How to Fix Lenovo OneKey Recovery Damaged Partition
HTML-код
- Опубликовано: 21 авг 2024
- How to Fix Lenovo OneKey Recovery Damaged Partition
Lenovo Hard Disk Partitions Code are:
•Recovery is DE94BBA4-06D1-4D40-A16A-BFD50179D6AC
•System is C12A7328-F81F-11D2-BA4B-00A0C93EC93B
•OEM is BFBFAFE7-A34F-448A-9A5B-6213EB736C22
•Reserved is E3C9E316-0B5C-4DB8-817D-F92DF00215AE
•Recovery is DE94BBA4-06D1-4D40-A16A-BFD50179D6AC
•Primary is EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
Here's the script from the video:
Are you facing issue of Lenovo onekey recovery partiton has damaged?
or it's just not working when you boot for recovery.. it does have a simple solutions which involves few commands in command prompt.
First of all, please be known that this issue arise when you use EASUS partition recovery to resize your partitions or to divide it.
Hence what EASUS does, is it mess up partition flags and then your laptop is not able to recognize the recovery partition. Hence, the solution i found out is very easy:
Open command prompt with administrator access:
Now run command - DISKPART
Next: LIST DISK
Usually it'll show only 1 hard if you're using laptop and has no external hard disk connected and it's disk no. would be "0".
Since mine disk no was also "0", hence next command is:
SEL DISK 0
Then next command is:
LIST PART
This command shall show you a list of partitions you have in your PC or laptop like this:
If you notice, partiton 1 is being shown as OEM, rather it should be
Recovery
Partition 2 as System is OK
Partition 3 as OEM is OK
Partition 4 as Reserved is also OK
Partition 5,6 and 7 are Primary, as this space i am using already. Hence are OK.
Now our biggest culprit is partition 8 which is actually a Recovery partition and is being shown as OEM. This is also that partition which is used by Lenovo to restore your Laptop to factory settings.
Hence here, i need to fix Partition 1 and 8.
Steps are simple:
Now run -- SEL PART 8
RUN-- DETAIL PART
It'll show that no volume is associated with this partition.
Hence to fix this, run
SET ID=DE94BBA4-06D1-4D40-A16A-BFD50179D6AC
after running above command, you'll get:
Now run again
DETAIL PART
See, now it's showing a volume associated with it.
Now we need to fix partition 1 too:
Run command:
SEL PART 1
SET ID=DE94BBA4-06D1-4D40-A16A-BFD50179D6AC
Since both partition i fixed were of recovery, hence the SET ID were same for both partitions.
If by chance, your partition 3 is being shown as Primary, not OEM, then you can fix this also by same SET ID command. I'll write in video description all the SET ID codes which can be used to fix your hard disk partitions.
Procedure would be same, like i just did for partition 1 or 8.
Now, next command to enable windows recovery option (just for being in safer side) is:
reagentc /disable
and then
reagentc /enable
then run "reagentc /info" to check the status, if it is enabled successfully:
Now you can boot your laptop using "Novo key" and start recovery of your laptop or reset it to factory settings.
Thanks for watching this Video.
Please do subscribe.
Tags: How to Fix Lenovo Onekey Recovery Damaged Partition, lenovo onekey recovery partition deleted; lenovo onekey recovery manual; lenovo onekey recovery download; lenovo onekey recovery factory default; lenovo onekey recovery not working; lenovo onekey recovery create dvd; lenovo onekey recovery windows 8;
How to Fix Lenovo Onekey Recovery Damaged Partition
Are you still replying to questions because i could really use your help
This is not fixing a "damaged" partition per say. This is fixing broken flags and ID's to access Factory Recovery Options. However one needs to use caution with SET ID command. I thank you for your guide, despite skipping steps and leaving more questions than answer I will dig up elsewhere. According to BCDINFO.TXT your RECOVERY ID is correct. Not sure about the rest of the "SET ID". My system is Lenovo M72e and this matches the Lenovo Recovery Data found in the BCDINFO.TXT file. The first partition is "SYSTEM_DRV" which is used to boot the system and use as a buffer to extract and process (RAM drive) the recovery process.
What about partition 3?!?!?!?
You did not mention THAT!!!
I had to do something much simpler. I ran diskpart and I've had only 4 partitions and the last was OEM. I selected the partition using "sel part ". Then I used "detail part" and the partition was marked as not active. I used the "active" command to activate the partition and it works now. I think this should be the first thing to look at, because you don't play with fire. I have destroyed one disk with diskpart and I don't feel comfortable to use it. It's dangerous. Without you I wouldn't find it. Thanks a lot. Please everyone, make a binary copy of your disk using for example dd command in linux, then play. It saves lives!
Update:
1. After recovery the partition is again marked as inactive, so it works once.
2. Don't activate the recovery partition, when you don't want to make a recovery.
If you activate the partition, reboot, it'll automatically boots into the recovery partition. If you won't run recovery, the partition stays active and in that case PC will always boot there, so if you want to stop from booting there, you have to manually deactivate the partition manually. It'll also mess up your boot sequence so you'll have to fix it :(.
3. Deactivation:
Make a repair DVD, boot from there, run command prompt, run diskpart, select disk, list part, sel part (select the recovery partition), run "inactivate". then type exit(to exit diskpart). type exit(to exit the command prompt). Don't reboot now.
4. Startup repair:
while still booted from repair DVD run the "startup repair". After it's done, take out the repair DVD and reboot and it'll be fine.
5. who says the first partition has the correct ID? Then your procedure doesn't work. It's my case. But I don't see how you figured this out.
PS: If you want to make a recovery, get a repair DVD from any of your friends, even from other brad and use it's command prompt and disk part to activate your recovery partition and reboot. if your master boot record is ok, then it should boot into recovery (or run in command prompt bootrec /fixmbr just to be sure it is ok)
Many thanks again for this tutorial.
Dude you are a life savior. Your this video just helped me to save my job. Thanks mate and a lot blessing from my heart and soul.
Peace...
Hi there and thanks!... this worked for me... I had to change 3 and 8 in my case... thanks again!
But in my own case i cant get to were i can lunch command prompt , it will only displayed one key recovery after power it on. kindly assist . thanks
hi i need your help i want to save my data ...I'm using z580 ideapad. as i applied it showed this
diskpart> list part
partition 1 primary 225gb 201mb
partition 0 extended 195gb 225gb
partition 4 logical 97gb 225gb
partition 5 logical 97gb 323gb
partition 2 primary 25gb 420gb
partition 3 oem 19 gb 446gb
so how to apply next step according to these partition please help me out
thank you so much
Thank you very much bro you saved my laptop. Great work !
Good video. OKR error problem solved on my Lenovo YOGA 510 after cloned HDD to SSD.
Thanks It fixed *Windows_Bad_System_config* error😇👍
Its great info...thanks a lot...wish you more success
DISKPART> list part
Partition ### Type Size Offset
------------- ---------------- ------- -------
Partition 1 Recovery 1000 MB 1024 KB
Partition 2 System 260 MB 1001 MB
Partition 3 OEM 1000 MB 1261 MB
Partition 4 Reserved 128 MB 2261 MB
Partition 5 Primary 456 GB 2389 MB
Partition 6 Primary 434 GB 459 GB
Partition 7 Primary 25 GB 894 GB
Partition 8 Recovery 12 GB 919 GB
I am having correct partition in place but still lenovo one key recovery says error onekey recovery current system cannot support backup
Never, Ever follow this approach if you don't know what you are doing. I followed this approached as exactly shown, but my partition is now destroyed. I do know know what to do next. when i tried to setup recovery again button didn't work at all
it takes me directly to normal boot options with tons of errors.
Susan Chan ... Before applying an approach you must do your own research for the successful completion of task
The technique is hundred percent correct and apply able.
god god you save my life!!❤️❤️❤️
M getting only four partions.. and they all are Primary there is no OEM
I have a B590. It says the "Recovery partition has been removed" but somehow I still see the Lenovo_Reco (D:) drive at the desktop. And it has the factory recovery "bdcinfo" "cdrivebackup.swm" and the other files. What do I do to factory restore from there?
I have done this with my Lenovo ideapad 700 it worked just fine but there is a new problem
when formatted my c partition using windows disk and tried to setup recovery again button didn't work at all
when I use it it takes me directly to normal boot options
I already change it but still cannot reset my laptop 😭
Cant set 3 as OEM because "the selected volume or partition is in use"
how to download and install one key recovery app as it say error!product definition file lost and install process failed?
Hii on yoga 510 partition 1 and partition 8 changed successfully. But for others it shows this operation is not supported by MSR. What to do.
taanks, un muy case, the partition 3 was "recovery" not oem, i chante the id to oem, and ser, problemas solved
Mine says part 5,6 are primary and I don't have an 8 part. I've been trying to reset my laptop but everything I've tried won't rest it. Idk if the hard drive is damaged or what.
Not working on my laptop bro it's showing one key partition was removed to launch the main application
my desk top has this message; service partition has been destroyed. and I cant do nothing to start it, any suggestion , please help thanks
i only have 7 parts. i am use lenovo S400. the onekey recovery is 8.0. the problem is stil when i boot the recovery mode, it say the partition is damage, not lanch the application. how to fix it. must 8 parts?
My one key recovery recovers, starts the laptop new, and boots the one key recovery again .... and again ... and again ...
Thanks so much man!!!!!
I already try set id but why cant be set it said not in the correct format
what should i do...
i only have 2 partitions and that is .. both are primary.
i have an ideapad and i have my laptop formatted before to some guy who offers repairs in our neighborhood.
He did not know what he was doing and had no clue as to what to do. Partition 1 is always the boot partition, even with fresh installs with Windows to protect the OS.
Hi, need your help. Need to fix one key recovery damaged.Have a Lenovo v570 laptop using windows 7 home premium and need to do a hard restore.. Restore button not working. Tried to fix it in cmd diskpart. Till set Id steps im good. Need the set ID to fix it. Unable to find Set ID. Please Help. Thanks,
PARTITION - ### - TYPE - SIZE - OFFSET
PART 1 PRIM - 200 MB - 1024 KB
PART 2 PRIM - 654 GB - 201 MB
PART 0 EXTENDED - 29 GB 654 GB
PART 4 LOGICAL - 29 GB 654 GB
PART 3 OEM - 14 GB 683 GB
hi dear
i have problem that OEM part shown as unknown
and can't make reagentc /disable
& enable
any help ??
I have deleted one key partition by mistake. Now can u tell me how can i create it back?
the Lenovo Ideapad don't start so i recover this machine - no 'cmd' possible the machine start with the same Error "Recovery Partiotion destroyed"
Bad approach, it's risky and also won't work in most criteria.
hallo sir can you help me with my lenovo b50-10 not working keyboard sensing pad usb port and even one recovery key not gonna work bcoz keyboard is not even working in recovery mode
Hey.. Are you still active? I need some assistance over here. Looks like mine doesn’t really went smoothly based on the tutorial.
My Lenovo G480 facing Same issue, can't even get command prompt...so what can I do? Error code:0xE0EF005D
But on my laptop it's showing recovery as 1000MB and OEM also 1000 MB
my laptop dell. but laptop not reset and CMD commond to reagentc /enable _not successfully
any way my laptop reset
Hi.. I have Lenovo Yoga 2 13.3 ... i used partition manager and now i cant reinstall windows.. My Partition 3 is not OEM. Part 3 is recovery. HELP PLEASE :)
my pc shows it as unknown instead of OEM and required=no
help me bro
lenovo flex 2 14
what i can do, if I dont have any OEM partition?
Thank u very much you are lion
works for me just fine THANKS BUDDY
I dont have the REAGENTC command
I have a lenovo x230 and I don't think I have a novo botton
How do I Access command prompt
Do you know if this Hard Drive partition codes work for Lenovo Desktop Think station P300 as well?
My theory is it should, but get the SET ID from the BCD.TXT file as the recovery is going to use this number to recover the operating system and protect the 2 OEM / RECOVERY partitions from damage.
I have an idea pad 110 and I have only 1 partition? is there a way to fix this?
No idea. Haven't used that device. And I don't know if I could say you to try this method on it.
Since Windows 7, there are two partitions. If the OEM or RECOVERY partitions are gone the only way to get them back is with factory DVD or CD's. Only one partition is suspect in my book.
there are no fixed disk to show
what if no command prompt?
All bro iam cmd solution was don't work
Спасибо
The magic number didn't work for my S10-3, but ID=12 did, found that somewhere else eventually
goood
Did not work for me, but thank You anyway. My LENOVO is apparently **** in some other way.
You say " if it doesn't reboot" but to tell us to open up something ? You think we could if our laptop wild turn the fuck on ??
OMG bored much just fookin talk😡
посаны переведите плязя, такой англицкий какой то сложный