智骑ThinkRider A1 Unpacking and installation of the Smart trainer

Поделиться
HTML-код
  • Опубликовано: 24 дек 2024

Комментарии • 30

  • @geoffwalmsley3066
    @geoffwalmsley3066 Год назад

    You can connect cadence/speed sensor and heart rate sensor, I've done it,also connects to my wahoo bolt cycle computer,great bit of kit, mine came with the the throughaxle adapters,got it in the UK for £115, bargain

  • @alfonsoibanez3985
    @alfonsoibanez3985 3 года назад +3

    Hi! Measure speed and distance traveled on a garmin?

    • @robertoaugustorangelfilho6740
      @robertoaugustorangelfilho6740 3 года назад

      Hello there, the sensor with Thinkrider A1 measure only power signal ANT+. I have one, conect to Garmin Edge 130, and I adapted the Garmin Speed Sensor fixing it on the disc of the Thinkrider A1 on the opposite side of the Power Sensor, and it working registering de speed and distance, and I use too a cadence sensor on the crank.

    • @alfonsoibanez3985
      @alfonsoibanez3985 3 года назад

      Can you send me a photo Roberto?? lexu_85@hotmail.com

    • @robertoaugustorangelfilho6740
      @robertoaugustorangelfilho6740 3 года назад +1

      @@alfonsoibanez3985 excuse me Alfonso, I see your mesage right now, email sended to you today.

    • @hellohanma5717
      @hellohanma5717 2 года назад

      @@robertoaugustorangelfilho6740 can i use this with my 9 speed road bike ?

  • @aytacaksoy5494
    @aytacaksoy5494 3 года назад +1

    Hello there. I have a thinkrider A1 trainer for a while. I'm wondering why my device has a red light instead of a blue light. I would be glad if you help.

    • @thinkriderofficial3465
      @thinkriderofficial3465  3 года назад +2

      After using ANT+ to connect to the cycling trainer, the sensor module will flash blue light.The sensor module flashes red when connected to bluetooth.There is no connection, activate the cycling trainer, and blue light will also flash

  • @altarcast6306
    @altarcast6306 2 года назад

    I am using Trek Domane 3 AL Disk, Shimano Sora HG400, 11-32, 9 speed. I install my bicycle to ThinkRider A1, but it hard to pedaling. I found here someone tried replace 9 speed casseette, and you mention add spacers for 9 speed cassette. what size of spacers do I need. Can I buy Shimano CASSETTE HG400 9 speed 11-32 in amazon instead of ThinkRider A1 12 speed cassette?

  • @lexa5051
    @lexa5051 2 года назад

    the PF app is asking to "please connect the device". What device is it? thanks

    • @thinkriderofficial3465
      @thinkriderofficial3465  2 года назад

      You need to connect the bike trainer

    • @lexa5051
      @lexa5051 2 года назад

      @@thinkriderofficial3465 Thank You for the reply. But nothing is happening. my A1 trainer is already running on. there is blue light. I also have a cadence sensor in my crank. Thinkrider APP and Powerfun not detecting any device

    • @thinkriderofficial3465
      @thinkriderofficial3465  2 года назад

      You can try connecting the power meter,Because A1 is going to be connected at the power meter interface

    • @thinkriderofficial3465
      @thinkriderofficial3465  2 года назад

      You probably connect A1 to other interfaces,Need to connect it in that place in the power meter

    • @lexa5051
      @lexa5051 2 года назад

      @@thinkriderofficial3465 Thank you.

  • @lenovoaep9530
    @lenovoaep9530 2 года назад

    Why pedalling so hard? I used 11speed sproket as my java vesuvio

  • @olegpylaev37
    @olegpylaev37 3 года назад

    What type of resistant unit is used in A1 POWER TRAINER: magnetic, hydraulic or other?

    • @robertoaugustorangelfilho6740
      @robertoaugustorangelfilho6740 3 года назад

      direct mount, interactive smart power.
      1.Direct-drive
      2.Powermeter inside
      4.Software compatibility(PwerFun Thinkrider Onelat Zwift),Support Bluetooth ANT+ dual protocol adaptation software

  • @hellohanma5717
    @hellohanma5717 2 года назад

    how can i use this with my 9 speed cassette ? can i just buy the usual cassette or do i need a specific cassette for this ? I only found 11 speed cassette from sellers who market it as A1 cassette.

  • @mohfirdausbmodjo3711
    @mohfirdausbmodjo3711 3 года назад

    i have bought this trainer.. it's normal when u felt heavy when pedaling? or i must adjust / update firmware ? pardon for my bad english thx btw

    • @thinkriderofficial3465
      @thinkriderofficial3465  3 года назад

      A1 riding station is the Power trainer, and his resistance is fixed,If you feel very heavy, you can contact our engineer。email:service2@thinkrider.com

  • @austinfroid19
    @austinfroid19 3 года назад

    Where can you purchase thru axle adapters for this?

    • @juliarapp1964
      @juliarapp1964 3 года назад

      Hi that's exactly my question. Did you find a solution? I only know it must be a 142/148 but don't know which is the right one.

    • @thinkriderofficial3465
      @thinkriderofficial3465  3 года назад

      You can buy it in some offline bike shops or our AliExpress stores

    • @thinkriderofficial3465
      @thinkriderofficial3465  3 года назад

      This depends on the spacing of your bike

  • @dausmoithai6198
    @dausmoithai6198 3 года назад

    English menu?

  • @RixtronixLAB
    @RixtronixLAB 3 года назад

    Nice video, thanks :)

  • @reyguarinnjbchannel5850
    @reyguarinnjbchannel5850 3 года назад

    Thanks for sharing