*Turks Head Jig and More Patterns* If you want more information on the Turks Head/Jig or Board, or want some more Turks Head Patterns: igkt-solent.co.uk/make-your-own-turks-head-tool/
A couple of pro tips: 1) There are holes in the edges of the jig so that it can be used to make THKs with odd numbers of bights. 2) Start with only half your length of cord through the pilot hole to reduce the amount line to be pulled under each time. After taking the knot off the jig, double and treble the knot in the other direction with the other end of the cord. 3) Use a crochet hook to pull the line under each time. Reduces the time spent dealing with twisted cord. I've invested a lot of time memorizing how to tie various TH base knots in hand or around a piece of work and then how to expand them but I still use a jig when I can because the knot ends up more uniform. Saves time fairing it up.
Where did you find the instructions that you eluded to for using this jig. Have been trying to find the cookbooks that are now out of print. What changes a Turks head into a globe covering knot?
I have seen many tutorial vids for knots. This is one of the best, hands down. I just easily tied this and will be making a flat pendant with knitting cord with it. Many thanks!
Fantastic video, and with your instructions, I made my own template, and have also completed my first proper 8 bight turks head... Thankyou again.....👍
Oh dear, what have you now done???............... If you were like me, you end up covering everything that is round with a Turks Head. There is nothing better than seeing your work adorning something. Oh yeah, forgot to ask, are the fingers getting sore?
@@KnottingKnots thankyou from the comments, I'm an ex sailor, but have only recently got back into knotting, and love to just sit and Potter with paracord, I'm interested in the turks head, and globe knots, for bell Ropes, once again, great videos, very informative, I just need the tempted for lesser bight now, lol, and I will be knotting mad, and yes, the fingers are tingling...lol... Keep up the great work....... Do you have a Facebook page... All the best.. Alan.......👍👍
These knots have confused me for a very long time. However, after watching your video, I made my first turks head knot. Yay! Thank you so much. I'll send you a pic when I'm all finished with my project. Thanks again.
Excellent lesson, I took an interest in this stuff many years ago as a young merchant seaman working on general cargo ships, normally following the Ashley book of fancy knots and rope work. You are doing a top job of helping to revisit these almost forgotten but loved skills.
Thank you so much! If you are thinking of making your own tool and need some more patterns, you can find them here: igkt-solent.co.uk/make-your-own-turks-head-tool/ Thanks for taking the time to view and also make a comment, very much appreciated.
Hello Alan, the dimensions of the board can be found on the following link, then for hole spacing, just make 9 holes equidistant apart. Thanks for taking the time to view and also make a comment, very much appreciated. Here is the blog post: igkt-solent.co.uk/turks-head-chart/
Ah, you want to see the mess I get into as I am filming. Sometimes I go to tie the simplest of knots and then there is a pause on the film, followed by "Oh bollocks".
Johnny Debt I do a little bit of both. I’ve wrapped everything from walking sticks to hammers and hatchets. I’ve also done lots of bracelets and key fobs. Always looking for original ideas to replicate. I’m attempting to pass this skill on to my 3 kids. Alas, that process is bearing little fruit. They tire easily of something so old school. But they do like the end product.
@@KnottingKnots We're under a stay at home order from the governor here in Louisiana. Only essential services still open. As for the kids, I sure hope so. I learned knitting and rope work from my dad who was in the navy and merchant marines. Growing up on a farm, there was a practical side as well as entertainment aspect. We'd make our own rope and deconstruct new rope, then have to remake it. Splicing and whipping were part of the process of learning rope. I don't know how practical any of that is in this time of overnight delivery. But it was time with my dad that I'll always remember and cherish. Thank you for keeping this skill alive for future generations.
I dont' knwo that I'm either. I'm usually a knitter, crocheter, and Tunisian knitter. But... recently went to a scouting leadership weekend where there was all this paracord and... well being used to having some sort of needle or hook in my hand, I just started playing.... They showed us a Turks head for a neckerchief slide and the directions were difficult to understand. But, that was part of an exercise about following bad directions. I wanted to put some sort of hold around a narrow area of my water bottle but felt I needed a larger Turks head and found you. It was so cool. I made one out of left over styrofoam and toothpicks. That works until my husband can make one out of plastic.
Thanks for taking the time to share this information, I always love to hear about knots being used! You may also be interested in some groups on Facebook. If you type in decorative knots or nautical fancy work or marlinspike sailor, you will see some work that really inspires!
Thank you too! You may also be interested in this blog post where there are a number of Turk's Head Patterns that are free to download: igkt-solent.co.uk/make-your-own-turks-head-tool/
Very nice job on the video in all aspects. One small criticism, it would have been nice to see a close up of the written instructions/pattern/chart at least a few times during the video to get a feel for how it's written. You really are very clear in your instructions and you don't have a lot of excessive yammering on, which I personally appreciate.
Perhaps a bit late, but I this may be what you are looking for: igkt-solent.co.uk/turks-head-chart/ Thanks for taking the time to view and also make a comment, very much appreciated.
Excellent video. I first watched this when I was just starting out in knot tying and didn't know enough to really get the value of the video. I had to make a 6b7l Turk's head knot to go around an old rum bottle a while back and really wish I had remembered this video before I spent a good bit on a large cork cylinder to use as my pinned mandrel. (Which I've used exactly 1 time.)
@@KnottingKnots very true. I lament not thinking about your jig when any board laying about the house could have done the same job as the expensive cork cylinder.
Looking forward to watching all your videos. I have always did well with knots most times better then most. I have been shown a new knot here and there of work. I needed to learn a turk’s head for a gift project.
I love all of your videos Johnny. They are by far the simplest and best explained knot tutorials on RUclips. Wish I could spend an afternoon tying with you.
@@KnottingKnots I'm in the US, treating my insomnia to a healthy dose of knotting videos. I'm sure I could find a close enough group, but I was more commenting on the personality that shows through your work. Seems like you'd make pleasant company.
@Stephen Williams Cheers mate, that is very kind of you. If ever you can, try and handle someone else's work. This way you will get an idea of how firm a completed piece of work is. If you are using natural cordage, then you will also find that hard lay cordage is the best for holding a knot and also makes a knot look better. Hard lay, is a bit like holding out a tape measure, the harder the lay the more it stands out. If you are looking for books with lots of knotting projects, then take a look at Des's book on this page: igkt-solent.co.uk/books/
Great explanation for use of the board and pattern. I’m off the cut a bit of ply and threaded rod! Very very difficult I know for a repetitive operation but the repeated instructions made me chuckle. Must be hundreds of over/unders! Well done man l liked it.
Here is a link, about the TH Jig, there is also a link near the bottom of the page to the Advanced and Simple Knot Grid, where you will be able to create many TH variations: igkt-solent.co.uk/turks-head-chart/
Yes, basically put the Turks Head on the object you want to cover, then go round and gently tight, then again. Do not be tempted to pull it really tight on your first go round. When nice and tight on your object, you can then cut the ends flush, then tuck under. Thanks for taking the time to view and also make a comment, very much appreciated.
@@KnottingKnots Thanks. I am just starting to get into this after years of appreciation for it. I will start with a Turks Head to mark the wheel center rudder position on our sailboat. Just found your videos......very well done, instructive, and clear. Going though the "Knotting Tools" now.
@@gtrevarthen Once you have decorated one thing with the TH, you end up covering anything that move. Have fun doing this hobby and take care of your fingers 😉 😉 😉 Oh yes tools, I love my tools.
The internet is so wonderful! I wanted to learn to make a Turks head back in the nineties so I had to buy a $50.00 book on knot tying. It showed how to make it by starting on the hand and using fingers.
I try! Do you have a video showing how to transfer a knot from a board or tube to something like a dog leash, where it has to be tightened? As you can tell, I'm just a beginner.
I am not sure that you would want a Turks head as long as a dogs lead. However, if you do want to make a long Turks Head take a look at: ruclips.net/video/MGNodpJTdxE/видео.html This particular one can be made longer without too much extra confusion. The only thing is that the number of turns has to be more than three and then always an odd number after that 3, 5, 7, 9 etc.
The reason for it being so good and so clear ist because it's with a brtitsh accent! Which makes it easy to understand. Oh, the video is brilliant! Cheers for that!!!
I think, looking at your profile picture, you are a little biased?? Thanks for taking the time to view and also make a comment, very much appreciated. You will also understand this 2 - 1
I'm fairly new to knot work, except for a little bit when I was young, now I've ordered a few books and started tying a few turks heads and am about to attempt a globe knot, I can't wait to lay in a supply of cord and pick up a few tools, then it'll be practice, practice, practice.
Enjoy the process. Also, keep your old work, so that you can see how far you have come. The best book for learning from is Des Pawson's book on Knot Craft and Rope Mats, if you have not got it, maybe Christmas present? You will not only be tying knots, but collecting tools and books, and leaving little piles of mess all over the place 😉 😉 😉
Have been struggling with Turkshead knots for a while now. Watched your video and loved it. I will make myself a board but wondered if you could tell me where I could print off the step by step instructions for various knots. Any advice much appreciated. Paul Brydon
On this page you will find a link to an advanced and simple knot grid: igkt-solent.co.uk/turks-head-chart/ Thanks for taking the time to view and also make a comment, very much appreciated.
Is the rule for a Turk's Head knot always to skip 3 then 4 as you weave up and down? So if you were to want a 20 bight version, (ignoring the weaving) would it be A1->B4->A8->B11->A15->B18->A2->B5->A9->B12->A16->B19->A3->B6->A10->B13->A17->B20....etc etc? Is there a different pattern based on a different number of bights or does it weave the way I guessed?
You may be interested in this post where you can download some different Turk's Head formulas igkt-solent.co.uk/make-your-own-turks-head-tool/ I will look at a 20 bight Turk's Head and get back to you:
@KnottingKnots at that resource, it looks like their example pattern was in a "3 then 4 then 3 then 4" cadence, which seems to tentatively confirm the notion that "skip 3 then 4 then 3 then 4" while alternating up and down is at least a valid approach to rhe pattern. I guess I'm curious if a THK ALWAYS follows this pattern or if there are other valid variations
If you're going to double or treble the passes, don't over-tighten once you put it to the object you're covering, or you'll make the repeat passes difficult. That final tightening comes once you've completed the repeat passes. Also, if you leave the starter at the edge, it's very evident, so pull it through an over-under and extend the running/working end (the one with the needle on) the same distance at the end. Depending on your line, you may be able to get away with quite a length of "standing end" (that's the other end originally anchored off in the corner) tail under the body of the thing, I'd generally leave at least one "over-under".
Great video and precise instructions. Thanks. One question. If you wanted to alter the diameter of the knot, say to the diameter of a walking stick, can the knot be tightened? Or do you have to make a smaller board?
You do not need a smaller board for smaller Turks Heads. Once you have created the TH on the board, slide the TH off and then slide it onto the object you want to cover. It is just a matter of going round and adding the number of passes that you want, then go round pulling out all the slack till it grips tight. However, if the board is smaller than the object you want to cover, then trying to open out the TH to fit is a problem, so best if board is bigger than object.
I've used a board jig but a PVC pipe jig is so much easier to use and I DIY mine. Hand tie a few short 2B & 4B TH knots first around a wood dowel. Learn about laying tracks and burning tracks. After you understand the "turks head" a PVC pipe jig makes quick work of it. I make walking staff grips from 8B×9P (~1.75"×~1"d) to 8B×27P (~5.25"×~1"d) more Parts ie Leads make longer knots. 8B gives solid cover on a ~1" staff. The 8B with 3× divisor for the Leads make the weaving simple. Lay tracks - burn tracks. OU weave is a breeze on the pipe jig. FYI 8B knot means the pins are set 45° apart on the round 360° pipe. EASY
I think it all depends on what you are most used to. I do like the board for making a Turks Head, but use a cylinder when I make the odd Globe Knot. Thanks for taking the time to view and also make a comment, very much appreciated.
First let me say I enjoyed the video, going to make my own jig. Now for the question, the paper instructions you show where exactly can I get instructions like that. I have found the advanced grid maker and will try that out for sure, however it doesn't generate the instructions you show in the video please tell me where you found those instructions.
Excellent video! Would a curved or arched fid be of any benefit in making a Turk's head on a flat jig like that? The straight fid seems to work well enough for the task. I started my knot adventure as a Scout in the 70's. My Scout master (Mr. F) would be pleased and impressed that those early and clumsy bowlines, sail maker's whipping and square knots he taught us would have helped launch an interest in knots and sailing that has taken some 40 years to reach this point.
I really enjoyed this video and I am going to make one of these jigs whilst I wait for my mandrel to arrive from the US. Please post a link to a site where I can find some recipes. Your videos have been an inspiration! Thank you so much!
Hello David, if you go to this post, part way down is a link to where you can get the recipes: igkt-solent.co.uk/turks-head-chart/ you are looking for the Simple Knot Grid. I see that you also post a comment on that site, will answer nowish.................... what branch were you in the Mob?
Good work. Keep the vids coming. Round jigs are much easier to use. I make mine of PVC/40 plmb pipe. Various diameter pipes make for using less cord with less waste when tightening onto a designated object. I believe beginners should start on their hand then an unmarked mandrel with no pins. Tie freehand and learn how to expand and lengthen knots. As you become more proficient there is no better background than understanding of "laying the track / burning the track". Though I have tied many hundreds of turks head knots, the hardest most frustrating thing is tighten, tighten, tighten and hide tucks. Tying and interweaving are fun. Tightening is work.
Hello Gerard, thanks for viewing and making a comment. There will be videos in the future using the PVC pipe method. Yes, the Turks head is great until you have a massive one that takes longer to tighten than actually create. Globe knots also come under this frustrating catagory.
I have fishing rods custom made in Los Angeles California and they have Turks head knots on them & for 30 years now I have been fishing with them & curious on how to make this knot. One knot has about a 1 inch inside diameter & the other is around one & five eighths inch ID. how do I start it on something round like a fishing rod & how do I sinch the string down tight to prepare to apply a clear epoxy and use 4 different colors of string. Red, Blue, white with a little yellow to represent the Philippines flag.
You might find this Turks head useful, as you do not need a jig like above: igkt-solent.co.uk/5-bight-4-lead-turks-head/ I will also did out an even easier 4 bight version.............
Great video & instructions, Am I correct in assuming that if I want a 3 bight turks head, that I would follow the first 6 steps? That would take me to B2 OU A6...
If you want three bights you would set up the board so that there are two pins top and bottom and one on the end. Then follow the pattern for a 3 bight x number of leads. You may be interested in this link, then on that page there is also a link to the advanced grid maker: igkt-solent.co.uk/turks-head-chart/
Best turk’s head jig board explanation out there! Is your needle have a threaded hole or twisting the cord just help it go in better. Thanks for sharing.
Yes, it's called a lacing needle and it has a threaded hole to help grip the cord. They obviously come in different sizes to suit the cord/rope diameter.
That jig is pretty cool but I'm looking for how to make a long turk's head knot but all I'm finding is all this talk about bights and leads. No one (according to what I've found thus far) ever talks about the length of the finished knot. I would like to know how to make a 1-3 foot (30-90cm) long turk's head knot.
Thanks for posting this board. I was going to buy a flat knitting loom from the craft store but now I know it wouldn't have worked because both sides need to be used. I don't think both sides have holes and pegs. Back to the drawing board. I think I'll just buy one on line. Your instructions were well explained.
Hey Angie, glad that you dropped by and left a comment. There is another version where you just use one side of the board, but you do not see much about that version. I think if you wanted a Turks Head Jig, you either get the round ones made of PVC pipe or go for a flat one like in the video. Got any pictures of your work that I can see?
Cheers!! Actually I have a blind person who listens to my videos with his young daughter, who guides him. Between us three he learns to tie new knots. Thanks for the kind words.
Thank you for an excellent tutorial. I am making wine bottle candle globes and am wanting an expanded Turks head to line the outside of the bottle. Can I assume that the distance between A & B could act as a rough diameter (in my example) for a wine bottle approx. 3" dia.
That's beautiful - something complex made simple. Thanks! (I made my first THs last night on my hand, following your video for making a side fender... so now I'm growing more ambitious!) What can you use them for, though? I have a couple of ideas for around the boat, but I need more.
Now you will be able to cover everything that moves, with a Turks Head! Thanks for taking the time to view and also make a comment, very much appreciated.
Hello, I'll start off by saying you make very good tutorials keep up the great work. I began obsessing over knot's just 2 weeks ago and I'm now a full blown 'Paracorder" (If that's a thing). I'm going to be making a Jig of my own using this concept, I'm assuming if I make mine a bit bigger in both direction and add more pins it will allow me to make larger Knot's correct? Also Apparently the Turk's head cook book and the globe knot cook book are no longer available to purchase, at least for the time being. Could you please direct me to a place where I can easily acquire the codes/diagrams or to a place I could actually purchase or acquire those books?
Yes, it is rather addictive and sore on the fingers! If you go to this post, it mentions the advanced and simple knot grid link, which will take you to a place where all variants of the Turks Head can be made: igkt-solent.co.uk/turks-head-chart/
In the early days it is very difficult to judge!! When I first started out I would under estimate and be very frustrated when the cordage ran out. Gradually over time I would become more expert in guessing the amount of cordage needed. I am sure that out there, there is a formula, but I personally just work it out in my mind from past experience. Thanks for taking the time to view and also make a comment, very much appreciated. Are you more of a practical or decorative knotter?
It was made by a guy called PJ in the States, but I don't think he does them any more. However, an Internet search for custom spike, should bring up a few good makers of them. Thanks for taking the time to view and also make a comment, very much appreciated.
Dear Johnny, It looks as if a jig is not hard to make for any number N bights, producing a TH knot of N+1 leads. Is it possible to make a jig with N bights and NOT N+1 leads? Thanks for any information!
On the jig, the pegs dictate the number of bights that you want. When you follow a particular formula, this will dictate the number of leads. You may be interested in this post: igkt-solent.co.uk/turks-head-chart/
On this blog post part way down you will see a link to Advanced and Simple Knot Grid igkt-solent.co.uk/turks-head-chart/ Let me know if you have any problems finding it?
Content que tu aies aimé, merci d'avoir pris le temps de laisser un commentaire. Êtes-vous capable de me montrer une partie de votre travail, comme j'aime vraiment voir les autres peuples? Vous pouvez glisser et déposer une photo ici, s'il vous plaît: goo.gl/mQgf8E
It used to be a part of the Turks Head Cookbook, sadly no longer available, What country are you in as I know someone who might still be making them? Or I can send you the dimensions?
@@ruggedrickrude1946 If you are on Facebook, there is a guy in the States who makes useful tools: facebook.com/jack.hicks.102 or the dimensions of the tool can be found here: igkt-solent.co.uk/turks-head-chart/ and a Happy New Year to you too 😉 😉 😉
Hi, where did you find your turk's head instructions? (The ones saying over and under). I have searched ALL OVER the internet and have not found a single one... I made a board so that I could make a 4 bight turks head, but I haven't been able to find the instructions to actually make the turks head... :(
Thank for popping over and leaving a comment. I personally got my grip from the Turks Head Cookbook, but there is also a Grid Maker and a video on how to use it here: freakinsweetapps.com/knots/knotgrid/ There is a link on that page to the Advanced Grid Maker also.
@@KnottingKnots The Burrhus books AND jigs are really a great work by Don. I bought both several years ago and can say they are like the "bible on the subject. I am glad I found your channel thought, as you do a great job of demonstrating the work!
@@ffmedic1638 Thanks for leaving a comment. There was talk about a year ago that someone would try to get permission to print the books again. Sadly, I do not think that this came to anything. As you say they are great books and tools!
I enjoyed your video even though its not much different than the ones produced by Don B. himself. I was wondering if you could possibly cover one of the knots from the book that has a couple turns round the board first. I own this jig from Don B and his 2 books for the full kit.. not sure how you managed to get the paracord through that wee hole... I've not been able to since the tool I believe was designed for smaller cord. Would love to see more from you on this tool, I personally mainly use it for the more weird and not traditional designs, however, it does make the work nice and neat from the start.
Thanks for watching and taking the time to leave a comment. I think that my board may be a later design, as paracord seems to fit very well into the hole. Yes, I can see that going twice around the board does cause a bit of confusion. I am not sure whether or not I will be making a video on this, as I don't think the kit is available anymore. I have tried to contact Done on a regular basis, but I never get a response. I too only really use the tool for more intricate Turks Heads. Would love to see some of your work if possible?
I did this braiding right on the staff never heard the board technique before curious question how do you control diameter is it just the size of the board and when you're doing multiple passes is it always going to be easier to tighten on the object had a hard time pushing my threading needle through glass pass
In the good old days it was so easy to get hold of, these days it seems to be extremely difficult. If you are really interested in some of the previous comment, there are dimensions for making one.
When i started out, it was a pain in my ass, and took awhile to get how to do em in my hand. After several yrs, i can do em blindfolded. Now I've seen alotta jigs and mandrels, and these look more of a pain than by hand.
If I recall correctly at the bottom of this post is the pattern you may be looking for: igkt-solent.co.uk/fender-making-rope-side-fender/ The video should also show it being made on the hand.
I think that this video will help you to work out the leads: ruclips.net/video/1CQ5Mf0jeys/видео.html there is also a chart here that shows what is possible in Leads and Bights combinations: igkt-solent.co.uk/turks-head-chart/
Hi Johnny, I am extremely new to this and I am enjoying your videos, very clear and informative, I want to make fancy key fobs using crown senet and turks head knots , and seel them for a local charity, instead of paracord what type of rope could you use and where do you get it from , I would like to keep the cost as low as possible, more money for charity :) many thanks
Hello Sammy, thanks for popping over and leaving a comment. Sorry not to answer your question straight away, but I need to know what country you are in to answer in full?
OK, that makes things a bit easier. As a decorative knotter I always want the best cordage, and in the good old days "Belfast Cord" was the best, but does not exist anymore. So the best quality stuff can be obtained from Mikko Snellman, here is a link to that video, which also has contact details: ruclips.net/video/DVBogjW6kxo/видео.html Another supplier may be www.cordsandropes.com/ they are recommended in a group that I am in. One thing you will find is that cord can be rather expensive, this is why people usually stick to Paracord.
I usually use 3mm paracord, which is a little more delicate than the 550 stuff and I get it here on Amazon: amzn.to/2sLQSm1 or here on eBay: rover.ebay.com/rover/1/710-53481-19255-0/1?ff3=4&toolid=11800&pub=5575285280&campid=5338064521&mpre=http%3A%2F%2Fwww.ebay.co.uk%2Fitm%2FArmy-Military-100m-Paracord-Reel-3mm-Basha-Tent-Bivi-Camping-Guy-Rope-Para-Cord-%2F381150398024%3Fvar%3D%26epid%3D1258047597%26hash%3Ditem58be558648%3Am%3Amio-_0PVwCLWSXWbgUUVYfg
Thanks so much for doing this video. I could NOT figure out how ppl knew to go over and under which strands. Lol. Watching the video makes so much sense. This is just a weaving pattern. Duh! 😂 Now...where do I get the board. Because I do “knot” want to use my hands again. 🤪
There is more information on a knot board here: igkt-solent.co.uk/turks-head-chart/ Thanks for taking the time to view and also make a comment, very much appreciated.
Part way down on this post, you will see the heading, Simple and Advanced Turks Head Knot Grid. There is a link on that to both of them: igkt-solent.co.uk/turks-head-chart/ I think there is also a video on that site on how to use them??
In this blog post you will find a link to the Simple Grid Knot, that is where you can input the number of Bights and Leads that you want to make: igkt-solent.co.uk/turks-head-chart/
Aha, I see there is the question. Sorry, the message reminders were sent to me in the wrong order. I now know what the question is! Thanks for popping over and leaving a comment. Would love to see some of your work, anywhere I can see it?
I personally use a long 2 bight Turks head: igkt-solent.co.uk/bight-multi-lead-turks-head-covering-knot-tutorial/ or the long 4 bight Turks head, which is slightly harder: igkt-solent.co.uk/turks-head-4-bight-long/
There is a photo and a dimensions on this blog post: igkt-solent.co.uk/turks-head-chart/ Thanks for taking the time to view and also make a comment, very much appreciated.
I usually start where the top lead enters the Turk's head, just gently pull it up tight, but not too much to actually pull the cord through, as you go round pull out any slack, but do not over pull. Keep going round and eventually you will get to the next row, keep going round and pulling up. You will then end up on your final row, do the same again. Then back to the beginning and start the process again. Eventually you will end up with a really tight Turks Head on you object. Finally, cut the two ends (or more if using more passes in different colours). Cut them flush and then gently push the ends under the weave, so as to hide them. Thanks for taking the time to view and also make a comment, very much appreciated.
I got mine from a guy in the States. A search on Instagram #marlinspike will bring up a lot of results of people in the States who make them. Or you can link up with me on FB and I will pass over a link to the guy that made mine? facebook.com/john.peart.798
*Turks Head Jig and More Patterns* If you want more information on the Turks Head/Jig or Board, or want some more Turks Head Patterns: igkt-solent.co.uk/make-your-own-turks-head-tool/
A couple of pro tips:
1) There are holes in the edges of the jig so that it can be used to make THKs with odd numbers of bights.
2) Start with only half your length of cord through the pilot hole to reduce the amount line to be pulled under each time. After taking the knot off the jig, double and treble the knot in the other direction with the other end of the cord.
3) Use a crochet hook to pull the line under each time. Reduces the time spent dealing with twisted cord.
I've invested a lot of time memorizing how to tie various TH base knots in hand or around a piece of work and then how to expand them but I still use a jig when I can because the knot ends up more uniform. Saves time fairing it up.
Cheers for that Roger, I will pin your post to the top so others may benefit from the advice.
Roger Bank
David Clements is this a game of writing names or do you know Roger Banks, the loveable rogue?
Johnny Debt
That's what the kids do now when they agree with what the writer said. Instead of using their words...
Where did you find the instructions that you eluded to for using this jig. Have been trying to find the cookbooks that are now out of print. What changes a Turks head into a globe covering knot?
I have seen many tutorial vids for knots. This is one of the best, hands down. I just easily tied this and will be making a flat pendant with knitting cord with it. Many thanks!
Fantastic video, and with your instructions, I made my own template, and have also completed my first proper 8 bight turks head...
Thankyou again.....👍
Oh dear, what have you now done???............... If you were like me, you end up covering everything that is round with a Turks Head. There is nothing better than seeing your work adorning something. Oh yeah, forgot to ask, are the fingers getting sore?
@@KnottingKnots thankyou from the comments, I'm an ex sailor, but have only recently got back into knotting, and love to just sit and Potter with paracord, I'm interested in the turks head, and globe knots, for bell Ropes, once again, great videos, very informative, I just need the tempted for lesser bight now, lol, and I will be knotting mad, and yes, the fingers are tingling...lol...
Keep up the great work.......
Do you have a Facebook page...
All the best..
Alan.......👍👍
@@TheDodger147 which Navy were you in Alan, I am ex RN.
@@KnottingKnots Royal.....
1985-98......
@@KnottingKnots I sorta gathered that, listening to your videos.....LIKE SO.....lol....
Common saying in some branches....lol
These knots have confused me for a very long time. However, after watching your video, I made my first turks head knot. Yay! Thank you so much. I'll send you a pic when I'm all finished with my project. Thanks again.
Nothing better than a successful Turks Head!! Maybe a Star Knot next?
Excellent lesson, I took an interest in this stuff many years ago as a young merchant seaman working on general cargo ships, normally following the Ashley book of fancy knots and rope work. You are doing a top job of helping to revisit these almost forgotten but loved skills.
I find that knotting brings back lots of memories. Thanks for taking the time to view and also make a comment, very much appreciated.
What a fantastic tutorial! You made what seemed impossible, possible! Love it!!
Thank you so much! If you are thinking of making your own tool and need some more patterns, you can find them here: igkt-solent.co.uk/make-your-own-turks-head-tool/ Thanks for taking the time to view and also make a comment, very much appreciated.
Great videos, and tutorials, can I ask, how big was the jig, and spacings for the pins....
Keep up the great work......
Hello Alan, the dimensions of the board can be found on the following link, then for hole spacing, just make 9 holes equidistant apart. Thanks for taking the time to view and also make a comment, very much appreciated. Here is the blog post: igkt-solent.co.uk/turks-head-chart/
@@KnottingKnots thankyou very much......👍
You always make these seemingly complex things much simpler. Thank you !
Ah, you want to see the mess I get into as I am filming. Sometimes I go to tie the simplest of knots and then there is a pause on the film, followed by "Oh bollocks".
Johnny Debt well, I used to do philosophy videos and those were tough. I can totally understand and appreciate the work you put into these videos.
Just made my jig out of cardboard and push pins. Easy to follow tutorial. Thank you for your time and effort.
Thanks for taking the time to view and also make a comment, very much appreciated. Are you more of a practical or decorative knotter?
Johnny Debt I do a little bit of both. I’ve wrapped everything from walking sticks to hammers and hatchets. I’ve also done lots of bracelets and key fobs. Always looking for original ideas to replicate. I’m attempting to pass this skill on to my 3 kids. Alas, that process is bearing little fruit. They tire easily of something so old school. But they do like the end product.
@@jeffbeckman3525 Not sure where you are in the world. However, if you are in lock down, maybe the kids will be more eager in the future?
@@KnottingKnots We're under a stay at home order from the governor here in Louisiana. Only essential services still open. As for the kids, I sure hope so.
I learned knitting and rope work from my dad who was in the navy and merchant marines. Growing up on a farm, there was a practical side as well as entertainment aspect. We'd make our own rope and deconstruct new rope, then have to remake it. Splicing and whipping were part of the process of learning rope.
I don't know how practical any of that is in this time of overnight delivery. But it was time with my dad that I'll always remember and cherish.
Thank you for keeping this skill alive for future generations.
@@jeffbeckman3525 Every family should have a sailor in it, I personally was Royal Navy. Wishing you all the best during this time.
Thank you. I am new to scouting (my son) and this makes Turks heads seem SO much easier than our scout leader described.
Thanks for taking the time to view and also make a comment, very much appreciated. Are you more of a practical or decorative knotter?
I dont' knwo that I'm either. I'm usually a knitter, crocheter, and Tunisian knitter. But... recently went to a scouting leadership weekend where there was all this paracord and... well being used to having some sort of needle or hook in my hand, I just started playing.... They showed us a Turks head for a neckerchief slide and the directions were difficult to understand. But, that was part of an exercise about following bad directions. I wanted to put some sort of hold around a narrow area of my water bottle but felt I needed a larger Turks head and found you. It was so cool. I made one out of left over styrofoam and toothpicks. That works until my husband can make one out of plastic.
Thanks for taking the time to share this information, I always love to hear about knots being used! You may also be interested in some groups on Facebook. If you type in decorative knots or nautical fancy work or marlinspike sailor, you will see some work that really inspires!
Very nice video! Thank you so much.
Thank you too! You may also be interested in this blog post where there are a number of Turk's Head Patterns that are free to download: igkt-solent.co.uk/make-your-own-turks-head-tool/
Very nice job on the video in all aspects. One small criticism, it would have been nice to see a close up of the written instructions/pattern/chart at least a few times during the video to get a feel for how it's written. You really are very clear in your instructions and you don't have a lot of excessive yammering on, which I personally appreciate.
Perhaps a bit late, but I this may be what you are looking for: igkt-solent.co.uk/turks-head-chart/ Thanks for taking the time to view and also make a comment, very much appreciated.
Excellent video. I first watched this when I was just starting out in knot tying and didn't know enough to really get the value of the video.
I had to make a 6b7l Turk's head knot to go around an old rum bottle a while back and really wish I had remembered this video before I spent a good bit on a large cork cylinder to use as my pinned mandrel. (Which I've used exactly 1 time.)
It translates easily to a cylinder, you follow the same formula. Thanks for taking the time to view and also make a comment, very much appreciated.
@@KnottingKnots very true. I lament not thinking about your jig when any board laying about the house could have done the same job as the expensive cork cylinder.
Brilliant video. Very easy to understand. Thank you very much.
Glad it was helpful! You may also like this blog post where you can download different patterns: igkt-solent.co.uk/make-your-own-turks-head-tool/
Well explained! You're a great teacher! Thank you.
Glad it was helpful! You may be interested in this blog post: igkt-solent.co.uk/make-your-own-turks-head-tool/
Looking forward to watching all your videos. I have always did well with knots most times better then most. I have been shown a new knot here and there of work. I needed to learn a turk’s head for a gift project.
I love all of your videos Johnny. They are by far the simplest and best explained knot tutorials on RUclips. Wish I could spend an afternoon tying with you.
Thanks for your comment. What country are you in, as there may be a group I know about near you?
@@KnottingKnots I'm in the US, treating my insomnia to a healthy dose of knotting videos. I'm sure I could find a close enough group, but I was more commenting on the personality that shows through your work. Seems like you'd make pleasant company.
@Stephen Williams Cheers mate, that is very kind of you. If ever you can, try and handle someone else's work. This way you will get an idea of how firm a completed piece of work is. If you are using natural cordage, then you will also find that hard lay cordage is the best for holding a knot and also makes a knot look better. Hard lay, is a bit like holding out a tape measure, the harder the lay the more it stands out. If you are looking for books with lots of knotting projects, then take a look at Des's book on this page: igkt-solent.co.uk/books/
Great explanation for use of the board and pattern. I’m off the cut a bit of ply and threaded rod! Very very difficult I know for a repetitive operation but the repeated instructions made me chuckle. Must be hundreds of over/unders! Well done man l liked it.
Here is a link, about the TH Jig, there is also a link near the bottom of the page to the Advanced and Simple Knot Grid, where you will be able to create many TH variations: igkt-solent.co.uk/turks-head-chart/
Thanks for the video. Great stuff. How do you secure the ends once tightened? Just tucked in?
Yes, basically put the Turks Head on the object you want to cover, then go round and gently tight, then again. Do not be tempted to pull it really tight on your first go round. When nice and tight on your object, you can then cut the ends flush, then tuck under. Thanks for taking the time to view and also make a comment, very much appreciated.
@@KnottingKnots Thanks. I am just starting to get into this after years of appreciation for it. I will start with a Turks Head to mark the wheel center rudder position on our sailboat. Just found your videos......very well done, instructive, and clear. Going though the "Knotting Tools" now.
@@gtrevarthen Once you have decorated one thing with the TH, you end up covering anything that move. Have fun doing this hobby and take care of your fingers 😉 😉 😉 Oh yes tools, I love my tools.
The internet is so wonderful! I wanted to learn to make a Turks head back in the nineties so I had to buy a $50.00 book on knot tying. It showed how to make it by starting on the hand and using fingers.
Yes, we have come a long way since the 90's, not sure I like all the ways that we are heading in. Thanks for taking the time to leave a comment.
So helpful. Thanks! I'm learning wraps almost solely off your videos. 👍
I really need to make that jig!
That is so good to hear, would love to see some of your work. You can drag and drop a photo here, please: goo.gl/mQgf8E
Really clear instructions - well done! A lot of people can't break the knot down into really useful steps, but you've done it. Thank you!
Really pleased that you took the time to leave a comment, it really is appreciated. I take it that you are a decorative knotter?
I try! Do you have a video showing how to transfer a knot from a board or tube to something like a dog leash, where it has to be tightened? As you can tell, I'm just a beginner.
I am not sure that you would want a Turks head as long as a dogs lead. However, if you do want to make a long Turks Head take a look at: ruclips.net/video/MGNodpJTdxE/видео.html This particular one can be made longer without too much extra confusion. The only thing is that the number of turns has to be more than three and then always an odd number after that 3, 5, 7, 9 etc.
The reason for it being so good and so clear ist because it's with a brtitsh accent! Which makes it easy to understand. Oh, the video is brilliant! Cheers for that!!!
I think, looking at your profile picture, you are a little biased?? Thanks for taking the time to view and also make a comment, very much appreciated. You will also understand this 2 - 1
@@KnottingKnots no mate! Not biased, just think you speak a very clear accent, I have heard other! And I'm sure it was 2-0!!! 🤣😂👍💪
@@1980thehammer Oh yes it was!!! I was thinking to what they predicted. Was good to see after so long, we were not making a mess of it.
@@KnottingKnots correct! It was a very good game! And yes it has been q long time since germany hat to go because of the brits!
I'm fairly new to knot work, except for a little bit when I was young, now I've ordered a few books and started tying a few turks heads and am about to attempt a globe knot, I can't wait to lay in a supply of cord and pick up a few tools, then it'll be practice, practice, practice.
Enjoy the process. Also, keep your old work, so that you can see how far you have come. The best book for learning from is Des Pawson's book on Knot Craft and Rope Mats, if you have not got it, maybe Christmas present? You will not only be tying knots, but collecting tools and books, and leaving little piles of mess all over the place 😉 😉 😉
Have been struggling with Turkshead knots for a while now. Watched your video and loved it. I will make myself a board but wondered if you could tell me where I could print off the step by step instructions for various knots. Any advice much appreciated. Paul Brydon
On this page you will find a link to an advanced and simple knot grid: igkt-solent.co.uk/turks-head-chart/ Thanks for taking the time to view and also make a comment, very much appreciated.
Nice instructions I can follow you with it. Thanks
Glad it was helpful! Thanks for taking the time to view and also make a comment, very much appreciated.
Is the rule for a Turk's Head knot always to skip 3 then 4 as you weave up and down?
So if you were to want a 20 bight version, (ignoring the weaving) would it be A1->B4->A8->B11->A15->B18->A2->B5->A9->B12->A16->B19->A3->B6->A10->B13->A17->B20....etc etc?
Is there a different pattern based on a different number of bights or does it weave the way I guessed?
You may be interested in this post where you can download some different Turk's Head formulas igkt-solent.co.uk/make-your-own-turks-head-tool/ I will look at a 20 bight Turk's Head and get back to you:
@KnottingKnots at that resource, it looks like their example pattern was in a "3 then 4 then 3 then 4" cadence, which seems to tentatively confirm the notion that "skip 3 then 4 then 3 then 4" while alternating up and down is at least a valid approach to rhe pattern. I guess I'm curious if a THK ALWAYS follows this pattern or if there are other valid variations
If you're going to double or treble the passes, don't over-tighten once you put it to the object you're covering, or you'll make the repeat passes difficult. That final tightening comes once you've completed the repeat passes.
Also, if you leave the starter at the edge, it's very evident, so pull it through an over-under and extend the running/working end (the one with the needle on) the same distance at the end. Depending on your line, you may be able to get away with quite a length of "standing end" (that's the other end originally anchored off in the corner) tail under the body of the thing, I'd generally leave at least one "over-under".
Great video and precise instructions. Thanks. One question. If you wanted to alter the diameter of the knot, say to the diameter of a walking stick, can the knot be tightened? Or do you have to make a smaller board?
You do not need a smaller board for smaller Turks Heads. Once you have created the TH on the board, slide the TH off and then slide it onto the object you want to cover. It is just a matter of going round and adding the number of passes that you want, then go round pulling out all the slack till it grips tight. However, if the board is smaller than the object you want to cover, then trying to open out the TH to fit is a problem, so best if board is bigger than object.
Easiest tutorial I have seen in 2 weeks of searching utube
Of course!! :-) Thanks for taking the time to view and also make a comment, very much appreciated.
I've used a board jig but a PVC pipe jig is so much easier to use and I DIY mine. Hand tie a few short 2B & 4B TH knots first around a wood dowel. Learn about laying tracks and burning tracks. After you understand the "turks head" a PVC pipe jig makes quick work of it. I make walking staff grips from 8B×9P (~1.75"×~1"d) to 8B×27P (~5.25"×~1"d) more Parts ie Leads make longer knots. 8B gives solid cover on a ~1" staff. The 8B with 3× divisor for the Leads make the weaving simple. Lay tracks - burn tracks. OU weave is a breeze on the pipe jig. FYI 8B knot means the pins are set 45° apart on the round 360° pipe. EASY
I think it all depends on what you are most used to. I do like the board for making a Turks Head, but use a cylinder when I make the odd Globe Knot. Thanks for taking the time to view and also make a comment, very much appreciated.
First let me say I enjoyed the video, going to make my own jig. Now for the question, the paper instructions you show where exactly can I get instructions like that. I have found the advanced grid maker and will try that out for sure, however it doesn't generate the instructions you show in the video please tell me where you found those instructions.
I have been wondering the same thing! Where you able to find these resources?
Thank you for the clear and easy explanation... it was a huge help.
Glad it helped! Thanks for taking the time to view and also make a comment, very much appreciated.
Excellent video!
Would a curved or arched fid be of any benefit in making a Turk's head on a flat jig like that? The straight fid seems to work well enough for the task.
I started my knot adventure as a Scout in the 70's. My Scout master (Mr. F) would be pleased and impressed that those early and clumsy bowlines, sail maker's whipping and square knots he taught us would have helped launch an interest in knots and sailing that has taken some 40 years to reach this point.
Sooooo much easier doing this on a board than a Rod….thank you!
Yes, as a board is just a flat tube ;-) Thanks for taking the time to view and also make a comment, very much appreciated.
I really enjoyed this video and I am going to make one of these jigs whilst I wait for my mandrel to arrive from the US.
Please post a link to a site where I can find some recipes.
Your videos have been an inspiration! Thank you so much!
Hello David, if you go to this post, part way down is a link to where you can get the recipes: igkt-solent.co.uk/turks-head-chart/ you are looking for the Simple Knot Grid. I see that you also post a comment on that site, will answer nowish.................... what branch were you in the Mob?
@@KnottingKnots - Thanks. That is excellent. I've bookmarked both calcators! Thank you!!
Good work. Keep the vids coming. Round jigs are much easier to use. I make mine of PVC/40 plmb pipe. Various diameter pipes make for using less cord with less waste when tightening onto a designated object. I believe beginners should start on their hand then an unmarked mandrel with no pins. Tie freehand and learn how to expand and lengthen knots. As you become more proficient there is no better background than understanding of "laying the track / burning the track". Though I have tied many hundreds of turks head knots, the hardest most frustrating thing is tighten, tighten, tighten and hide tucks. Tying and interweaving are fun. Tightening is work.
Hello Gerard, thanks for viewing and making a comment. There will be videos in the future using the PVC pipe method. Yes, the Turks head is great until you have a massive one that takes longer to tighten than actually create. Globe knots also come under this frustrating catagory.
I have fishing rods custom made in Los Angeles California and they have Turks head knots on them & for 30 years now I have been fishing with them & curious on how to make this knot. One knot has about a 1 inch inside diameter & the other is around one & five eighths inch ID. how do I start it on something round like a fishing rod & how do I sinch the string down tight to prepare to apply a clear epoxy and use 4 different colors of string. Red, Blue, white with a little yellow to represent the Philippines flag.
You might find this Turks head useful, as you do not need a jig like above: igkt-solent.co.uk/5-bight-4-lead-turks-head/ I will also did out an even easier 4 bight version.............
I just found this rather embarrassing old video that I did, but it is still relevant and easy to tie: ruclips.net/video/6pL0HHYciQc/видео.html
Thank you very good tutorial, where can I find instructions for other sizes of Turks heads
I have a blog post here: igkt-solent.co.uk/make-your-own-turks-head-tool/ where you can download a PDF on different sized Turk's Heads.
Great video & instructions, Am I correct in assuming that if I want a 3 bight turks head, that I would follow the first 6 steps? That would take me to B2 OU A6...
If you want three bights you would set up the board so that there are two pins top and bottom and one on the end. Then follow the pattern for a 3 bight x number of leads. You may be interested in this link, then on that page there is also a link to the advanced grid maker: igkt-solent.co.uk/turks-head-chart/
Best turk’s head jig board explanation out there! Is your needle have a threaded hole or twisting the cord just help it go in better. Thanks for sharing.
Yes, it's called a lacing needle and it has a threaded hole to help grip the cord. They obviously come in different sizes to suit the cord/rope diameter.
That jig is pretty cool but I'm looking for how to make a long turk's head knot but all I'm finding is all this talk about bights and leads. No one (according to what I've found thus far) ever talks about the length of the finished knot. I would like to know how to make a 1-3 foot (30-90cm) long turk's head knot.
thanks that was very helpful
Do you have a TH jig/board?
@@KnottingKnots i do now...thank you
Could not find the link to your knotting diagram that was used in your video. Where is it???
Yes sorry. when G+ ended I lost a lot of links. You can now find the chart here: igkt-solent.co.uk/turks-head-chart/
Thank You! Well done!!
Gosh, not seen you for a while, how are you?
Brilliant very clear instructions thank you
Useful... I want to make interesting grips for my walking sticks and staffs ... guess I’ll be making a jig first.. thanks
Try this video, no need for a jig: ruclips.net/video/hEeQVupsr1g/видео.html
best explanation i have seen - thanks for the effort
Thanks for taking the time to view and also make a comment, very much appreciated. Are you more of a practical or decorative knotter?
That made it a lot easier thanks
Glad it helped. Thanks for taking the time to view and also make a comment, very much appreciated.
Thanks for posting this board. I was going to buy a flat knitting loom from the craft store but now I know it wouldn't have worked because both sides need to be used. I don't think both sides have holes and pegs. Back to the drawing board. I think I'll just buy one on line. Your instructions were well explained.
Hey Angie, glad that you dropped by and left a comment. There is another version where you just use one side of the board, but you do not see much about that version. I think if you wanted a Turks Head Jig, you either get the round ones made of PVC pipe or go for a flat one like in the video. Got any pictures of your work that I can see?
Thank you, JOHNNY for your wonderful videos. Your patient teaching abilities are certainly commendable.
Cheers!! Actually I have a blind person who listens to my videos with his young daughter, who guides him. Between us three he learns to tie new knots. Thanks for the kind words.
Muy didáctico excelente Gracias
Muito obrigado pelo tutorial! Sempre via essas " ferramentas" e não compreendia nada! Kkk Parabéns pelo trabalho!
Obrigado por reservar um tempo para visualizar e também fazer um comentário, muito apreciado.
Thank you for an excellent tutorial. I am making wine bottle candle globes and am wanting an expanded Turks head to line the outside of the bottle. Can I assume that the distance between A & B could act as a rough diameter (in my example) for a wine bottle approx. 3" dia.
Johnny
You done a great job helping me with this. Great teaching
Thank you so much for your kind words Jackie. If you have any work that I can see, 💥 SHARE YOUR PHOTOS: goo.gl/photos/tERae6pLZH6TezcD6
That's beautiful - something complex made simple. Thanks! (I made my first THs last night on my hand, following your video for making a side fender... so now I'm growing more ambitious!) What can you use them for, though? I have a couple of ideas for around the boat, but I need more.
Have a look at Des Pawson's Knotcraft and Rope Mats. He's been making bow puddings for the RNLI, too.
Simply the best better than all the rest.
You might also like this blog post, there are also patterns to download: igkt-solent.co.uk/make-your-own-turks-head-tool/
@@KnottingKnots Thank you so much. Please keep on making your excellent videos,
Wow this is actually very informative
Thanks for taking the time to view and also make a comment, very much appreciated. Are you more of a practical or decorative knotter?
awesomely helpful. thank you.
Nice, very helpful.
Now you will be able to cover everything that moves, with a Turks Head! Thanks for taking the time to view and also make a comment, very much appreciated.
Hello, I'll start off by saying you make very good tutorials keep up the great work. I began obsessing over knot's just 2 weeks ago and I'm now a full blown 'Paracorder" (If that's a thing).
I'm going to be making a Jig of my own using this concept, I'm assuming if I make mine a bit bigger in both direction and add more pins it will allow me to make larger Knot's correct? Also Apparently the Turk's head cook book and the globe knot cook book are no longer available to purchase, at least for the time being. Could you please direct me to a place where I can easily acquire the codes/diagrams or to a place I could actually purchase or acquire those books?
Yes, it is rather addictive and sore on the fingers! If you go to this post, it mentions the advanced and simple knot grid link, which will take you to a place where all variants of the Turks Head can be made: igkt-solent.co.uk/turks-head-chart/
Over the many years I've been watching how-to videos about tying 550 cord, the most oft-preferred name seems to be "paracordist."
Thanks for a Nice video. One thing that I Wonder about, and that is, how long should the cord be when you start. Regards Knut from Norway
In the early days it is very difficult to judge!! When I first started out I would under estimate and be very frustrated when the cordage ran out. Gradually over time I would become more expert in guessing the amount of cordage needed. I am sure that out there, there is a formula, but I personally just work it out in my mind from past experience. Thanks for taking the time to view and also make a comment, very much appreciated. Are you more of a practical or decorative knotter?
Where did you find your tri-color marlin spike with what looks like a brass ball end, and what is the beautiful knot you used to cover the handle?
It was made by a guy called PJ in the States, but I don't think he does them any more. However, an Internet search for custom spike, should bring up a few good makers of them. Thanks for taking the time to view and also make a comment, very much appreciated.
Dear Johnny, It looks as if a jig is not hard to make for any number N bights, producing a TH knot of N+1 leads. Is it possible to make a jig with N bights and NOT N+1 leads?
Thanks for any information!
On the jig, the pegs dictate the number of bights that you want. When you follow a particular formula, this will dictate the number of leads. You may be interested in this post: igkt-solent.co.uk/turks-head-chart/
Great video! But where do you get the recipes for the different Turks Heads? Did not find good instructions on the internet..
On this blog post part way down you will see a link to Advanced and Simple Knot Grid igkt-solent.co.uk/turks-head-chart/ Let me know if you have any problems finding it?
Merci et bravo, trés beau tutorial
Content que tu aies aimé, merci d'avoir pris le temps de laisser un commentaire. Êtes-vous capable de me montrer une partie de votre travail, comme j'aime vraiment voir les autres peuples? Vous pouvez glisser et déposer une photo ici, s'il vous plaît: goo.gl/mQgf8E
Is this a premade item to buy from someone or do you make and sell them Thanks
It used to be a part of the Turks Head Cookbook, sadly no longer available, What country are you in as I know someone who might still be making them? Or I can send you the dimensions?
@@KnottingKnots thanks for reply I am in ATLANTA GEORGIA USA early
HAPPY NEW YEAR
@@ruggedrickrude1946 If you are on Facebook, there is a guy in the States who makes useful tools: facebook.com/jack.hicks.102 or the dimensions of the tool can be found here: igkt-solent.co.uk/turks-head-chart/ and a Happy New Year to you too 😉 😉 😉
Hi, where did you find your turk's head instructions? (The ones saying over and under). I have searched ALL OVER the internet and have not found a single one... I made a board so that I could make a 4 bight turks head, but I haven't been able to find the instructions to actually make the turks head... :(
Thank for popping over and leaving a comment. I personally got my grip from the Turks Head Cookbook, but there is also a Grid Maker and a video on how to use it here: freakinsweetapps.com/knots/knotgrid/ There is a link on that page to the Advanced Grid Maker also.
@@KnottingKnots The Burrhus books AND jigs are really a great work by Don. I bought both several years ago and can say they are like the "bible on the subject. I am glad I found your channel thought, as you do a great job of demonstrating the work!
@@ffmedic1638 Thanks for leaving a comment. There was talk about a year ago that someone would try to get permission to print the books again. Sadly, I do not think that this came to anything. As you say they are great books and tools!
I enjoyed your video even though its not much different than the ones produced by Don B. himself. I was wondering if you could possibly cover one of the knots from the book that has a couple turns round the board first. I own this jig from Don B and his 2 books for the full kit.. not sure how you managed to get the paracord through that wee hole... I've not been able to since the tool I believe was designed for smaller cord. Would love to see more from you on this tool, I personally mainly use it for the more weird and not traditional designs, however, it does make the work nice and neat from the start.
Thanks for watching and taking the time to leave a comment. I think that my board may be a later design, as paracord seems to fit very well into the hole. Yes, I can see that going twice around the board does cause a bit of confusion. I am not sure whether or not I will be making a video on this, as I don't think the kit is available anymore. I have tried to contact Done on a regular basis, but I never get a response. I too only really use the tool for more intricate Turks Heads. Would love to see some of your work if possible?
Johnny Debt you could look at my less active page on FB? I'll snag a link later for you.
Sure, or link up with me here: facebook.com/john.peart.798
@19:59 You're placing the working end to the left of the standing part, like what's done for a Gaucho interweave.
great instructional video I'll give it a shot👍
Hey Dan, glad you like it. Many thanks for popping over and leaving a comment. Would love to see the result when you have done it?
Hi Johnny, I've made myself a jig for the turks head knots, but can you give me some idea as to where I can obtain the paper patterns???
Peter
Gosh, no idea?? Are you by any chance on Facebook, as I could link you up with some groups that may have the answer to this?
How do you work out the length of paracord to use
There is a rough formula in this blog post on the Turks Head: igkt-solent.co.uk/turks-head-bights-leads-passes/
I did this braiding right on the staff never heard the board technique before curious question how do you control diameter is it just the size of the board and when you're doing multiple passes is it always going to be easier to tighten on the object had a hard time pushing my threading needle through glass pass
I always tie a Turks Head loosely, then place it on the object, I then do the additional passes and only then start to tighten up.
@@KnottingKnots how can I send you pictures of what I do
@@KnottingKnots because curious on big Turk's head especially the long ones how you exactly transfer them
@@robertleonard707 Please let me know if you do post to this link. You can drag and drop a photo here, please: bit.ly/yourknotwork
Great video.
Personally, I would say the best!!! 😀 Thanks for taking the time to view and also make a comment, very much appreciated.
Hi Johnny, I find the turks head knots fascinating. Is there anywhere in the UK I can purchase a turks head board?
Robbie
In the good old days it was so easy to get hold of, these days it seems to be extremely difficult. If you are really interested in some of the previous comment, there are dimensions for making one.
When i started out, it was a pain in my ass, and took awhile to get how to do em in my hand. After several yrs, i can do em blindfolded. Now I've seen alotta jigs and mandrels, and these look more of a pain than by hand.
are there any commercially available boards like yours?
Sadly no, you will have to make your own................... Mmmm, just had a thought, will report back.
Do you you have a pattern for a 3l 4 b Turks head by chance?
If I recall correctly at the bottom of this post is the pattern you may be looking for: igkt-solent.co.uk/fender-making-rope-side-fender/ The video should also show it being made on the hand.
The number of leads is determined by how many times you go around, right?
I think that this video will help you to work out the leads: ruclips.net/video/1CQ5Mf0jeys/видео.html there is also a chart here that shows what is possible in Leads and Bights combinations: igkt-solent.co.uk/turks-head-chart/
Where do you find the paper example you show? I can’t find the link to it.
There is a link on this page for the advanced and simple gridmaker: igkt-solent.co.uk/turks-head-chart/ hope this helps.
@@KnottingKnots thank you
This makes it very easy
Do you already have a jig?
I want to make one of these knots for a 65mm diameter pipe how much cord would I need?
Can this job make a smaller Turks head? BTW, fantastic video
Hi Johnny, I am extremely new to this and I am enjoying your videos, very clear and informative, I want to make fancy key fobs using crown senet and turks head knots , and seel them for a local charity, instead of paracord what type of rope could you use and where do you get it from , I would like to keep the cost as low as possible, more money for charity :)
many thanks
Hello Sammy, thanks for popping over and leaving a comment. Sorry not to answer your question straight away, but I need to know what country you are in to answer in full?
I thought your reply was pretty quick my friend lol I live in Northern Ireland 😀
OK, that makes things a bit easier. As a decorative knotter I always want the best cordage, and in the good old days "Belfast Cord" was the best, but does not exist anymore. So the best quality stuff can be obtained from Mikko Snellman, here is a link to that video, which also has contact details: ruclips.net/video/DVBogjW6kxo/видео.html Another supplier may be www.cordsandropes.com/ they are recommended in a group that I am in. One thing you will find is that cord can be rather expensive, this is why people usually stick to Paracord.
Cheers for that, sounds like paracord makes more sense . Sorry for the questions, where is best suppliers do paracord ?
I usually use 3mm paracord, which is a little more delicate than the 550 stuff and I get it here on Amazon: amzn.to/2sLQSm1 or here on eBay: rover.ebay.com/rover/1/710-53481-19255-0/1?ff3=4&toolid=11800&pub=5575285280&campid=5338064521&mpre=http%3A%2F%2Fwww.ebay.co.uk%2Fitm%2FArmy-Military-100m-Paracord-Reel-3mm-Basha-Tent-Bivi-Camping-Guy-Rope-Para-Cord-%2F381150398024%3Fvar%3D%26epid%3D1258047597%26hash%3Ditem58be558648%3Am%3Amio-_0PVwCLWSXWbgUUVYfg
Thanks so much for doing this video. I could NOT figure out how ppl knew to go over and under which strands. Lol. Watching the video makes so much sense. This is just a weaving pattern. Duh! 😂 Now...where do I get the board. Because I do “knot” want to use my hands again. 🤪
There is more information on a knot board here: igkt-solent.co.uk/turks-head-chart/ Thanks for taking the time to view and also make a comment, very much appreciated.
Ingenious, JohnC
Many thanks, do you think you might get one made?
Where did you get that print out?
Part way down on this post, you will see the heading, Simple and Advanced Turks Head Knot Grid. There is a link on that to both of them: igkt-solent.co.uk/turks-head-chart/ I think there is also a video on that site on how to use them??
Where can I find these types of patterns I have tried Google with no luck
In this blog post you will find a link to the Simple Grid Knot, that is where you can input the number of Bights and Leads that you want to make: igkt-solent.co.uk/turks-head-chart/
Lovely! Thanks a lot😄 can you show how to do a longer th? Like I want maybe a 6 bite th 8 inches long on a cane or staff.
Aha, I see there is the question. Sorry, the message reminders were sent to me in the wrong order. I now know what the question is! Thanks for popping over and leaving a comment. Would love to see some of your work, anywhere I can see it?
What is th name of the needle? I've been using a large embroidery needle and it is cumbersome.
If you mean the needle that is attached to the Paracord, then it is a Lacing Needle similar to this: amzn.to/2HETzh9
Very nice tut.
Glad that you liked it, thanks for taking the time to leave a comment. I assume that you are a decorative knotter?
Johnny Debt learning.
Let me know when you have some work to show, love seeing other peoples work.
Johnny Debt will do
How do you make the Turk’s head longer, so it it extends along the pole or rail?
I personally use a long 2 bight Turks head: igkt-solent.co.uk/bight-multi-lead-turks-head-covering-knot-tutorial/ or the long 4 bight Turks head, which is slightly harder: igkt-solent.co.uk/turks-head-4-bight-long/
What is the dimensions of Turks head jig
There is a photo and a dimensions on this blog post: igkt-solent.co.uk/turks-head-chart/ Thanks for taking the time to view and also make a comment, very much appreciated.
great video
Thanks for taking the time to view and comment, glad you liked it. Not sure if I have asked this, are you a decorative knotter?
Where did you get your fid from ?
That one was made by PJ, you can find more information on tool makers here: igkt-solent.co.uk/knotting-tools-video/
After you get done making the turks head and slip it onto a pipe where do you start to tighten it up?
I usually start where the top lead enters the Turk's head, just gently pull it up tight, but not too much to actually pull the cord through, as you go round pull out any slack, but do not over pull. Keep going round and eventually you will get to the next row, keep going round and pulling up. You will then end up on your final row, do the same again. Then back to the beginning and start the process again. Eventually you will end up with a really tight Turks Head on you object. Finally, cut the two ends (or more if using more passes in different colours). Cut them flush and then gently push the ends under the weave, so as to hide them. Thanks for taking the time to view and also make a comment, very much appreciated.
Do you sell those boards?
Sadly no, but there are some measurements of the tool here: igkt-solent.co.uk/turks-head-chart/
Where did you get your fid/ marlin spike
If you tell me which country you are in, I may be able to put you in touch with someone that makes them?
Johnny Debt, I live in the USA.
I got mine from a guy in the States. A search on Instagram #marlinspike will bring up a lot of results of people in the States who make them. Or you can link up with me on FB and I will pass over a link to the guy that made mine? facebook.com/john.peart.798