With the 5L variant it states dilution should be 1:200, 50ml to 1L of water. 5L should give you around 100 washes and cost me around €32/27GBP. Not sure if the smaller bottles are already diluted though.
As it was quite thick at 200ml and is very expensive per 500ml I would have tried it out at 100ml instead of going up to 300ml and costing approx £7 a wash.
@@charlieschannel4192 I was thinking along the lines that even used at 100ml per wash it would still be much better than a hose foam gun for approx £2 per wash and besides the heavier it's sprayed on the quicker it slides down the vehicle. With the economy the way it is maybe a future video on how little mixture you can use of anything decent for acceptable foam. Keep up the good work Charlie
300ml!? I'm using MAX 100ml. Have you checked the air-intake and/or less pressure in order to calibrate your foam with less product? And are you sure you need that high a ml. count in a mix with water? I mean, 50ml. of product to 400ml. water will still be enough for a medium sized car.
Around 2 washers I would skip purchasing not worth it. They should reconsider the ratio better. I'm surprised your not sponsored to test some of their products. Maybe try your look and drop some a email linking channel and ask if you can test their stuff. You never know free samples or full products your way
With the 5L variant it states dilution should be 1:200, 50ml to 1L of water. 5L should give you around 100 washes and cost me around €32/27GBP. Not sure if the smaller bottles are already diluted though.
As it was quite thick at 200ml and is very expensive per 500ml I would have tried it out at 100ml instead of going up to 300ml and costing approx £7 a wash.
😂😂
@@charlieschannel4192I'm a confused by your reply Charlie. Do you think £7 a wash is acceptable ?
I would say it's abbit pricey, had better for less money 👌
@@charlieschannel4192 I was thinking along the lines that even used at 100ml per wash it would still be much better than a hose foam gun for approx £2 per wash and besides the heavier it's sprayed on the quicker it slides down the vehicle. With the economy the way it is maybe a future video on how little mixture you can use of anything decent for acceptable foam. Keep up the good work Charlie
300ml!? I'm using MAX 100ml. Have you checked the air-intake and/or less pressure in order to calibrate your foam with less product? And are you sure you need that high a ml. count in a mix with water? I mean, 50ml. of product to 400ml. water will still be enough for a medium sized car.
Nop 😂
@@charlieschannel4192 😜
Can you buy a Halfords pressure washer and review it please 😁😁😁
I’ve use Auto Glanz Piste and it lasts me ages, I don’t think your dilution is right
I might be, but I stuck to the instructions 😂
Around 2 washers I would skip purchasing not worth it. They should reconsider the ratio better. I'm surprised your not sponsored to test some of their products. Maybe try your look and drop some a email linking channel and ask if you can test their stuff. You never know free samples or full products your way
Totally wrong dilution.