I didn't understand anything but the video really helped me ! On the Internet i found three different gear Hub Motors.. but none of the showed THIS Motor !
you have any idea where i could get a replacement shaft for this motor? or somehow add something to the threads as ive had some overtorque damage my shaft and it spins slightly.
150 kg to 200 kg load CAPACITY ke liye kitna power ka hub motor lagana hai cycle meh ? Kitna watt? Kitna amp? Kitna watt? Kitna Rpm hona cahiye .? Cycle ke liye.
Hello, thank you for the great video, do you know if I can power this motor with just three wires? Not using the sensors ? And maybe a different 3 wire motor controller?
im so happy for this video i spent alot of hell on this motor until i found this teardown. i removed the 4th blue wire speed sensor but when i did my display was reading 99km an hour. any ideas? truly i dont even care if i have a speedometer at this point but i wanted to remove the governer.
I was confused to see 4th hall censor where 3 sensors are required for 3 phase Now I came to know through your video that 4th sensor is Speed censor.thanks
Speed sensor is connected to digital odo meter is provided. Sensor out put is dc .If we want to connect pulse counter circuit and digital out put meter is required. You can see in youtube electronic odometer working by entering. TRK murthy NFC
Sir ji, plastic pinion gear ki teeth 36 hai kya? Plastic pinion gear 3pc aur metal main shaft steel gear wo buy krna hai toh apke pass available hoga Sir . please reply
Bhai mera motovolt urban e bike rashte me ek bada sa hole tha uske andr se jour se cycle ko le liya cycle ki back wheel upar Jake niche aa gaya to cycle ki hub motor kharap ho jayega kyaa plzzz bhai bata dena😢😭
Hello there. 08:05 I will be very happy if you read and reply to my message. I'm in a bit of trouble on this one. What are the six little round pieces on the engine cover you showed at 08:05 ? is it iron? is it a magnet? What kind of problems can I encounter if those small round metals fall or are mounted upside down. You probably explained this in the video, I had to ask this question because I don't speak English. there was noise in the engine part of my bike and I opened the engine and changed the bearings. I heated the engine cover to remove the bearing and those little metals fell off. Then I attached the engine to the bike, but the engine of my bike did not work and the km indicator on the display did not work. Thank you in advance for your help.
Thank you very much for giving useful detailed information 😀 is this motor water 💧 proof or resistant , and any heat protection or not because motor is fully sealed.
Hi brother merai caycal ka hum moter bhi asee hai jab wo chalti hai tu is k hum may say ker ker ki awaz ati hai bas but chalti theek hai kaya ap bata saktay hai k kaya problem ho saktai hai kaya Bayring ki awaz hai ya kaya
Mera cycle achanak se jhatke maarne lga h jabki battery fully charged h, 4 se 5 bar jhatke dene ke baad jb thoda speed le leta h to fr thik chlne lgta h esa q ho rha h sir
I was riding my fiido d1 ebike and the rear wheel locked up all of a sudden, causing the bike to skid off to the side with me on it. It seemed like something inside the rear wheel locked up, any ideas what it could be? It was a momentary thing, the wheel worked afterwards, but caused me to brake abruptly. Actually there is a problem with my bike (i didnt take good care of it). Sometimes, the pedals don't work. What I mean is, when you turn the pedals, the chain turns the rear wheel, however, sometimes the rear wheel doesn't turn... its like pedaling backwards. But sometimes it does work. Mostly when it is warm. Its like there is some engagement pin inside the rear wheel that sometimes engages and sometimes doesn't.. Anyone know? many thanks!
There must be hall sensors wire issue which is either brokem ittle bit but somehow connected partially so during vibration contacts loose . Or it may possible connector is not properly connected and getting disconnected for perticuler vibrations. Remove all the connectors and reconnect it. Also check wires if broken or cuts on it. If this not works motor or controller need to be replaced.
@@InfiniteLaboratory 08:05 Hello there. I will be very happy if you read and reply to my message. I'm in a bit of trouble on this one. What are the six little round pieces on the engine cover you showed at 08:06? is it iron? is it a magnet? What kind of problems can I encounter if those small round metals fall or are mounted upside down. You probably explained this in the video, I had to ask this question because I don't speak English. there was noise in the engine part of my bike and I opened the engine and changed the bearings. I heated the engine cover to remove the bearing and those little metals fell off. Then I attached the engine to the bike, but the engine of my bike did not work and the km indicator on the display did not work. Thank you in advance for your help.
If thats a "Hummmm....." awaj then it could be because of damaged capacitor of motor due to which the torque required is not being produced enough. Tesle garda huna sakxa
Thank bhaiji Bahut badiya
Number bhejiye
I didn't understand anything but the video really helped me !
On the Internet i found three different gear Hub Motors..
but none of the showed THIS Motor !
We will upload same in English
Thank you for your work! Now I know how greared hub motor looks inside)
Mention not sir.
you have any idea where i could get a replacement shaft for this motor? or somehow add something to the threads as ive had some overtorque damage my shaft and it spins slightly.
Thank you . The gear made from plastic. Do you think the plastic gear will be reliable and durable for long term use ?
Many people in our contact are using it from years.
Ek log 25 thousand km chalayahe
Thank you so much for such a detailed video
150 kg to 200 kg load CAPACITY ke liye kitna power ka hub motor lagana hai cycle meh ? Kitna watt? Kitna amp?
Kitna watt? Kitna Rpm hona cahiye .? Cycle ke liye.
Sir,geekay 36v 250 watt hub motor hall sensor value? Please bataye
Hello, thank you for the great video, do you know if I can power this motor with just three wires? Not using the sensors ?
And maybe a different 3 wire motor controller?
No idea sir
Very Detailed view
Glad you liked it
im so happy for this video i spent alot of hell on this motor until i found this teardown. i removed the 4th blue wire speed sensor but when i did my display was reading 99km an hour. any ideas? truly i dont even care if i have a speedometer at this point but i wanted to remove the governer.
I was confused to see 4th hall censor where 3 sensors are required for 3 phase
Now I came to know through your video that 4th sensor is Speed censor.thanks
you are welcome sir
Speed sensor is connected to digital odo meter is provided. Sensor out put is dc .If we want to connect pulse counter circuit and digital out put meter is required. You can see in youtube electronic odometer working by entering.
TRK murthy NFC
@@radhatumuluri5421 thanks
Sir ji, plastic pinion gear ki teeth 36 hai kya?
Plastic pinion gear 3pc aur metal main shaft steel gear wo buy krna hai toh apke pass available hoga Sir . please reply
Ossama sir🎉❤
very nice explaination
Thank you
Can it be rewind with new copper wires if burned ?
Yes
Sir yea hall effect sensor ka board with speed sensor Mila ga ?
Haa molega... lekin sensor ka number konsa hai?
Very nice video sir 👍
Thanks
Mai ek naya contrller laya, jisme white wire ( sp) nehi hai. Kya karna chahie sir ?
Bhai mera motovolt urban e bike rashte me ek bada sa hole tha uske andr se jour se cycle ko le liya cycle ki back wheel upar Jake niche aa gaya to cycle ki hub motor kharap ho jayega kyaa plzzz bhai bata dena😢😭
Plz make video on how to damage excel change
Sure
Help me😢
Thanks for good information
Hello there.
08:05
I will be very happy if you read and reply to my message.
I'm in a bit of trouble on this one.
What are the six little round pieces on the engine cover you showed at 08:05 ?
is it iron?
is it a magnet?
What kind of problems can I encounter if those small round metals fall or are mounted upside down.
You probably explained this in the video, I had to ask this question because I don't speak English.
there was noise in the engine part of my bike and I opened the engine and changed the bearings. I heated the engine cover to remove the bearing and those little metals fell off. Then I attached the engine to the bike, but the engine of my bike did not work and the km indicator on the display did not work.
Thank you in advance for your help.
Its Magnet for speed sensor only.
@@InfiniteLaboratory what isfull speed of 350w bldc motor
@@InfiniteLaboratory bhi
Hub motor kit life or controller ki
I have a GK company conversion kit electric cycle but it's rear wheel has been used it may be bearing loose bearing issues can you change it
You can change by your self
Bahut Hi Helpful Very Nice
Good tiching karte hai 👍👌👍👍👌👌👌👍👌
Thank you very much for giving useful detailed information 😀 is this motor water 💧 proof or resistant , and any heat protection or not because motor is fully sealed.
Ebike Motor Gear Clutch Kit for Bafang E-Bike 30T Planetary Nylon Gears .....bro yea kaha mily ga hero c5 hai yea
Video thodi lighting jagh pr bnaya kijiye
Great brother 😍👍
hello sir, My problem is moter not take load with padling or throtal.
Pleas tell me
What is power rating of this motor ?
GOOD ONE ! !
Thanks
Hi..
Hello..
same to same motor recover I want to please answer
Call 9409137897
Bro I live in Oman where do you live
Really honest..... Thank s
Welcome 😊
Hi brother merai caycal ka hum moter bhi asee hai jab wo chalti hai tu is k hum may say ker ker ki awaz ati hai bas but chalti theek hai kaya ap bata saktay hai k kaya problem ho saktai hai kaya Bayring ki awaz hai ya kaya
Very nice video 👍
Thnq
Sir hub motor clockwise to ghum raha hai par anti clockwise lock ho ja raha,aisa kyon.maine abi ise cycle ke rim me fit nahi kiya.koi problem to nahi.
Clutch system raheta hai..
Bhai assembly and testing with controller ke sath batate to video Pura ho jata .
12v kya speed at ayegi .chalegi ya nahi krpya bataye
12v se nai chalti
@@InfiniteLaboratory can run after rewind half turns connecting 12 v
E cycle kii baki chijj ooo ka bhi details dijise
Mere pass hero electrolyte model hai uski motorcycle andar se ghoom rahi hai kya problem ho sakta hai
Naya motor lena pdega
@@InfiniteLaboratory uske andar 30 teeth wale gear hai kya vah mil payenge
Very good👍
Thank you! Cheers!
Planetary gear online kaha milenge , pl share link
Visit www.motorkit.in for all products and price
Sir moter ki garari milegi online
36v250w hub motor bicycle hai hero electro ki per usmein se abhi awaaz a raha hai kya problem ho sakti hai
May be some mechanical problems
Thank you, yes, a good view
Welcome sir
👍thanx
How to buy this product site please request help me
Visit www.motorkit.in
nicely explained
Visit www.motorkit.in
Bhai plantry gear ki kya jarurt hai isme
For gear reduction
I want to buy 36 teeth planetary gear. How can I do this
Jisko planetary gear chahiye mujhe contact karsakte ho
@@pravatkumarsethi2022 bolo contact
Bother can you please tell me how can I convert this motor in magneto
Visit www.motorkit.in for all products and price
My bicycle Motor is moving inside the Tyre rhim but Tyre is not moving . I opened the motor and fix it again but still . Facing the same issue
Buy new motor if internal gears are damaged.
Very nice 👌 video
Thank you so much 😀
Sir aapke paas planetary gear ⚙️⚙️⚙️ milega. Kya price he.. Me isanpur Ahmedabad ka hu. Handicapped hu.
Nai hai sir
Mera cycle achanak se jhatke maarne lga h jabki battery fully charged h, 4 se 5 bar jhatke dene ke baad jb thoda speed le leta h to fr thik chlne lgta h esa q ho rha h sir
Hall sensor issue may be
Bhai shab agar humko motar ka koi parts chaiye ho to ap humri kuch help kr sakte hai kya
Ji
The [M] symbol is displayed on the screen after the escape inside the motor
Motor fault
How can I unlock speed limit on this type of motor ecycle
No speed limit wire in all motor
Iski plastics wali gear garari kaha milegi plz help me
No idea sir
I was riding my fiido d1 ebike and the rear wheel locked up all of a sudden, causing the bike to skid off to the side with me on it. It seemed like something inside the rear wheel locked up, any ideas what it could be? It was a momentary thing, the wheel worked afterwards, but caused me to brake abruptly.
Actually there is a problem with my bike (i didnt take good care of it). Sometimes, the pedals don't work. What I mean is, when you turn the pedals, the chain turns the rear wheel, however, sometimes the rear wheel doesn't turn... its like pedaling backwards.
But sometimes it does work. Mostly when it is warm.
Its like there is some engagement pin inside the rear wheel that sometimes engages and sometimes doesn't..
Anyone know? many thanks!
There must be hall sensors wire issue which is either brokem ittle bit but somehow connected partially so during vibration contacts loose . Or it may possible connector is not properly connected and getting disconnected for perticuler vibrations.
Remove all the connectors and reconnect it.
Also check wires if broken or cuts on it.
If this not works motor or controller need to be replaced.
Very nice
Where we can buy the parts saparately
Contact www.motorkit.in
@@InfiniteLaboratory
08:05
Hello there.
I will be very happy if you read and reply to my message.
I'm in a bit of trouble on this one.
What are the six little round pieces on the engine cover you showed at 08:06?
is it iron?
is it a magnet?
What kind of problems can I encounter if those small round metals fall or are mounted upside down.
You probably explained this in the video, I had to ask this question because I don't speak English.
there was noise in the engine part of my bike and I opened the engine and changed the bearings. I heated the engine cover to remove the bearing and those little metals fell off. Then I attached the engine to the bike, but the engine of my bike did not work and the km indicator on the display did not work.
Thank you in advance for your help.
How do i contact u, i am from Baroda
Call 9409137897 9409137849
If i send you my hub motor can you repair
Yes. I can try
48 v 1000 watt hub motor available ??
Yes available, www.motorkit.in
sensar kaha milega
sir mai handicapd hu or hamare pass ilectronick syscle hi or hame soler penal lagana hi par meri moter or betri 12 v 8ah ki kya karu
No idea sir
Thanks Dada .
0ne. Set. Gear. Price
Sir breck kayse kaam karta hain
Call 9409137897 or 9409137849
Oill kaise lagaye ese
Bhai meri hub moter halka si chalti h full run nhi ho rahi
Visit www.motorkit.in to purchase any product related to E-VEHICLE
Mujhe motor repair karana hai motor sr awaje ata ha
Call 9409137897
Geyr kaise lagega
Call 9409137897 9409137849 or visit www.motorkit.in
Gear kahan se Manga aaega sabji
Call 9409137897 9409137849 or visit www.motorkit.in
Giyar pinjan Bering nahi milrah he
Mera wire cut gaya he.kase change karenge?
Wire cut issue ka alag se video upload krenge
Agar eski shaft key chudi kharab ho jaye to shaft kesey change krey get, kya eska spare part mil jata hey..?
Nai, lath machine pr banana pdega
Nice
Thnaks
इस हब का कीमत क्या है
Motar se Abja Aa rhi hai lekin cycle nhi chal rhi
If thats a "Hummmm....." awaj then it could be because of damaged capacitor of motor due to which the torque required is not being produced enough. Tesle garda huna sakxa
Wa reparing
Motar ka dhakan kiyu khul jata hai
Screw loose hote hai
Hii
Help me
please tell about sensor number
3144, 41F , etc
हब मोटर में रिवर सिस्टम कैसे काम करेगा
Wire aata hai
Sapret spera milega
Whatsapp par message kre 9409137897
❤❤❤🙏🏻
सुपरप्लास्टिक बैरिंग कहां मिलेगा
No idea
कीमत कतश
Just for information
Mera motorkit free ho jata he
3 plastic kchakri ghis gaya ha
Hall sensor ka number toh batau
Sab motor me alag alag ata hai
Mujhe gear garari chahie 608z ka
Call 9409137897 9409137849
I'd upgrade to metal gears.!
Wow, thats amazing,
Sensor ka mines tar cut Gaya
Nava ke neta
Koi jababnahi bejte hii sir
Call 9409137897