Intel i5-13600KF😱 with RTX4060TI😵
HTML-код
- Опубликовано: 30 сен 2024
- Configuration list
Processor: Intel i5-13600KF
Radiator: Xianma XW360 white fanless version
Memory: ADATA D50W 16G/3600C18*2
Hard drive: Samsung 990Pro IT M.2 NVMe PCIe 4.0
Motherboard: ASUS Tianxuan TX GAMING B760M WIFI
Graphics card: GALAX Star RTX4060Ti 8GDDR6X
Power supply: Xingu GM750W iceberg version
Chassis: TUF GAMING GT502 white ammunition magazine
Chassis fan: West Point Player 3D Fantasy White*10
Accessories: 1700 correction buckle
PSU: Lian Li neon color wire 24Pin+3*8Pin
80 ARGB FAN hub
#pcbuild
#pcbuilder
#pcbuilding
#pcbuild2023
#pcbuildindia
#pcbuildguide
#pcbuildunder10000
#pcbuildshorts
#pcbuildunder40000
#pcbuildingsimulator #pcbuildforvideoediting #pcbuildforstocktrading
#pcbuildinchennai
#pcbuildingsimulator2
#pcbuildin2022
#pcbuilds
#pcbuildunder30k
#pcbuildunder30000
#pcbuildunder40k
#pcbuildwithi3
#pcbuild
#rtx4090
#intel
#corei7
#rtx
#asmr
#corei5
#corei9
#gaming
#gpu
#rtx4070
#rtx4060
#rtx4080
#viral
#short 
Наука
![Cody Johnson - I'm Gonna Love You (with Carrie Underwood) [Official Music Video]](http://i.ytimg.com/vi/yy9PuYMU29g/mqdefault.jpg)
Never trust a guy with Electric Screwdriver
Read my mind. At first I thought he was using a damn impact driver lol but then was like oh shit just an electric screw driver…still wouldn’t use for this. For case screws ok but nothing that’s going on the mother board.
@@RussianCowb0y id still use the only screwdriver in my workspace just not use the battery for the critical pieces.
Unless that electric screwdriver has a torque setting like a torque wrench. I wouldn't trust any without the torque adjust
I think it has a toque setting which means it’s fine if he done it right because it had arrows going up and down which could be to adjust the toque
you can tell on the 4th screw that it is a torque driver. He just skipped the sound on the first 3. The retention bracket was installed correctly.
I will definitely not let this guy build my pc while watching him💀
entonces quieres a un cirujano que te arme la pc como si operara a un perrito bebe?, en fin tu comentario es un puto sin sentido
Jesus I hope those screws on the contact plate are the correct torque.
😂😂😂😂😂
It doesn't look like they are lmao
😂😂😂
What do you mean by torque
@@tino8015what do you mean by torque
Drilling that contact plate like that is very ballsy
What’s a contact plate and what did the guy unscrew when he was installing the cooler ( sorry I’m a pc noob )
@@ActualGenie the frame he installed around the CPU it replaces the stock bracket and gives the CPU better heat distribution on your AIO copper plate and it helps to prevent warping/bending the CPU over long periods of time. the best way to install one is to screw each only a little bit at a time in a star pattern to slowly lower the CPU onto the pins in a more even manner. the way he drilled those screws is very ballsy.
@@boost2223 tysm! R u a pc builder?
@@ActualGenie i build my own pcs yeah, but i don’t build to sell.
@@boost2223who care u are bad
Bro opened 4 slots but only insert 2 sticks 💀💀 (at least it correctly dual-channel)
@@Sugomisbro just did it because its satisfying (its not that deep)
XD
Show
@@Sugomis 99% of consumer grade motherboards dont actually support quad channel; even with 4 sticks the bandwith will still the same as dual channel, because the mobos themselves only have 2 memory channels. Only mobos for servers support quad channel or higher, and in that scenario 4 sticks actually become better than 2.
@@Sugomisага, а если открыть 3 защёлки, то будет 1.5 канальный. Все правильно😂
Bro used 10% of his budget on his gpu
Explain?.. Did he spend like 10k?
@@naniwara8673brotha a 4060 is not 1 grand 😭
@@iansiccama1085 then what does this dude mean? I'm running UHD graphics cuz where I live a 2070 costs 300 bucks
@@naniwara8673here in Mercia 🦅🦅🦅 it cost like 300-400 for a 4060 ti
Guys calm down, the cpu is 250usd, the gpu is 400usd on that build, thats at most a 1000usd build and if it cost 1000usd with only a 4060ti its not balanced for gaming
gotta admit cleanest thermal paste spread ive ever seen
Idk, I'm an engineer and I would slap anyone that applies paste like that
that shit was ass wdym
it looks nice but when you place down the AIO the pressure from it creates air bubbles
@@antonioarellano7744its gonna be fine on the first heat up
It was definitely smooth, but that’s not good for it at all, CPU’s heat up especially playing games, & if that spreads which it most likely will, it’ll become bubbly & also probably leak into the motherboard.
Her: he's probably put cheating right now
Me building a $9000 pc just cuz I'm bored:
Just came here to say that thermal paste placement was mint.
Fr
@@xgitgudx4137tbh he would be fine if he even used half of that. Trust me
@@xgitgudx4137 the thinner the better. It put the hot part with the one who will chill. You dont want to isolate both.
Meh tbh
Yeah i worry for that too
It’s crazy how none of these nerds know that those electric tools can be set to certain torque levels giving you an even amount of pressure.
People is just stupid 🤣
Assuming the comments comes only from people who built their PC with their own hands from scratch is crazy. See all these comments. I make a bey that not even 10%.
Ok
people are just stupid*@@BaMbOoZeD
Full torqing one side first may lead to uneven pressure wich can cause damage
He could get a 4080 if he chose normal parts theme
Aren't there 4080's in white
@@Truck-kun_01the price
Im currently playing around with pc builders locally and white parts are literally the same price or even cheaper except the RAMs and CPU coolers(they have a ridiculous price here)
@@Truck-kun_01they’re at least 200 ish more at least where I’m at which is insane like 20%…
@@steffjones0592 where I'm at they're like $10 more, in my currency that is which is still above $1000
Ah yes, the classic "spend $500 on aesthetics over actual performance" PC
@Aayush_drawsI have the one with 16gb of vram and works just fine. Not sure how the other models are tho
tiene un gran rendimiento igual, cada quien gasta en estetica lo que quiera
@@PEguinQuAcKers16 gig model is stupid, since most games cant even use all that VRAM, and for some reason it still only runs with a lower bus than the 3060/3060ti. Tests have shown that both 4060 and 4060ti, no matter how much VRAM, are less powerful than the 3060 and 3060ti, because the 30 series cards have a much bigger memory bus. Feels like nvidia is scamming their buyers.
you should use an impact wrench on the cpu frame to properly secure it
😂❤, exactly, don't you hate when you don't and the cpu escapes? 😂
Dude just used a fucking impact drill to install his cpu 💀💀💀
That Spatula is the most important piece.
That thermal spread was fucking beautiful!
дрель бы взял еще
лучше перфоратор.
@@gorgorich5463 спасибо
В почему бы не закрутить двух метровой арматурой ?
Перфоратор лучше
Лучше Хаммер
Go for performance not asthetics
Bro overspent on everything except his gpu….
mq
If he used normal parts he could get 7900 xtx with 5 7500f (But this build Isn't even for Gaming so it doesnt really matter)
Finally some ASMR you can get behind
Если бы, со мной дружил дьявол то у меня тоже был бы такой пк😢
Nice Case! ❤
Asus tuf gt502 thank me later
@@vedithing_2get the h9 flow instead, its literally better in every way
Or the h6 flow
Dude, stop it with that electric screwdriver on the contact frame and the waterblock
on the frame you have to slowly screw each screw at the same time or half a turn on every screw in a cross pattern until they are all tight (which hopefully happens about at the same time for them all)
same for the waterblock on the CPU, but less extreme
a instead of half a turn, you can do like 2 turns
I know this is much slower and annoying
but unless you have 4 electric torque screwdrivers you can use at the same time
it's the only real option
This is so pretty bro what mb is that
I just did some searching, its probably ASUS TX GAMING B760M WIFI D4
@@kurotaL61200 tyty
4060ti have same price as rx 7700xt
4060ti have no sense to buy
This is satisfying, I thought I was gonna bust 😫
Bro i build this pc in my PC creator 2 game😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂
Для Samsung 990 pro лучше использовать радиатор кастомный, с активным охлаждением ещё лучше, ну и наклейку снять не забывай!
Поверхность подошвы водоблока после снятия наклейки лучшее очистить от клея любым спиртом, это не обязательно но желательно, дотошность - признак хорошего мастера
Затягивать водоблок нужно обязательно крест на крест и болты по одному обороту чтоб распределение термопасты было максимально правильное
😮
Ssd water block? Do you mean heat sync
@@jadencantread возможно это не точности перевода, но я имел ввиду cpu водоблок, его винты необходимо затягивать в определенном порядке по диагонали и по одному обороту для каждого винта за раз
Не нужно снимать наклейку с ССД. Разница будет максимум в 1-2 градуса, а гарантия в большинстве случаев будет утеряна.
@@RapisurazuriOr гарантия от съёма наклейки не теряется, разница в 1-2 градуса будет при плохом охлаждении, при хорошем разница будет в 5-6 градусов, например мой 990pro на 2tb греется не выше 40 градусов, что несомненно продлит ему срок службы и не придется обращаться по гарантии ;)
Tell me you’re a clown without telling me
Jesus the amount of thermal paste and how it’s applied crushes me… that thing is gonna over heat no problem
Can you give me a free i5 =6th gen processor plzz
M-atx mobo into atx case... 😂
i see no problem there
@@johndoe7766yes there is a problem there...the Motherboard is a m-atx size and the case is capable of normal atx motherboards... So... That left space is causing the overall look of pc to bad looking
Che schifo una rtx 4060 ti la peggiore scheda video realizzata da nvidea.
Ready to play Minesweeper!
A toda la critica digo no? Pregunto se puede armar esa compu o son al azar todo? Saben como se llama cada componente y cuanto sale armar uno igual??
Matx board in an atx case is an unforgivable sin
so schmol 🥺🥺
So lazy with that screwdriver
No, you took away the anime waifu cpu case. Awesome video but that part hurt.
Bruh
Get back to reality bro , stop this gross nonsense anime waifu thing , it kills your soul , trust me , better for yourself😉
I would’ve downgraded the CPU to get a better GPU
The cpu is total overkill for this build
I would literally kill for a PC like this
And yet mines still stronger
@@hmmidk6023 what is ur pc build
Thats a budget pc ma guy, not even a midrange
@@cruelson9072 Im rocking a 1050 and an I5 2400
@Frosted21 nice, im rocking a i7 7th gen gtx1050 laptop and a i9 12900k rtx 4070 xD
I Have Intel Core I7 😎😎😎, but old video-card.
Show me the back of your pc
Show me the cables
An mATX board in an ATX case... _Ouch!_
UaUu
Dude spent $2000 for $700 worth of performance...
Ikr
I have the same computer (hardware etc.)😊
gg
Can i get this pc for free? plz
Not very good combo of cpu gpu
il ne faut pas retirer l'étiquette du ssd si il est refroidi ?
I've never heard of that Motherboard company and I've been building PCs for 20 years lol.
Your skill looks terrible... You actually installed the CPU first and then released the securing latch next to it. That's a terrible order of operations.
No le quitaste la etiqueta al SSD m2
Hello what's the name for the black thing entouring the CPU pls ?
what is the case name?
I wanna upgrade to a 4060ti from a 3060ti. Do I need to also upgrade my cpu?
Oh man. I would be pretty upset with the parts Install. The thermal paste application was shit and you should never use an electric screwdriver in a pc! This guy shouldn't be working on pcs.
Dont install contact frame like that, watch gamers nexus video how it has to be done if you don't want your cpu to bend
finally something other than i9 14900k and 4090😭😭
He has SOME balls to make a PC with intel 13th gen, Samsung 980 and a 4060 Ti at this time
난 램 꽂는 소리가 제일 좋드라.
I'd never go that premium with the cooler on a GPU that low spec 💀 talk about money wise spending
Stop shorts😢
CPU and GPU Bottlenecks: I guess you wonder where I've been.
That paste application 😅 no wonder you need a water cooler.
Forget the torque, no chance that cpu is making even contact like that with the contact pins or the cooler. Never just slam them down one corner at a time like that, go little by little on each screw so the frame/cooler lower down as flat as possible. Not the end of the world in most cases but definitely not ideal
5к лайков, и он дарит мне этот пк 😢
My pc is i5-14600KF and GEFORCE RTX 4060Ti lol
Just me or is anyone else wincing at the use of a power tool?
Really, 4060ti with 13600k!
Are you sure about that?
NRF MGRS🎉
Why does everyone spin the fans? Are you showing us what they do? We know... be original!
Not mounting the cooler first before putting it in the case is blasphemy
Bro I dont understand... Why would people choose KF Cpu😢
China.
amaxing
Is amd ryzen 9 with rtx 4070 ti or 4060 ti for 1.300 a good price
i was expecting a goofy ahh music at the end of the video, like every other pc build short
Yes
No
Oooo your first mistake...... the 13900k..... and 2nd just use the tried and true X paste application.
Yk how when u spun the gpu fans? Doesnt that generate electricity? :]
Безтолково. Такі ПК тільки щоб мавп в зоопарку дивувати... Підсвіткою... 😅
good build. im kinda sad when i see high end i7 or i9 chips with budget gpus.
I7 13F with 4060 ti 16gb is one?
4060 ain’t budget
It’s low tier but not budget
@@Icequake. a, ok
My computer is
CPU: Intel Xeon Scalable Gold 6336Y (2EA)
M/B: SUPERMICRO MBD-X12PI-NT
RAM: SAMSUNG DDR4-3200 ECC/REG 768GB(64Gx12)
SSD: SAMSUNG 980 PRO M.2 NVMe 2TB
VGA: NVIDIA H100 80GB PCIE (4EA)
CASE: 4U RACK Type Rail KIT
POWER: 2000W PLATINIM + 1000W GOLD
Water Cooling Parts: 1U LGA 4189(2EA), NVIDIA H100 Block(4EA),
30T Radiator (2EA), All in one Pump, EPDM Clamp, EPDM, Quick Disconnect
얼만교?❤
I Like That Main So Much BC Have Anime Girl 😂
Why the fu** would you need to change the CPU guard? What does that do for you? 🤬
Why the fuck are you using an ELECTRIC screwdriver for screws that all have to be the SAME torque??????🤦♂️🤦♂️
Hahahahahahahhashhah. The most terrible selection. Hello, are you clowns?
Why is watercooler is installed in a way to block memory slots?
Why are folks investing in 13th and 14th gen Intel knowing they have ISSUES? Just use 12th gen, even on newer builds until Intel resolves those issues with 13th and 14th gen CPUs then upgrade. Stop wasting your money folks, 13th and 14th gen CPUs are not worth it.
Bro I am You're Subscribers pls Giveaway me a Gaming Computer Setup Pls. 😢😢😢😢
I come from a poor family 👨👩👧 give me a PC to play GTA online . Russia Khanty-Mansiysk Autonomous Okrug Nizhnevartovsk city
Every electronic component should be hand tightening, 🤦🏼♂️🤦🏼♂️🤦🏼♂️ plus you can't never spin the fans like that, it could do permanent damage to your equipment, this noobss now a days
if i use the first m2 slot at my Asus z690 Strix F which is controlled by Cpu and shares lanes (8x/8x) with the PciE 16x slot then i have occasional stutters in w11 and games. if i use one of the 3 other m2 slots for my 970 Evo boot and 980 Pro game drive which are controlled by the z690 chipset there are no stutters. hm..
i cant come over the fact of the customer using a 4060ti. Blud, a 4070 costs the SAME! ik, ik, this video was released before the super cards but still, back then it would have only been like 50 more dollars, and absolutely worth it. but ok, if you dont know anything or just love bad Price to Performance GPUs, then this is a good build... xd
Bu gpu ve cpu darboğaz yapar mı? Does this gpu and cpu have bottleneck?
Here is a fun fact: You would get better performance with a 3060ti, since it has a much bigger memory bus and comes with 12 gigs of VRAM, which is more than enough and could have saved you a few hundred bucks. And that case you chose has no airflow at all, which will be bad for the GPU. Just some small tips for next time 😅