Every Civic EG K Swap Mount Kit Explained
HTML-код
- Опубликовано: 22 авг 2024
- Every Civic EG K Swap Mount Kit Explained
By Brian Gillespie and Aaron Gaghagen
There are several different K swap mount kits made by Hasport Performance. Do you know which is the one you need for your 1992-1995 Civic? Brian walks us through the differences and how to determine what mount kit you should use for your setup.
Like us? We’d Love Your Support!
Help Support VTEC Academy by hitting up our store for gear at vtec.academy/shop/ or help us by sharing (it’s free!) this post or others with other cool Honda people.
You can find killer deals on stuff we actually use here on our Amazon Page at www.amazon.com.... Items you buy using the link will give us a small kickback and help us bring you more Honda and Acura projects!
You can also help support VTEC Academy by shopping for your Acuity Instruments parts using our link at acuityinstrume...
Nothing but Hondas. That’s exactly what you’ll find at VTEC Academy. Because Soichiro Honda’s passion for motorsports and his company’s ability to express that in the machines they produce make a whole lot of sense. VTEC Academy is a place for Honda fans who feel the same way and who seek the most accurate technical information and commentary to continue that very legacy and make whatever Honda it is that they drive just a little bit better. And faster.
The editors and contributors of VTEC Academy are some of the industry’s most experienced and trusted, which means the informative, unique perspectives you need are all right here. And, like you, we’re also obsessed with Hondas. So, subscribe to our channel and hit us up at vtecacademy.com or, if you’re into social media, you can get your daily dose of VTEC Academy on Instagram, Facebook, and Twitter. We’re always on the lookout for cool, fast Hondas.
DISCLAIMER:
VTEC Academy videos are for educational and entertainment purposes. We can not guarantee the modifications performed in the video are legal in your locality. Do not do any modifications to your vehicle that will void your warranty or in any way violate your local laws. We assume no liability for property damage or injury as a result of any of the information contained in this video. Use the information provided at your own risk.
Back in 1998 or 1999, I was putting a B16A on a 90 CRX and I was using Hasport's First gen welded EF B series mounts. It was quite a struggle, but the engine went in. The engine looked crooked, it wasn't in line as it should be. I kept thinking I had done something wrong or the car or the engine was bad. I had a few friends come by and help me trouble shoot and the only thing that was making the engine sit crooked was one of the Hasport mounts. I thought I was screwed, that Hasport would never believe me. So I contacted them anyways and I actually spoke with Brian. He sent me another mount right away and I sent the bad mount back. It fixed the problem and the engine lined up perfectly. Problems occur, and everybody has fun when things go right. You know you deal with a good company when they correct the mistakes and fix a bad situation right away w/o delay. Thank you Brian for all these years of being a man who stands by and backs up his products.
Probably the most informative and active honda youtube account
Does it apply to 2010 honda accord set of engine mount
We don't have those yet.
@@VTECAcademyno queda muy expuesto el cárter? Que hay del ac y la dirección hidráulica? Abrazo
Why am I reminded of soft core late night TV when that music was playing 😅
Great job bro you made a perfect video for all of us
You guys are the best, love the content and the support to the car game!
Fantastic video, guys! I wish I had this resource when I did my swap! haha.
Thanx for all you guys do...your Killin it..teaching an old dog new tricks
Where the love for the RD1 RD2 guys smh dam the EG’s get all the love
No way, I actually need some eg K swap mounts to K swap my del sol 😩
thank you for the time, effort and detailed explanation's on everything. Love getting schooled by the vtec academy
Excellent video!
Love your guys' videos, unfortunately I need a mount kit for the next gen civic but I've learned so much from watching your videos.
Don't know if you will see this message and you have probably have the answer but there is several kit for ej/ek k swap, or you have to use eg/dc2/del sol subframe to install them
i need one of those hoodies
So do we comment on the Instagram post or make a new post?
Love this video. I’m running k20 awd my thoughts behind that is the transmission will prolly last longer without the extra torque. But definitely prefer the extra ground clearance
Anticipating your 8th gen Civic J series swap.
Currently have 2012 Accord V6 calipers and rotors bolted on
Purchased a CRZ 6 sp swapped bell housings and purchased the 6 sp gear selector from Europe.
The CRZ and Civic housings and input shaft have the same pat numbers.
Axles ??? Hopefully fit.
8th gen Si shifter.
Its not in the car yet but soonish maybe.
I need to wire a switch for the reverse lockout.
Thanks for all you do!
Fantastic Content Guys. Thanks for the Technical Knowledge you have bestowed upon our Noodles..😅
Next contest winner or special event selected. Allow the winner the opportunity to help the shop complete a project. I'd enter any event or purchase Merchandise for that opportunity..
Either way, always a fan.
Ronnie
So interesting im working on a b swap the parts are so expensive and hard to find I think this swap would be ideal and more cost effective at this point I'm interested in the tsx engine and any lsd transmission wish me luck also would like to know more about these awd set ups great job I will continue watching such an inspirational channel dream big guys
Love the content, I don't even have an EG.
Can’t wait for the Ek giveaway. My Honda Orthia can really use a set 😅
Soo siick🔥🔥you guys are the best
Great channel
Thinking about potentially K-Swapping my Mk1 MR2 in a year or so once my 4AGE gets more tired, does VTEC Academy tackle non-Honda shell for swaps as well? Does Hasport offer mounts for this application? Thanks!
Whats the difference in ground clearance between the k20 and the k24 mounted at max height position?
Just got a eh gonna do a kswap
Hell yeah!
For the sake of all of us poor California smog law victims, please make a bolt in B-series transmission mount to easily switch back and forth between K swapped and B series! Thanks for all the excellent videos and your long term support of the modified Honda community!
Nothing but honda ❤
So is there an issue with running the k24 engine and trans in the high position in the eg? I’ve been running mine like that since it was swapped into the car. Of course I cut the awning in the hood for it to clear
: Is that Scott and Scott's dad? : 😂🤣😅😉
#KSwaptheWorld 🌎
Can these mock ups work for the integra chassis too?
I have the hasport lean kit and the rear mount and drivers side mounts don't line up. To be specific I am using a k24z3(i know this is a problem) but the timing cover mount isn't the problem. The drivers side mount is pushed about an inch towards the outside so the factory mounting hole won't work. The rear mount is close but is also about an inch short to reach the transmission (i am using 02 Civic Si transmission) so if the dog bone was a little longer it would be fine. I was wondering if there was a way to just get a longer rear dog bone since that seems to be the most difficult mount to try and remake myself. The drivers side mount hole seems as though it would be easy to just drill a new hole for the mount. The timing chain mount looks like I could just elongate the hole slightly so that there are 3 bolts holding the mount to the engine. Any suggestions or help would be very appreciated.
Man I need to buy a house, having a lift is a blessing
Thanks 👍
Looks like I’m finally gonna have to get instagram. I need k swap mounts for my Integra 😭
What crv bracket is used on k24 engine to be used with hasport mounts?
Fn2 k20z4 gearbox which kit should i buy?
Damn I would have loved to have entered to do this I just don't have an Instagram😢
I have EG 93 w/ ph12 engine, planning to swap k20a.. where can I order engine brackets?
Do the motor mounts work for a k 24 auto ?
For the give away entry; Do we post the video? Post a picture of the video?
I went to the video release posting and did the @ and the # you requested. Hope this is right 🤞
I have a k24a with a 2013 civic si trans what kit egk4?
Can i go to you shop and buy a set of 1990 si hatchback motor mounts?
I need them mounts!!!!!!!
I don’t see kit 3 sold anywhere
thank you for this. I'm in the research phase of planning a k24 swap with AWD conversion on my eg and I think i just found my mounting kit ;) . Any words of advice for my planning? I am trying to build a daily with around 240-260 hp I live in a mountain town and love to hit these windy roads from time to time so thats why I was figuring a K24 for the torque needed to get up the hills quick and awd to stick to the road. would you suggest a turbo to bridge the power gap until the v-tec kicks in. what is the best diff (i heard wagon)? should I "Frankenstein" with a k20 head? what years are the best for my block/head? any suggestions on suspension? What would you do in my situation? Thanks for your time and all the great content you put out, it is very helpful!
A turbo will increase power beyond what VTEC is capable of.
Any same video for EK?
On that k24z2 how you make your idler further from the mount
Got anything for CB7 accords?
Working on it now.
Are the LEAN Version 2 mounts any better with hood and ground clearance?
What do you recommend for an EG with a K20a2 swap trying to run power steering with a dc5 pump? When I put it on the higher setting, it hits the hood.
With PS you have to use the lower setting.
Do any kits allow the use of the 03 to 05 accord 5spd trans?
By any chance do you have the OEM Stay C intake bracket part
# 17263-PND-000
where can I purchase the kit?
Does this work on EG's that came factory with an automatic transmission? Because the driver side engine mount ears are skinnier on autos and for b swaps you need an auto to manual mount in order for them to slide in place but I seen no option for different engine mounts for this kit?
Yes it does. Those ears get cut off on both manual and automatic chassis.
@@VTECAcademy I thought the ears only get cut on passenger side frame rail? It looks like you slid the driver side engine mount into the factory ears?!
@@brashgarage you're correct the passenger side gets cut off. But, the diver-side mount is the same width auto or manual. It may look different, but it is the same.
@@VTECAcademy Oh okay strange I bought innovate b series mounts for my EG and it was to fat to fit in the driver side ears and innovate said it’s because i need an auto to manual mount as they’re skinner but i never re ordered the auto to manual just returned the regular ones. Im about to k swap and am just making sure it will fit before I drop the money!
What year is the CRX?? I have an 1987 CRX and I am thinking of upgrading.
We have a K24 swapped 1st gen CRX project video series. Check it out. ruclips.net/p/PL9Qq92QbHKkhb_xhQNh1v8WhiT__0jb0M
Rsx or SI manual transmission works on crv engine k24?????
Yes
can i still win those mounts? really in need for some mounts XD
the transmission makes the difference
But thanks
No Rotrorex supercharger..for EK Hatch then ..Hasport USA only Tegiwa UK For the BEST..
How do you mean?
sub- long time ago mentioned Rot'rx Supercharger many times Was hoping I could get 1 that's all. other USA sites also ..
Swap ideas for a k24W ?? Please help
I know you keep asking. I don't have that newer car or engine yet.
Thanks for reaching out, you’ve got great and informational content. I’ll be watching till you do
@@VTECAcademy If you were closer id lend you a k24w with a 6speed to mock up but east coast canada is a bit far from arizona lol
EF LOVE???
someone 3D print him test blocks and transmissions lol J series K series DBFH all of em. and the varying transmissions ok bye
Oooooooooft 😊
J+L??????
THE VIDEO THAT "DANA" NEEDS TO SEE FOR HIS YOU·TUBE CHANNEL CALLED ( YOUNG STATIC ) FOR HIS E.G. HATCH PROJECT CALLED "BLUE BERRY" HE COULD USE THESE MOUNTS
Lets goooooooooooooooo!]
🇵🇷💯💪🏾
Stop riding young static
I want an fg1K kit🥲
I’m interested also looking to build a track car
Is it still necessary to run a smaller P/S pulley/k20 pump for a jdm k24a with the lower settings in the egk2 kit? I can't seem to google good enough to find out