How Does a Gear Reducer Work?
HTML-код
- Опубликовано: 8 сен 2024
- Have questions? We'd love to chat! Send us a message here: www.vikingpump...
In this video learn how a gear reducer - or speed reducer - creates a reduction in speed between the motor and the pump. To learn more, visit our website at vikingpump.com.
#VikingPump #Reducer #howitworks
▬ More Videos ▬▬▬▬▬▬▬▬▬▬▬▬
► All Viking Pump Videos: / vikingpumpinc
► Subscribe to Viking Pump Channel: bit.ly/2KJGmJT
▬ Social Media ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► Facebook: / vikingpump
► LinkedIn: / viking-pump
► Website: www.vikingpump.com
Gear reducers are devices used to transmit mechanical power from an electric motor or other driver to a driven load. In the world of pumps, they convert the high speed, low torque input from the motor to a low speed, high torque output at the pump. To understand how they accomplish this we’ll need to look inside. Inside you’ll find 1 or more pairs of gears. Each pair consists of a smaller driver gear and a larger driven gear. The ratio of the number of teeth on the driven gear to the number of teeth of the driver determines the reduction ratio of that pair. For this particular gearbox, the driven gear has 80 teeth…the driver gear has 29 teeth…so this single reduction gearbox has a ratio of 2.76:1. This means that the input shaft must be rotated 2.76 times to fully rotate the output shaft once. Dividing the motor’s speed by this ratio will determine what the pump speed would be. Gear reducers are mostly utilized for large pumps or in applications where the liquid is viscous or abrasive. They are highly efficient and offer a simple and reliable means of slowing the pump when required.
Simple and easy, you got a new sub bud
Very nice video
V well explained
Geat reduce are diveces used to transmit mechanical power from an electric motor or other driver to a driven load in the world of pumps, they convert the high speed low torque input from the motor to a low speed, high torque output at the pump to understad how they acocomplish this well need to look inside indide you'll find 1 or more pairs of gears each pair consists of a smaller drive gear and a large driven gear the ratio of the driven gear to the number of teeth of the driver determines the reducion ratio of that pair for this particular gearbox, the driven gear has 80 teeth the driver gear has 29 teeth so this single redution gearbox has a ratio of 2.76:1
This means thattbw input shaft must be rotated 2.76 times to fully rotate the output shaft once.
how much po
voltage ❓️