6:45 Should the webbing be sewn below the top seam allowance? I sewed my webbing at the centre of bag sides, as shown in the video, but then I did not have the full seam allowance to sew all D pattern pieces together. I absolutely love this tutorial and my Belt Bag ❤❤❤❤ Thank you for the free pattern!❤
It is totally possible to reduce the size! I would print it at a reduced scale to get smaller pattern pieces. I would start at maybe printing at around 70%. Hope this helps and we would love to see how your mini version turns out!
You should mention the width of the zipper. My zipper is 3.2cm wide, so 2cm is going for the seam allowance, and then 1.2cm of the zipper width is added to the side length of the front panel. Which in the consequence makes all further pieces not matching that panel !!!!!
You would add the optional pocket on to the back lining piece before assembling your belt bag together. There are two dots on your back piece for the pocket placement. Hope this helps let me know if you have anymore questions. 😊
Gracias por el tutorial y también por el patrón ❤❤
6:45 Should the webbing be sewn below the top seam allowance? I sewed my webbing at the centre of bag sides, as shown in the video, but then I did not have the full seam allowance to sew all D pattern pieces together.
I absolutely love this tutorial and my Belt Bag ❤❤❤❤
Thank you for the free pattern!❤
Hi there, so glad you love your new belt bag! Yes, the webbing should be placed just below the seam allowance as shown in the video. 😊
Would it be possible to substitue the D ring for a buckle strap?? Thank you for this fabulous tutorial ❤❤
Yes, absolutely!
@@CoreFabrics thank you so much for replying!! Would I just follow the same steps but use the buckle?
Exactly! You could also play with the length of the webbing on either side of the belt bag. That way you could tie the buckle in the middle.
What does the patch mean the Bon ? Just curious I'm a newbie
The patch says Bon Vivant which is French for a person who loves living the good life 😊
Hi, great bag pattern and tutorial. Would it be possible to reduce the size for a child’s bag? Thank you
It is totally possible to reduce the size! I would print it at a reduced scale to get smaller pattern pieces. I would start at maybe printing at around 70%. Hope this helps and we would love to see how your mini version turns out!
Thank you! I am sewing it right now and will let you know how it turns out. So far, so good. 😊
I finish the bag and it turned out great! I’m not sure where to post a picture so you can see but will put it on my instagram account (it’s private)
You should mention the width of the zipper. My zipper is 3.2cm wide, so 2cm is going for the seam allowance, and then 1.2cm of the zipper width is added to the side length of the front panel. Which in the consequence makes all further pieces not matching that panel !!!!!
When and where is the optional pocket piece “E” added?
You would add the optional pocket on to the back lining piece before assembling your belt bag together. There are two dots on your back piece for the pocket placement. Hope this helps let me know if you have anymore questions. 😊
@@CoreFabrics thank you.