@@yurizanelli6538 Almost all known curved longswords evolved from Turkic kilij of Asia including shamshir, sabre etc. They are ideal for horsed warriors, not for footsoldiers.
As a teen I was visiting Switzerland and went to a historical war museum. There were different sabers behind an acrylic glass plate but open on the top and bottom. One 300+ year old parade saber was longer than all the others and the tip stuck out on the bottom. I touched the edge because I thought there's no way this thing is still sharp. Yeah I immediately cut my finger... Absolutely incredible
And I know you were a teenager, but that whole idea about kids not having common sense is too true 😂 Of course a 300+ year old sword at the MUSEUM (the place that goes out of its way to keep historical artifacts in top condition) would still be sharp, and they’re really gonna be sharper than ancient swords ANYWHERE else 😂😂😂
Yeah probably Skalls application to be the next great Forged In Fire Guest host or Judge should they decide to do another one those or something like that
@@Skallagrim ... or a below-average tourist in Iceland. The number of them that have been spotted on livestreams, walking on the still-warm lava flows while the eruption is ongoing ... 😟
@@Skallagrim Saw a couple and (presumably) their 5 or 6 year old child there once walking around down on the black rocks. People yelling at them to get back up toward the shore but they either didn't hear, understand, or care. Absolutely terrifying to see.
@@Skallagrim I always assume I've hurt myself for a second when something unexpected happens and I'm using a saw or blade, so some projection is probably happening here. Loved the video!
My ancestors all grimace, as they were all slaughtered by Persians with curvy swords. Not really. My ancestors is all deadbeats, horse thieves, horsebeats, dead thieves and even a few alcoholics.
Good review, Skallagrim. That sort of sword is seldom seen and surprising how good it is even compared to the other katanas you tested. Also very agile, surprising. Those old warriors knew what worked.
A comment just for the sake of the algorithm: seems to be a really nice sword, and I am happy to see you in much better shape both physically as mentally!
I have tested over a dozen swords by LK Chen of different swordmaking cultures. Hands down it is one of the best reproduction sword maker in the world right now, in terms of faithfulness to the originals, the liveliness of the handling, and the cutting performance. Basically one par with Albion, except the fit and finish are slightly trailing behind some of the best makers that charges 3-5 times the prices of Lk Chen. Don't get me wrong, LK Chen swords' fit and finish are still better than 90% of the reproduction makers out there, even it's not necessarily on par with Albion. On some of the models, such as the Knight Templar arming sword they made for Balaur Arms, it's basically shoulder to shoulder with Albion. I'm very excited to try out this Persian shamshir based on two originals housed at Metropolitan Museum.
@@Rob_Fordd That's true. But I wouldn't describe this as merely "decent". It's top of the line in terms of faithfulness to the originals, handling and performance. You will need to get this close by spending 4000-5000 USD previously by going to renowned makers like Vince Evans for full custom commissions.
Yeah, LK Chen is great, but the fit & finish and quality control can't compete with Albion. Unsurprising, considering that those swords cost half as much, or in some cases even a quarter.
@@FortuneFavoursTheBold Oh you misunderstood me, I should have used a better word. I meant you can now get good swords from china from 80-100 dollar level, to this, to custom multi thousand dollar blades of flawless fit and finish that would still be several times as much elsewhere.
@@Rob_Fordd Yeah I think you are bang-on. If one is willing to do the due diligence, he can pick up swords or sword components that's absolutely punching above their weight class from Chinese manufacturers.
@@StallionStudios1234 No, those were more historically inaccurate/fantasy-based scimitars. However, that type of sword is still based off the real life Shamshir. As a matter of fact, the word "scimitar" is a corruption/mispronunciation of the word "shamshir".
the most popular weapons in middle eastern history is actually the mace with a variety of styles and functions. swords often get over represented as historical weapons due to presentation in fantasy fictions. the mace is an incredible weapon. versatile against different types and layers of armor. easy to handle and doesn't require a professional degree of skill through training or experience. levies can use immediately coming out from the farm fields into the battlefields. extremely deadly and horrifying if wielded en masse. batter through anything. nothing scarier than a formation of heavy libyan infantry wielding maces. they make excellent secondary weapons as they require less maintenance, handling and care. even the mamluks who favored curved swords on saddle always had a secondary mace for armored problems.
I love the sheer surprise and joy on your face after that first cut and it got clean through. That testing session alone says everything about the blade itself at least.
The alternative is to have a much broader sheath than the blade. It's the only way for flamed blades, but was occasionally done with single-curved blades as well.
You have no history. You knights and all your steel and arms are nothing but shameful rip offs of our glorious Pahlawans and their divine Karenian Steel and Armor.
Not gonna lie, seeing you on those rocks was a little anxiety inducing. I'm sure you wouldn't fall, but I was just waiting for the sword to slip out of your hand or the scabbard to slide off. XD Great review, Skall! Good advice about the lead leg.
A funny fact about the Shamshir, Jose de San Martin, Liberator of half of South America wielded one during his military campaigns against the Spanish, he acquired it from an antique shop in London before sailing to Buenos Aires.
When you were talking about fit and finish I was reminded that medieval standards were wayyyyyyy below ours. What was acceptable to them wouldn't be acceptable today. Large gaps and uneven tapers were quite common. Good vid. Thanks!
Hey circle people did try to make the best swords they could and they were very good at it but they did not have unflinching unerring CNC machines that are accurate to the hundredth of degree and thousands of an inch and cut with a nanometer Perfect laser.
@@brianmead7556 I know some of the best knife makers in the world and they don't use CNC. All hand tools so ya it is possible with care and time. The ancients made the Antakatheria mechanism using hand tools. Its an analog computer. So they very well did have the ability to do it.
As a lover of the FE Shamshir with its light weight, 35% base crit chance, and Myrmidon-type class exclusivity, it was nice to see such a positive review and practical demonstration of the real-life iteration of my favorite sword in all of Fire Emblem. Great video, Skall!
Arabian sword and script are influences muslim world. Mongolian and Turkish sword, Japanese sword, and Indian sword Khanda(not Delhi to Mughal influences sword in Muslim rule period of India)
He is absolutely correct, when talking about hitting yourself in the lead leg. Every tennis player has done this while serving at the start of a point. It doesn’t happen often, but it will happen. Always be mindful of where your blade will end up after a strike.
“We’re not getting into sword fights “. I do about that one , I swear every month I see something from Twitter of people having a sword and or knife fight in England . It’s wild out there
It looks very similar to the Sword of San Martin. National hero of Argentina. As far as I know, He bought the sword in London around 1811. It was made with a rather old persian blade but with a more modern hilt (for the early XIX century).
I’ve always been deeply fascinated by this sword after first seeing it ages ago in Soulcalibur II. Such an elegant yet powerful sword. Thank you for covering this, Skall. You truly are the GOAT.
skall i just want to say, out of the sword community on youtube, to this day you probabbly do some of the best reviews, it's no bullshit, it's honest, you only work with good people, and I believe that's why to this day multiple companies have reached out to you for reviews sending you products. Please keep up the good work you are literally the entire reason I transitioned from my 13 year old katana weeb phase to a proper appreciator of all swords and historical accuracy.
7:50 fun fact : the shield used to counter the samsir was a "soft" leather shield, able to disperse the impact. It was also waaaay bigger than a lot of european shields, especially on the sides, because this sword is able to "flank" a small shield. Please apologise my awful english, but i hope it's obvious that a trust attack is not a straight one, the curve allows you to hit a target who parry too close to the guard. there is a big con, however : this sword is almost unable to deal with armored foes. The classic persian armor was a chain mail, with only one plate to protect the chest. This can explain the early succes of crusades. So, the european sword was also used, and were researched by wealthy peoples, because a) the blunt impact was more important and no chainmail can avoid the break of a limb b ) this sword was more able to dispose of the "soft" leather shield c ) the steel was a better quality one, (damascus steel was bad quality indian steel) and this added to the geometry of the blade allowed the european sword to broke samsirs this is true in medieval era, but later, during the war between ottoman empire and european ones, this samsir proved to be far better than the straight trusting sword in this context.
I have one of these. Beautiful, well made etc but came from the factory with a completely non apexed edge. LK Chen is my favorite sword company but this was a major oversight. Took a lot of power to cut a soft plastic water bottle before I realized what the problem was.
To your point about the beautiful edge retention despite the thin nature of the edge geometry, good modern steels with *excellent* heat treatment are truly incredible compared to just about anything we had access to in the past. The problem is that very few modern production swords are actually used enough to place market pressure on manufacturers to pursue excellence in that realm. Delighted to see your video, as always.
Hey @Skallagrim, you've been popping up in my algorithm more and more recently.... and I've been missing you for years. So whatever you've done recently has driven you to the top. Keep it up!
Always happy to see a new Skall video! This one was fascinating to me as I’ve always been curious how effective this type of blade is. Glad for his presentation.
We have a few in our museums in my home country of Bosnia & Herzegowina . We have the original Damascus steel shamshir sabers with customized engravings for the rulers . They look like a piece of art , which is representing a lost tradition of forging .
Those mats can absorb moisture and have dirt build up over time, affecting its texture. Conversely, if it see too much sun, it will dry out and turn brittle Either way it affects the texture/consistency. Just another variable to account for.
That remotely-manoeuvred camera is rad! :D The shamshir, even more so! It's gorgeous! Unclear bas-relief is something I easily forgive, especially considering the properties of the sword, which seems stellar!
Screws And Tools just did a restoration on a very similar sword. The guard was so rusted and cruddy he had to make a new one. He didn’t take all the pits out of the blade because it would have ended up too thin and didn’t even sharpen it. It still cut cleanly through large squash. Shamshirs are monsters no matter how old they are. Clean review, clean looking sword. Might have to save up my shekels for one because who doesn’t like a curved sword?
"You see those warriors from Hammerfell? They've got curved swords. Curved. Swords."
GAH beat me to it
*Perfect Timing* 👏😅
do you work for bethesda ? When is ES6 coming ?
you beat me to it lol
@@Scout887 About 5 years before the "Game of the Year" edition incorporating all the fan-made bugfixes.
Therepist: "Medieval goth Heisenberg isn't real he can't hurt you"
Medieval Goth Heisenberg:
But what if I want him to hurt me?
@@obnoxiouspriest Well that may be the reason there's a therapist in the story to begin with xD
He’s real and he has a sword
"Jesse, we need to cut!"
@@apickleleaningonacomputerm8045 I was actually thinking of the RE Heisenberg but uh, no that one works too
I have been successfully guilt-tripped into leaving a like. Well done.
As it and you should.
I wasn't. I left a like because I liked it!
Ditto. May it please the mighty Al-Goryth-Um.
Me too
And it only took being threatened with possibly the best single-handed cutting swords he's tested
Out of all the sword designs, the shamshir has always been the perfect combo of function and beauty to me.
Turkish Kiliç are also great in my opinion.
Swiss sabre?
Yup, one of my favourite sword designs. It's beautiful and very comfortable to grip
i especially like the sheathed look on the swords.
@@yurizanelli6538 Almost all known curved longswords evolved from Turkic kilij of Asia including shamshir, sabre etc. They are ideal for horsed warriors, not for footsoldiers.
As a teen I was visiting Switzerland and went to a historical war museum. There were different sabers behind an acrylic glass plate but open on the top and bottom. One 300+ year old parade saber was longer than all the others and the tip stuck out on the bottom. I touched the edge because I thought there's no way this thing is still sharp. Yeah I immediately cut my finger... Absolutely incredible
And I know you were a teenager, but that whole idea about kids not having common sense is too true 😂 Of course a 300+ year old sword at the MUSEUM (the place that goes out of its way to keep historical artifacts in top condition) would still be sharp, and they’re really gonna be sharper than ancient swords ANYWHERE else 😂😂😂
Still sharp?! But no more than a broken heirloom
That sword was broken
Very cool and very stupid.
The shards of narsil, the sword that cut the ring from saurons hand. Still sharp -.-
SKALLS FOR THE SKALLTHRONE
BLOOD FOR THE THE SKALLGORITHUM
KHORNE CARES NOT FROM WHENCE THE BLOOD QUELLS!!! BLOOD FOR THE ALGORITHM, SKALLS FOR THE SKALL THRONE!!!
I smell heresy 🤨
@@Trrip000 Skall is an officially recognized Imperial Saint..So move along citizen.
The Emperor protects.
SKALL RULES SKALL UNITES SKALL WILL CONQUER WE SKALL WE ARE SKALL
I watched entirely because of the joke in the thumbnail. IT WILL CUT. Thank you for the laughs and great analysis.
I’m pretty sure that sword was Forged in Fire!
But will it KYEAL ?
Yeah probably Skalls application to be the next great Forged In Fire Guest host or Judge should they decide to do another one those or something like that
will it Keel though?
I love how it's both beautiful AND functional. Always lovely when you get something that's just as effective as it is pretty.
And affordable
You stayed off the black rocks: You did the safe thing. Good job!
Blackpilled rockmaxxer 💀
Yeah, I may be a little reckless sometimes, but I'm not your average tourist at Peggy's Cove. :D
@@Skallagrim ... or a below-average tourist in Iceland. The number of them that have been spotted on livestreams, walking on the still-warm lava flows while the eruption is ongoing ... 😟
@@Skallagrim Saw a couple and (presumably) their 5 or 6 year old child there once walking around down on the black rocks. People yelling at them to get back up toward the shore but they either didn't hear, understand, or care. Absolutely terrifying to see.
@@halwakka504People who doesn't know always know better 🤷♂️
6:10 Love how confused Skall is when the blade hit tatami roll on the ground.
"Oh, crap my le- wait, my leg is where it's supposed to be..." glance down "Oh, thank the gods there's a mat chunk there."
@@dahken417 It was "oh crap, I hit the grou... wait, did I?". My leg was nowhere near it. :)
@@Skallagrim I always assume I've hurt myself for a second when something unexpected happens and I'm using a saw or blade, so some projection is probably happening here. Loved the video!
I really appreciate the review, Skall.
I've been watching since 2015 and these videos just get better and better :)
Yeah that is around the time I started watching him as well. That was back when I lived in Alberta.
Wonderful glamor shot at the beginning.
I can feel my persian ancestors smile Every time skall does a shamahir review ! Thanks :D
My ancestors all grimace, as they were all slaughtered by Persians with curvy swords.
Not really. My ancestors is all deadbeats, horse thieves, horsebeats, dead thieves and even a few alcoholics.
@mattw7949 sorry to hear that mate , were are you from ?
that's an arabian sword, not persian, persians copied it from arabs
@@emotionalvideos6897 cry arab
@@emotionalvideos6897 suuure buddy , why so insecure and aggressive ?😂
Good review, Skallagrim. That sort of sword is seldom seen and surprising how good it is even compared to the other katanas you tested. Also very agile, surprising.
Those old warriors knew what worked.
A comment just for the sake of the algorithm: seems to be a really nice sword, and I am happy to see you in much better shape both physically as mentally!
I have tested over a dozen swords by LK Chen of different swordmaking cultures. Hands down it is one of the best reproduction sword maker in the world right now, in terms of faithfulness to the originals, the liveliness of the handling, and the cutting performance. Basically one par with Albion, except the fit and finish are slightly trailing behind some of the best makers that charges 3-5 times the prices of Lk Chen. Don't get me wrong, LK Chen swords' fit and finish are still better than 90% of the reproduction makers out there, even it's not necessarily on par with Albion. On some of the models, such as the Knight Templar arming sword they made for Balaur Arms, it's basically shoulder to shoulder with Albion.
I'm very excited to try out this Persian shamshir based on two originals housed at Metropolitan Museum.
It's been amazing seeing sword production quality from china really mature in the last decade. You can get decent stuff of any level/price now.
@@Rob_Fordd That's true. But I wouldn't describe this as merely "decent". It's top of the line in terms of faithfulness to the originals, handling and performance. You will need to get this close by spending 4000-5000 USD previously by going to renowned makers like Vince Evans for full custom commissions.
Yeah, LK Chen is great, but the fit & finish and quality control can't compete with Albion. Unsurprising, considering that those swords cost half as much, or in some cases even a quarter.
@@FortuneFavoursTheBold Oh you misunderstood me, I should have used a better word. I meant you can now get good swords from china from 80-100 dollar level, to this, to custom multi thousand dollar blades of flawless fit and finish that would still be several times as much elsewhere.
@@Rob_Fordd Yeah I think you are bang-on. If one is willing to do the due diligence, he can pick up swords or sword components that's absolutely punching above their weight class from Chinese manufacturers.
I normally never comment but I love the energy in this video. Light, pleasant, positive. Keep it up :)
The Shamshir is my favorite curved sword. Glad you enjoyed using it!
Shamshirs are gorgeous swords. Happy to see you test one .
Is this what Aladdin used in those movies?
@@StallionStudios1234 No, those were more historically inaccurate/fantasy-based scimitars. However, that type of sword is still based off the real life Shamshir. As a matter of fact, the word "scimitar" is a corruption/mispronunciation of the word "shamshir".
the most popular weapons in middle eastern history is actually the mace with a variety of styles and functions. swords often get over represented as historical weapons due to presentation in fantasy fictions. the mace is an incredible weapon. versatile against different types and layers of armor. easy to handle and doesn't require a professional degree of skill through training or experience. levies can use immediately coming out from the farm fields into the battlefields. extremely deadly and horrifying if wielded en masse. batter through anything. nothing scarier than a formation of heavy libyan infantry wielding maces. they make excellent secondary weapons as they require less maintenance, handling and care. even the mamluks who favored curved swords on saddle always had a secondary mace for armored problems.
I love the sheer surprise and joy on your face after that first cut and it got clean through. That testing session alone says everything about the blade itself at least.
Standing on the edge of the cliff, having the sea behind you and threatening me with that sword actually made me leave a like. 😭👍
goth hipster pirate
For the first time in my life, I allowed a creator to talk me into leaving a like because... that IS a really epic background! Well played!
Really glad Skall is still dropping these vids. One of the few creators I still get excited to see after all these years. Appreciate you buddy!
Thanks!
that background was definitively worth it 👌
10:05 thats pretty cool. I always wondered how a sheath for such a strongly curved blade would work
The alternative is to have a much broader sheath than the blade. It's the only way for flamed blades, but was occasionally done with single-curved blades as well.
The sand bros really had some fine craftsmanship
You have no history. You knights and all your steel and arms are nothing but shameful rip offs of our glorious Pahlawans and their divine Karenian Steel and Armor.
Thanks, bro. I can confirm that our camels craft our curved swords.
Not gonna lie, seeing you on those rocks was a little anxiety inducing.
I'm sure you wouldn't fall, but I was just waiting for the sword to slip out of your hand or the scabbard to slide off. XD
Great review, Skall! Good advice about the lead leg.
"Katana has a curved blade making it the ultimate cutting tool."
Shamshir: "Hold my čāy"
Another great presentation. I appreciate your time and effort.
These in depth reviews never get old 😄
A funny fact about the Shamshir, Jose de San Martin, Liberator of half of South America wielded one during his military campaigns against the Spanish, he acquired it from an antique shop in London before sailing to Buenos Aires.
Liberation from who
What was he doing in London?
@@ahmedelkhwaga2751from spain
That's very cool
As a Persian i didn't know about this
Very nice video thanks ❤
When you were talking about fit and finish I was reminded that medieval standards were wayyyyyyy below ours. What was acceptable to them wouldn't be acceptable today. Large gaps and uneven tapers were quite common. Good vid. Thanks!
Hey circle people did try to make the best swords they could and they were very good at it but they did not have unflinching unerring CNC machines that are accurate to the hundredth of degree and thousands of an inch and cut with a nanometer Perfect laser.
@@brianmead7556 I know some of the best knife makers in the world and they don't use CNC. All hand tools so ya it is possible with care and time. The ancients made the Antakatheria mechanism using hand tools. Its an analog computer. So they very well did have the ability to do it.
Dude... you looked like a badass in this vid! 👍🏼😎
a pussy magnet for sure xD
As a lover of the FE Shamshir with its light weight, 35% base crit chance, and Myrmidon-type class exclusivity, it was nice to see such a positive review and practical demonstration of the real-life iteration of my favorite sword in all of Fire Emblem. Great video, Skall!
Arabian sword and script are influences muslim world. Mongolian and Turkish sword, Japanese sword, and Indian sword Khanda(not Delhi to Mughal influences sword in Muslim rule period of India)
Always love weapon reviews. Thanks for this.
That blade in motion was pleasure to watch. And the cutting, very nice.
incredibly beautiful view!
Holy heck the quality on the camera game for this video is absolutely stellar
Thanks for the great review and epic background. That sword is very beautiful too.
He is absolutely correct, when talking about hitting yourself in the lead leg. Every tennis player has done this while serving at the start of a point. It doesn’t happen often, but it will happen. Always be mindful of where your blade will end up after a strike.
And a sword does a "little" more damage than a tennis racket. Same basic principle though.
i must say, these are the most satisfying cuts i've ever seen
Thank you for the beautiful background shots. I'm just living in a barren wasteland of AZ so seeing such a different landscape is nice.
Finally got a recomendation!! And its a review!! YEAH BUDDY
Thank you for the slow sheathing at the end, it showed off how the scabbard is modified to account for the intense curvature.
“We’re not getting into sword fights “. I do about that one , I swear every month I see something from Twitter of people having a sword and or knife fight in England . It’s wild out there
It looks very similar to the Sword of San Martin. National hero of Argentina. As far as I know, He bought the sword in London around 1811. It was made with a rather old persian blade but with a more modern hilt (for the early XIX century).
One of my favorite types of sword
I’ve always been deeply fascinated by this sword after first seeing it ages ago in Soulcalibur II. Such an elegant yet powerful sword. Thank you for covering this, Skall. You truly are the GOAT.
I'm always amused that it's the folks who are trying their best *not* to be biased that make sure to mention they got the product for free.
skall i just want to say, out of the sword community on youtube, to this day you probabbly do some of the best reviews, it's no bullshit, it's honest, you only work with good people, and I believe that's why to this day multiple companies have reached out to you for reviews sending you products.
Please keep up the good work you are literally the entire reason I transitioned from my 13 year old katana weeb phase to a proper appreciator of all swords and historical accuracy.
Beautiful work!
@12:50 awesome back ground landscape, thank you for sharing.
Love a good sword review, please keep em coming! :)
I love how the overhead swing basically makes the curve hug your form. Quite aesthetic, especially with the sea background!
Skallagrim got the Skallagrins when it sliced that mat! Haha
You’re right. Leaving a like is the least I could do. You have taught me so much about swords.
Damn, I've never been this early to a Skal video! Let's go!!!
Thanks!
Rarely do i see a reasonably priced sword that calls to me like this
You're awesome, mate! Your videos are just getting better, this is what comes to mind when i think about quality content. Bravo!
you could say that it single-handedly beats all other swords in her class
7:50 fun fact : the shield used to counter the samsir was a "soft" leather shield, able to disperse the impact.
It was also waaaay bigger than a lot of european shields, especially on the sides, because this sword is able to "flank" a small shield.
Please apologise my awful english, but i hope it's obvious that a trust attack is not a straight one, the curve allows you to hit a target who parry too close to the guard.
there is a big con, however : this sword is almost unable to deal with armored foes. The classic persian armor was a chain mail, with only one plate to protect the chest. This can explain the early succes of crusades.
So, the european sword was also used, and were researched by wealthy peoples, because
a) the blunt impact was more important and no chainmail can avoid the break of a limb
b ) this sword was more able to dispose of the "soft" leather shield
c ) the steel was a better quality one, (damascus steel was bad quality indian steel) and this added to the geometry of the blade allowed the european sword to broke samsirs
this is true in medieval era, but later, during the war between ottoman empire and european ones, this samsir proved to be far better than the straight trusting sword in this context.
Beautiful beast
... and he has a sword!
This video introduced me to LK Chen, love the quality for the price point! Thank you fine sir!
Looking like Kuzan from One Piece, ice cold.
Good to see sword review and cutting videos back on the channel skal! Also beautiful scenery. Please be safe tho.
Hey dude, been watching your stuff for yrs, you’re the man….appreciate the knowledge and content etc, God bless you and your family
Oh, handsome.
Skal or the sword? 😳😉
@@bobocan17 Both? Both. Both. Both is good.
Background never disappoints. Also, that blade looks pretty dope
I have one of these. Beautiful, well made etc but came from the factory with a completely non apexed edge. LK Chen is my favorite sword company but this was a major oversight. Took a lot of power to cut a soft plastic water bottle before I realized what the problem was.
you should send him a picture and ask him if theres anything he can do (like sending a replacement), Lk gets on top of this kind of thing usually.
To your point about the beautiful edge retention despite the thin nature of the edge geometry, good modern steels with *excellent* heat treatment are truly incredible compared to just about anything we had access to in the past.
The problem is that very few modern production swords are actually used enough to place market pressure on manufacturers to pursue excellence in that realm.
Delighted to see your video, as always.
you're not sam hyde wielding a sword?
I'm just so proud I said shamshir before you did... I feel like I'm actually learning.
I just started working at an Arabic restaurant today so this is fitting lol.
Making sure everyone gets their _khubz bizubda_ and _finjaen shay_ while they wait?
How is that relate to Persian shamshir ?
@@Imortalcatthey also use similar blades.
@@Fx_ExplainsIt's not same, persian and arabian are different in everyway you think
Hey @Skallagrim, you've been popping up in my algorithm more and more recently.... and I've been missing you for years. So whatever you've done recently has driven you to the top. Keep it up!
You kinda look like Sam Hyde in the thumbnail😂
Both the Persian Shamshir and the British 1796 Light Cavalry Saber are definitely on my list... Excellent functionality and great looks.
Great review - and always nice to see something far exceed expectations.
You presented many good and specialized articles and clips
It is quite a lovely background. The sound of the waves is quite relaxing
My mouth is watering over this sword looks really nice!
That was a nice test and evaluation. Nice details with the comment on the smooth wooden scales and the "safety tip" .
The background doesn't matter, it's the content that counts,
Interesting and entertaining as ever.
That thing is extremely reminiscent of 17th century Polish Sabre. Like the ones they were fighting with in "Potop"
Always happy to see a new Skall video! This one was fascinating to me as I’ve always been curious how effective this type of blade is. Glad for his presentation.
We have a few in our museums in my home country of Bosnia & Herzegowina . We have the original Damascus steel shamshir sabers with customized engravings for the rulers . They look like a piece of art , which is representing a lost tradition of forging .
In Iran for Street fight still use Shamshir and Another Sword which Smaller Called "Qama"
The balance of it is crazy nice, too - it's just so light and fast in the hand, it FEELS dangerous. And it is.
Wow! Looks like an amazing blade to cut with, super fun! What a great price for that quality too. Thanks for another great video!
Those mats can absorb moisture and have dirt build up over time, affecting its texture.
Conversely, if it see too much sun, it will dry out and turn brittle
Either way it affects the texture/consistency.
Just another variable to account for.
That remotely-manoeuvred camera is rad! :D The shamshir, even more so! It's gorgeous! Unclear bas-relief is something I easily forgive, especially considering the properties of the sword, which seems stellar!
Love the background!
I love cutting swords, curved blades are the best!
I really enjoyed this video it was super interesting and I was not expecting that sword to hold up that well!
Love seeing this kind of video from Skall again
Beautiful coastal area, thanks for risking life and limb to bring it to us.
Nice review Mr Skal. Your topics, scripting, pace and camera editing are good, making an easily digested video. Thank you, Gus
What else is there to say except FTA!!
Thanks for the fun video. I always loved the Flying Shamshirs in Diablo 2.
Epic scenery! You effort is much appreciated sir!
Screws And Tools just did a restoration on a very similar sword. The guard was so rusted and cruddy he had to make a new one. He didn’t take all the pits out of the blade because it would have ended up too thin and didn’t even sharpen it. It still cut cleanly through large squash.
Shamshirs are monsters no matter how old they are.
Clean review, clean looking sword. Might have to save up my shekels for one because who doesn’t like a curved sword?
9:12 that was a crazy cut