Mazda 6 2.2 Skyactive Map Sensor test and change
HTML-код
- Опубликовано: 26 сен 2024
- In this video I am showing you how to test and change Mazda 6 2.2 Skyactive Map Sensor
#mazda, #mazda6, #mazda6mapsensor, #mapsensorfix #skyactive #mazdaskyactive, #thefix #carfix #carslover #carshow #mazda62.2deisil
I’ve found copy eBay sensors to be a touch and go thing. Testing the sensor is very important 👍🏽
Thank you for your tips and honest advice 🙂
Very well explained. Many thanks.
I have a value between 4 & 6/7 for both of them when Ignition On without acceleration, is it normal ?
Hi. What is the scan tool you are using that shows the desired value? What scanners can do that? Thanks
Hi I am using thinkdiag
I like your videos Sir,very clear and direct to point. Where are you based Sir? tks.
Hi I am based in East London
Hello my map sensor when connection unplugged reads 320kpa, also if connected it reads 98kpa those readings all with ignition on engine off. I've changed 2 sensors thus far same thing got technicians to test the connector says its fine?? Idk what else to do. I'm getting low boost turbo charger A. This the only thing I see as a issue plz help me😢. 2014 Mazda atenza 2.2d
Verify that the MAP PID (pressure) and barometric pressure are practically equal,🤐
Hi thanks for this,
I got a new OEM bosch sensor but the kpa still read 10kpa and only goes up to 18kpa when revving engine. I checked the wires with multi meter as you showed and the one of the wires (signal I think was only 3v) so I know it's a wiring issue. Unfortunately that goes beyond my knowledge messing around with PCM. Is it likely to be an issue with thr PCM or physical wiring issue (broken etc).
Many thanks.
Without this video I would have been buying new senors like you said
How you fix your problem?
Thanks for answer
Hello, did you fix this
@@jackdaniels3728 if do you have friend with same car use him sensor and check scan(live date) how throttle body working ....i bought second hand £10 maf sensor and my car is ok
Welchen Nummer hat den neue Sensor von Bosch 261230318 oder 261230319
@paulsamways1716 Did you managed to get it fixed? I'm having the same issue and got the bosch sensor 261230318 and it's still 10kpa
Hi there just found your 2 vids on exhaust pressure sensor and this one. I'm wondering what software are you using on your mobile to check the fault codes etc please? Thanks
Hi I am using thinkdiag
Thank you 🙏