Magnafuel ProStar 500 Rebuild!
HTML-код
- Опубликовано: 10 фев 2025
- Links to Amazon Affiliate products used in this video
Pump Gasket kit
amzn.to/2rEbRIO
Please Subscribe! www.youtube.co...
This video covers rebuilding a Magnafuel Prostar 500.
The process is very close on the quickstar 300 and 275
NOTE: Lube the main shaft seal with some grease when installing dont install dry on the shaft.
Good tip on telling me to put it in the freezer to get that piece out, it didn't want to budge before and I wanted to avoid prying it out with a screwdriver as you had warned against that. Stuck it in the fridge for an hour and she slid right out, nice and easy! Now I just need to find instructions on removing & replacing the motor bearing. Mine hasn't failed yet but it feels very rough, especially compared to the upper bearing which is still buttery smooth.
@@crazycracker289 glad it helped!
Sanding the basket in the pump…. Priceless. 🤣🤣🤣🤣🤣
Around the 6:45-7:10 mark, you reinstall the pump motor and have the same issue I'm having, which is getting those bolts to find the hole. There's nothing to guide them in correctly. I've been fighting this for 30 minutes. You kind of cut away and then came back and said "ok tighten these down". So what happened in between, and do you have any tips or suggestions on getting this straight?
To be honest, I don’t remember it was too many years ago when I made this video
thanx mine just started leaking and i ordered the kit ! thumbs up for this !
Any ideas on how to replace that frozen bearing. I don’t have a cash to buy a new armature. Curious if you have had to remove one and how you did it? Thanks
I know this a old video..great job by the way! Subscribed!
sorry if i missed it if it was said, but what are the part numbers for the motor assembly and other individual parts.
Need to rebuild mine badly!
Give Magnafuel a call
which way does the seal go in?
The numbers in the seal go against the metal or motor side. So flat side against the aluminum
@@tittan1500 thanks for the quick reply, re building my pump right now
Did You Have to Freeze It Again For The Basket to Slide in?
Dusterman no
Ok. I Noticed When You Tried To Set The Cup In? The Video Clip Skipped That Part.. I Am Going To Rebuild My Magna Fuel Very Soon And This Video You Shared Is Very Very Helpful... Thank You For Sharing... I Bought The O-ring Kit Plus Cup And Pump Vanes As Well..
I Am Going To Try The Freezing Part To Install The Vane Cup Back Into Place So I Dont Have To Block Hammer It In...
Thanks For Your Response. I Will Video My Repair Prosses and Mantion How Your Video Help To DIY At Home
How much life did u get out of that pump on e85
KartRacer#8 Only about 6months worth. Sometimes less!
wow so you rebuild this everytime ??? im runing e85 as well
I've got a 20+ year old version of this pump (Magnaflow) that I just rebuilt a week ago, never had anything done to it except cleaning the filter. Been running e85 through it for 14 years. VERY solid pumps.
Where did you have it installed on you F-body? Can you do a video on your fuel system?
Currently its installed where the drivers rear exhaust hanger was. I built a bracket to hold it sideways with the weep hole down. I could do a video on the fuel system, but that will take a while with my current schedule. Here is a quick run down, -12 AN with a bung in the bottom of the stock plastic tank to the Pump, -10 hose to the magnafuel reg and - 8 quick connects to each carb bowl. ( Oh and a - 8 return from the pump to the side of the tank.)
So far this pump supported my 632 NA at 937 wheel hp on E85 and my blow through LS at 26 lbs.
Try and do a video on it when you can please. I have a Areomotive Pro Series pump, but I cant find a place to mount it so I might have to get something like yours. I will have to get one that will support about 1400hp. Check my instagram.com/606hillbillyracer. I would put a pic of where I have the Pro mounted at, but people would be like how stupid is this guy. It is right behind the rear bumper.
606 HILLBILLY RACER
Car looks sick man, lots of killer parts.
Procharger or turbo?
Thanks! It has took me along time to get to where it is now. They are a big story about why the car isn't done. I will tell it one day when I start making videos. I don't think that the channel would do very good cause I would only maybe get one or two out a mouth.