Hi Hx, we are the leading mfg of desktop soldering machine based China, contact me via whatsapp: +8613712185424, I will send the video and detail specifications.
We are the USA's Robotic Soldering Central! We offer more robot configurations than anywhere else! Give us a peek: www.promationusa.com/robotic-soldering-glance
Thinking about building my own. It won't be amazing like this but should be able to rework boards, as well as probe without worrying about shaky hands ha.
During the optimisation of the process, you will vary parameters and the wire feed position to ensure every solder joint is the same every time so this does not happen.
For only $50k this unit can be yours!!!
@Gradius2k Have you seen one in action? The micro-laser are they as cost-efficient as the solder ones?
Probably more than that.
I need a desktop version of this ;-)
info.okinternational.com/robotic-soldering-system?__hstc=6982572.fef50976936b4fbc6ea0274b90af5058.1574181951753.1574238623621.1574243803468.3&__hssc=6982572.1.1574243803468&__hsfp=1226952837
Hi Hx, we are the leading mfg of desktop soldering machine based China, contact me via whatsapp: +8613712185424, I will send the video and detail specifications.
We are the USA's Robotic Soldering Central! We offer more robot configurations than anywhere else! Give us a peek: www.promationusa.com/robotic-soldering-glance
Pls contact whatsapp/wechat/tel: +86 15820879586
Thinking about building my own. It won't be amazing like this but should be able to rework boards, as well as probe without worrying about shaky hands ha.
Wow ! Impressive !
Batman
very good video
amazing
Have you get some issue like insufficient solder ???
During the optimisation of the process, you will vary parameters and the wire feed position to ensure every solder joint is the same every time so this does not happen.
can you share the contact time? how many is minimum of contact time which can damage PCBA?
hi ! for all technical questions, please go in contact with our technical team via Technical-Service@Weller-Tools.com. thx.
Careful, I have two of these. They are very buggy and support is limited.
@@tlo2006 I heard they were completely discontinued...
The machine from Weller was discontinued.
Can this machine help me solder bga and qfn packages?
No, it is not that type of machine.
I want sell that soldering machine in china,so can you help me?
Hanzhen harmonic drive gear , robot arm gear , gear reducer, over 30 years experience
i need this
i want a soldering iron with legs so i can command it to chase people around
Amazing!
thank you, Adriano
Weller you are not supposed to put solder on the soldering iron but on the joint itself
It's fine this way as the molten solder is in contact with the head and heats up the part in the process.
You can put a dab of solder on the tip prior to placing the iron on the joint. Some people do these when manually soldering.
I believe that putting solder on the iron whilst it is in contact with the pad increases the contact area allowing better heat transfer.
Its not the preferred method under IPC guidelines, however it is still perfectly acceptable to IPC
Sir chaiye machine price batye
At a price
in 10 years these machines will test for faulty chips , remove and solder for you . Unreal
Goog
Its SoLLLder not SoDDDDDer
Aluminum