Development of Surface of Pyramid_Problem 1
HTML-код
- Опубликовано: 18 сен 2024
- Download the Manas Patnaik app now: cwcll.on-app.i... The development of lateral surface of pyramid consists of a number of equal isoceles triangles in contact. The base and the sides of each triangle are respectively equal to the edge of the base and the slant edge of the pyramid.
My Affiliate Links:
My Samson Go Mic: amzn.to/2xgE0qR
My Wacom Writing Tab: amzn.to/2xh8FEv
Books I refer: amzn.to/2xe550a
amzn.to/2xgbJ3E
amzn.to/2jJOMmf
Today is My BE Ist sem exam.And i have studied the entire subject from this channel.I used to think its quite hard to study this subject but you changed my Mind and all of my concepts are clear now by watching the videos here.Thank You sir
Hasheem, I am glad to know that my lectures have benefited you,
And i am sure u gonna do excellent in exams......
All the best man...
God Bless....
Your btech might have been done now😅
@@_thepoeticbubble It is done😀
bhadwe tujhe auto cad hai phir bhi rora, hamein paper pe banana hai madarchod nemesis prime
You got placed?
such a professional way of teaching , really really appreciate your work....not even our IIT professors could teach better than you.
Your videos are so helpful sir and I always recommend this to my friends .never afraid of exams just because of your videos...sir
Hi Arjun....Well Thanks for appreciating my work...
All the best in life
And if you wanna support my channel visit this link: manaspatnaik.in/?page_id=401
Small contributions can make a Big Difference
👍👍👍👍👌👌👌✌️✌️✌️
This who are watching in 2020 carona time 🤞😂
Meehhh😂😂
I have exam today and I used Sir's channel for last two days ,I understood everything just a bit nervous hopefully I will do well
sir one question is that why we had drawn the true length separately .....why the front view we draw earlier doesn't represent the true length of the slant edge?????????????????
plz replay.........
This is addressed at 4:52
because if u see the front view the triangle is inclined at some angle .so,obviousely the lengths gonna diminish
manas, your videos are the best, you really help thriving engineering students like me with drawing, keep up d good work
Sir your teaching is very nice👌👌👌
This guy made toughest into simplest,hands off
Really good sir!!Taking time and patiently explaining each and every step.Hats off to you!
Hey Nikhil.......Thanks for appreciating my work....
All the best in life
I have also started making lectures on engineering mechanics
Do check it out on my channel page...
Do share and recommend this channel to your friends and classmates so that they can also benefit...
Cheers....
I'm completely ready for my sem1 examinations sir...! Thank u so much for all Ur engineering drawing tutorials! All are really excellent! I really appreciate your teaching and we r expecting more tutorial videos from u sir😍 thank u once again!
All the very best
Stay blessed ☺👼
Its 2024 and your videos are still amazing thank you so much sir🎉
Ohk . But how are we supposed to draw the part P? What are the measurements?
This video really helped me a lot.
(Use of AutoCad for explaining rather than a drawing book is great idea)
Thanks a lottt for creating such content
its almost the end of my fe sem2, this video cleared my concept :)
a huge thumbs up sir.
Thanks Prathmesh for appreciating my work..
All the best and do tell your friends about this channel so that all can benefit...
Architecture just got easier thanks to you
How do we know where to take 45° angle if the figure isn't given?
Every thing is good but they had no given the height of the pyramid...
How can we draw a pyramid without knowing height...
Since you are doing in PC the image will be there..
But how can we draw it on paper???
0:38 Check the top of the video.
your literally saving my ass from my caed teacher who hates me thank you manas for making caed a piece of cake
Really appreciate your efforts
very good explanation thank u very much
Thanks Vamshi for appreciating my work...
Do encourage your friends also to subscribe and learn from this channel.....
All the best in life....
Nice it will help many students like me
No words this was phenomenal❤👌👌👌
Sir make one video on development of tetrahedron .
ya sure
You explain it very simply to understand
Thank you 💓💯💥
You're welcome 😊
Sir this has been really helpful. so can you do it for oblique pyramid too?Cuz in exams they don't asks this cuz its comparitively easier.
Thanks for appreciating man.........
Ya sure i will put that up in my "to do list"
All the best......
And do encourage your classmates to subscribe to this channel so that all can learn Engineering Drawing in the best possible way.......
This is very help full for me....Thank You Sir
Hi Gajendra.......Thanks for appreciating my work....
All the best in life
I have also started making lectures on engineering mechanics
Do check it out on my channel page...
Do share and recommend this channel to your friends and classmates so that they can also benefit...
Cheers....
Thank u so much sir for a good video
Hi........
I am sure, this channel is helping you learn.
All the best and do let your friends know about this channel so that they can also benefit....
this is awesome it helped me allot.
thank You so much
Vikas.......Thanks for appreciating my work....
All the best in life
I have also started making lectures on engineering mechanics
Do check it out on my channel page.....
Do share and recommend this channel to your friends and classmates so that they can also benefit...
Cheers....
Manas Patnaik thank you.. Sir
The videos are too helpful..
I am thankful to u sir
@@ManasPatnaikofficial Your videos are really good sir,but sir you dont clear the doubts asked in the comment section although you encourage us to ask doubts in the videos.Please try to give some of your precious time in doubt clearance,that would be a greater help sir.Thank you .
Sir your video is very helpful for studying....nice work sir...do more videos like this.😊you get more blessings from God for your work...thank you so much.your video is easily understandable..
thankyou .. your video was very helpful to me really
You are welcome Heefa...
Thanks for appreciating the content.....
All the best in life........
Do watch all the content thats useful to you and also encourage your friends to subscribe to this channel for top notch learning...
Sir What's the axis length.....as we have to draw front view frm top view....
Bhai top par diya hua hai 40mm
thanks so much
Please solve one for complete surface development of triangular base pyramid too
Superbly explained indeed great help... 👍
Please make the same video on oblique solids
This is very helpful thanks a lot
+Yasantha Wijebandara
You are welcome....
All the best
And do let your friends know about this channel so that they can also benefit
Thank you so much sir u r great😊😊 this is really very helpful 😊
This is very helpfull for me thanks sir ☺️🙂
Why do we need to draw a curve from centre and radius 31.why is it necessary
Sir do some difficult problems
How to the same process with an oblique pyramid the apex not at the center
Query:-
What is the angle and distance from the axis where the triangle is cut? isn't given.
Good work
Thanks for appreciating my work.
Topic-wise Playlist of Engineering Drawing / Engineering Graphics in English
1. Orthographic Projection: ruclips.net/video/WG6H2pISUzQ/видео.html
2. Projection of Point: ruclips.net/video/fK4h5gM73w8/видео.html
3. Projection of Line:
OLD:
ruclips.net/p/PLIhUrsYr8yHz_FkG5tGWXaNbIxVcibQvV
NEW:
ruclips.net/video/pzE0D-Ijxd4/видео.html
4. Projection of Plane: ruclips.net/p/PLIhUrsYr8yHx7TVB51jN3HZVyW3R6RiBg
5. Projection of Solid: ruclips.net/p/PLIhUrsYr8yHxARPzEFz1nXgt8j6xF_tEm
6. Section of Solid: ruclips.net/p/PLIhUrsYr8yHwAbiCATZUbzd_CpF0EHF3v
7. Development of Surface: ruclips.net/p/PLIhUrsYr8yHwdB96ft6c0Uwc4SDCLuG1v
8. Auxiliary Plane: ruclips.net/p/PLIhUrsYr8yHxHWk2TCg1SrphF1vKpHXoB
9. Interpenetration of Solids: ruclips.net/p/PLIhUrsYr8yHyTGceE1TGhCSxxfHyFpnNM
10. Isometric Drawings: ruclips.net/p/PLIhUrsYr8yHxVky7bfrnbRcdXcHjT_K83
11. Conic Sections: ruclips.net/p/PLIhUrsYr8yHx0TuqsY0FUZ7Z24BbKxJoQ
12. Cycloidal Curves: ruclips.net/p/PLIhUrsYr8yHwwA8eBea78pJW1lw9XAv6z
13. Involute:
ruclips.net/p/PLIhUrsYr8yHzu8pqYvGwQoJKVpuS1Jusa
14. Plain Scale and Diagonal Scale: ruclips.net/p/PLIhUrsYr8yHwTgo_zu_ELqOC1ypcp5Gr9
15. Complete Engineering Drawing in one single Playlist: ruclips.net/p/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS
Topic-wise Playlist of Engineering Drawing / Engineering Graphics in Hindi
1. Orthographic Projection in Hindi: ruclips.net/p/PLIhUrsYr8yHy3chHVzYA4BMbY9DbhyYSY
2. Projection of Point in Hindi: ruclips.net/p/PLIhUrsYr8yHwinNUxVA1NW0xxLRlDfINH
3. Projection of Line in Hindi: ruclips.net/p/PLIhUrsYr8yHyvWb87YtG3A3jDEnChgzir
4. Projection of Plane in Hindi: ruclips.net/p/PLIhUrsYr8yHxj9N5e1oZA0x_k5ZVssf3U
5. Projection of Solid in Hindi: ruclips.net/p/PLIhUrsYr8yHylYPjrulRGm8DSPiimxP3P
6. Scales Hindi-Urdu:
ruclips.net/p/PLIhUrsYr8yHzJA426HjlEmiRqUkJTkozB
Topic-wise Playlist of Engineering Mechanics / Applied Mechanics / Fundamentals of Mechanical Engineering in English
1. Forces:
ruclips.net/p/PLIhUrsYr8yHzoyUutEK57JzWy1n-vxIS0
2. Friction:
ruclips.net/p/PLIhUrsYr8yHwY1TDraJpyYkU8Zug-kM4m
3. Shear Force and Bending Moment: ruclips.net/p/PLIhUrsYr8yHy1lc0hEhbpEAGsGwNmUWt7
4. Trusses:
ruclips.net/p/PLIhUrsYr8yHwIXEt9cqjEsEO8l83xcIf7
5. Centroid and Centre of Gravity: ruclips.net/p/PLIhUrsYr8yHzZ52dVA3wQ_0IQVl7CKL7p
6. Moment of Inertia:
ruclips.net/p/PLIhUrsYr8yHw8qWxAVOx-5Y2XfGPOmcDy
7. Dynamics:
ruclips.net/p/PLIhUrsYr8yHwOZxmY63A_lURu6c-jNk-z
8. Complete Engineering Mechanics / Applied Mechanics in one single Playlist: ruclips.net/p/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS
This video really helped me out. Can you please tell me what software you used in this video ?
Thanks sir so much ! Really amazing video 👏👍👍
Its nice...but plz make top view part also..it will make easier for us
Hi Apil.....
I am sure that these videos are helping u learn...
Keep watching and do let your friends know about this channel so that they can also benefit................
Manas Patnaik ya sure I will recommend this video..this made me quite easier to understand...plz add the hexagonal pyramid with top view after cutting the plane😊😊
Sir i have a doubt that there didn't mentioned the distance or angle from co planar axis to a¹, b¹&c¹, d¹.. Sir how u drawn it without mentioning the distances.. And why you projected 3¹ to co planar axis.. Plz respond and give me answer
very helpful
Sir please draw for pentagonal pyramid resting on one of its side on HP
Many many thanks to you sir
Thank you for this. I have my paper tofay an di wasn't really vlear onnyhe topic. I'll write and bring back feedback.
All the best
I am watching it , even in 2021,
Really helping
Sir,I'm one of the fans of yours.Could u please upload INTERSECTION OF SURFACES.
In this question , how we know about the altitude of square pyramid.. the question also haven't mention about its length .
That was really helpful Sir
Thank You Sir
Hello Manas, may i ask you on helping me solving a specific surface development problem?
Send me the problem description
Awesome sir!!
Thanks Utkarsh for appreciating my work...
Do encourage your friends also to subscribe and learn from this channel.....
All the best in life....
Manas Patnaik sure sir... You saved my Engineering Drawing exam 😂😀
Thank u Soo much sir. It's really helpful ..
Sir plz form the front view top view and develop surface of hooper
Sir can you tell me height in which the axis is cut???
Sir i have a doubt . You can draw solution also in the question using square pyramid diagram but how I can draw sol in exam hall
Sir why o'a' in the front view cannot be the true length of slant edge
thank you sir..its helpful..
very nice
You are welcome ashok...
Do watch all the content on drawing and mechanics.....
And do tell your friends about this channel so that they can also benefit.....
All the best
Why r we finding the true slant edge in cube pyramid alone🧐
At what height is the plane cutting the pyramid??
sir thank you thank you so much ,sir are you civil engineering student ☺
No...I am a Mechanical Engineer..........
👍thank u so much sir
Hi Dheepa......First of all....Thanks for appreciating my work....
I always focus on giving you guys excellent quality free education....
All the best in life and do let your friends know about this channel on drawing and mechanics so that they can also benefit....
Genius Sir g
Ur video are really good..... excellent.....the only problem is that ur accent irks me.....😂
Sir, can you please tell me what software you used in this video
Awesome sir
Thank u
Thank you very much sir
Sir u are not considering the base why
why you are making arc for c and d by making length on the line which does not shows true length but for a and b you are doing it by making the line of true length why??????????
Sir, If you put some presentation of Tray, funnel etc
I will try
Thank you
Thanks u so much sir
sir, in this question o'3' is the true length in front view then why the process of true length has been taken?
i think there is a mistake
no man only two edges are seen so it can't be true length... if 3 edged age seen then it would be true length,third edge passing perpendicularly down from point O'
yes i understand thank you
@@mausamrajbanshi3192 Why is it so?? Sir.
Very useful
thank u verry much sir it helps me alot
Hi Rintu.....
Thanks for appreciating the content...
All the best and do let your friends know about this channel so that they can also benefit....
Sir please teach us a problem which involves 2 cutting planes 🙏🙏
Sir how are you adding text so quickly in autocad?. I want to know how are you doing it. My exam is in autocad and it takes alot of time in adding text. Please tell me how to do that
What is the need of marking true length as it is parallel?
George Listen to this description very carefully at 4:50
Why is true length necessary ?
Thanku sir it is very supporting to teach engineering drawing
Hi Anuj.........
I am sure these videos are helping you learn the concepts...
All the best and do let your friends know about this channel so that they can also benefit.....
Sir i did not understand why O'3' is not the true length
Sir axis se kitne height pe angle lena hai? Plz tell sir.
Sir can u explain how can we get slant edge of the true shape
I didn't get u 🤔
Thank you so much sir,.. I was the most joyful person in the world once I say u explaining this topic
sir.. what is the main reason for calculating the slant edge?
Sir, you haven't mentioned any dimension except Square edge, how can we draw it really ?
helpful
Thanks for appreciating my work Abhiram.......
Do watch more videos on Development of surfaces..
All the best man
And do encourage and recommend this channel to your friends...
sir i looooove your videos! ED Hero you are really!
sir what application are you using here in your windows system? please do tell me
Hi Girja.....First of all....Thanks for appreciating my work....
I always focus on giving you guys excellent quality free education....
All the best in life and do let your friends know about this channel on drawing and mechanics so that they can also benefit....
Thats AutoCAD old version...
Manas Patnaik
thanks you sir!
And my whole class is your subscriber!!! of 96 peoples
+Girja shanker Dwivedi
Which college are you guys from?
Manas Patnaik
OMG! dear sir,
autoCAD is a paid app!!! how can i get it for free?
sir i am from Jabalpur, Jabalpur Engineering college,1st year....
but please tell what should i do to get autoCAD?
Manas Patnaik
OMG!
dear respected sir,
autoCAD is a paid software! please tell me how can i get it for free?
i am from Jabalpur,MP.
Jabalur engineering college., 1st sem.
but please, do tell me how can i get it for free?....
Hello Sir, why we don't take true length in Pentagonal pyramid?
Anyone please help tmrw I m having exam!!
How to develop lower surface of pyramid?
How do we get 3'1'
HOW TO DEVELOP SURFACE OF SQUARE PYRAMID WITH AXIS IS OFFSET FROMCENTRE