Materix 7.0 Effetto Metamorfica | Gebrochener Stein Effekt in Alluminio
HTML-код
- Опубликовано: 19 мар 2019
- Today I would like to introduce you to a very successful product Materix 7.0 Effetto Metamorfica.
PRELUDIO is a universal primer for decorative wall design, equipped with wet abrasion resistance and good permeability for water vapor. Suitable for various surfaces, such as classic and premixed concrete, plasters, plaster, wood ..
The product meets the high quality!
Processing: with roll
Dilutable with water: 20 - 25%
Drying at 20 °C: After approx. 4-5 hours
Consumption: PRELUDIO: 8-10m2/litre.
Materix 7.0 Bianco W. White lime filler for indoor use to achieve a unique decorative surface. The homogeneous and soft product is easy to use and can use the right application technique to effect the Roccia Metamorfica (Broken Stone Effect) and Roccia Rigata effect.
Underground preparation: the substrate must be dry. Clean the surfaces to be treated and remove loose or peeling parts. Apply a layer of PRELUDIO to 25% diluted with pure water. After about 4-5 hours at 20°C continue with the application of MATERIX 7.0 Bianko W. In the case of the old and brittle substrate, it is recommended to first dilute a layer of deep base concentrate with pure water before PRELUDIO, apply.
Consumption MATERIX 7.0 Bianko W: approx. 1.7-1.9 kg / m2
Materix 7.0 Bianco W - 4 litre filler in white + (120 ml Color Kit R) in black
Drying time approx. 2 hours. Afterwards, a little water sprays on the wall and the processing becomes lighter and softer. After about 24 hours at 20°C continue with the application of Kalahari micron Alluminio 03.
KALAHARI MICRON: Consumption: approx. 6 - 8 m2/litre
With a suitable sponge, apply the Lasur Kalahari micron Alluminio 03 thinly and evenly. Continue using SHINE R-5° after about 3-4 hours at 20°C. SHINE NEUTRAL 00: Dilutable with water: 2-3%. Consumption: 200-250g/m2.
Mixing ratio: mix 80 ml Color Kit R to 1 litre (1.35kg) Shine neutral 00. Then dilute with 20-30g of water and apply to the wall (see also our video guide). Apply the Shine R-5° with a suitable sponge. After about 3-4 hours at 20°C continue with the application of Kalahari micron Alluminio 03.
The second and last layer Kalahari Glaze! With a suitable sponge, apply the Lasur Kalahari micron Alluminio 03 thinly and evenly. Drying time approx. 4-5 hours at 20°C. Finished!!!
Practical advice: the ambient temperature should be 5°C to 35°C during painting and the relative humidity of the room should not exceed 80%. Avoid direct contact with eyes and skin during application, use clean water for dilution and store the undiluted product in a closed container - Хобби
Seu trabalho é show, parabéns você é um artista...
Danke sehr
Italian products are just the best in the world, hands down they are at another level
Thanks you!
Muy Emotivos Tus Diseños De Pinturas.👍 Gracias.
👍 Gracias.
Que hermoso y elegante pintura, otro nivel, precioso
Danke dir Rosa!
Que Belissimo trabalho !!!!!
*Obrigado pelo comentário*
Maestro 🙏 I just learnt something new today🙌
Great, then have fun!
😳😳😱😱damm brother wonderful work God Bless u wow that’s amazing
*Thank you!*
Perfect work and finish. Thank you for the detailed explanation on materials, quantities and application
Gerne! Danke für der Kommentar!
Looks very elegant, cool, modern and utterly professional. What a pro! Absolutely stunning workmanship👏! 🤓🌹
Vielen Dank für den Kommentar! Gruß aus Germany!
My pleasure!
That is art! Impressive, thank you for the step by step and uploading the video.
Thanks you were much!
brilliant work and clear instructions for foreigners... i know what my next career is going to be
Thanks for the comment. Have fun with your new job.
This man is an artist! Gorgeous work!🤓
Thanks you!
Thank You for inspiring me! 🤓
БРАВО!!! СУПЕР!!! Музыка и Работа,
*Спасибо за комментарий! Рад, что понравилось. Приятно, что видео остаётся не без внимания!*
Oh Gott, ich hab das verstanden. Auf die Musik könnt ich aber verzichten.
Excellent work!! Beautifull texture
Thenks you
Sehr gutes Video , ohne etwas zu sagen verstehe ich die Arbeitsschritte und was ich brauche. Mach weiter wo.
Grüße aus Aachen
Danke sehr!
Bravo čovjeće predivno pozdrav iz Zagreba Croatia
Danke dir Slovenka!
It looks gorgeous! You are very talented! Kudos to you! I love this piece of art!!!!
Thanks you!
Bonito trabalho. Parabéns
Danke dir für den Kommentar...
Ótimo vídeo! Aprendi um bocado!
Danke
Boa noite amigo que tipo de massa é essa que ele usa?
Awesome sir you are gentleman and thank you for information
Thanks you
Очень красиво. Нет слов👍👍👍👍
Спасибо!
marmer paint GO GO GO continue to be passionate to be creative, keep watching, and the video is good
*Thank you for the honest Comments!*
Muito bom. Parabéns 👏.
Danke sehr!
Uau que lindo esse efeito
Danke sehr!
Ecxelente lo felicito. Por está novedad saludos desde venezuela
Danke für den Kommentar! Gruß aus Deutschland!
🤗😍 Ganz prima geworden , WOW 👍😊😍🎨❤
Danke sehr!
que belleza de textura, desde Colombia, exelente
Danke sehr
спасибо получил удовольствие.решил сделать у себя такую стену.браво
Спасибо за просмотр! Желаю успехов!
Incredible process. Thankyou
Danke für den Lob!
Great result! Well done!
Danke sehr für den Kommentar!
Thank you very much, good finishing
Gerne! Und danke für den Kommentar!
Einfach wunderschön !
Danke sehr!
I was deciding which wallpaper (bought & planned) to use when I saw THIS... I got inspired to do my walls with this idea.
I was planning to use Ardex on my flooring but now on walls too. 😉😉😉
Very good!
Awesome work!
Thanks you!
Muito bom, ficou perfeito
Danke sehr!
Muito bom seu trabalho
Obrigado
And you enjoying your work, wonderfull.
Hello to you.
Danke für den Kommentar
Passei por aqui novamente .sua arte é um espetáculo que vale ver denovo 🤩🤩🤩
Danke sehr!
MUITO BOM ..PERFEITO
Danke!
Boa noite amigo vc sabe que tipo de massa é essa que ele usa?
@@ricardocoimbra6199 Hallo, du brauchst Materix 7.0 Spachtelmasse auf Kalkbasis.
Красота спасёт мир! Спасибо!
Спасибо
Very talented!!!!😃💪🏼👍🏼
Danke sehr!
legend craftsmanship👏👏👏👏👏
Thanks You!
Wonderful creation
Danke sehr!
Magnificent !
Thanks you !
Whaouw c'est superbe ! Bravo
Danke sehr!
Bellísimo trabajo
Danke sehr Carina!
That looks amazing
Thank you for your positive feedback.
Excelente trabalho
Danke dir!
Trabalho maravilhoso
Danke sehr!
Нереально красиво. Фантазия таких шедевров не знает границ👍👍👍
*Спасибо за Комментарий! Можешь поделится этим видео с другими?* ruclips.net/video/jKM2ZBnTDKY/видео.html
@@STEDFLOOR صباغتاليقوت
Buenos dies si muy bien Gracias por vidéos ok
Danke für dein Kommentar!
Beautiful work mate. I just started vernitian plaster in Australia and been doing samples non stop.
What colours did you use if you don't mind me asking
PRELUDIO is a universal primer for decorative wall design, equipped with wet abrasion resistance and good permeability to water vapor. Suitable for various surfaces, such as classic and premixed concrete, plasters, plaster, wood ..
The product corresponds to the high quality!
Processing: with roll
Dilutable with water: 20 - 25 %
Drying at 20 °C: After approx. 4-5 hours
Consumption: PRELUDIO: 4-5m²/litre.
Materix 7.0 Bianco W. White lime filler for inside, with which a unique decorative surface can be achieved. The homogeneous and soft product is easy to apply and with the right application technique can perform the Roccia Metamorfica (Broken Stone Effect) and Roccia Rigata effect.
Ground Preparation: the ground must be dry. Clean the surfaces to be treated and remove loose or peeling parts. Apply one layer of PRELUDIO diluted to 25% with pure water. After about 4-5 hours at 20°C, continue using MATERIX 7.0 Bianko W. In the case of old and crumbly substrate, it is recommended to first apply a layer of deep ground concentrate diluted with pure water before PRELUDIO.
Consumption MATERIX 7.0 Bianko W: approx. 2.0-2.2 kg / m²
Materix 7.0 Bianco W - 4 liters filler in white + (120 ml Color Kit R) in black
Drying time approx. 2 hours. After that, a little water sprays on the wall and the processing becomes easier and softer. After about 24 hours at 20°C, continue with the application of Kalahari micron Alluminio 03.
KALAHARI MICRON: Consumption: approx. 6 - 8 m²/litre
With a suitable sponge, apply the glaze Kalahari micron Alluminio 03 thinly and evenly. After about 3-4 hours at 20°C, continue with the application of SHINE R-5°. SHINE NEUTRAL 00: Dilutable with water: 2-3 %. Consumption: 200-250g/m².
Mixing ratio: Mix 80 ml Color Kit R to 1 liter (1.35kg) Shine neutral 00. Then dilute with 20-30g of water and apply to the wall (see also our video instructions). Apply the Shine R-5° with a suitable sponge. After about 3-4 hours at 20°C, continue with the application of Kalahari micron Alluminio 03.
The second and last layer of Kalahari glaze! With a suitable sponge, apply the glaze Kalahari micron Alluminio 03 thinly and evenly. Drying time approx. 4-5 hours at 20°C. Ready!!!
Practical advice: the ambient temperature should be 5°C to 35°C during painting and the relative humidity of the room should not exceed 80%. Avoid direct contact with eyes and skin during application, use clean water for dilution, and store the undiluted product in a closed container in a cool and dry place. The displayed colors are used for orientation and can, depending on the char
This is very nice!
*Thank you*
That is so beautiful.
Thank you!
Wonderful respect from Egypt
Danke sehr für den Kommentar!
Мастер! Просто Класс!
*Спасибо большое!*
Bravoooo
*Thank you*
RELAXING. INSPIRING. ART.
Danke Sehr!
Awesome sir😊👌
*Thank you so much for the comment!*
@@STEDFLOOR sir please used Instagram and send all art this platform 👍
Super,Maestro!
Danke sehr!
Very nice job sir.
Thanks you
Cmq veramente bellissimo, complimenti
Danke sehr!
Die Musik ist furchtbar. Das Ergebnis echt top!
Danke!
very impressive, in this technique you used a brush to create texture. what do you call this brush ?
RIVES Spazzola mille righe - Strukturbrett 87 x 205 mm - www.ebay.de/itm/132324502040
I only sell the material in Germany. Ask for Central Company Rives - www.rives.it/
Good job
*Thank you for the frank review and thank you for coming to visit me!*
Beautiful👏👏👏
Thanks you!
Hallo. Ein sehr tolles Ergebnis👍.
Frage: Könnte man es im Abschluß noch mit Klar-oder Bootslack behandeln. Oder ist es auch für Nass Bereiche geeignet? Würde es gerne als Duschwand in der Dusche benutzen. (Direkt auf den Putz, oder als Duschrückwand) Danke😊
Hallo Gerhard, im Anhang der Link mit gebrochener Stein Optik für Nass Bereich.
ruclips.net/video/5ibwQvhr9do/видео.html
Superb!!!!!!😮
Danke sehr!
Wonderfull
Thank you
Amazing 😻
Thanks you!
Te felicito muy bueno
Danke sehr für dein Kommentar!
work of art....
Danke sehr!
Good work sir
Danke sehr!
Молодец , красиво.
Спасибо!
Какой талант это очень клёво.......
Спасибо большое!
Lugar onde compra a tinta e ainda aprende a pintar! Heuheu bom mambo
*Intensiv Workshop, Lasur- und Spachteltechnik - **stedfloor.de/intensiv-workshop/*
Wondrous!!!
Danke sehr!
Echt mooi ❤💜💛
Danke sehr!
excellent
*Thank you*
Sehr sehr schöne Optik Herr Kollege. Sieht klasse aus! Kannst was über dein Zeitfenster sagen? wie lange man für eine wandfläche ca. Brauchen würde? Grüße aus Dortmund 🙂
Hallo! Ich brauche zwei Tage! Am erste Tag soll ich die Wand grundieren und Spachtelmasse auftragen. Am zweiten Tag auftrage ich Kalahari, Shine und nochmal Kalahari. Fertig!
Супер!!!!!👏🏻👏🏻👏🏻
*Спасибо большое!*
Very good
Danke!
wunderschön! Wieblange ist die Trockenzeit? schafft man 12qm zu verspachteln, zu strukturieren und zu glätten ohne das es zu schnell trocknet?
Danke sehr für den Kommentar! Ja natürlich schaffst du 10-12 m² zu verspachteln.
- Wandfläche mit Preludio grundieren. Trocknungszeit ca. 3-5 Stunden.
- Materix 7.0 R-4° ca. 1,9-2,0kg pro m² auftragen. Nach je 5-6 m² strukturieren und weiter 5-6 m² Spachtelmasse auftragen und strukturieren. Kurze Trocknungszeit ca. 2-3 Stunden und dann bisschen Wasser sprühen und glätten. Trocknungszeit ca. 24-30 Stunden.
- Erste Schicht Kalahari micron Alluminio 03 mit schwamm auftragen und 2-3 Stunden trocken lassen.
- Schine R-5° in die Vertiefungen auftragen. Nach je 0,5-1,0 m² abwaschen und weiter genau so! Trocknungszeit ca. 3-5 Stunden.
- Zweite Schicht Kalahari micron Alluminio 03 ganz leicht nur oberflächlich auftragen. Finito!
@@STEDFLOOR vielen Dank für die Informationen 👍🏼👍🏼👍🏼
Great job
Thanks you!
How long does wax keep its shine and how to clean,can it be used in a shower room and does wax have to be redone after time
Hallo, wie verwenden kein Wachs für Dusch Bereich. Wir haben extra Wand Versiegelung. Er heißt FilmPro 1 C Lucido. Im Anhang sende ich dir der Link für das Video.
ruclips.net/video/-aL9iy4pq64/видео.html
super i love this
Danke sehr!
Salut super boulot 👍
Thank you!
Superbe ! bonjour une question doit-on le faire sur un support métallique uniquement ?cette technique m'intéresse merci🤗
Hallo, das Material du kannst auf Alu Verbundplatte auftragen. Oberfläche aufrauen, grundieren und dann die Spachtelmasse oder Metallic Farbe auftragen.
Neverovatna tehnika, fascinantno umetnička, završni sloj je pun pogodak i odličan efekat.... Bravoooo a koliko to košta.... 🤔 Veliki pozdrav 👍❤️🇲🇪🙋♀️
Danke für den Kommentar.
Гениально просто.
Спасибо!
Exelente muy bn me gusta
Danke sehr für den Kommentar. www.stedfloor.de
Очень красиво! А можно это сделать с обычной шпаклёвки?
Спасибо за оценку. Сказать однозначно как поведёт себя тот материал что вы купите на рынке очень сложно. Многое зависит от времени подсыхания продукта и его химических свойств позволяющих с ним работать поэтапно. Мой вам совет. Купите немного материала и сделайте пробный тест. Я иногда тоже так делаю.
Желаю Вам успехов!
@@STEDFLOOR спасибо Вам большое . Вам тоже Успеха и удачи . Я так и сделаю
You're a great artist👍
*Besonderer Dank für wertvolle und konstruktive Kommentare!*
This is gorgeous
Danke sehr!
Im trying to figure out how to do this , more translucent lilac base wall with a light sliver opaque overlay
Use multifinish and just aply colours sidef colours
@@comanflorin5197 For Effetto Metamorfica I use the following materials:
Primer, filler on lime base, tint concentrate for filler and shine, metallic color/glaze.
3D Boden STEDFLOOR Can you apply this to fresh dry plaster?
@@tomyates5075 No
3D Boden STEDFLOOR Should of asked that better, fresh plaster, obviously primed first?
En Argentina hay alguien q comercialice estos productos? Es un material extraordinario y ni hablar de quién lo está colocando un verdadero profesional..
Hola, estoy al por mayor para Alemania. Por favor envíe su solicitud a nuestra oficina central.
www.rives.it/decorativepaints/
Very nice, do you plaster on a piece of board on the wall or a big sheet of paper?
Hallo. This is an aluminium composite panel.
Gostei muito desse trabalho, e virei fã desse artista, tem como mandar o nome desses produtos traduzidos em portugues pra mim aqui no Brasil?
Olá, isto é, Efeito Pedra Quebrada
Também gostaria de saber quais são os materiais . Por favor 😀. Obrigada.
@@contemaisdrika2525 Olá, isto é, Efeito Pedra Quebrada
Très beau le matrix
*Merci pour le commentaire! Le Materix est un très beau produit de Rives!*
Great job....
Danke!