Nice score Tinman, looking forward to some stihl content. Hopefully the cylinder on the 261 is in good shape because nobody makes an aftermarket cylinder for the newer models with the slanted fin design and stihl prices are silly.
Just a heads up, you can get a HyWay cylinder and piston for the 441, if you wanted you can get a big bore. Big bore would make it the same displacement as a 460 or a 461.
To refer to you as a powersaw addict would most definitely be a complete understatement! That being said, your addiction provide all of us viewers with many hours of entertaining and informative watching!
Great video as usual sir, Hope you and the family are having a good week. Good bunch of saws, I’m kinda fond of the MS441c it was the first big saw I ever bought.
Hi Tinnman!!😀😀 I bet the only thing that is wrong with the 261 is that the clutch bearing is bad and they might have thought the crank bearing went out. Will be interesting to see. Pretty good buys buddy!!👍👍 Take care my friend!!😀💚 Logger Al
Boss has 2 550xp we use for tree service. They have low compression pulling on the cord but they run with lots of power. Maybe by design I am not sure. That 261 has lots of compression compared to the 550
Cant wait to see how you make out with them. Back in the eighties my Grandfather bought a Stihl 028. Every time I went to visit him, he would make me get the saw out and show him how to start it. He never once used it. I was the only one who ever used it to cut wood up at his cottage, and I really liked that saw. When he passed away my uncle got it. So recently a buddy of mine who collects junk, asked me if I was interested in anything he had in his trailer. So I had a look, and to my surprise there was the powerhead from a 028 super in there, so I grabbed it. It was missing the clutch cover, and the filter cover and I found the gas line to the carb had a crack in it. I pulled the muffler to check the piston, and there wasn't a mark on it. So over the last month I scrounged some parts here and there, and today it's all back together, and it's a real zinger. Going to try it on some wood tomorrow.
Sometimes the right end of the crankshaft wears okt on the 261s. Were the clutchdrum bearing sits. I hope that is not the reason for the loose clutch drum.
Nice haul, I have a pair of 261c saws sitting on the shelf. Step-dad in his later years had lapses in memory and didn't mix fuel. One was maybe 2 years old and the second saw only saw one tank of fuel. Wasn't able to get parts then so hopefully they are available now. 😊
I picked up a free 441 about a year ago as a barn find that wasnt running. Turns out that the sparkplug spring had come out of the coil wire, pushed it back in and she runs great now.
good score on saws. Always nice finding good deals like that. I spent all weekend working on a couple of my 2100s and 394 and ended up resurrecting an old 185 back to life. Had enough parts sitting around to make it complete and got lucky the piston/ cylinder were both mint. Got abunch of parts coming from wolf creek for a couple rebuilds too.
I bought a Ms241c at auction, had the same wobbly clutch drum, the bearing was ok, it turned out the end of the crank was worn down, so needs a new crank, very expensive, so I'm waiting for a second hand one to turn up., I look forward to seeing the rebuilds.
Thats good timing, bought a smoked 261c a week ago cleaned the cylinder up no probs and ordered a pop up hyway piston so see how it goes, never thought you would have one on the channel.Look forward to seeing what you fo with yours.
I love my 261. So light and cuts screaming fast, especially for bucking limbs. Muffler mod, West coast saw air filter, lower transfers gasket matched, minor machine and porting. Debating on going back in to tweak some numbers. I am very interested to see what the Tinman does with that 261.
Hi tinman , nice bunch of saws the 261 go through clutch drum bearings as they are small and i think as they are a powerful saw , also maintainence and people over tightening the chain as usual 😂 , can't wait to see tinman touch on these ones , Cheers Luke from Australia
I recently bought a 394 at auction that someone modified a eliminator cover off a 288 to fit it for a little 60 dollars American. The saw runs like a champ. You gotta find you a 066 red eye! You wont be disappointed
550xp is a lovely saw, you'll like using that. Mine is mk1 cuts like a demon and light, anti vibration is the best there is. Have fun with your project what a bargain. Here in uk that would be over $150 crazy. 👍🏴
I'm excited to see what you do with the 261. I bought a brand new 261 for around $700 at the beginning of the covid shut down. I specifically asked for one without the autotune. But the way your's turns out should still give me ideas on how to port mine. The 261 is supposed to be a good candidate for porting to get nice gains in horsepower. Happy belated Canada day Tinman!
Best purchase out of this lot is definitely the 261c. Just an all around great saw that can take a beating. A tad heavy for a 50cc, but they hit higher than their displacement. Very reliable. The 550xp mk1 is hit or miss. You could be chasing gremlins for months or it could run perfectly. Horrible bearing/seal design with a stepped crank that sucks. Major heat issues and an inferior version of A-tune. Plus those inept dawgs with no choices for any upgrades (explains the bent muffler). The 441 is smooth, but no thanks. Its so strange that Stihl went from the 441/461 pinnacle of over-engineering silliness to the simplicity of the 462 in such a short time.
Yeah, you stole that 550! The 441 and 261 don't seem like a bad deal to me. I'm in the same boat as far as Stihl goes. I like Stihl, but in my town there's one small mom&pop Stihl dealer that specializes in about everything but saws lol. Only stocks the most common parts, fuel lines, filters and starter rope/handles. Next closest town with Stihl dealers is 120 miles away, but has 5+ of them. Looking forward to the upcoming inspection videos👍🏻
What are these auctions I keep hearing about? I live in flat farmland too, so not a lot of saws where I live either. I just ordered an echo 355t yesterday and I can't wait to get my hands on it!
261 if it has a white solenoid on the carb it's the newest version of the solenoid . I've got one bought it for 200 cdn , 2021 production year lady was selling here husband's stuff also bought a 2023 ms201c Mtronic for 200cdn
I’m excited to see what that 261 turns into that’s my next buy I have a 400c and a 500i that I run every weekend and that 261 would complete my arsenal lol can’t wait to see
I live in Windsor Ontario just across from Detroit if you need any part you can't find here in Canada I go across offen I am sure the usa dealers have the parts
441, work some porting magic on it, could become a nice useful saw. Pay big $$$ for oem parts, its downfall. It shall be interesting to see what you will make of her.
auctions are pretty much the only place I'll buy chainsaws or anything with a small engine, live or online they always go under value I've seen an ms880 sell for i think 5 or $600 and a running 036 for $105.
I've found them on my local ebay (trade me in NZ) and occasionally Facebook marketplace. I've found the key is to use really general terms. Like just search for "chainsaw" rather than a "husqvarna chainsaw". Some people don't know what they've got and have a cheap hidden gem. Takes a while to scroll but worth it!
That 261 is nice. A lightweight saw juiced up would be perfect to take up a tree when the wood starts getting bigger than my climbing saw will handle. Enjoying these auction buy videos. They got me waiting on the build videos of these saws
1st off I'm absolutely down with your channel and content, I've a 95 obs Ford dump bed and hot rod saws a bit. Having said that, If you need parts our saw shop in town generally has everything Stihl that 441c and 261 need if you run into a wall contact me and we'll get you hooked up I don't run but 4 different huskys they're on the heavier side for my liking. That 441 looked to have cooked the crank bearings and that will cause that saw to do nasty things and never be right as far as air fuel and that 261 looks the same way only it ran a bunch longer. . . Dull saws digging in the R's burn up sooo many good saws. Awesome digs man I hope they work out for you.
261 is an AMAZING 50cc saw. 10lbs and 4hp... Its a screaming little saw... BEST of the BEST 50cc. Mine is a staple. 462 is bonkers too..
261 might be a good saw but a husqvarna 550 is somthing else
Every time you share that you got a bunch of saws, it makes me feel better about my addiction😂😂😂
Nice haul. I want to see the comparison between the 550 and the 261. An Echo 4910 would be worth keeping an eye out for as well.
Nice bunch of saws!
441 is wicked ported and polished! Nice find
Nice score Tinman, looking forward to some stihl content. Hopefully the cylinder on the 261 is in good shape because nobody makes an aftermarket cylinder for the newer models with the slanted fin design and stihl prices are silly.
Hyghway does pop-up piston/cylinder kit for the 261
@@cyrillepinton3398 yea that's for the older 261 but it doesn't fit under the top cover of the newer saws. Tinman has the newer version.
Just a heads up, you can get a HyWay cylinder and piston for the 441, if you wanted you can get a big bore.
Big bore would make it the same displacement as a 460 or a 461.
New subscriber here. Thanks EweTube for popping this up for me. Being elderly and knowing nothing since 1970's Homelite saws this is fascinating.
To refer to you as a powersaw addict would most definitely be a complete understatement! That being said, your addiction provide all of us viewers with many hours of entertaining and informative watching!
We call it CAD (Chainsaw Addition Disorder). Lol.
Great video as usual sir,
Hope you and the family are having a good week.
Good bunch of saws, I’m kinda fond of the MS441c it was the first big saw I ever bought.
There is no oppps when buying more saws there's just joy and happiness
Hi Tinnman!!😀😀
I bet the only thing that is wrong with the 261 is that the clutch bearing is bad and they might have thought the crank bearing went out. Will be interesting to see.
Pretty good buys buddy!!👍👍
Take care my friend!!😀💚
Logger Al
I didn't think of that when I replied, he did wobble that fool a bunch when he messed with it
Looks like another decent auction day. Will be interesting to see the final results.
When I get enough money back in my account, I’ll probably buy a few more saws😁. Much love to you Tin🤙🇺🇸
Happy Canada Day, nice saws.
50cc shootout!! That would be pretty cool bud!! The 441 build will be interesting to see how it turns out. Happy Canada Day!!
Nice scoops, will be interesting to see the outcome... definitely will stay tuned for these builds. TC Mahalo Tinman 🤙🤙🤙
Thanks for featuring some smaller cc saws! 550xp mark 2 is what I am hoping to get soon.
Boss has 2 550xp we use for tree service. They have low compression pulling on the cord but they run with lots of power. Maybe by design I am not sure. That 261 has lots of compression compared to the 550
Im looking forward to the 261 rebuild. I have one right now I have to rebuild and I want to see how good the bottom end is compared to that one.
Cant wait to see how you make out with them. Back in the eighties my Grandfather bought a Stihl 028. Every time I went to visit him, he would make me get the saw out and show him how to start it. He never once used it. I was the only one who ever used it to cut wood up at his cottage, and I really liked that saw. When he passed away my uncle got it. So recently a buddy of mine who collects junk, asked me if I was interested in anything he had in his trailer. So I had a look, and to my surprise there was the powerhead from a 028 super in there, so I grabbed it. It was missing the clutch cover, and the filter cover and I found the gas line to the carb had a crack in it. I pulled the muffler to check the piston, and there wasn't a mark on it. So over the last month I scrounged some parts here and there, and today it's all back together, and it's a real zinger. Going to try it on some wood tomorrow.
🤩 wow! That 261 is going to clean up nice!
Sometimes the right end of the crankshaft wears okt on the 261s. Were the clutchdrum bearing sits. I hope that is not the reason for the loose clutch drum.
Nice haul, I have a pair of 261c saws sitting on the shelf. Step-dad in his later years had lapses in memory and didn't mix fuel. One was maybe 2 years old and the second saw only saw one tank of fuel. Wasn't able to get parts then so hopefully they are available now. 😊
Highway parts does them.
Nice Tinman! Yesterday I found a Dolmar 133 super on Marketplace here in the Netherlands, great deal. Super pumped!
I picked up a free 441 about a year ago as a barn find that wasnt running. Turns out that the sparkplug spring had come out of the coil wire, pushed it back in and she runs great now.
Interested to see how porting a m-tonic will turn out great deal on three saws happy Canada day 🎉 looking forward to it he builds
good score on saws. Always nice finding good deals like that.
I spent all weekend working on a couple of my 2100s and 394 and ended up resurrecting an old 185 back to life. Had enough parts sitting around to make it complete and got lucky the piston/ cylinder were both mint. Got abunch of parts coming from wolf creek for a couple rebuilds too.
I just rebuilt and sold a non mtronic ms441. Had no issues getting bearings and seals from my dealer in BC
The 261s have a problem with wear on the crankshaft on the clutch side. Can be quite difficult to fix
The 261C is one of best Stihl MTronics ever made. They cut like mad. Interested to see what you do with her.
I bought a Ms241c at auction, had the same wobbly clutch drum, the bearing was ok, it turned out the end of the crank was worn down, so needs a new crank, very expensive, so I'm waiting for a second hand one to turn up., I look forward to seeing the rebuilds.
Thats good timing, bought a smoked 261c a week ago cleaned the cylinder up no probs and ordered a pop up hyway piston so see how it goes, never thought you would have one on the channel.Look forward to seeing what you fo with yours.
Both 261 an 550xp can be built up purty nasty they can make 6hp ported looks like some good scores
I love my 261. So light and cuts screaming fast, especially for bucking limbs. Muffler mod, West coast saw air filter, lower transfers gasket matched, minor machine and porting. Debating on going back in to tweak some numbers. I am very interested to see what the Tinman does with that 261.
Happy Canada Day! I wanna get into auction saws, not much out here unfortunately. Nice snags
Looks like a nice haul to me, another challenge for the Tinman 👍.
And I thought I had a problem seeing you makes me feel better about my now 8 saws
The 261 is a no brainer to make run. A friend of mine is a Carver and has several that get run alot easy to rebuild. I have put top end on 2 of his.
Hi tinman , nice bunch of saws the 261 go through clutch drum bearings as they are small and i think as they are a powerful saw , also maintainence and people over tightening the chain as usual 😂 , can't wait to see tinman touch on these ones , Cheers Luke from Australia
I have MS261c. An awsome saw! I prefer MS362 over MS441. But MS500i is the boss!
I recently bought a 394 at auction that someone modified a eliminator cover off a 288 to fit it for a little 60 dollars American. The saw runs like a champ. You gotta find you a 066 red eye! You wont be disappointed
West coast climbers run 550xp hot saws running 24-28 inch bars. I think you would like building one Tinman
Good pickup. I won A used 550xp on a RUclips auction. It’s a good saw. The 261c is also a good saw.
They make off shore big bore kits for the 441.
Happy Canada Day. How's the Tinman and family doing?
550xp is a lovely saw, you'll like using that. Mine is mk1 cuts like a demon and light, anti vibration is the best there is. Have fun with your project what a bargain. Here in uk that would be over $150 crazy. 👍🏴
i own a 261cm so looking forward to the future videos
I have a 261 and it’s a good one and having winter and summer mode is a great feature 😁 and a great power ratio 😁🥳
I'm excited to see what you do with the 261. I bought a brand new 261 for around $700 at the beginning of the covid shut down. I specifically asked for one without the autotune. But the way your's turns out should still give me ideas on how to port mine. The 261 is supposed to be a good candidate for porting to get nice gains in horsepower. Happy belated Canada day Tinman!
Best purchase out of this lot is definitely the 261c. Just an all around great saw that can take a beating. A tad heavy for a 50cc, but they hit higher than their displacement. Very reliable.
The 550xp mk1 is hit or miss. You could be chasing gremlins for months or it could run perfectly. Horrible bearing/seal design with a stepped crank that sucks. Major heat issues and an inferior version of A-tune. Plus those inept dawgs with no choices for any upgrades (explains the bent muffler).
The 441 is smooth, but no thanks. Its so strange that Stihl went from the 441/461 pinnacle of over-engineering silliness to the simplicity of the 462 in such a short time.
Yeah, you stole that 550! The 441 and 261 don't seem like a bad deal to me.
I'm in the same boat as far as Stihl goes. I like Stihl, but in my town there's one small mom&pop Stihl dealer that specializes in about everything but saws lol. Only stocks the most common parts, fuel lines, filters and starter rope/handles. Next closest town with Stihl dealers is 120 miles away, but has 5+ of them.
Looking forward to the upcoming inspection videos👍🏻
This is going to be a cool series.
The 261 I would start with the fuel tank, if has carb issues. Best to replace fuel solenoid and carb kit it.
What are these auctions I keep hearing about? I live in flat farmland too, so not a lot of saws where I live either. I just ordered an echo 355t yesterday and I can't wait to get my hands on it!
Sounds like a call to Wolf Creek is in order!😊
The standard carb stihls seem to respond to porting better then mtronic
The 261 has a fuel solenoid that goes bad around 100 hours. Thats my guess for whats wrong with it.
261 if it has a white solenoid on the carb it's the newest version of the solenoid . I've got one bought it for 200 cdn , 2021 production year lady was selling here husband's stuff also bought a 2023 ms201c Mtronic for 200cdn
HAPPY CANADA DAY TINMAN 😁👍👍🇨🇦🇨🇦🇨🇦
Happy Canada Day Stevie
Mesin2 super semua bos 😮😮 super mahal
Great work tinman
Happy Canada day ya'll😅. I get ebay stihls all running but I ask Jesus which saw and how much
I’m excited to see what that 261 turns into that’s my next buy I have a 400c and a 500i that I run every weekend and that 261 would complete my arsenal lol can’t wait to see
That 550xp will scream when you get her all set up Tinman.....I've got the 545 pro model and it kicks butt for the size!
Nice lot of saws man.
261 is probably the best 50 cc saw stihl ever made!
Happy Canada Day!
🇨🇦💪🇺🇸
I would love to buy that 261. If you decide you want to make quick cash let me know
I've always heard them 441s are junk and blow up. Never understood what the actual problems are.
I live in Windsor Ontario just across from Detroit if you need any part you can't find here in Canada I go across offen I am sure the usa dealers have the parts
261 Stihl crank will more than likely be the issue with that wobbly clutch drum
Love it
441, work some porting magic on it, could become a nice useful saw.
Pay big $$$ for oem parts, its downfall. It shall be interesting to see what you will make of her.
The way I see it in Aussie land that’s $2500 sitting on the tail gate!! 441’s second hand are going here for 1K
Tinman they sell complete bottom end kits cases, crank, bearings and seals for around $200
Sweet!
Hi Tinman, I would love to buy a saw you built. How can I do that. Long time subscriber. Thanks
nothing wrong with more saws!
Tinman I've bought several saws from Canada auctions online, my 390 , 357xpg, my 2171 walkerized jonsered
Do you buy from local auctions or online?
yeah saw prices have nearly doubled. . it's a shame
I love chainsaws and dirt car racing. Ricky Weiss is from Headingly . Is that close to you? He runs a super late model.
auctions are pretty much the only place I'll buy chainsaws or anything with a small engine, live or online they always go under value I've seen an ms880 sell for i think 5 or $600 and a running 036 for $105.
Early 2007 into 2008 was the first year that the MS 441 was introduced to the United States
I love the 261 most used saw in arsenal
I'm 15 years old building saws is My passion, I really want to do a 441.Would you ever trade That thing I have about a hundred saws
My neighbor has Stihl 261 , he runs a 24” bar on his ,my old 034 cuts as hard as his but I run an 18” bar
cheers tinman
👍
Leave some for the rest of us!
where do you guys find these typa saws? ebay maybe?
I've found them on my local ebay (trade me in NZ) and occasionally Facebook marketplace. I've found the key is to use really general terms. Like just search for "chainsaw" rather than a "husqvarna chainsaw". Some people don't know what they've got and have a cheap hidden gem. Takes a while to scroll but worth it!
Tinman 562 go for $600 to $700 out the door with a 5 year warranty!!!
City of Winnipeg forestry department...
Government wastes. No incentive to do better
@@clintbliss2046pigs cant help themselves
For the 550 , 562
TINMAN CHECKOUT BAILEYS CHAINSAW PARTS THEY CARRY LOTS OF CHAINSAW CYLINDERS AND PISTONS 👍
That 261 is nice. A lightweight saw juiced up would be perfect to take up a tree when the wood starts getting bigger than my climbing saw will handle. Enjoying these auction buy videos. They got me waiting on the build videos of these saws
The 441 is the red headed stepchild of the Stihl world. Every diehard 044 and 440 fan despises them 😂
1st off I'm absolutely down with your channel and content, I've a 95 obs Ford dump bed and hot rod saws a bit. Having said that, If you need parts our saw shop in town generally has everything Stihl that 441c and 261 need if you run into a wall contact me and we'll get you hooked up I don't run but 4 different huskys they're on the heavier side for my liking. That 441 looked to have cooked the crank bearings and that will cause that saw to do nasty things and never be right as far as air fuel and that 261 looks the same way only it ran a bunch longer. . . Dull saws digging in the R's burn up sooo many good saws.
Awesome digs man I hope they work out for you.