Thanks for your hard work Hamsa. This subject is very useful as it applies to almost every facility. Just wanted to add a couple points. Liquid seals become less and less popular as flash back prevention device at least here in Canada. The reason is that glycol concentrations drop over time when mixed with water vapour from relief fluids. Therefore, it’s freeze protection concerns. Also, usually purge or some people say sweep gas is used to maintain slightly positive pressure in the flare header. Same as pilot gas, purge gas is supplied from critical fuel gas header designed to ensure that the gas is available even in plant shutdown conditions. One more fairly new design item related to flare systems is detonation arrestor installed downstream of FKOD close to flare stack inlet. As it comes from its name, the device is some sort of last resort to prevent flame propagation back to the FKOD and flare header.
Thank you sir..searching for flare related videos ...at that time I feel that if u have posted video on this it would be useful ......today it happened...thank you again
Sir, really helpful info, but one confusion is that, I found some references flare location mensioned is downwind direction, somewhere it is written cross wind. Please explain where should be the Flare location wrt wind direction and why??
Excellent Mr Hamza I am watching your lecture about oil and gas, really very fruitful information. My one question is it's possible if sweet gas after absorber having more co2, it can carry out glycol from dehydration unit.
Thanks for the comment. Normally H2S and CO2 (acid gas ) is removing in sweetening process. No much CO2 available after this process, really not understanding your question in this regard
Super explanation thankyou sir and please make a video of produced water treatment like hydro cyclone and de gaser method all details with troubleshooting gauid......😊
Thanks for your hard work Hamsa. This subject is very useful as it applies to almost every facility.
Just wanted to add a couple points. Liquid seals become less and less popular as flash back prevention device at least here in Canada. The reason is that glycol concentrations drop over time when mixed with water vapour from relief fluids. Therefore, it’s freeze protection concerns.
Also, usually purge or some people say sweep gas is used to maintain slightly positive pressure in the flare header. Same as pilot gas, purge gas is supplied from critical fuel gas header designed to ensure that the gas is available even in plant shutdown conditions.
One more fairly new design item related to flare systems is detonation arrestor installed downstream of FKOD close to flare stack inlet. As it comes from its name, the device is some sort of last resort to prevent flame propagation back to the FKOD and flare header.
Thanks for comment and motivation
Thank you for making a video on flare systems! Please continue the series
More to come!
Thanks you for all good things and efforts,
I think your voice somehow is low, you ahve putmicrophone more near
Thank you sir..searching for flare related videos ...at that time I feel that if u have posted video on this it would be useful ......today it happened...thank you again
Thanks for the comment and motivation
thx for the information. looking forward to explaining the WKO at oil & gas facility.
Coming soon!
thank you so much for this classes sir. Especially your explanations are very easily understandable.. :)
You are most welcome
Sir, really helpful info, but one confusion is that, I found some references flare location mensioned is downwind direction, somewhere it is written cross wind.
Please explain where should be the Flare location wrt wind direction and why??
Very informative. Expecting more.
Glad you liked it
Excellent Mr Hamza I am watching your lecture about oil and gas, really very fruitful information. My one question is it's possible if sweet gas after absorber having more co2, it can carry out glycol from dehydration unit.
Thanks for the comment. Normally H2S and CO2 (acid gas ) is removing in sweetening process. No much CO2 available after this process, really not understanding your question in this regard
kind request do not use slides, use board, write and draw rough diagrams, easy to understand and will remain in mind forever!
Hamsakka polichu 😊
Thanks
Sir, please include air assisted smoke less flare in coming videos
Thanks. Sure. Will do
Sir,Please make a video on ground flare system.
Sure. will try
Sir add more detail about flare system
Thanks. I will Try
Super explanation thankyou sir and please make a video of produced water treatment like hydro cyclone and de gaser method all details with troubleshooting gauid......😊
Thanks for the comment. sure will do
Thank you for the reply sir .....😊
Thank you Sir
Most welcome