MacGyvers Tire and Wheel has added more to the Body Shop !!!!! The Fabrication Division. All the new pieces are excellent working rigs. Great work Mike👍👍👏👏👏🇺🇲
@@jimbrown5055 thank you kindly. I almost mounted the crane on the back of the blue diesel. But at the last minute I decided not to and put it back on its tracks. I'm glad I did and put the low dump bed on it instead. Now I have a red one and blue one with the same bed and wheels. Thanks for watching and your comment. 👍🏾😎
@@diecast_MikeEspo yeah my brother in law has one on a trailer. But it has nothing to do with a car or truck. It's just a plain ol home made barbecue grill on wheels and it can be towed down the road.
@@Diecastcarnut your welcome Jason. Couldn't stand the smell any longer. That crap had to go. Lol. Thanks again for the diesels , the diesel wheels and the Ford tractor. Oh and the crane truck for parts. Anyway more to come in the future. Thanks for stopping by 👍🏾😎
Been busy again I see! Love that plow set up you made for that tractor, Nice! And that back how set up and blade you made look nice on that tractor! Well done, Mike!
@@charlesdiecastgarage thanks Charles. I been wanting to get the black one done. So since I had the M2 blade and the blue one Jason sent me I decided to work on it too. Just another welding day at MacGyver's. Thanks for watching 👍🏾😎
Omg Mike you have been busy brother Nice job on all them trucks with the new dump beds on them and the plow on that Ford tractor job well done brother I love how it adjusts Great video Mike great video
@jessesdiec astgarage thanks my friend. I forgot to explain what I made the 3 point hitch with. I used the spacer that comes in-between an M2 Casting and the base plate. I'm sure you've got a few from your M2 castings. It's a little bar with a hole in each end. It's thick where the screw goes through. I filed down only one side. And then I bent it right where the bar connects to the round part with the hole. On the plow part I just drilled a small hole and used a coarse threaded screw through the hitch and into the plow arm. Once the screw gets simi tight it's good to go. I built it based on a real one just a little difference in the braces is all. Anyway. I'm glad you like it. Just something to do. Hey. By the way did you send me a chrome front bumper from a car. I found one in my room on the floor and it looks like an M 2 bumper from an older model GM car I've looked and looked at my castings and can't seem to find anything missing a front or rear bumper. So I'm wondering if it came from the box you sent me.
@@mikedison1149 well you definitely know how to put it together brother I can't job well done, And I might have sent it I know I sent several pieces of semi-muffler pipes bumpers and all that stuff so it might have came out of the stuff I sent you
Awesome customization on those trucks. I like the front bumper. Great work man! I think the small tractor is an Osh Kosh. Those are for off road heavy duty. Strong trucks, but wicked slow. I like the backhoe. Wicked cool!
@@johhnysdiecastcorner thanks for the info on the small tractor. I thought about it later they may use them at large air ports to move those giant 747s around on the tarmac. Glad you like how the hotwheels tractor looks after I customized it. Thank you for watching and your comment 😎👌🏾
I remember my first diorama i made is inspired from gas monkey garage, it was pretty neet as i liked to craft a lot since school, im amazed by seeing this video thumbnail and those memories came by.
@@naumaansaeed cool. The background is just a copy from an office printer on copy paper. .I glued it to a piece of. Wood ..and the top of the wood is tucked into a box lid and the box is behind it. The floor is just a piece of wood from the bottom of a drawer from a piece of bedroom furniture. Like a drawer you keep your socks in. Real thin. And it is wedged in under the box in the background. This is all on a shelf about 3 feet above the floor. And I set my tripod and camera on the floor in front of this shelf and make my videos Just something I throw together. But it works. Anywho thanks for watching 👍🏾😎👌🏾
Brother, we need to get you a sponsorship from the welding machine. That way, you can have an endless supply. Thank you for the shout out brother. The trucks do look good with your diesel wheels on them, brother. I am a fan of the black walls but I think those trucks look better with your wheels. Black walls don't go good with everything, like those trucks. I always enjoy seeing what you did to what vechels, have a good evening brother
@@mikedison1149i did see it, brother. There is no stopping you in what you can do. The two bucket modifications exactly what I'm talking about. She is ready for work and whoever's operating it has the coolest tractor ever. The shop and a welding machine and rods anything is possible.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
MacGyvers Tire and Wheel has added more to the Body Shop !!!!! The Fabrication Division. All the new pieces are excellent working rigs. Great work Mike👍👍👏👏👏🇺🇲
@@jimbrown5055 thank you kindly. I almost mounted the crane on the back of the blue diesel. But at the last minute I decided not to and put it back on its tracks. I'm glad I did and put the low dump bed on it instead.
Now I have a red one and blue one with the same bed and wheels. Thanks for watching and your comment. 👍🏾😎
Awesome job mike great show👍👍
@@diecastloonie6055 thanks Michael. 👍🏾😎
Super Nice, MIke
@@kibbo Thanks. 😎👌🏾
Good morning a very beautiful video Thank you
@@vongtaynhanaikptt6066 thanks. And thank you for watching. 😎👌🏾
Nice work Mike .
I liked the BBQ trailer you made for someone in a different video.
Lots of cool trucks .
Cool video .
Espo
@@diecast_MikeEspo thanks Mike. Yeah the grill is a one of a kind. I have a feeling someone is gonna make a real one after seeing it.
@@mikedison1149 Yes Mattel will make one soon , 😂😂
@diecast_MikeEspo maybe so but I was referring to someone making a real one. Probably Charles and his dad. Lol.
@@mikedison1149 O A real one , I have seen Big Smokers home made that are on trailers . They are also cool 😎.
Espo .
@@diecast_MikeEspo yeah my brother in law has one on a trailer. But it has nothing to do with a car or truck. It's just a plain ol home made barbecue grill on wheels and it can be towed down the road.
Thanks for the shout out Mike those trucks turned out great. I knew you would make them look great. Thanks for sharing great video
@@Diecastcarnut your welcome Jason. Couldn't stand the smell any longer. That crap had to go. Lol. Thanks again for the diesels , the diesel wheels and the Ford tractor. Oh and the crane truck for parts. Anyway more to come in the future. Thanks for stopping by 👍🏾😎
Been busy again I see! Love that plow set up you made for that tractor, Nice! And that back how set up and blade you made look nice on that tractor! Well done, Mike!
@@charlesdiecastgarage thanks Charles. I been wanting to get the black one done. So since I had the M2 blade and the blue one Jason sent me I decided to work on it too. Just another welding day at MacGyver's. Thanks for watching 👍🏾😎
@@mikedison1149 Hey, you need to invest stock in JB Weld! I invest in Walmart since I spend most of my paycheck there, 😂
Very cool....Nice work on that Truck...........🎉
Thanks Brian. It's ready to hit the road no doubt. 👍🏾😎
Omg Mike you have been busy brother Nice job on all them trucks with the new dump beds on them and the plow on that Ford tractor job well done brother I love how it adjusts Great video Mike great video
@jessesdiec astgarage thanks my friend. I forgot to explain what I made the 3 point hitch with. I used the spacer that comes in-between an M2 Casting and the base plate. I'm sure you've got a few from your M2 castings. It's a little bar with a hole in each end.
It's thick where the screw goes through. I filed down only one side. And then I bent it right where the bar connects to the round part with the hole. On the plow part I just drilled a small hole and used a coarse threaded screw through the hitch and into the plow arm.
Once the screw gets simi tight it's good to go. I built it based on a real one just a little difference in the braces is all. Anyway. I'm glad you like it. Just something to do. Hey. By the way did you send me a chrome front bumper from a car. I found one in my room on the floor and it looks like an M 2 bumper from an older model GM car I've looked and looked at my castings and can't seem to find anything missing a front or rear bumper. So I'm wondering if it came from the box you sent me.
@@mikedison1149 well you definitely know how to put it together brother I can't job well done, And I might have sent it I know I sent several pieces of semi-muffler pipes bumpers and all that stuff so it might have came out of the stuff I sent you
@@jessesdiecastgarage I believe it must have. It looks like a Buick bumper. From a Riviera maybe. I'll try to remember to show it in my next show.
Thank you for sharing. Nice job there.
@@Paulthediecastguy thanks Paul. 👍🏾😎
Awesome customization on those trucks. I like the front bumper. Great work man! I think the small tractor is an Osh Kosh. Those are for off road heavy duty. Strong trucks, but wicked slow. I like the backhoe. Wicked cool!
@@johhnysdiecastcorner thanks for the info on the small tractor. I thought about it later they may use them at large air ports to move those giant 747s around on the tarmac. Glad you like how the hotwheels tractor looks after I customized it. Thank you for watching and your comment 😎👌🏾
I remember my first diorama i made is inspired from gas monkey garage, it was pretty neet as i liked to craft a lot since school, im amazed by seeing this video thumbnail and those memories came by.
@@naumaansaeed cool. The background is just a copy from an office printer on copy paper. .I glued it to a piece of. Wood ..and the top of the wood is tucked into a box lid and the box is behind it. The floor is just a piece of wood from the bottom of a drawer from a piece of bedroom furniture. Like a drawer you keep your socks in. Real thin. And it is wedged in under the box in the background. This is all on a shelf about 3 feet above the floor. And I set my tripod and camera on the floor in front of this shelf and make my videos
Just something I throw together. But it works. Anywho thanks for watching 👍🏾😎👌🏾
Brother, we need to get you a sponsorship from the welding machine. That way, you can have an endless supply. Thank you for the shout out brother. The trucks do look good with your diesel wheels on them, brother. I am a fan of the black walls but I think those trucks look better with your wheels. Black walls don't go good with everything, like those trucks. I always enjoy seeing what you did to what vechels, have a good evening brother
Thanks David. No comment on the black tractor you sent me ? Hum 🤔. Oh well. I do like the way it looks now for sure. Thanks for watching. 👍🏾😎👌🏾
@@mikedison1149i did see it, brother. There is no stopping you in what you can do. The two bucket modifications exactly what I'm talking about. She is ready for work and whoever's operating it has the coolest tractor ever. The shop and a welding machine and rods anything is possible.
@@davidbeeson1178 😎👌🏾
You're a great fabricator. I enjoyed the video.
@@T-JoesModelBusesandMore1210 thanks Big T. 👍🏾😎
Very Nice
@@428garage thanks. ✌🏾😎
Awesome 👍🔥😎
@@daneself858 thanks 😎👌🏾
Very Cool
@@ratblacksdiecast thanks. 😎👌🏾
The shop was busy
@@garysdiecastcollection just a little bit. Lol. Thanks for stopping by 😎👌🏾