Pulling Wire Like a Pro - Tips and tricks for pulling conductors through conduit
HTML-код
- Опубликовано: 6 июн 2024
- 🤘⚡️MEMBERSHIP⚡️🤘
JOIN ELECTRICIAN U - become a member and get:
FREE Continuing Education every year
FREE Practice Exams
FREE Monthly Video Courses
FREE Monthly Educational News Letter
Premium Members-Only Content
Private Discord Channel
Monthly Members-Only Discord Chats
Sign up here --- www.electricianu.com/
✍️👨🎓LIVE CLASSES👨🎓✍️
www.electricianu.com/live-onl...
👾🤖PRACTICE EXAMS🤖👾
electricianu.com/electrician-...
😎👕MERCH👕😎
electricianu.com/eu-merch/
📲👥SOCIALS👥📲
Instagram - / electrician_u
Discord - / discord
Facebook Page - / theelectricianu
Facebook Group - bit.ly/2tz7eQh
TikTok - www.tiktok.com/?electricianu
Reddit- / electricianu
Twitter - / electrician_u
LinkedIn - / electricianu
🎧🎹MUSIC AND VIDEO:🎹🎧
/ descantmv
🎬✍️ART AND ILLUSTRATION:✍️🎬
www.daverussoart.com
My first day on the job with a large electrical contractor, I watched an "electrician" with 40 years of experience, shove a metal fish tape, into underground conduit, over 100 feet, with about 15 wires. Most of those wires were high voltage for massive machines at a huge steel mill. They tied on the new wires and he began to pull the fish tape. About half way back, the tape cut into the 3 phase wiring and there was a nice explosion and smoke poured out of the conduit. I asked to be put on a different job site.
I doubt he had 40 years in the field if he thought that was a good idea in the first place.
You young man have a very special talent. I have seen hundreds and hundreds of RUclips videos since YT started. I have seen many excellent presentations but I will say without a doubt that this is by far in the top 1% of one of the most informative and superbly done videos that I have had the pleasure of watching. Your delivery throught and presence is a rarity
yes, I agree. He is a wonderful teacher....and has an incredible knack for relating to real world (job) problems.
Your videos are amazing man. Just got my first "professional" commercial electrician job and feel like I've forgot all of my training from 3 years ago. You have helped me feel more confident and some more tips and tricks.
Great info here!
I will add a couple points from my experience. Keep wire off the ground and floor whenever possible - this will minimize debris and dust that will increase friction to the wire and increase possibility of insulation damage. This is very important when working on job sites with other trades that may not know or care about wire condition. With scissor lifts buzzing around and heavy equipment moving about, wire is very easily damaged. So this brings up a point about time management. If you are going to need >30 minutes to pull in wire and you are about to go home for the day, best wait until can do the entire pull in one shot, rather than leave it, and worst of all leave the wire on the floor/ground.
Hi Dustin,
I just wanted to say that you inspired me to become an electrician, I fallow your youtube channel and watched your video on female electricians, it really gave me the confidence to go and apply for an apprenticeship, I have been working full time since March and the classes begin in two weeks!
I just wanted to say thank you for all the great content you make for us! and all the lessons you share!
Hey, just wanted to see how work is going
Back in the 50's our permissible occupations were dictated by our gender. "Female electrician" was an oxymoron. Now that I'm a 71 year old grandmother, I've discovered how much I love the fine art and science of electrical power. My brain is "hardwired" to understand it, though of course I'll never be able to access formal training. The physical demands are obviously too great. But, to get to the point, I've been rejoicing in the fact that you are speaking to me about concepts I can grasp, because you are so good at teaching them. Thank you for helping me with so many tips, tricks, and safety rules as I rewire the house my grandfather wired in 1930 by himself, in the family tradition of DIY, regardless of my gender and age. Next lifetime I'm coming back as a full time electrician😂!
Well said
Neat trick - A few years ago we were trying to pull large wire through a 5" underground conduit that came up in a concrete transformer pad.
they were able to get a steel cable through the conduit, but weren't able to get the wire through, and had to pull it all back out. Apparently some of the concrete was spilled into the conduit when the pad was poured. To dig it up and fix the pipe, we would have to tear the xformer pad up. Someone decided to tie a knot in a heavy chain and pull in through with a crane truck and it worked the concrete pulled out and we were able to get the conductors in.
Also remind the wire lube man to be very careful when pulling with a mechanical puller. If you get your hand caught between conductors when the stretched rope pulls in spurts you may lose your arm. Also stay clear of the rope at the other end as you could be injured if it breaks.
As an electrician for the past 30+ years it's good to hear a RUclips channel with Great information... Keep it up, youngsters.
Just started my first electrician job first day is Monday, found your channel and I love how detailed and no-nonsense your videos are, never done this line of work before at all but your content is a huge help in preparing myself for what I'm getting into. Cheers from VA
Good luck with the job!
You’re the man between the mentors at work and watching your videos I feel like I find a nice balance in the middle that helps me a lot.
I’m starting my first year apprenticeship within the next few months or so and these videos have always been helpful when I’m doing my tasks, thank you for helping me prepare and hit the ground running 👍
Nice dude, just be sure to ask questions and take notes. Also, a vest with lots of pockets. having whatever your mechanic may need ready, before he asks goes a long way.
Matt...welcome to the world of voltage and amperage!
I have never been on a commercial job where solid was even allowed(except in a pinch). 1/2" EMT is perfectly ok. I only bend up to 30 degree bends 99% percent of the time. No 45's or 60's. Keep your fitting set screws on the top or side, never on the bottom. Short pulls with a fish tape are fine. Pull string for longer pulls. Pull rope and tugger for large conductor long pulls. Wire lube as needed. With super short runs, I will push the wire in by hand with a loop on it, like Dustin showed in the video. If it gets stuck, I will run a fish tape in from the other side, twist it, and pull the wire out the rest of the way. Any damage to the head end will normally be cut off and thrown away anyway. Great Video. Thanks, Russ from Oregon
currently, im taking an electrician class and your videos really clear a lot of things up that I would have questions for. Especially since it's more of a class, so it would look totally different when we do the physical activities instead of all the math.
I always use your channel for new hires to help them realize what exactly what we are doing and it’s very informative for them. Oh yes Sir, I know if they are really wanting to learn the trade. Thanks for your channel!!
Well said Rob. This guy rocks...
As someone who is a new hire this video helped me tremendously. I have a few years of audio/visual event production and just got my first job dong instillation. The gig is to assist the project lead and run CAT6 speaker cables in conduit. I almost turned the job down because I was unaware of what to do, and what the job entailed. This video helped me realize I'm prepared, and knowledgeable enough to take the gig.
THANK-YOU!
Wiring my shop, because everyone is busy, and thus quoting “my day off” prices. Boxes over bends…you just saved me from adding to my EMT “art” pile😑. Fantastic videos!
Well I have done amateur wiring for 30 years and never heard about not using a fish tape to actually pull your conductor. Makes perfect sense. Thank you!
You know I got to give it to you and I don't give a lot of people respect for knowing what they claim they know you actually somebody who knows what they're talking about you get a lot of respect in my book keep doing what you're doing thank you very much for any knowledge you have given me
Where we you when I started in 2003? Was an electronic tech for 20 yrs. Then had to learn residential wiring. Then became a foreman in 3 months. Love what you do. Close to retiring. Working on 480 charging systems now... Occasionally doing side work as an electrician.
Back wrapping a head is also useful on large conductor pulls. By back wrapping I mean after the head is formed and secure then wrap it with duct tape, one layer, not super tight, with sticky side up, then follow it with a tighter layer covering that with sticky side down. allows for some slip with the conductors head as they move through bends and makes it a hell of a lot easier to remove when the pull is complete.
Another tip is don't overlap the stripped out strands back over the installation. Strip out enough to fold over only on the bare wire, and use your Channel lock pliers to squish the fold smaller. I personally use 3-4 strands from each side of each wire, making sure all the ends lay flat and parallel with the wire bundle. I personally try and stagger the full diameter end of the wire just a bit to make the transition a bit easier to pass through bends. Then with bigger or longer pulls use an extra strand or two as a wrap through the folded section and then tightly around the head to make it small as possible. This helps on tougher pulls with heads coming apart. One more trick I've learned over a couple decades, is a diaper method. Before wrapping with tape, take a rag and wrap it over the blunt end of the head and sharp edges of the wire to make it smooth as possible. When doing this you don't have to back wrap the tape, just cut it off through the rag.
25:34 Definitely the most valuable lesson I got out of the video. It drives me nuts when I work with people who think after they've starting installing and they wonder why their work is so much harder.
In the UK I have great success using dry lube - talcum powder! Much less messy. Works like millions of ball bearings. And you can blow it through duct. Duct Needs to be new and bone dry of course.
We can thread multi core cable through roof timber here. Talc Works great in drilled wood holes.
Been there done that... 98% I'm pulling wire by myself. Always tough.... Love all your stuff.
Just pulled a 470 foot run yesterday of 5 3/0 through a 2-1/2”. It was industrial so everything up on the ceiling. It was fun. We had 3 guys feeding and then two guys with the tugger for the pull rope.
I pulled a 2700 foot run of 750 MCM through a cable tray from a MCC to a warehouse in a plastic manufacturing plant. There were 22 corners we had to pull around. I set all the pulleys up and pulled a big rope through them and amazingly every pulley was perfect. We used a big tugger to make the pull and the foreman on the job was so impressed with how well it went, he bought everyone on the job lunch the next day. The next weekend there was a bad storm that blew through and a big piece of sheet metal roofing came off and hit the 750 and it blew in two. There were probably 75 to 100 different wires and cables of every size and shape in that tray and the sheet metal only hit the new one we just pulled. After they were so set on making that run in one pull and keeping it without a splice, we had to go out on a weekend in the middle of the night and splice it. You never know what is going to happen...
That's a heartbreaker
2700' is over half a mile. I'll assume 270'.
@@joshprater8533 LOL... you ever hear what assuming does? We paid for 2750 feet of wire so if the pull was only 270', we got ripped off... I tried to get them to set another utility pole at the corner of the warehouse that we made the pull to but the plant manager didn't want to do it that way. He said it would just make another electric bill to have to pay... Logic escapes some people..... He paid us probably 20 times or more what a pole would have cost.
Thats why polaris taps are the real boss
@@frank_texas7400 what is a Polaris tap?
This video (along with nearly every Electrician U video) is not only very informative but also quite entertaining! Many thanks for putting these up on RUclips!
Found this channel thanks to RUclips's algorithm actually working. I'm just starting my career as an Apprentice Electrician and have a feeling I'll be coming back here frequently.
Awesome 👏 thanks man that’s exactly what I needed to know . I’m a Hvac Tech but find myself adding new circuits mostly for add on mini splits . I’m tired of sucking at it , think I need to ask the boss for some new tools and equipment lol . Thank you definitely subscribing
By coincidence, today was shut down day to upgrade a commercial service. 3 phase, parallel runs of 600mcm. About 125 feet. Went as well as could be expected. Trust me, D-man is giving great tips in this video about big pulls. Needless to say, gonna hit the sack early tonight.
when using duct tape on the head I have found that if you wrap the first layer with the adhesive out then flip the the tape over the normal way, especially when pulling large wire that you just don't want to cut the entire head off, makes for easy remove of the tape
I used to be a contractor for Comcast. I was on the construction side and involved in doing plant extensions, usually underground. The company I worked for believed that less is more and had me work by myself 99% of the time. One of my main jobs was to go into newly built neighborhoods and running cable or fiber from the taps to the residences. The builder would have the conduit installed by the time I arrived, but builders don't usually care about the work they do when it doesn't involve them. I had one builder who had allowed concrete to be dumped down the conduits. Usually the conduits were full of dirt or were crushed. Pulling cable through conduit by yourself is a pain. Had I had your video back then, I probably wouldn't have had to learn the lessons the hard way. I liked telco work, but that company was awful.
We pull big wire with a capstan tugger. I’m a big fan of and southwire crimp on pulling heads, but we also occasionally use a spring finger style wire snagger, and yes, I’ve seen a guy stick his finger in a snagger without thinking.
I was hoping for some discussion of tuggers.
Thanks heaps mate!
Running 2x 95mm2 cable in 80mm conduit tomorrow and your tips have really made me go from not wanting to do the job to me actually keen as.
Awesome video man!! This actually answered a lot of questions I had. Thank you!
I never pulled anything bigger than 18-9 though anything longer than 30'. This video was very insightful. Solutions to problems I may never have. 👍😎
Super helpful. Can't thank you enough for taking the time to make and post this video.
I'm semi-retired now. Our company policy on conduit we never used 4 - 90 degree bends in any run. Underground there are a lot of small twists and up and downs in the ditch that will as you know factor in on the 360 rule. Long pulls man oh man. Parallel 4 inches 6 inches runs for 3 ph service was my favorite pull huge spools of 500 mcm copper wire. I was having fun and getting paid Those ditches looked straight and looked like they would be easy to pull. You get to the workday to pull that 300-foot # 6 or # 8 wire and your running for the pulling motor. I'm new to your channel. I like how intense and involved you are to do the job by code. In my working days, it seems I was always alone in pulling wire by myself ( the small stuff ). I always had a work ethic that I can work with anyone that is safety conscience first. How we get from A to B is a matter of method and the drawings. Man, I am so happy to see someone young and so enthusiastic getting into the real work of being an Electrician. I am a New Subscriber My nickname is Big C. This might be my only comment however I will be watching. Keep on working and be safe. It sucks getting old and retiring from work you love to do.
I never use fish tape - I use a shop vac and suck a string through the conduit. Works every time!
This is one of the only tricks that sucks but is still the best to beat sadistic conduits.
Yep! Get a plastic baggie and make it into a ballon of some sort (we call it a mouse), tie the jet line to it and use the shop vac on the other end! works every time! As long as the hole you're putting the shop vac on is sealed tight around the hose of the vacuum. If not, you can take cardboard and put the hose end through it, then tape around it, for a secure, air tight seal....
Except for when it doesn't... ISP applications you're better off, but OSP 😬
Water, dirt, debris, etc. - Time to get the Compressor and/or pump out.
Your a good electrician, and an even better educator... any apprentice would be lucky to work with you. You got my sub. Keep that passion, it fits you well.
Thanks for the sub!
Cool tips man. At the 20:40 mark you mentioned that You do not tag conductors before the pull bcz the labels come off. A Pro too I can offer is to "Back Wrap" the tape over the labels. It'll keep them in place and when you remove the tape it won't rip off the tags. Keep the videos coming.
Matt from Michigan
Pulling it like a pro, as you say, keep up the good work, you thought me a lot.😎😎😎😎👍👍👍👍👍👍👍👍👍👍🔥🔥🔥🔥🔥🔥🔥
Excellent instructor, love the profesdional nature and how he describes the job...good visualization...thanks for helping me save time and effort. Duke from N.E. Pennsylvania.
Can you do a video on tips and tricks on pulling old wire out and new wire into a home? Haven't seen a lot of good videos on RUclips about this, and I feel it would be helpful to hear from and electrician on the different situations you've come across and how you handled it. Love your videos.
Pulling wires out of a home can have several challenges. Romex is normally stapled onto boards 'X' amount of feet apart, and a couple inches from each box. Sometimes during "the rough in" stage of house buildings wires get run through the studs at various heights and directions as needed to get from A to B the quickest and easiest. Even around corners of the wall. Sometimes it's not worth the hassle to remove if your not willing to damage the surface. Cutting out the box and trimming the wires out of the way is the simple solution, Adding wires back in, you need to create hole path ways for them to run. This proves challenging to me on closed walls and ceilings. There are lots of cross bracing and extra blocking built into houses to make the structure sturdy.
Working in high voltage substation design I've found your channel very helpful with the low voltage stuff!
thanks dustin- your next video should be "how to pick the right end of a roll of mc before going through 100' of metal studs and realizing halfway" :)
i think he already did
Jajaja
I dont understand, why does it matter what end you have chosen? You could still get it done even if you pulled from the inside of the roll
@@justink7269 The way the grooves run makes pulling one way smooth, well pulling backwards causes the sheathing to catch on every edge and its not pleasant to pull.
Check out his video "commercial material you should know"
Thanks omg I miss doing electrical conduit there was a bunch of good reminders hope to be back at it soon
Good advice works just as well for the beginner as it does for a pro, but a Pro will appreciate it more.
Thanks for the great upload.
Had a few 100' nylon ropes made up with a small pulling grip on one end ( for smaller conduits ) and a larger grip on other end. Never heard or used mule tape but looks like a great item. Great ideal more boxes & less bends. Had a lazy boss that loved to install 360 degrees in larger conduit. Worst is when he placed a 60 degree kick right before a 90 degree bend. Longest fish was 200' but several times lazy knuckle head ran over 250' of conduit with bends. Myself and other nite sparky would take off that Saturday he pulled wires in.
Mule tape has an added benefit being used, it has footage markers along it. Making precutting conductors more precise. It comes on various size spools, and is relatively thin, making storage easy.
I learned 8 years ago that on pipe over 4inch and long pulls tape a bag of lube to the head and if it gets hung up in the pull it'll bust for you and lube to keep it moving. If not then you had a perfect pull (rare)
That is brilliant!
Interesting
They use to sell small lub bags for that exact purpose a thousand years ago it seems...I will have to talk up the supply house to see if they still have...been a few instances that that would have been kick ass.
This is a great idea
Love it.
The most intense project I ever designed the conduits for in 3D was 5 miles of 3.5” EMT in a 15,000 sq foot electrical room. I had a master electrician sitting next to me for 3 months working out the routing. We both learned a lot on that project!
Damn
@@tuckamojo7660 What? You get the amount of conduit it is in such a small space?
That would be impressive to see installed.
Justin, I'm no electrician but I am a engineer and machinist and always do my own wiring. I really appreciate your skills, teaching clarity and videos. Keep it up young man you have helped me many times and I'm sure many of us.
So glad I found this channel. Hopefully, I can glean some good hints and tricks as I venture into becoming an electrician. Thank you
Welcome!
Great, and well organized advice!
Love your channel! Manufacturing plant journeyman here. I direct my apprentices to your channel a lot
Hey guy am in Jamaica and your Channel has been a good help for me
Great Channel! I am a new low voltage designer and your channel has been amazing to learn from.
Thanks for all your awesome explanations!
The Horrible Fright Tools sells a decent nylon fish tape for cheap. They also sell inexpensive sets of rigid fiberglass pull rods that screw couple together. I have used those a lot. They are great for relatively short straight runs through such places as wall cavities. Fish tapes like to curl and get stuck.
Fiberglass glow rods are a huge life saver when adding or updating in finished walls or ceiling work...amen
Great video. Thank you for sharing!
Awesome! Thanks, Dustin!
Just subscribed finally. I'm separating light circuits in my office by putting motion detecting switches in. Currently (haha) there are seven 8 foot dual tube fixtures all on two switches (left and right) and it wastes electricity when I don't need all the lights on when I'm in one part of the office. So breaking these circuits apart, none of the fixtures are bonded nor are there any grounds running in the conduit. Some boxes are bonded but no ground running to them. I'm now going to run ground wires through and make these circuits right. Learned this from you and Sparky Channel.
Sparky has some great conduit bending videos
If the existing fixtures are F96T12 lamps, you may be better off just changing the fixture to LED.
Your always kicking ass, great work.
I might have wandered a bit, but if I expect there to be future growth, I upsize the conduit and add a pull string when pulling the wires.
Anyway great refresher. Thanks a bunch.
The problem with pull string is it can get braided in with the wires worse than another wire. Good on you for upsizing the conduit, though.
Ugly's reference guide is a valuable thing to keep on hand.
Love the "I don't use fishtape to pull" rule. Worked for a (mainly) residential solar company and the boss always told us to use the fishtapes when we'd do pulls but then would act like you can do that without them binding up. Granted pulls usually were super short but fuuck a fishtape
What's the name of the company?
@@KinGIIRomE , Nah... don't tell.... let me guess. LOL
Just an added pro tip for getting your Jet Line or Mule Tape down a run of conduit either a short or long run. you can actually get this done a lot faster than using a fish tape. If you grab a piece of plastic, like part of a plastic bag, or whatever you can find to make a small balloon, you can tie that onto your Jet Line or Mule Tape and just push it into the hole. On the other side you just put your shop vac over the conduit and turn it on. The shop vac will suck the ballon with your line tied to it through in seconds. When I was a low voltage installer we used this method on every job, works like a charm for small and large conduits and saves a ton of frustration and time.
While they have gotten pricey, conduit pistons are made for the job and blow through like greased lightning. But plastic bags are always the emergency backup.
These videos are so helpful!!
Recently did a 70’ pull of 3 #6 & a 10 ground through 3/4 pvc with 4 90s. Up in an attic, out the back to the house, down under the ground then up into a sub panel in a shed. Wasn’t my idea & what a shit show it was. Used vacuum line bcuz couldn’t get a fish tape through. When the line was clearly going to snap we used it to pull the fish tape through. The conductors came off the fish tape twice at the 4th 90 & on the 3rd try it snapped the metal fish tape completely. Brutal especially in the Florida heat. Never again
When you damn near reach the conduit fill it doesn't help your case.
Lol the hand movements and lube talk haha good video man!
First time watching your videos. Good details. Thank you. I’ll hit the subscribe button to help out 👍🏼
Extremely helpful as usual.
For hard pulls...
half hitch, half hitch, half hitch
It grabs as good as a sock, and uses the tape you're already using.
That’s what we just did pulling 3 400mcm and 1 1/0 ground. Co worker did the first head and it broke off half way through the pull . Took us 4 hours to fix that mistake. Then did half hitch x 5 and no problems with any of the pulls
The only issue with half hitch’s is it can start to tear the insulation
@@robalt91 That's absolutely correct... so pull extra through, and cut off the section that was damaged. What? Did you think there was magic? If you have to put massive force on something, things break. But if you had to pull that hard, the odds are that damage was going to happen anyway. Overcome and move on.
Clove hitch then half hitch 4x.
Agree I ditch the fish tape and hitch to the wire alone
Crazy I just pulled some 650 mcm a few months back that fit your description 85 percent 😆 even your part about extra lube in 4 inch
Amazing video. Thanks alot
"If you can beat the job with your head, you don't have to beat it with your body." thank you for giving me this phrase to use with the turnips vs the go-to work smarter not harder.
Just a tip. If you use number labels, take your electrical tape and use it backwards. I.E. non sticky side on the wire over the labels and then turn the tape over and go sticky side. Just make sure you leave a tab to remove your tape when you're done with the pull.
Thank's for all information!
Love the overall bulk of information, great refresher, however, most was relative to commercial/industrial work. In Residential work for example, your pulling with the fish tape, no ifs ands or buts about it. Granted most of the country uses romex, but in Chicago and NY, your using Emt or rigid...no exceptions less it's a MC whip for lighting.
I always thought those wiring methods were a bit overkill in those cities, but what the AHJ says goes lol
I had to do cable dawg work while I was enlisted. We ran fiber optic wires through pipes with a really long wire on a reel. Then yanked it through the pipes with 8 guys pulling. We had to cover 14 miles on 1 job.
We had to pull into a panel on this one job but through the top according to this jobs spec. So it was a very difficult angle as they were trying to figure out how to do it. I eventually mentioned to try and use two pulleys. One above the panel to the ceiling and one just above the drop into the tugger. They thought it was a great idea. Good thinking apprentice we may keep you around they said but we only got one pulley. The guy that mounted it decided to just put it in the middle of the ceiling between the panel and the tugger without anyone hand feeding up through the panel. I remember me and another guy just standing back as the tugger managed to pull the panel and its bolts clear off the wall and damaging everything. It was pretty disappointing that disaster happened like it did. The guy that did it was absolutely confused and did not seem to care of the disaster he caused. The shop owner was pissed and we all got laid off for that one even those of us not involved with that part of the job. That was not pulling like a pro. It was more like job sabotage. Do not do that. Tell that to the youth of today and they wouldn't believe you.
Finally, at 9:28 u Finally talk about what should have been mentioned in minute 1. Pulling the head and how to make one up.
respects to you and all the work you do and know.
great vid, your the man thanks
I enjoyed watching. Very helpful buddy 😎😎
Great content dude.
I typically like to use solid ground always. One because it adds a little rigidity to the boat, but once I get to a box or my pull location, I like wrapping solid ground around the ground screw rather than stranded. You can always add a pigtail (I guess).
This is and accepted method in the light commercial and residential sector. Once you get into heavy commercial, industrial and beyond, most owners, engineers, inspectors, etc. have their own preferred methods. From my experience over the last couple decades stranded wire using fork or ring crimp ends with ground screws or bolts, are the most common method. This makes taking grounds loose much easier, and offers a more secure bond with less chance of the screw rotation pushing the wire out from under it. But every one has his own way of getting it done.
PS: thanks for all the very insightful and helpful videos from which I always learn something new! :)
Excellent!
For pulling large cable I've always used one of two methods. First you strip the insulation off of a foot of wire. Fold outward four to six outer wires half from opposite sides of the cable. Then remove all the other wires back to the insulation. Bend the wires through the pull rope staggering the other cables. Tie wire the bare wires tightly and tape and soap. Then pull. The other method is to take a roll of black iron tie wire and make a basket like a condrum. Far quicker and easier than a real factory basket that has a tendency to tear up during hard pulls. With the first method never use the interior wires as they can pull out of the cable on hard pulls.
basket weaving is advanced technique lol.
@@captaindrp82 I keep forgetting todays wantabe electricians don't know how to do real electrical work like bending big pipe, pulling long runs of heavy cable, building high voltage stress cones, running bus duct, welding brackets. I had a tool buddy who the forman asked if he knew how to do something and his reply was if I can't then no one else can either.
Hey Dustin, question for you, out of the two fish tapes that Klein make which would you recommend the steel or fiberglass?
Thanks for the tips great content.
I'm not an electrician but I just find this stuff so damn cool to watch and I learn some stuff bout pulling line, fish tape, etc...
Oh my God, I'm having flash backs of running a new main to an old ass house..... not including the trench digging that was required before the official "pull" ... I've never sweat so much...... it was AWESOME
So many people believe stainless wont "rust", its stainless not rust-less it will corrode like any other metal, ferrous and nonferrous. Great vid helped a lot on a small project. Glad I readjust to 3/4 & not 1/2.
This is awesome.
AWESOME VIDS!
I use the ground wire as a pull string when adding wires to a conduit that already has wires in it
You like doing it the hard way.
Thats what I do too, its like having a fish tape already in there, ready to go!
I do this as well, far easier
@@KinGIIRomE What's the easier way? Much easier to pull with the ground and pull a new ground along with the wires you're adding then trying to get a fish into a conduit filled with wires.
What if the ground is twisted around other wires
We used to use a lubricant called " slippery lube " it's yellow in color, but worked great! we would wipe off any excess off the wire on the other end of the conduit!
Thank you for your knowledge ... 👍
Thanks for the good information
Al
Damn good information Dustin