It could be good to see a review video, how it works, the experience of use, and the settings that could be made with it (for example, how locked the lock can be left), very good video
Hi, Vlad. I cant configure the first bluetooth connection with mi home app. Can you help me? In this video, your lock are connect with your app in mobile. I try Android and Iphone apps, but my door lock dont appears in phone bluetooth or in app. I need your help. Please.
Have you followed the instructions in the app? Follow the steps there to put the lock in bluetooth connection mode, also just in case check to see if you selected in the MiHome app the country as mainland China, only that way Will you find the lock in the list of devices.
Hi Vlad, thanks very much for the nice video, when I change the location in my app it sign me out and then when I sign in I lose my other devices. Is that normal ?
mr valad, i’m very need your advise about setting at the last of this doorlock, when use emergency key, i cant finish that setting, n got frustrated 😤, can you help me sir
Hi! Yes, that happened to me also. The small digital cylinder is broken, or the cable connecting it to the main lock. Meaning the system doesn’t detect you locking/unlocking. The lock still works. You can exit the setup and just go an define a user with a fingerprint/password without following the auto-setup.
Lia Selvia it means you did not remove the pin in the door mechanism. I explain in the video that you need to remove a tiny screw (that is facing the outside). M
Hi lia.. do you speak bahasa? I do have a problem to install it. Can you give me some advice to install it successfully? Or give me the steps to install. Thank you
@@ceritanamia halo mbak lia... masih mbak. Ak kemaren uda nnton video-nya vlad. Ternyata ak salah yg soal nyopot sekrup kecil yg di dalem as dalem. Harusnya itu yg dilepas cuma 1 yg bagian handle pintu luar ya? Yg dapet pintu dalem ga dilepas ya? Trus td ak coba pasang lh itu sekrup-nya malah jd ambyar kuncinya. Huhuhu... Ini jadinya ak beli lagi. Ada tips and trik atau step2 masangnya biar lancar dan berfungsi baik ga? Makasih mbak lia.
Ernest lim hi! Sadly so far this lock can only be used with the mi home app, but since there are xiaomi products already homekit compatible I guess it’s just a matter of time until this one will also be supported.
Azmie Faizal Aizam Mohammad hi! Yes, you can change the voice volume and language to english. In the mi home app, after you have added the new smart device (the door lock) you can go to settings and change the language from chinese to english.
Влад, здравствуйте. Не получается настроить этот замок в приложении Mi home. Приложение видит его, я выбираю и следуя подсказке на картинке зажимаю на 3 секунды кнопку под батарейным отсеком. И дальше ничего. Женский голос что-то вещает из динамика замка. А в приложении - ничего. Хотя должно выпасть поле для ввода 6-ти значного кода. Хочу уточнить, что замок пытаюсь настроить напрямую, без шлюза. Захожу через шлюз Xiaomi Gateway 3, там такого замка нет. Может быть, нужен Bluetooth gateway и в его меню есть такой замок?
Daniel Marques yes you can, there are screws on the inside of the lock that allow you to change direction of the opening, also the mechanism can be used on either side to open, just need to remove the right pin
Hi. I had the same problem with my emergency key. I broke the connection. Can I ask you where you bought the spare set of keys?it will save my frustration. Thank you.
Bro. Would you know the maximum door thickness that can be installed on? I’m worried since most door locks has a max door thickness of 80mm whilst my door is 85mm thick.
Not water proof, in the settings it says working environment of max 93% humidity, or so i found in the manual. But it doesn’t say anywhere it’s water proof
Hi @Vlad, i have an Essential Mi Smart Door. From your installation video, the operating mechanism appears to be the same. I already installed the lock, and now I can't open the door from the outside with a password or bluetooth. After authenticating, I no longer hear the port mechanism working in the background. Would you help me?
Hi, my lock has been working fine for months since i installed and followed your video instructions. Thanks! It suddenly had issue there notification says 'main door lock tongue does not pop up'. May i know any suggestions on how to fix it??
Manmeet S can you check if the door works when you have it open? I had the same issue, not with the door part, but with the wall part. The plastic that it cane with was blocking the tongue from opening fully. Worth a try to see if it’s the same issue
Hallo i have trouble, the message like this "the main lock tongue does not pop up" how to fix it? I already fixed the blue bolt, and the doorlock work properly, but if i close the door, the alarm always on and i have message at apps the main lock tongue does not pop up
Means the door is not Closing properly, i had the same issue with the plastic protector for the door tongue, true removing it and see if it closes, or see if you wall hole is deep enough allowing the lock to fully close
Xiaomi doesn’t sell any spare parts separately. The only service they offer is in china, you can schedule a repair via the app. If you manage to go to china that is...
Hi vlad, i had the same problem faced with avac23 which the door sounds open with fingerprint or password however the lock did not open from outside, can you figure out what's the problem?
Hi vlad.. i found you are the only one who gave us very useful guidance about this smart lock. I already followed yr instruction including remove the right side of the small screw, put the square black metal at both side, registering my finger print at the mi home app, but still i can't open it from the outside with my fingerprint. No red light at the screen and it sounds like it tries to open but the tongue just didn't react. Could you tell me what probably went wrong. Am so curious. Thank you, you're being helpful so far🤗
Sylvia Marchia it could be something with the mechanism, make sure it’s plugged in properly. Did you go through the steps when you set it up? Or send me a video of what’s happening.
stephen vassallo if you see on your screen just before you try to open it says your main tongue does not pop up. Means you need to check on the opposite side of the door if there is enough space for the door to lock properly. Try removing the plastic casing
mu fazain putting it back won’t fix the issue, that means you shouldn’t be able to open on both sides... Anyway, try to take a short video of what’s happening
gASTbbi it should work. Just make sure the door thickness is fine and if it’s a wooden door, you find someone good to cut to the right size(inside the door). I did it myself and I must admit, it could have been cleaner.
Hi, @@sgubylik! I have an Essential Mi Smart Door. From your installation video, the operating mechanism appears to be the same. I already installed the lock, and now I can't open the door from the outside with a password or bluetooth. After authenticating, I no longer hear the port mechanism working in the background. Would you help me?
Pedro Henrique Siqueira can you check if all the cables are connected properly and don’t have any visible damage? Did you also finish the full installation walkthrough?
Thanks for the video! It was very usefull! But we still have a problem and I don't know if maybe you can help us. Everything it's already working, we configured the door to push from outside and pull from inside, it's not already opening from outside with out entering the key. But we have to use the key to open the door from outside, it's not working the fingerprint or the numer key (that is already configured with the app). When I put my fingerprint it make a sound trying to unlock the door but nothing happens, the same with the key number. Do you have any idea of what is happening? I have another question. How do you broke the cylinder? Because in the video I don't see that you forced something, maybe that is happening to us and that's why the mechanism with the finger print and the key number it's not working. Thanks!!!
Avac23 if you broke the cilinder like I did it simply won’t tell you when you left the door open, it should still work. Did you remove the pin/screw that I was talking about? Can you send me video of what’s happening when you are trying to open it? What could be is the mechanism in the door, make sure the connector is pluged in properly. Also did you cut the the piece that turns the lock mechanism?
xiaomi mijia u m2 push pull Preobrel miracle this lock singly connected via Bluetooth and that's it. Stopped connecting in the future, writes the connection is rejected by the subscriber. I can't configure it, all the settings are factory-set. I don't know what to do at all. Mi home prog does not see the lock because it itself does not connect to Bluetooth with phones. I try to connect there is a connection and as a result writes the connection is rejected by the subscriber. That is, by the castle itself. Settings zbrosil until zaaoda with button reset. A beep sounded, and something spoke in Chinese. But with Bluetooth, the question was not removed. What to do?
I already installed this lock. Fingers map, password, child lock working good. But anti lock switch not working. I turn anti lock switch to horizontal position but the lock can open from outside by fingers or password. I had checked anti lock limit switch inside the lock no problem. Now i don't know why. Please help me this case. Thank you.
@@suriawansubroto9247 hallo bro, are you from Indonesia? I am just wondering if you ever installed this xiaomi door lock? Please be kind to reply, thanks
Hi vlad.. You inspire me to buy this mijia smart door lock... Thanks for video... By the way, instead i have trouble on instalation.. You will help me.. Right???
@@Fahmyhabibie hallo bro, have u installed yours? I've bought a new one, but i have no confidence to install it yet. Please, be kind to reply. Btw, I am from Indonesia too. Thank you very much 🙏
Good day. Who can advise on NFC connectivity? With what applications can I tie a smartphone to the lock to open it through NFC. Must there be a smartphone from Xiaomi?
Hi, I bought this lock it should arrive in 2wks, but the company that is making the door needs to have the dimensions in order to start making them. Does anyone have the dimensions of the lock?
@@sgubylik the dimensions of the part that goes inside the door, thickness, depth, height, and dimensions of the part that is visible on the side when you open the door! Thanks
Bro... Now i have problem when setting with my phone... I messed up when try to setting finger print... I want to restart setting... Do you know how to reset the door setting... Because now i cantik connect to the door lock... 😭😭😭
Hello, Vlad! I have done everything as you showed on the video, but have the same problem as many of people - the lock does not open from outside with the password. Also It does not open from the app, only opens from inside. Thai is the solution?
Hello vlad, i just install this xiaomi push pull smart lock, everything goin well, already move the screw pin on the outdoor side, so i just can open the door directly from inside/indoor, the problem is, i put my password or fingerprint it sucess but i cant open the door from outside/outdoor.. can u help me what the problem is it ? Thanks vlad.. btw i like every detail u explain here.. it so helpful..
audhy darmayo hi! Do you hear the mechanism working in the background after you type the password? Check if you have the door black piece connected to the inner door mechanism with the small square bit you cut (check out min 4:29, the piece I drop on the table), if you’ve got all those put together then it should work just fine. If it still doesn’t work try to take a video and sent it so i can see what’s happening.
Vlad hi vlad thanks for replied, all done bro.. the black piece already connected and there is an arrow to make sure when u install it in the right way, so now i know how this smart door working, all good thanks for ur attention.. have a blessed day bro..
Hi there... audhy and vlad.. i have the same issue with audhy. Already install everything and unscrew the tiny screw on the outside side. But still can’t open the door from the outside. I try to fixed the black piece and it’s already connected too. When i try to re setup the app told me that the door lock status is incorrect. Detected that the main lock tongue did not pop up. What is that mean? And ant suggestion what should i do? Thanks
Salut,Eu cred ca era mai interesant daca aratai cum ai montat-instalat"jucaria"pe usa.Asa timp de 12 min si juma am vazut doar o asamblare si programare.
Danut Chelner instalarea pe usa e exact ca orice yala normala. Sincer eu am avut probleme cu asamblarea si programarea. Tutorialul e facut sa acopere lipsa unui manual de instructiuni.
Salut! Foarte bun tutorialul urmeaza sa imi cumpar si eu zilele astea acelas produs aveti idee daca se poate configura in limba engleza din aplicatie sau trebuie neaparat China Mainland?
I cannot open it using one-time password. Does anyone have the same problem ? And mine seems to be very noisy when locking, is it the normal behavior ?
@@ndangthieu let me give it a go and see if it works for me. Did you connect to your lock via the miapp and bluetooth when you generated the one time code?
Доброго дня. Кто может проконсультировать по подключению NFC ? С помощью каких приложений можно подвязать смартфон к замку для открытия его через NFC. Обязательно должен быть смартфон от Xiaomi?
Hi vlad, thanks for the video but after the installation I had a problem with the locking system. It wont lock properly and it can be opened without any pin or finger prints. Does anyone ever encounter the same problem? Very similar to this video ruclips.net/video/OiJCmsm2CBQ/видео.html
Vlad, this video saved me a lot of trouble! Thanks for putting it together!
Can be left or right side of the door? Thank you
Thank you very much for this video, we were able to set it up properly. I was looking for English manual and there is none. Glad I saw your video!
Does it fit on a door with 18cm thickness ?
Hello which app You use for the doorr?
Can you tell me what app to connect from smart lock to smart phone?
Thanks
my door is push to open , so i need to remove the nut facing inside or outside , Thanks
Hello I have the new model but is only in Chinese, any help or user manual in English or Spanish? The model is smart lock pro
Hi Vlad thanks for the video! Is the app for the lock setup and config fully available in English?
Your videos help me a lot. Thank you very much for making it!
Thank you very much, it gives me more confidence to install it myself.
Does it connect with amazon Alexa and can this work in the USA or only in China ?
Only the Mi app, and no cloud connectivity. It can work anywhere
It could be good to see a review video, how it works, the experience of use, and the settings that could be made with it (for example, how locked the lock can be left), very good video
Sure, I can post another video showing how it works. Regarding the settings, there’s not much room too experiment, pretty standard.
It would be good if you have a a video of what do you do if you accidentally deleted the device from the paired app.
Hi, Vlad. I cant configure the first bluetooth connection with mi home app. Can you help me? In this video, your lock are connect with your app in mobile. I try Android and Iphone apps, but my door lock dont appears in phone bluetooth or in app. I need your help. Please.
Have you followed the instructions in the app? Follow the steps there to put the lock in bluetooth connection mode, also just in case check to see if you selected in the MiHome app the country as mainland China, only that way Will you find the lock in the list of devices.
For people who have this lock. Does door lock itself when closed for a period?
It’s immediate locked when you close the door.
Hi@@sgubylik , can this auto locked mechanism set to off?
@@MrSuckstar no, this can't be turned off, or I haven't found a way to do it yet
Can I add and delete user without being at home ? Thank you.
You need to connect to the lock to pass the new info, so yes you need to be home
Hello. Does this lock only work with this lock body or does it work with other lock bodies? Thanks
Bruno Cardoso the lock body connects to the door unit. So it works only with this lock body.
@@sgubylik HI , what is the lock body thickness? is it 24mm? i am trying to fix it in my 33mm door. Can it be done?
Hi Vlad, thanks very much for the nice video, when I change the location in my app it sign me out and then when I sign in I lose my other devices.
Is that normal ?
Not really, could be something with the app, try to reinstall it on your phone
mr valad, i’m very need your advise about setting at the last of this doorlock, when use emergency key, i cant finish that setting, n got frustrated 😤, can you help me sir
Hi! Yes, that happened to me also. The small digital cylinder is broken, or the cable connecting it to the main lock. Meaning the system doesn’t detect you locking/unlocking. The lock still works. You can exit the setup and just go an define a user with a fingerprint/password without following the auto-setup.
@vlad thanks sir, i Will try your advice, but if i cant finished, can you help me again sir?
@@renramultipersada6455 sure!
@vlad thanks sir, your advice is very helpfull, i can use the door👍🏼👍🏼👍🏼🙏🏻🙏🏻
Why after i remove the pin, i cannot open the door cause the mortice doesnt work,and even i press the code. To unlock
Hi Vlad.
Why the door can be opened from the outside without pin or fingerprint? In the mi home app, it is said that the door is locked.
Lia Selvia it means you did not remove the pin in the door mechanism. I explain in the video that you need to remove a tiny screw (that is facing the outside). M
Vlad I have watched all the videos and I have done all the steps you did. Now my door lock is working properly. Thanks Vlad.
Hi lia.. do you speak bahasa? I do have a problem to install it. Can you give me some advice to install it successfully? Or give me the steps to install. Thank you
@@tommyindra12 halo mas.
Masih ada kendala kah buat pasang smart lock nya?
@@ceritanamia halo mbak lia... masih mbak. Ak kemaren uda nnton video-nya vlad. Ternyata ak salah yg soal nyopot sekrup kecil yg di dalem as dalem. Harusnya itu yg dilepas cuma 1 yg bagian handle pintu luar ya? Yg dapet pintu dalem ga dilepas ya? Trus td ak coba pasang lh itu sekrup-nya malah jd ambyar kuncinya. Huhuhu...
Ini jadinya ak beli lagi. Ada tips and trik atau step2 masangnya biar lancar dan berfungsi baik ga? Makasih mbak lia.
Hi, is the smart lock can support Homekit?
Ernest lim hi! Sadly so far this lock can only be used with the mi home app, but since there are xiaomi products already homekit compatible I guess it’s just a matter of time until this one will also be supported.
Hi vald what is app name? Can i download from app store apple? What is the minimum door width? Tks before
Hey vlad thanks for the video, its super helpful. Just check do you know why my door always says that the main lock tongue doesnt not blabla
Me too. How to fix it? Do you know?
does the voice prompt can really change fro chinese to english?
Azmie Faizal Aizam Mohammad hi! Yes, you can change the voice volume and language to english. In the mi home app, after you have added the new smart device (the door lock) you can go to settings and change the language from chinese to english.
Влад, здравствуйте. Не получается настроить этот замок в приложении Mi home. Приложение видит его, я выбираю и следуя подсказке на картинке зажимаю на 3 секунды кнопку под батарейным отсеком. И дальше ничего. Женский голос что-то вещает из динамика замка. А в приложении - ничего. Хотя должно выпасть поле для ввода 6-ти значного кода. Хочу уточнить, что замок пытаюсь настроить напрямую, без шлюза. Захожу через шлюз Xiaomi Gateway 3, там такого замка нет. Может быть, нужен Bluetooth gateway и в его меню есть такой замок?
У нас такая же ситуация, как вы ее решили?
@@Mike13-g8k Михаил, наверное, это я Игорю, вашему знакомому, замок настраивал
вы решили эту проблему?
@@Eskvaeyr нет. Я просто помогал настроить
Can you setup the lock to open from right to left in the outside?
Daniel Marques yes you can, there are screws on the inside of the lock that allow you to change direction of the opening, also the mechanism can be used on either side to open, just need to remove the right pin
@@sgubylik do u have a video on this?
Mohd Wahidin ruclips.net/video/0Ov7rXOWOSo/видео.html minute 8:00
Hi Vald, i broke the lock as well, may i know how do you purchase the replacement or maybe you can send me the link
Hi. I had the same problem with my emergency key. I broke the connection. Can I ask you where you bought the spare set of keys?it will save my frustration. Thank you.
You can only exchange the broken one via the xiaomi warranty. I wasn’t able to find the cylinder by itself.
Bro. Would you know the maximum door thickness that can be installed on? I’m worried since most door locks has a max door thickness of 80mm whilst my door is 85mm thick.
Ronald Saiyang this model
Supports doors 40-120mm so you should be good.
Vlad thanks heaps bro.
would you please Sent me the manual for mobile to lock connection
How water proof it is? Can I use it outdoor?
Not water proof, in the settings it says working environment of max 93% humidity, or so i found in the manual. But it doesn’t say anywhere it’s water proof
Hello may i ask if how can i reset the lock? Is there any default passcode to factory reset it? Thanks
You don’t need a code to reset it, just remove it from the mihome app and restart the installation
From the video, you push the handle to go in. When you are in the room and want to exit the room, you would pull the handle. Is this correct?
Watha Suteesopon depends on how your door is, mine is a push to come in and pull to go out.
Hi @Vlad, i have an Essential Mi Smart Door. From your installation video, the operating mechanism appears to be the same. I already installed the lock, and now I can't open the door from the outside with a password or bluetooth. After authenticating, I no longer hear the port mechanism working in the background. Would you help me?
Hi Pedro, me too I can only open it using the emergency key? Did you find a solution please to your problem?
Hi, my lock has been working fine for months since i installed and followed your video instructions. Thanks! It suddenly had issue there notification says 'main door lock tongue does not pop up'. May i know any suggestions on how to fix it??
Manmeet S can you check if the door works when you have it open? I had the same issue, not with the door part, but with the wall part. The plastic that it cane with was blocking the tongue from opening fully. Worth a try to see if it’s the same issue
@@sgubylik Thanks a lot!! You are absolutely right. Adjusted the plastic in door and its working back well!! Really appreciate it.
Life saver! Thank you
Hallo i have trouble, the message like this "the main lock tongue does not pop up" how to fix it? I already fixed the blue bolt, and the doorlock work properly, but if i close the door, the alarm always on and i have message at apps the main lock tongue does not pop up
Means the door is not
Closing properly, i had the same issue with the plastic protector for the door tongue, true removing it and see if it closes, or see if you wall hole is deep enough allowing the lock to fully close
Is this Waterproof?
Can we change the door voice to English or silent mode？
kalokb03 yes, after you add the lock to your mi app, then in the lock settings you can change it to english.
@Vlad, i think i broke my cylinder to :) Now its always beeps and tel me "the key is forgotten to pull out". Can you tell me where to by the new one?
Xiaomi doesn’t sell any spare parts separately. The only service they offer is in china, you can schedule a repair via the app. If you manage to go to china that is...
@@sgubylik that is... what?
krasabc meaning right now with the virus is hard to travel.
Hi vlad, i had the same problem faced with avac23 which the door sounds open with fingerprint or password however the lock did not open from outside, can you figure out what's the problem?
jacky wong hi Jacky, could you take a short video and send it so I can see exactly what’s happening
Check square bar, square hole at outside correct or wrong, on square hole has dot marking. I think you set square hole position wrong.
I purchased mijia smartlock m2.
I am messed up with its in stallation. Cannu plz help me with its installation and app setup
kbgtextiles hello! What did you mess up? I can try to help!
Hii i just meesup with the small conector in emergency lock the socket is broken
They don’t sell it separately. They only way to fix it is next time you’re in China schedule a repair via the mi app and they should change it for you
Thank you
Can you give me advice?
My door can't be opened from the outside even though the password is correct.
Do you hear the mechanism working when you enter the password?
Hi vlad.. i found you are the only one who gave us very useful guidance about this smart lock. I already followed yr instruction including remove the right side of the small screw, put the square black metal at both side, registering my finger print at the mi home app, but still i can't open it from the outside with my fingerprint. No red light at the screen and it sounds like it tries to open but the tongue just didn't react. Could you tell me what probably went wrong. Am so curious. Thank you, you're being helpful so far🤗
Sylvia Marchia it could be something with the mechanism, make sure it’s plugged in properly. Did you go through the steps when you set it up? Or send me a video of what’s happening.
Hi my mobile Huawei P30 pro is not pairing with the lock. It has to be a xiaomi mobile only?
I managed to pair it but still same problem like others it reads fingerprint tries to open but doesn't work. What's the problem?
stephen vassallo anyway that you can send me a video of what’s happening?
@@sgubylik yes I'm going to record and send it
ruclips.net/video/OEfgi9a9qpU/видео.html
stephen vassallo if you see on your screen just before you try to open it says your main tongue does not pop up. Means you need to check on the opposite side of the door if there is enough space for the door to lock properly. Try removing the plastic casing
Do you have xtra video on how u set it up on your door??😍
hi vlad. i alreadi remove the wrong small pin. and i try to put it back. but it still cannot open from the outside. can y pls help me
mu fazain hi, what do you mean by “I removed the wrong small pin”? Did you go through the whole app setup?
@@sgubylik in the part 1 u asked to remove the small screw. i removed it in the wrong place. then i put it back but it doesnt work. still cannot open.
mu fazain putting it back won’t fix the issue, that means you shouldn’t be able to open on both sides...
Anyway, try to take a short video of what’s happening
then what should i do. i did not opn the other side small screw yet. should i change my door side? -.-
mu fazain you might have to go to xiaomi and have the mechanism changed. Can you open the door from the inside?
I’ve set the region to china but still cant find the device on my mi home app. Can somebody help me?
do you think is gonna work on the uk standard doors? btw, great video, no one will do like you did it, great job
gASTbbi it should work. Just make sure the door thickness is fine and if it’s a wooden door, you find someone good to cut to the right size(inside the door). I did it myself and I must admit, it could have been cleaner.
@@sgubylik lol, thanks Vlad :)
Hi, @@sgubylik! I have an Essential Mi Smart Door. From your installation video, the operating mechanism appears to be the same. I already installed the lock, and now I can't open the door from the outside with a password or bluetooth. After authenticating, I no longer hear the port mechanism working in the background. Would you help me?
Pedro Henrique Siqueira can you check if all the cables are connected properly and don’t have any visible damage? Did you also finish the full installation walkthrough?
Thanks for the video! It was very usefull! But we still have a problem and I don't know if maybe you can help us.
Everything it's already working, we configured the door to push from outside and pull from inside, it's not already opening from outside with out entering the key. But we have to use the key to open the door from outside, it's not working the fingerprint or the numer key (that is already configured with the app). When I put my fingerprint it make a sound trying to unlock the door but nothing happens, the same with the key number. Do you have any idea of what is happening?
I have another question. How do you broke the cylinder? Because in the video I don't see that you forced something, maybe that is happening to us and that's why the mechanism with the finger print and the key number it's not working.
Thanks!!!
Avac23 if you broke the cilinder like I did it simply won’t tell you when you left the door open, it should still work. Did you remove the pin/screw that I was talking about? Can you send me video of what’s happening when you are trying to open it? What could be is the mechanism in the door, make sure the connector is pluged in properly. Also did you cut the the piece that turns the lock mechanism?
Avac23 ruclips.net/video/0Ov7rXOWOSo/видео.html check minute 4:30 to see if you cut that piece to your size
I have same problem too, if open with finger print or bluetooth the cylinder sound work but still cannot open or close from outside with handle :(
Stanislav Snizhko добрый день, Станислав! У меня все то же самое, как вы решили проблему можете подсказать?
Avac23 How did you solve the problem? I did everything as was shown on a video, but still can not open it from outside or with a Bluetooth.
xiaomi mijia u m2 push pull
Preobrel miracle this lock singly connected via Bluetooth and that's it. Stopped connecting in the future, writes the connection is rejected by the subscriber. I can't configure it, all the settings are factory-set. I don't know what to do at all.
Mi home prog does not see the lock because it itself does not connect to Bluetooth with phones. I try to connect there is a connection and as a result writes the connection is rejected by the subscriber. That is, by the castle itself. Settings zbrosil until zaaoda with button reset. A beep sounded, and something spoke in Chinese. But with Bluetooth, the question was not removed. What to do?
вы решили проблему?
I already installed this lock. Fingers map, password, child lock working good. But anti lock switch not working. I turn anti lock switch to horizontal position but the lock can open from outside by fingers or password. I had checked anti lock limit switch inside the lock no problem. Now i don't know why. Please help me this case. Thank you.
Have u solve your problem ?
The anti lock works for normal users only, not the admin.
@@suriawansubroto9247 hallo bro, are you from Indonesia? I am just wondering if you ever installed this xiaomi door lock? Please be kind to reply, thanks
Hi vlad.. You inspire me to buy this mijia smart door lock... Thanks for video... By the way, instead i have trouble on instalation.. You will help me.. Right???
fahmy sempati2016 i can try...
@@sgubylik thank you vlad... You are the best... By the way, i'm from indonesian.. I'm sorry if my english not so good :)
@@Fahmyhabibie hallo bro, have u installed yours? I've bought a new one, but i have no confidence to install it yet. Please, be kind to reply. Btw, I am from Indonesia too. Thank you very much 🙏
@@demsontambunan73 indonesia mana mas? Saya jawa timur :)
@fahmy sempati2016 udh bs install blm gan?
Hello, I want help. The lock appears in the application, but the lock does not pair when pressing the button under the battery cover🥺💔🙁😔
I have same problem
Good day. Who can advise on NFC connectivity?
With what applications can I tie a smartphone to the lock to open it through NFC.
Must there be a smartphone from Xiaomi?
Hi, I bought this lock it should arrive in 2wks, but the company that is making the door needs to have the dimensions in order to start making them. Does anyone have the dimensions of the lock?
Srdjan Petricevic which dimensions do you need?
@@sgubylik the dimensions of the part that goes inside the door, thickness, depth, height, and dimensions of the part that is visible on the side when you open the door! Thanks
Srdjan Petricevic the outside piece is height 400x width 76x depth 26.5mm
I’ll send the inside dimensions tomorrow, need to find them
Bro... Now i have problem when setting with my phone... I messed up when try to setting finger print... I want to restart setting... Do you know how to reset the door setting... Because now i cantik connect to the door lock... 😭😭😭
Remove the lock from your app and then follow the instructions to add it again
Hello, Vlad! I have done everything as you showed on the video, but have the same problem as many of people - the lock does not open from outside with the password. Also It does not open from the app, only opens from inside. Thai is the solution?
Russia Daily you’ll need to show me what is happening with your lock, so far everyone had different issues
Vlad do you have Wahtsapp or maybe telegram to make a video call?
My user name in telegram is @zmerzlyy
@@sgubylik Hi Vlad, it also happens to me. the door doesn't want to open from the outside. can you help?
Hello vlad, i just install this xiaomi push pull smart lock, everything goin well, already move the screw pin on the outdoor side, so i just can open the door directly from inside/indoor, the problem is, i put my password or fingerprint it sucess but i cant open the door from outside/outdoor.. can u help me what the problem is it ? Thanks vlad.. btw i like every detail u explain here.. it so helpful..
audhy darmayo hi! Do you hear the mechanism working in the background after you type the password? Check if you have the door black piece connected to the inner door mechanism with the small square bit you cut (check out min 4:29, the piece I drop on the table), if you’ve got all those put together then it should work just fine. If it still doesn’t work try to take a video and sent it so i can see what’s happening.
Vlad hi vlad thanks for replied, all done bro.. the black piece already connected and there is an arrow to make sure when u install it in the right way, so now i know how this smart door working, all good thanks for ur attention.. have a blessed day bro..
@@audhydarmayo5378 cool!
Hi there... audhy and vlad.. i have the same issue with audhy. Already install everything and unscrew the tiny screw on the outside side. But still can’t open the door from the outside. I try to fixed the black piece and it’s already connected too. When i try to re setup the app told me that the door lock status is incorrect. Detected that the main lock tongue did not pop up. What is that mean? And ant suggestion what should i do? Thanks
Salut,Eu cred ca era mai interesant daca aratai cum ai montat-instalat"jucaria"pe usa.Asa timp de 12 min si juma am vazut doar o asamblare si programare.
Danut Chelner instalarea pe usa e exact ca orice yala normala. Sincer eu am avut probleme cu asamblarea si programarea. Tutorialul e facut sa acopere lipsa unui manual de instructiuni.
Salut! Foarte bun tutorialul urmeaza sa imi cumpar si eu zilele astea acelas produs aveti idee daca se poate configura in limba engleza din aplicatie sau trebuie neaparat China Mainland?
I cannot open it using one-time password. Does anyone have the same problem ? And mine seems to be very noisy when locking, is it the normal behavior ?
Does it work using the fingerprint or regular password? It does make a noise but it’s not very loud
@@sgubylik Yes, it does work using normal password and fingersprint. I just can't open it using one-time password.
@@ndangthieu let me give it a go and see if it works for me. Did you connect to your lock via the miapp and bluetooth when you generated the one time code?
@@sgubylik thanks, I've tried both direct Bluetooth connection and via hub.
Доброго дня. Кто может проконсультировать по подключению NFC ?
С помощью каких приложений можно подвязать смартфон к замку для открытия его через NFC.
Обязательно должен быть смартфон от Xiaomi?
Привет , ты установил этот замок?
@@Mike13-g8k Привет. Да.
Виталий Осадчий помогите мне пожалуйста
068-88-88-01З
Make sure device is unparied from other accounts and reset
How to solve reagarding this problem.
Users tell me how to properly configure NFC
My smartphone is not from the company Mi
How to open a lock using another smartphone
Hi vlad, thanks for the video but after the installation I had a problem with the locking system. It wont lock properly and it can be opened without any pin or finger prints. Does anyone ever encounter the same problem?
Very similar to this video
ruclips.net/video/OiJCmsm2CBQ/видео.html
Did you remove the small screw/pin on the mechanism? I had the same issue initially. Once i removed it all was fine.