😂 it’s not as “interesting” as you might think. It’s preceded by the trail Nasty Half. It’s a nasty half mile. If you turn left at the bottom of the exit of Nasty Half and stay in the canyon. It will take you to Nasty Crack, an extension of Nasty Half.
That was a fun trail to watch you run.😎 I cut my Tusks (same inserts) like you did from time to time, soft tires on sharp rocks. Glue 'em up and keep going. Great tires for my area.
I’ve noticed you’ve used Capra axles on many of your cars. I’ve also noticed, the servo is always mounted on top of the axle. Have you ever tried the DLux BTA Capra servo mount on a stock type chassis (Chupa) or a rail chassis with standard length front links. Was curious. Thinking about trying it.
Love my Capra,stock axles are junk plastic. I’m on my 5th front axle and left knuckle, so if you know anyone looking for right side Capra knuckles I’m your guy.
You have a lot of experience with squid inserts. Have you ever had an issue with them shifting back and forth on the rim center ring? If so, how do you remedy that problem? I got my set of squids, two in 4% fill and two in 5%. I was very excited to run them and didn't notice that they moved so far inward on my rims that my new ruptures are now no good. I'd never heard of it being a problem before so definitely wasn't expecting it.
You can try some glue on the insert to the center ring. I have a similar issue where I just have stock foam and tire but my wheels are 41mm wide so the foams have tons of room to slide. But can't really glue foam too well so when I get 3d printed inserts I will also glue them and if that doesn't work just stuff some soft foam in the sides. For mine I'd probably cut a quarter of the stock foam and then half each side. Those are the only things I know of besides new wheels.
You probably have a 1 inch wide wheel,am I correct?they say a lil hairspray will remedy ur issue but I recommend tuning rings from 3 brothers to fill out rest of wheel….and this will fix ur problem
Then bugs wasn't nothing like that now if you run down the highway and look over first thing of a morning you'll see millions of them hovering in the air dude I can't even go outside of my home it's never been like that and all of my life and now there's this other little black bastard even smaller that bites you and leaves a hole bigger a damn mosquito and it itches more than a mosquito bite
I literally just said “wow” out loud. Dipping that rear to pick up driver front. Amazing driving.
If that’s how those lines get named, I definitely don’t want to know how “Nasty Crack” got named. 😂
😂 it’s not as “interesting” as you might think. It’s preceded by the trail Nasty Half. It’s a nasty half mile. If you turn left at the bottom of the exit of Nasty Half and stay in the canyon. It will take you to Nasty Crack, an extension of Nasty Half.
Realy cool lines😎
Watch out! There's a giant dog in the background! 😂
That was a fun trail to watch you run.😎
I cut my Tusks (same inserts) like you did from time to time, soft tires on sharp rocks. Glue 'em up and keep going. Great tires for my area.
They say if you flip the tusks around they work even better. 💁♂️💁♂️
I’ve noticed you’ve used Capra axles on many of your cars. I’ve also noticed, the servo is always mounted on top of the axle. Have you ever tried the DLux BTA Capra servo mount on a stock type chassis (Chupa) or a rail chassis with standard length front links. Was curious. Thinking about trying it.
Love my Capra,stock axles are junk plastic. I’m on my 5th front axle and left knuckle, so if you know anyone looking for right side Capra knuckles I’m your guy.
Ur doing something wrong bro! I have no issues with mine. Matter of fact I’m getting ready to use my plastic take offs on another build
Nice, these cut n shut Tusks.
Which glue are you using?
Awe, the rum runner..??
You have a lot of experience with squid inserts. Have you ever had an issue with them shifting back and forth on the rim center ring? If so, how do you remedy that problem? I got my set of squids, two in 4% fill and two in 5%. I was very excited to run them and didn't notice that they moved so far inward on my rims that my new ruptures are now no good. I'd never heard of it being a problem before so definitely wasn't expecting it.
You can try some glue on the insert to the center ring. I have a similar issue where I just have stock foam and tire but my wheels are 41mm wide so the foams have tons of room to slide. But can't really glue foam too well so when I get 3d printed inserts I will also glue them and if that doesn't work just stuff some soft foam in the sides. For mine I'd probably cut a quarter of the stock foam and then half each side. Those are the only things I know of besides new wheels.
You probably have a 1 inch wide wheel,am I correct?they say a lil hairspray will remedy ur issue but I recommend tuning rings from 3 brothers to fill out rest of wheel….and this will fix ur problem
where do you get your rims anodized
Are you done making tires been trying to get them from months
Those bugs just hatched in grand junction. They can really ruin a good time
Interceptor or kraken?
How much does your car weigh?
Then bugs wasn't nothing like that now if you run down the highway and look over first thing of a morning you'll see millions of them hovering in the air dude I can't even go outside of my home it's never been like that and all of my life and now there's this other little black bastard even smaller that bites you and leaves a hole bigger a damn mosquito and it itches more than a mosquito bite