Thanks to all the tips and tricks vids, My speed shapes are starting to come out ok, I buy like 10 speed shapes and practice, practice, The home dipper lives!
The table is made of HDPE. With all activators it is advised to wear proper PPE. During videos we do not simply so we can still talk but we do run a exhaust film that is also still pulling out the films during the spraying process to limit the exposure.
Hey I’m a beginner at hydro I’m trying to dip my 06 Impreza middle console 3 piece carbon fiber how I make it look like it’s one price that the lines of pattern matches up? Thanks
More than likely depending on the size you would not be able to dip these all together so there is not a exact way to lineup it perfectly. If they are small enough pieces that can be jigged up together then you could do this to ensure a match. Here is a video that may be helpful- ruclips.net/video/GbuC_sB3yms/видео.html
This is one of trickiest films I've dipped. Its very thick. I had to soak a bit longer, one extra pass of activator and about 15 seconds quell. It was tough but I'm still no expert bu any means. Edit: Hahaha! Jeremy just confirmed what I said! Front face of an Xbox controller looks like Jeremy's and even better with clear coat buuuutt, 3 failed attempts for the back shell. This just motivated me to get that damn back shell done. Sheesh, I'm almost out of this film. I've never totally run out of a particular film before I finally got successful hits. I've got to finally invest in a spray gun system because of activator inconsistency. I got about 2 more trys. Let's go.
@@LiquidConceptsUSA thanks guys. After all my trials and dip after dip including practice dips with new paint or film; reading forums like reddit and K2 as well, the final conclusion was activator has to be precise. There is no room for error not even a little bit and you just can't count on that from a rattle can.
I think your friends looks cooler because it looks almost melted. They're both pretty awesome but I really like the way his looks because the colors look almost melted
Video deffo helps as I have the same film. I'm doing it out of a massive food container with an aquarium inline water heater to get water temp to optimum temp. 🤣. Will hopefully afford a professional one soon lol. Wicked video. Uhmm. 🤣🫶🏻
Liquid Concepts has easily become one of my favorite youtube channels and I've never hydro dipped in my life lol. great stuff man
Well thank you! We appreciate the view and are glad you like the content :)
I also have this pattern. Great advise. 👍🏼 your mate still did well on coverage and no pin holes.
It's a great pattern !! Thanks for watching !!
What pattern is this sir
Thanks to all the tips and tricks vids, My speed shapes are starting to come out ok, I buy like 10 speed shapes and practice, practice, The home dipper lives!
Keep it up !! Sounds like progress !! Thanks for watching !!
Nice video and very helpful what pattern is this its beautiful
That is our Copper Illusion. Link below:
www.liquidconcepts.com/shop/product-detail/copper-illusion
Please do a video with family dip just like this one loved it great job 👍
Sir..what is that kind of water..is that cold or Luke warm?
What is the table made out of that you cut your film on? What kind of activator do you use that doesn't require a mask?
The table is made of HDPE. With all activators it is advised to wear proper PPE. During videos we do not simply so we can still talk but we do run a exhaust film that is also still pulling out the films during the spraying process to limit the exposure.
what should be the spray gun? nozzle? Thank you
For activator we recommend 1.3 - 2.0. We use a 1.4 tip
Good luck dear brian👍
I whish can meet you, I want to learn. Do you have clases in person?
Yes we sure do! liquidconcepts.com/hydrographics-training/
Hey I’m a beginner at hydro I’m trying to dip my 06 Impreza middle console 3 piece carbon fiber how I make it look like it’s one price that the lines of pattern matches up? Thanks
More than likely depending on the size you would not be able to dip these all together so there is not a exact way to lineup it perfectly. If they are small enough pieces that can be jigged up together then you could do this to ensure a match. Here is a video that may be helpful- ruclips.net/video/GbuC_sB3yms/видео.html
Very good Video Brian !
Thanks 👍
Very informative thanks
Glad it was helpful! Thanks for watching !!
👌
Can't you spray the objects and not the paint?
This is one of trickiest films I've dipped. Its very thick. I had to soak a bit longer, one extra pass of activator and about 15 seconds quell. It was tough but I'm still no expert bu any means.
Edit: Hahaha! Jeremy just confirmed what I said! Front face of an Xbox controller looks like Jeremy's and even better with clear coat buuuutt, 3 failed attempts for the back shell. This just motivated me to get that damn back shell done. Sheesh, I'm almost out of this film. I've never totally run out of a particular film before I finally got successful hits. I've got to finally invest in a spray gun system because of activator inconsistency. I got about 2 more trys. Let's go.
I highly recommend in an hvlp gun for activator spraying if you want more consistent result!
@@LiquidConceptsUSA thanks guys. After all my trials and dip after dip including practice dips with new paint or film; reading forums like reddit and K2 as well, the final conclusion was activator has to be precise. There is no room for error not even a little bit and you just can't count on that from a rattle can.
Very nice work brothers
Thanks
HOLA... DESDE VENEZUELA... EXCELENTE... TE FELICITO... VENDES EQUIPO Y MATERIAL DE HIDROGRÁFICA...
I like the non pro pattern more. ;
Fair enough! It looked good too !!
Why am I singing a song in my head by "The Silhouettes" called "Get A Job" watching this video?
I think your friends looks cooler because it looks almost melted. They're both pretty awesome but I really like the way his looks because the colors look almost melted
“So easy a caveman can do it “ lol
LOL. Well, if he practices !!
Video deffo helps as I have the same film. I'm doing it out of a massive food container with an aquarium inline water heater to get water temp to optimum temp. 🤣. Will hopefully afford a professional one soon lol. Wicked video. Uhmm. 🤣🫶🏻