A great trailer build video thanks. I'm halfway through my own design build. Your rocking centrally pivoting axial design is good. I'm keeping mine to 2 fixed axials to aid fore/aft stability of off centre loads....👍
The wheels I found myself using grease on a washer and semi-permeant lock tight on the lock nuts to avoid wheels being to lose or locking up and the locknut from falling off. How did you keep your wheels straight and spacing right?
Hey man cool trailer! I just made my own same style. But I'm having issues attaching wheels to the threaded axle. How did you do it? I'm using 1/4inch rod. So drill holes in my rims to make fit. But don't like how unstable the wheels are. I can't make the bolt to tight on wheels or the tires don't spin. ? Do you have any tips or advice? The wheels are too wobly for my liking
If you use nyloc nuts then place ss washers on each side of the wheel before snugging the nyloc nuts down your wheels won’t wobble. Add a tiny drop of oil and the wheels spin very freely. I just built two boat trailers and used this technique. It works. Cheers!
What did you use for the part that hooks up to the truck? I'm making my own trailer but idk what to use as the receiver I already have the hitch. It's for 1/18 scale
Hello awesome build. I’m building a trailer similar to yours. The fenders you constructed. Did you make the angle iron out of flat stock. I haven’t seen angle stock in that dimension. Also what overall dimensions is the trailer. I think I’m making mine to wide. Thanks Alex
How did you fix your wheels so they'll actually roll after filming the video? as they are now the nut will either fall off if moving forward or lock if moving in reverse?? Thanks
Thanks, I was thinking about making my own trailer. Found this really really helpful. Thanks. Also dropped a like. Can’t resist this perfection. Great job.
Great video thank you! I just built two boat trailers and it was great fun.
Schöner Trailer, danke fürs zeigen👍
Thanks for sharing the blue print
A great trailer build video thanks. I'm halfway through my own design build. Your rocking centrally pivoting axial design is good. I'm keeping mine to 2 fixed axials to aid fore/aft stability of off centre loads....👍
Nice trailer! Could you list the parts you used? And where you got them?
Dude this is so awesome! I am building one right NOW! You Will see it on my channel in a few days!
Thank you! I subscribed.
@@IllaesRCworkshop thank you! Your rigs are awesome!🤘
@@IllaesRCworkshop I got my vid online. Its almost finished
The wheels I found myself using grease on a washer and semi-permeant lock tight on the lock nuts to avoid wheels being to lose or locking up and the locknut from falling off. How did you keep your wheels straight and spacing right?
Thank you! Tips I needed! Awesome
Great build and video thanks
Hey man cool trailer! I just made my own same style. But I'm having issues attaching wheels to the threaded axle. How did you do it? I'm using 1/4inch rod. So drill holes in my rims to make fit. But don't like how unstable the wheels are. I can't make the bolt to tight on wheels or the tires don't spin. ? Do you have any tips or advice? The wheels are too wobly for my liking
If you use nyloc nuts then place ss washers on each side of the wheel before snugging the nyloc nuts down your wheels won’t wobble. Add a tiny drop of oil and the wheels spin very freely. I just built two boat trailers and used this technique. It works. Cheers!
Really nice build my man i appreciate the vid👍😁
What did you use for the part that hooks up to the truck? I'm making my own trailer but idk what to use as the receiver I already have the hitch. It's for 1/18 scale
Schöner Anhänger, sind die räder kugelgelagert oder wie drehen sie sich wenn du alles festziehen tust. Mfg
Thank you this is so bad ass I’m going to make one today
Thanks for sharing bro 😎
Hello awesome build. I’m building a trailer similar to yours. The fenders you constructed. Did you make the angle iron out of flat stock. I haven’t seen angle stock in that dimension. Also what overall dimensions is the trailer. I think I’m making mine to wide. Thanks Alex
Very nice build great work. Do you build any for sale like the one you built?
No, I made it just for fun. For money is too much work.....:)
Could you send me the plan details just a rough plans will do would love to build this and the single axial trailer as wel
I don't have any blueprint but I will make it for you soon.
Have uu made plans for this build
@@IllaesRCworkshop any chance on posting the build plans, measurements, details on the articulating axles and wheels?
@@superbazooka213 drive.google.com/drive/folders/1dy5v3PxBftJgYFxisXkttb1U4doengLN
Great work! 👍
ill buy it
How did you fix your wheels so they'll actually roll after filming the video? as they are now the nut will either fall off if moving forward or lock if moving in reverse?? Thanks
Yes they are rolling :) I used ball bearings instead of wheel hex and washers between the wheel and the wheel nuts.
Wow, nice build!
Thank you!
Wow. This is amazing!
How much did it cost you?
What all the aluminum you need ??
Woww! !!...troppo bello !!!
Amazing
good job!
Where did you get the materials to build this awsome trailer? 🤙
Usually you can buy these in DIY stores.
Slick!😄✌️👍
AWESOME!!!
How many small and big wood slats did you use
Two 1 cm wide and eleven 2cm
How far in did you mount the wheels like where in between 60cm
Trailer blue print: drive.google.com/open?id=1dy5v3PxBftJgYFxisXkttb1U4doengLN
Thumbs up!!!
What's the measurement form axles to axle
110mm
Blueprint with measurments: drive.google.com/drive/folders/1dy5v3PxBftJgYFxisXkttb1U4doengLN?usp=sharing
What wheels did you use?
Cheap Dick Cepek 1.9 tyres + rims from Ebay
Thanks, I was thinking about making my own trailer. Found this really really helpful. Thanks. Also dropped a like. Can’t resist this perfection. Great job.
?????