Chain Size for your Windlass with The Knotty Professor
HTML-код
- Опубликовано: 31 окт 2020
- If there is any question about what size chain you need for your windlass, this is the video for you. Don't just go by the owner's manual- verify your chain size for your chainwheel before you make a costly mistake
Спорт
Great video, thanks
Super helpful videos! Thanks for them
funny, was going to order from DH but i wanted to double check my windlass and I found this vid. thanks
Helpful!
On the contrary. Generally speaking, stainless steel is stronger and more corrosion-resistant than galvanized steel. Stainless steel chains are also typically more expensive than galvanized steel chains.
Galvanized steel chains are coated with a layer of zinc, which provides some level of protection against rust and corrosion. They are commonly used in applications such as playground equipment, animal tie-out chains, and general-purpose utility chains.
Stainless steel chains, on the other hand, are highly resistant to corrosion and can withstand exposure to harsh environments, making them a good choice for marine and outdoor applications. They are also commonly used in food processing and medical equipment, as they are non-toxic and easy to clean.
Will 1/4 g30 work in my windlass 700 lewmar?
No mention of BBB or HT chain types. Important since gypsy for one type will not work with other. Also no mention of crevice corrosion in salt water of stainless steel making it unsuitable for use in many professionals opinion.
Hello- thank you for the comment. I address BBB vs G43 in a different video. We broke the chain video up into different topics and this one specifically addresses size where BBB generally refers to the grade of chain. When BBB is referred to as a size, it's a reference to the chain being sized for a gypsy but it's not really a great size description. Also, galvanic corrosion is mentioned in the stainless vs galvanized chain video. If you do use stainless in salt water, it's recommend to get 316L grade for the low nickel content to make it more corrosive resistant.
I have a 10 mm chain. I want to add more chain. Can I add 3/8 chain to my existing 10 mm chain and use the same Lewmar Gypsy?
no it won't fit/grab
my windlass say 8mm or 10mm can i use 5/16
0:41 That's what she said.