It looks like 3 years since the last comment but I have had the 35 cal for three weeks and shot about 1000 pellets through its and found that the pellets probe hangs and want close with out the magazine in it. What I found was a loose grub screw. I did tighten it but it is still working loose after a 100 shots or so now.
Hello Earnest, Would it be possible if you can talk to Frederick and if possible you can put together a kit to replace screws and rubber seals and gaskets in a kit for the Impact and dreamline series rifles. Your videos are very informative and I know it helps a lot of the Airgun nation out a lot Let me know what you think about my suggestion.
Thank you for all your videos, Ive watched them all for the impact, I have the .25 cal , I'm shooting the 34 gun JSB Heavy I went from 868 FPS to 640 FPS over night With no leaks & the reg reads the same about 140 or so & the power wheel is on high? Ordered the rebuild kit from AOA , my warranty is up. Where should I start ? Also can I send you my gun if need be for repair ? Thanks
VS leak when reg pressure to low, mine leak at 110b -120b so I leave at 140b where it dont leak. if that's not the case your VS seat is dirty or pitted.
Most informative video on fx Airgun in entire RUclips channel! Keeps your good workin alive. you have a life sir. Wish you a long live.
It looks like 3 years since the last comment but I have had the 35 cal for three weeks and shot about 1000 pellets through its and found that the pellets probe hangs and want close with out the magazine in it. What I found was a loose grub screw. I did tighten it but it is still working loose after a 100 shots or so now.
I have the 25cal & like you after 100shots everything is loose again, even using loctite
you are bloody smart thanks for all your videos!!!
you need to do more videos because you explained everything exceptionally well!!!
Hello Earnest, Would it be possible if you can talk to Frederick and if possible you can put together a kit to replace screws and rubber seals and gaskets in a kit for the Impact and dreamline series rifles. Your videos are very informative and I know it helps a lot of the Airgun nation out a lot Let me know what you think about my suggestion.
Roy Burkett jr, have stainless less screw kit on ebay, seal kit orderer at FXUSA
Where can I buy, for my FX IMPACT MKII POWER PLENUM
my comment might be too late but i would suggest a thru hardened dow pin with a half diameter engagement on the pellet probe
good morning, My probe on my FX jiggles. Shouldn't it be firm? Was going to hunt on Friday.. Need help! What tools do I need? Thanks, Tim
Thank you for all your videos, Ive watched them all for the impact, I have the .25 cal , I'm shooting the 34 gun JSB Heavy I went from 868 FPS to 640 FPS over night With no leaks & the reg reads the same about 140 or so & the power wheel is on high?
Ordered the rebuild kit from AOA , my warranty is up.
Where should I start ?
Also can I send you my gun if need be for repair ?
Thanks
Mine is one that comes loose.
Hi brother. Great video. I have problem with my fx impact it's leak from the barrel what may the problem?
VS leak when reg pressure to low, mine leak at 110b -120b so I leave at 140b where it dont leak. if that's not the case your VS seat is dirty or pitted.
Esting Rowe
It's leak in any pressure even 200b.
need to inspect the valve sealing surface, in most case it may need resurfacing or replacing
Esting Rowe
I'll check it. Thanks for your help 👍🏻😊
check oring under the metal valve seat also
Very good !!!!!
مسوي زحمة والشارع فاضي