Awesome video bro. Being a mechanical engineer & an automotive enthusiast, it is always satisfying to watch your videos. Keep us all motivated with your detailed videos like these.
Am Very fond of motorcycles especially my 2014 hero Xtreme and l became very big fan of you after watching your videos regarding daily commute and maintainance...
Hey, man. Once again, a very detailed, informative, and useful DIY video. I can understand the hard work and effort that has been put in making this video. Appreciate your dedication. Keep it up. Cheers!
Great video as always. Also a small suggestion would be using surgeon's gloves. You may find them at your local medicine stores for as low as 10rs per pair. It'll help you have a better grip on the components. Thanks! 😇
I do have heavy duty gloves but the problem is most of the times I have to handle the camera and frequently taking off and on the rubber gloves is not easy (read time consuming) hence I use these disposable gloves, I hope I was able to explain my situation. Thanks a lot for valuing the video 😊
Thank you bro..I'm getting my first carburetor 4 cylinder this weekend. I'm new to carbs. Always loved injection. But I couldn't resist getting a hornet 250
Sorry for asking a question but this one is interesting...can we add custom RPM metre with the help of the sensors...I think it's possible coz you said in video that ' Will remove the sensor '... So tell me bro...your the one who's boasting my interest towards this ..⚠️⚠️🔥🔥🔥🔥🔥🔥🔥🔥🔥❤️❤️❤️❤️❤️❤️
as usual .. this Diwali it had to be the carb overhaul, a douze of that NIKAVI did the trick 😋😋 happy and peaceful revving. Your next vid must be of an early morning well-tunned carb with it's sound signature @da draken'z endcan😎👀 Gr8 video ST! 🏁
The motorcycle was suffering from cold starts and pick up issues (jerky throttle response), it's been a month and now everything is super smooth plus the fuel efficiency has improved.
Unless the fuel quality is really bad you can maintain a 10000km cleaning interval (can be extended if you are not facing any serious issues). Thanks a lot Deepak for valuing the information, means a lot to me 😊
Hey, can you tell what is the function of breather hose. The one on mine (200 4v) is broken. Mechanic at workshop says it doesn't really serve a function but i belive if it was useless it wouldn't be there. Manufacturer ensure removing anything which is not needed .
Cleaning carburettor is recommended ? Many of the service men in the service centre says that removing and cleaning is not necessary for these bikes ( i have rtr 200 )
Hi, This one amzn.to/2PzQ9Qt is enough for regular maintenance (fits for most of the nut and bolts from 10mm). You can add this: amzn.to/2PzQ9Qt to complete the set.
I likes all the videos especially the slipper clutch. Thanks for all the informative video. I have pilot jet upgraded to 38 from stock 35. Now i am struggling for the idle RPM setting. currently i put 2 and half turns out but still doesn't satisfy me. i am unable to find the right settings. could you suggest me on tuning of the carb. note: Its Karizma July 2003 motor (1st lot).
My CO is high while i tested for pollution test.. It happened many a times . A year ago i went to the service center and they washed my carb.. But now it is happening again.. Mns co lvl is always high Should i clean it once more...?? Using rtr 160 bs3 Btw love ur videos ur videos r always genuine
Hi Sportstourer, As you have used Apache RTR 200 4v quite a lot, I have a query regarding its tyre. Can a 140mm tyre be fit on rear as the stock Remora is of 130mm? Will increasing tyre size requires removing chain cover and tyre hugger in Apache? Thanks
@@thesportztourer Not any specific reason. But I was researching about my bike. So read somewhere about tyre upgrade. That's why asked this question. Thanks for the reply. Can you upload an video on necessary tools which we should have for long ride touring? I am planning to buy good gloves and jacket for me. So it would be great if you can recommend some. :)
Hello bro...I got a question for you...I have splendor pro..well ridden 30,000 km...but somehow it is making some weird noises from the engine...the mechanic says that need to change the timing chain...can we tighten up the spring on which the timing chain relies ...what can we do instead of changing the chain ?? Answer please...
Hi bro, I have a new rtr 200 which seems to have carburator issue. The issue is that after a ride the bike leaks 2-3 drops of petrol from a tube below the bike and stops without any further leak. If its leaking should leak always right? Any idea?
![Apache Carburettor Cleaning : 160/160 4v/180 [Detailed Guide]](http://i.ytimg.com/vi/Rinig2ld5aM/mqdefault.jpg)
One of the best and detailed Carburetor cleaning video I find in RUclips 😊👍
Am I the only one who got excited after seeing his notifications?!
Me2
True. Me too.
Me too
Me too 🤟
Awesome video bro. Being a mechanical engineer & an automotive enthusiast, it is always satisfying to watch your videos.
Keep us all motivated with your detailed videos like these.
I CAN SEE AN UPCOMING RUclips STAR IN YOU..
Thank you !! Excellent work !!
I am from Srilanka and its all in english thank you
Am Very fond of motorcycles especially my 2014 hero Xtreme and l became very big fan of you after watching your videos regarding daily commute and maintainance...
Hey, man. Once again, a very detailed, informative, and useful DIY video. I can understand the hard work and effort that has been put in making this video. Appreciate your dedication. Keep it up. Cheers!
You r the best ...editing All right and clear information ❤❤
Clear understanding of the components.
thanks for your effort man really killed the video with your clear Articulation and video editing skills.
Thank you so much @Sai Varun for appreciating the efforts and supporting technical content like this ❤
ye kar diya to I can open my own mechanic shop... salute bhai :D
Well explained everything detailed. Loud and clear.
Great video as always. Also a small suggestion would be using surgeon's gloves. You may find them at your local medicine stores for as low as 10rs per pair. It'll help you have a better grip on the components. Thanks! 😇
I do have heavy duty gloves but the problem is most of the times I have to handle the camera and frequently taking off and on the rubber gloves is not easy (read time consuming) hence I use these disposable gloves, I hope I was able to explain my situation.
Thanks a lot for valuing the video 😊
@@thesportztourer ooo now I get it... And yes videos have always been top notch... I'm here for the long haul... Let's make it to 1 Million soon! 😁❤️
This is a real pro level DIY ! Even most mechanics do not have the kind of professionalism you're showing.. Excellent video !!
Very useful video for servicing the cv carburettor .
Bro you make the best of videos please dont stop your work....your loud clear and detailed explanation is the best....Keep growing 😎🤘
Nice video and i really like the presentation of the video.
Thank you bro..I'm getting my first carburetor 4 cylinder this weekend. I'm new to carbs. Always loved injection. But I couldn't resist getting a hornet 250
best video on RUclips till now.
You explained like a professor. Great.
Thank you so much for valuing the efforts! Really means a lot to me 😊
guess never going clean one, but so pleasing to watch it.
Very nice video clarity is good. Thanks for taking this effort
Thank you so much for appreciating the efforts and supporting the channel, really means a lot to me 😊
Your knowledge about this stuff never ceases to amaze me... 🔥🔥
This is way better than ENGINEERING EXPLAINED
Thank u very much . Very very very useful and best video available
Best carb cleaning video
Very Good and detailed every bit of it.Keep it up good luck
Sorry for asking a question but this one is interesting...can we add custom RPM metre with the help of the sensors...I think it's possible coz you said in video that ' Will remove the sensor '... So tell me bro...your the one who's boasting my interest towards this ..⚠️⚠️🔥🔥🔥🔥🔥🔥🔥🔥🔥❤️❤️❤️❤️❤️❤️
how did i missed this video, Thank you for sharing this, i always follow your video for DIY maintenance.
Thanks a lot Praful! happy to know that you like the video 😊
Best carburettor video
Very nicely explained Sir👍
Bro it's to to good & every one will do it very easy...thank you so much
👍 For your efforts & hardwork
I was waiting for this video. Well shot bro
Ur hard work appreciatd
Thank you so much Amit for appreciating the efforts. Happy to have enthusiasts like you on the channel who take interest in these technical videos 😊
Very well made!
as usual .. this Diwali it had to be the carb overhaul, a douze of that NIKAVI did the trick 😋😋
happy and peaceful revving.
Your next vid must be of an early morning well-tunned carb with it's sound signature @da draken'z endcan😎👀
Gr8 video ST! 🏁
in depth and very Informative video... very well explained.... thanks for providing such content....
Beautiful presentation bro , I always follow you...
Watching from Bangladesh.
Very nice,clear and helpfull. Thank you
Very usefull video sir
My bike carburetor cleaning sir
Indian ChrisFix ki jai ho! Jai ho
Thanks Ranajoy! I am taking your comment as a big compliment 😊
I have no words to say ...loved it ..😘
It's a joy to know that you liked it so much, appreciation means a lot to me 😊
Hello bro thank you for the video can we use WD 40 to clean the carburetor?
Excellent video ... Keep the videos coming in...
I have some issues on removing the carb float screws its very tight what to bro any suggestions -I have rtr 200
Any difference in pickup or smoothness after cleaning carb..? Did you notice any other changes too..??
The motorcycle was suffering from cold starts and pick up issues (jerky throttle response), it's been a month and now everything is super smooth plus the fuel efficiency has improved.
@@thesportztourer great to hear that. Thank you. Keep uploading videos.
Camera work very clean
Bro, Can i use Nikavi Carburetor for my honda shine 125
What is the use of TPS? And how does it work?
Excellent work 👍
Thanks ❤
Can I clean diaphragm by the petrol 🤔 please tell me and that i clean 🤔
TPS sensor aapne nikala tha usko set kiya ya nhi
Highly informative video.. thank u..😊
Hats off to you Brother....🎩🎩
I am having a hard time with dazzler carburettor tunning. Your help will be highly appreciated
Hi,
What kind of problem are you facing?
Great content quality I've got a 160 4v so I guess I could use this too
Very much informative. Thnk you bro.... Good work keep it up
perfect explanation, thank you
Please make video on all you tools that you have
Thank you. Nice👍😊
Need more RUclipsr now days like you # detailed information # keep it up
One question after how many km unicorn 150 require to clean carburator
Unless the fuel quality is really bad you can maintain a 10000km cleaning interval (can be extended if you are not facing any serious issues).
Thanks a lot Deepak for valuing the information, means a lot to me 😊
Hey, can you tell what is the function of breather hose. The one on mine (200 4v) is broken. Mechanic at workshop says it doesn't really serve a function but i belive if it was useless it wouldn't be there. Manufacturer ensure removing anything which is not needed .
Wht is the purpose of throttle position sensor in carburetor type.
Cleaning carburettor is recommended ?
Many of the service men in the service centre says that removing and cleaning is not necessary for these bikes ( i have rtr 200 )
Correct it is maintenance free
@@ashithcalicut as a mechanical engineering, nothing is maintenance free
Very nicely shown.
Sir I have black smoke problem in hero duet Scooty .... please Reply
Can you suggest a good socket set that would fit most of nuts and bolts of my rtr 200?..
Hi,
This one amzn.to/2PzQ9Qt is enough for regular maintenance (fits for most of the nut and bolts from 10mm).
You can add this: amzn.to/2PzQ9Qt to complete the set.
@@thesportztourer thank you sir!... *RESPECT*
Excellent Video... 👍
Bro pls telll or video upload hero hunk bike air screw how many turn
Bhai pulsar 220 ka carboreter apache 200 lg jayega nd kux frk pdega plz riply krna
Hi, is this Chinese EL cheapo carb?
What happened if sensor cable not connected.. reply..as soon as possible
is it required to clean carboratar or fuel additive are enough my bike completed 30k please reply
Excellent video.
1. Is this an Apache 200 carb?
2. Will that cleaning spray damage the seals???
I likes all the videos especially the slipper clutch. Thanks for all the informative video.
I have pilot jet upgraded to 38 from stock 35. Now i am struggling for the idle RPM setting. currently i put 2 and half turns out but still doesn't satisfy me. i am unable to find the right settings. could you suggest me on tuning of the carb.
note: Its Karizma July 2003 motor (1st lot).
Sir my is Cbz xterm my problem is automatic off can you explain problem
My apache 200 bike powerdrops during accelerating this is intermittent what could be reason
I'm fitting this carburetor starting problem.?
i bought my RTR 200 RE 2.0
does fuel additive is better than this manual cleaning?
Hi my customed Bajaj sunny into pocket bike after carburettor cleaning it is not starting
Another fantastic video 👍
All video very interesting and helpful..
Thanks for your time and knowledge,
Honda Shine 2012 model Petrol cock off karne ke baad kitne km chalta hai ??
Average check karne ke liye??
My CO is high while i tested for pollution test.. It happened many a times . A year ago i went to the service center and they washed my carb.. But now it is happening again.. Mns co lvl is always high Should i clean it once more...?? Using rtr 160 bs3
Btw love ur videos ur videos r always genuine
Hi!
I clean my motorcycle's carb once in a year. Have you checked your air filter?
Thanks a lot for all the love and support.
So much nice information
Can we use wd40 for cleaning carburettor
Bro my bike Pulsar 135LS' carburetor slide (piston) has some scratches. So what will be the effect of it on the performance??
Nice video sir, i learned feom it👍😁
It's a joy to know that you found it informative 😊
Thanks for the appreciation!
Sincere efficacy be seen in this video
Very lovely & helpful video 💥💥💥👌👍
What will we do.if drain screw is jamed
Hi Gunjan,
As said by Rahul WD 40 should help, also lightly tap the screw head to help it free from the stuck point.
Crisp & clear 👍
Can we clean jets with pure acetone for better cleaning if you don't have carb cleaner?
Hi!
It can be used on metal parts but try to keep it away from other rubber and soft plastic parts.
Can i clean carbo by w d 40?
Hi Sportstourer,
As you have used Apache RTR 200 4v quite a lot, I have a query regarding its tyre. Can a 140mm tyre be fit on rear as the stock Remora is of 130mm?
Will increasing tyre size requires removing chain cover and tyre hugger in Apache?
Thanks
Hi Girish,
Any specific reason to upsize? My suggestion will be stick to stock size 😊
@@thesportztourer Not any specific reason. But I was researching about my bike. So read somewhere about tyre upgrade. That's why asked this question.
Thanks for the reply.
Can you upload an video on necessary tools which we should have for long ride touring? I am planning to buy good gloves and jacket for me. So it would be great if you can recommend some.
:)
Hello bro...I got a question for you...I have splendor pro..well ridden 30,000 km...but somehow it is making some weird noises from the engine...the mechanic says that need to change the timing chain...can we tighten up the spring on which the timing chain relies ...what can we do instead of changing the chain ?? Answer please...
Hi Ronak,
Ask your mechanic to check if the timing is ok. Better get the timing chain replaced (peace of mind).
@@thesportztourer wouldn't be it premature to change it on 30,000 km... totally agree with you bro but...
Yes, it's a kind of premature specially for a Splendor that's why I said to check the timing first 😊
@@thesportztourer so what should tell him...I mean he's telling me straight to change..I told him if the tappet gap is correct or not ..
Yamaha szrr ki mileage set karne ki video banaiye please and thanks
You did not mention on the TPS sensor position. Also need details on air screw o ring and washer
Hi bro, I have a new rtr 200 which seems to have carburator issue. The issue is that after a ride the bike leaks 2-3 drops of petrol from a tube below the bike and stops without any further leak. If its leaking should leak always right? Any idea?
What is the odometer reading of this bike that you cleaned carburettor..??