Most woodworking videos like this have people using thousands of dollars of machinary, I love how you've done all this with the sort of kit most of us average Joes have got. Great job!
NICELY DONE! Both the design and the workmanship look very good. I predict that this handsome riser will serve you well for many, many years. Best, Chris
I don’t know which is better the manufacture of the bow or the tools that you made. I never thought of using a bow saw that way before but I will not forget now. I am going to put one in my toolbox!
I`ve always found it amazing to watch a fine craftsman work. And here is one good example of that. Great work. I am self an archer so it made these two videos is even a notch better. thanks for sharing.
How to measure and set up for and cut out arrow shelf for my riser. Should it be a little more then center to allow for the shelf padding I started my first riser after watching you. I don't have printer that works so I had to eyeball any help would be great.
can you use this method to make a take down long bow and make it with arrow center soo fly straight please get back with i wright to others and they dont answer
It looks as though he is using small pieces of hardwood from pallets. Be sure to only use hardwood and not softwood. The results will only end up as an epic fail.
Congratulations! Great! But: Is there a "step-by-step"-version of this video? (Especially to tell me where exactly to mark the piece of wood for further carving and sanding? )
That pallet wood had some nice quality though... I made a entire takedown bow myself, using old skis and making a riser by using wood clue and scandinavien wood (don't know the translation...) It's my own design and I used no templates but i have to admit that your model looks much nicer and cleaner...
Meu Caro Bom Dia ! Muito Bom o vídeo. Mas, você não explicou essa última peça de cor branca, que foi fixada no RAISE onde vai a flixa. Qual é a função dela? Qual a função desse parafuso roscado que foi fixado no lugar onde será parafusada as lâmina? Valeu.
Most woodworking videos like this have people using thousands of dollars of machinary, I love how you've done all this with the sort of kit most of us average Joes have got. Great job!
Finally!! A true craftsman.Using his ingenuity with basic tools to make a masterpiece.Great Job.
Basic? I made a bow handle just with a victorinox knife
@@Niko-xt5bs nobody ask
If there isn't a video it didn't happen.
NICELY DONE! Both the design and the workmanship look very good. I predict that this handsome riser will serve you well for many, many years. Best, Chris
Excellent wood work, congratulations !!!
Fantastic craftsmanship and basic tools. I'm inspired
your work looks very professional sir.
Thank you very much!
@@weaponizer4444 pls have a look my channel, if you find something worth pls subscribe my channel sir.
I don’t know which is better the manufacture of the bow or the tools that you made. I never thought of using a bow saw that way before but I will not forget now. I am going to put one in my toolbox!
Great job. I am impressed with the simplicity of tools and process with precision.
I once made a pallet out of old bow risers. Just kidding. Love the work and the skill set. Great job!
Cool, thanks 😄
Wow !!!Excellent
you are experienced, working with wood, your result is of another level, congratulations.
I`ve always found it amazing to watch a fine craftsman work. And here is one good example of that. Great work. I am self an archer so it made these two videos is even a notch better. thanks for sharing.
I really enjoyed seeing this beautiful craftsmanship 🤙
Glad you enjoyed it,
Thank you very much!
Amazing work with not fancy tools!
This is an awesome build and I admire the work. That said, the most impressive part of this is the DIY belt sander. That's just genius.
Making the difficult seem easy. Amazing work, amazing video.
What us the max width and the width of the riser/ limb overlap
dove posso trovare la dima. per fare riser grazie
nella descrizione del video c'è il collegamento per Pinterest, lì hai il modello
Spero di aver tradotto bene dato che non parlo italiano
What a workout video you make. Losts of upper body excersize! Turned out well.
awesome build bro !
Mad skills and an excellent eye,.
thanks, it means a lot
Beautiful piece.
Very well done mate!
One day I will make my own riser as well. Great work and thanks for the inspiration!
I love the sounds of carpentering tools.
beautiful work
Thank you so much 😀
Very nice work and creative use of tools. You don't have to spend a lot of money.
Thanks 👍
Omg man you’re perfect !!!!❤️❤️❤️
Son, sell the riser and, buy some tools. You’re hampering your talents.
How to measure and set up for and cut out arrow shelf for my riser. Should it be a little more then center to allow for the shelf padding
I started my first riser after watching you. I don't have printer that works so I had to eyeball any help would be great.
Beautiful , you have a gift.
Wow, thank you
Beautifully done and very good video. Michael
Con que madera lo hiciste?
Nice job. Would you provide the drawings/plans/templates of all bow parts?
Nice tutorial with manual tools 👍
Complimenti a te, stupendo 👍👋🏹
grazie
What is the entire lenght of the riser? Thanks, nice work.👋
50 cm
Thank you 👍
Amazing work dude!! Could you please share the dimensions, especially the first 6 peices before you glue together? Pretty please 🙏
Amazing sir👍👍👍👍👍😎😎😎☕🇮🇩
Very nice work.
I’m curious. I can access lots of pallets
How big should the bow raiser be?
Nice job, made it look so easy
Très bon tuto, bien expliqué clairement , il ne manque rien.
Félicitations.
what is that that you put on the places where the limbs locate? Some sort of material?
Que madera usaste?
What should be the ratio of limb and bow raiser for wooden raiser
How bout some measurements specs. Good vid thanx
In the description
@@weaponizer4444 ok thanx. I'm not that much on computers.
was it acetone
Beautiful craftsmanship
Superb broh 💘
Have you design a blue print for this?
I never want these video's to end. Great stuff so far
Beautiful work.
do you have any drawing with actual sizes? I have down load a photo from pinterest but it donto show any sizes.
The length is 48 cm or 19 inches
can you use this method to make a take down long bow and make it with arrow center soo fly straight please get back with i wright to others and they dont answer
DUDE!! That was like watching Leonardo di Vinci paint 🎨
Thanks for sharing 👍
friend could you decide the measurements of the arch the plant does not design what measurements to print please
Where can i get the stencil for the riser?
www.pinterest.com/pin/316307573826767975/
Very nice work!
Good work! What type of product you use to make Wood shiny and polish?
what's your name for sticking it on the grip that white
what kind of wood it is? it looks like hardwood, not spruce ...
Where can I get the riser pattern? Thanks
Beautiful
Thank you
Dying to see the finished bow
Bro what type of wood do you use
It looks as though he is using small pieces of hardwood from pallets. Be sure to only use hardwood and not softwood. The results will only end up as an epic fail.
Odlicno izgleda!!!Kolika je sirina ovog riser-a?Da li negde moze da se nadje nacrt?
What do you use for the finishing polish in the end ?
Hey could you please give
Us the paper plan you used for the riser
🇧🇷 perfect 👍👍👏👏
EHRE CAN I FIND PART 2 PLEASE ? WELL DONE SO FAR VERY NICE WORK .
Unbelievable...so perfect work.. I love it
What wood treatment do you use? I'm impressed with how it makes the grain pop
Nice work!
Nice work buddy ) mb u should share next time dimensions so we could try it and share feedbacks. Any way it was amazing , well done
What is this wood
you are a very good skillful...congratulations
Show de bola parabéns.
Obrigado 👍
Mmm yes, but where is the second part?
Congratulations! Great! But: Is there a "step-by-step"-version of this video? (Especially to tell me where exactly to mark the piece of wood for further carving and sanding? )
Very good
parabens lindo riser ganhou mais um inscrito um abraço aqui do brasil
Can You tell me full list of any tools and parts i have buy to make this handle?
name of glue did you use for join the pallet wood ?
Buatannya kemas dan cantik
very clever using an old chuck to hold cylindrical objects for drilling
Project beautiful and happy to observe that you used my centering machine for rods. A warm hug
A very tough job! Wow!
Lovely sharp tools
Wonderful job !!
El trabajo es muy bueno, ¿Pero y las medidas?, Las distancias?, Las instrucciones para quienes queremos hacerlo?
Lo mismo estoy buscando
i subscribed, i'm interested on how you make the limbs
Dear sir I want to buy this one kindly reply fro. where can I buy ?
That pallet wood had some nice quality though... I made a entire takedown bow myself, using old skis and making a riser by using wood clue and scandinavien wood (don't know the translation...) It's my own design and I used no templates but i have to admit that your model looks much nicer and cleaner...
Meu Caro Bom Dia !
Muito Bom o vídeo.
Mas, você não explicou essa última peça de cor branca, que foi fixada no RAISE onde vai a flixa.
Qual é a função dela?
Qual a função desse parafuso roscado que foi fixado no lugar onde será parafusada as lâmina?
Valeu.
Excellent job thank you :)
Awesome!
Thanks!
very hard that pallet wood , ;)
Hi, how can i get the measurements of the riser and the limbs ? (PLEASE)
Anyway, amazing work !!!
Шлифмашина с крупным зерном наждачки. Может быстрее было бы. Лайк конечно.