Betaflight 4.3x w/RPM filters Bluejay ESC firmware - 48mHz PWM frequency
VTX: HGLRC Zeus nano 25/100/200/350mW (had to set betaflight max power to 600 to get the full 350mw from vtx, tested)
VTX ANTENNA: TRu RC Singularity U.FL
MOTORS: FPV Cycle 13mm 6350kv Motors 2.0mm Shaft
CAMERA: Caddx Ant Lite 4:3 FPVCycle Edition (UPDATED: Caddx Ant 16:9)
CANOPY: Bee Brain V2 Camera Mount (UPDATED - HappyModel Crux3 Canopy)
RX: HappyModel ELRS EP1 Receiver
PROPS: Gemfan 3018 Hurricane for 2.0mm shaft (My favorite toothpick prop)
Battery: RDQ 2s 450mah (3 years old)
Extra special thanks to HillbillyFPV for the friendship and the toothpick (this thing is a blast to fly).
Special Thanks to all the following folks for their continued support.:
Hillbilly fpv, / @hillbillyfpv1
Genes RC Addiction, / @genesrcaddiction
Osukaru76, / @osukaru76
I'll Be Droned, / @illbedroned
Stacy Abshire, / @stacemanfpv
Xplicit fpv, / slammedbug
effinchet, / @effinchet6228
Gordon Scott, / @greatscottxs650
I do not own the rights to this music nor am i trying to make any money from this music.
Song: LongTime
Artist: Boston
Album: Boston
Love the low ripping! You're flying with authority, enjoyed the ride and tune!
Happy Thanksgiving brother, God Bless 🙏
Awesome video my friend!! So so glad you are getting some use out of the little fellers. Great tune and thanks a bushel for the shoutout!! Happy Thanks giving brother!!🔥
@hillbillyfpv1 Thank you, brother. I am really having a ton of fun with these picks you built. Many many thanks.
Happy Thanksgiving, and God bless you 🙏
Cool video brother Just found the channel and subbed Happy Flying bro
I’ve said it 100 times, the small quads are just so much fun 😊 happy Thanksgiving you guys 🙏
@GordonScottYankeeEngineer Thank you, brother. It's great to hear from you.
Happy Thanksgiving to you and your family.
Soo agree!
Awesome song choice, watching..
@ILLBEDRONED Thank you, brother. I'm still having a few video issues with this one, but it's a blast to fly. Happy Thanksgiving. God bless you 🙏
Fun lil ripper! Love the 60fps dvr
@Xplicit_fpv Thank you, brother. Yea the 60fps dvr is great 👍. I just need to find the right vtx antenna for this build. There are a few angles that block the signal.
Just discovered your channel. Nice! Interesting you like Crux 3’s. One of my favorites. I have built a Crux3 analog a 1s HDzero and a Crux3 HDzero 2s. The only Crux parts are the frame I guess. Never bought a bnf Crux3. Frames are dirt cheap from China. One my 1s I sometimes use 1 18650 3000mah lion cell and cruise around for 15 or more minutes. Good to find you. Subscribed
@turboomni848 Wow, great to hear from another Crux3 type enthusiast. Sounds like you have some cool ones built. I always wanted to put an 18650 on one, but I just never have got around to it. I might have to get to testing that out. 👍
@@FpvBudgetBuilds Yeah the Crux3 with the 3 inch props really is a sweet spot. I fly my 1s crux3 Hdzero just to see the sights and putter around with a 18650. Sure it's heavier but handles it fine. I see you like the Flywoo Nano baby. I too have one of the early ones with the 16000kv motors. Fresh 450 mah and close to 10 minutes lol.
Nice flying quad. Baby ratel 2 if you want better image -- weight penalty 1.5g but it fits the crux canopy
@PenorBethith yea, for sure, the Caddx Baby Ratel2 is my favorite cam. I just haven't gotten around to putting one on this little ripper yet.