Hi Brandon, the 'hair like stuff" like you call it are some carbonfiberstrands I cut into fine pieces...I use it to fill the gap up with some epoxy... you can compare it to applying bondo but in that case it's a thickened epoxy with carbon fiber ;) the hybrid (Carbon/Kevlar) is something you should be able to buy on most online composite-shops and so on. You can use regular epoxy for the blade (thats what I did ;) )
pretty sweet, what did you use to reinforce it? I have just made a homemade hockey blade and i attached it on with carbon fiber but do I have to use something to re enforce it?
HI there, loved the video! I got a couple question if you could answer that would be great! -What kind of apoxie did you use? -How and where did you get the fiber - glace shavings? -What grit of sandpaper -What is the patch you put at the end? (carbon and Kevlar) and what patch do you put on top of that one ?
Hi Matthieu, what was the black hair like stuff you applied on the hockey blade at 4:18 ? Also where do you get the "hybrid" from at 6:38. Can I just use regular epoxy for the blade? Thanks
I reinforced it with Carbonfiber, Hybrid Carbon/Kevlar and some chopped CF... all of this with Epoxyresin those should be the strongest materials to use to reinforce it...
The epoxy you use might have a little bit of influence on the behaviour, It might be better to have an epoxy that has a little bit of flex into it...you should ask your local shop whats best...I work with a brand I'm quit happy about giving me some good results...It would be some trial and error to get it perfect but any epoxy resin should do the trick
Hi for your 2 wood stick, Did you put something special on it? Some beewax or something like that? Because I try to do the same think and it’s glued with the blade! Lolll
дааа ребята , так клюшки не ремонтируют. после такого ремонта в лучшем случае по теннисному мячу можно будет бить)) надо обязательно использовать карбоновую трубу
Excellent repair. Can you share the type of epoxy (brand name) you recommend? I’d like specific details to make sure I buy the right kind.
Thanks
Hi Brandon, the 'hair like stuff" like you call it are some carbonfiberstrands I cut into fine pieces...I use it to fill the gap up with some epoxy... you can compare it to applying bondo but in that case it's a thickened epoxy with carbon fiber ;) the hybrid (Carbon/Kevlar) is something you should be able to buy on most online composite-shops and so on. You can use regular epoxy for the blade (thats what I did ;) )
pretty sweet, what did you use to reinforce it? I have just made a homemade hockey blade and i attached it on with carbon fiber but do I have to use something to re enforce it?
HI there, loved the video! I got a couple question if you could answer that would be great!
-What kind of apoxie did you use?
-How and where did you get the fiber - glace shavings?
-What grit of sandpaper
-What is the patch you put at the end? (carbon and Kevlar) and what patch do you put on top of that one ?
What is the black cloth-like piece that covers the carbon/kevlar piece?
Hi Matthieu, what was the black hair like stuff you applied on the hockey blade at 4:18 ? Also where do you get the "hybrid" from at 6:38. Can I just use regular epoxy for the blade? Thanks
Est-ce-que tu aurais un lien pour chacun des produits à acheter stp? Parceque j'y connais rien niveau carbon et epoxy.. Merci
Hi, the red tape is it normal electrical tape?
Are those shin guards for hockey or football?
I reinforced it with Carbonfiber, Hybrid Carbon/Kevlar and some chopped CF... all of this with Epoxyresin those should be the strongest materials to use to reinforce it...
What the name of the glue you used
What is the stuff called that u clean the stick with?
Nice video. Thanks for sharing.
Does it matter what epoxy resins you use?
The epoxy you use might have a little bit of influence on the behaviour, It might be better to have an epoxy that has a little bit of flex into it...you should ask your local shop whats best...I work with a brand I'm quit happy about giving me some good results...It would be some trial and error to get it perfect but any epoxy resin should do the trick
so wait ur putting tape right over wet epoxy?
Yes to apply extra pressure
Hi for your 2 wood stick, Did you put something special on it? Some beewax or something like that?
Because I try to do the same think and it’s glued with the blade! Lolll
Good video ! It was helpful
дааа ребята , так клюшки не ремонтируют. после такого ремонта в лучшем случае по теннисному мячу можно будет бить)) надо обязательно использовать карбоновую трубу
Correct, nothing special on the tape :)
Are you Finnish your accent reminds me of the dudesons
Haha, English isn't my native language, I speak Flemish/Dutch and French :) I'm from Belgium
Okay, thank you. Hopefully my stick works haha
Good deal#
Correct, nothing special on the tape :)