Hello, Have you connected the SATA cable with the control hub? That should already start the fans when you power on the system. If you still struggle, feel free to email us at: info@chieftec.eu
Hello, thanks for your interest in our product. The two key differences are: 1) Fans - Scorpion 2 is using Ring RGB Fans, while the Scorpion 3 uses Rainbow RGB Fans (same as our Tornado Fan set), so it's a matter of style preference. 2) Sliding Door - The Scorpion 3 uses a newer sliding glass door mechanism, while the Scorpion 2 is using the traditional 4 screws to fix the glass door. Otherwise, the two cases are the same on the inside. Hope this helps. Thanks, Martin from Chieftec
Hello, simply put the case on a solid platform like a table. hold the top of the case with one hand to keep the case in position. Then use the other hand to grip under the front panel, there should be a gap to put your fingers. Then give it a strong pull forward and the front panel should come off. Hope this helps! Cheers, Martin from Chieftec
@@chieftec_official It required some "controlled force" but it went off without issues, clicked back in without isues too. once you know how to do it, it's easy.
Hello, thanks for your interest in Chieftec products. The Scorpion 3 supports up to maximum 166mm for CPU tower cooler, so 171mm would not fit. Hope this helps!
@filip - Check out our new Hunter case :) Mesh front for better airflow as requested: www.chieftec.eu/en/chassis/atx/gamer-series/gs-01b-op-detail.html
It's a great case but I don't know how to start the 4 fans thats built in
Hello, Have you connected the SATA cable with the control hub? That should already start the fans when you power on the system. If you still struggle, feel free to email us at: info@chieftec.eu
@@chieftec_official u can't t imagine for how long i have been searching for this comment!
whats the difference between scorpion 2 and 3?
Hello, thanks for your interest in our product. The two key differences are:
1) Fans - Scorpion 2 is using Ring RGB Fans, while the Scorpion 3 uses Rainbow RGB Fans (same as our Tornado Fan set), so it's a matter of style preference.
2) Sliding Door - The Scorpion 3 uses a newer sliding glass door mechanism, while the Scorpion 2 is using the traditional 4 screws to fix the glass door.
Otherwise, the two cases are the same on the inside. Hope this helps.
Thanks,
Martin from Chieftec
How do you remove the front to clean?
Hello, simply put the case on a solid platform like a table. hold the top of the case with one hand to keep the case in position. Then use the other hand to grip under the front panel, there should be a gap to put your fingers. Then give it a strong pull forward and the front panel should come off. Hope this helps! Cheers, Martin from Chieftec
@@chieftec_official
It required some "controlled force" but it went off without issues, clicked back in without isues too.
once you know how to do it, it's easy.
@@chieftec_official THX, this should really be in the manual!
No problem anytime. =) @@Andriej69
Крутой корпус!
Побыстрее бы появился в продаже в России!
Это на пути! Скоро он будет доступен в России!
can you sell just the fan hub
cause i boutgh your fans and they didnt come with a fan hub pleas make it so we can buy fan hubs on its own.
Есть такой-же, только 2 версии, думаю брать 3
Влезет ли башня термалайт с 171 мм высотой?
Hello, thanks for your interest in Chieftec products. The Scorpion 3 supports up to maximum 166mm for CPU tower cooler, so 171mm would not fit. Hope this helps!
Nice but you should make a mesh front for better airflow
@filip - Check out our new Hunter case :) Mesh front for better airflow as requested: www.chieftec.eu/en/chassis/atx/gamer-series/gs-01b-op-detail.html
май корпус))
Хороший