We sell the SVG files, you’ll have to program yourself. Our new files come with vectric carve files but I don’t think that will work with carbide create
their CNC is under $8K, all in. but you could do similar with about a $5K CNC.. there may be a $2K CNC that can also do the same. the difference would be in the size of the machine, and they have a $$$ spindle (pwn is good stuff), but you could do the same sticking a palm router in there ($200) which a lot of people do. you don't need the big spindles unless you're going to be doing huge pieces in hard wood and running it all day long. beginner system isn't that $$ at all. good luck! :-D their machine is a onefinity. great product. they have smaller cheaper machines as well, if you don't plan to stick a door into your work area. :-D
@@CoffeyCustomBuilds I think you have to size the models up for the larger machines, and work in harder materials like bronze and stone. but.. you'll be making cooler spoons, so it all works out. ;-)
I think you need to be very cautious with those lamps. If someone was to use a high-wattage bulb (75w or higher), there is a very good risk of burning the inside and possibly causing a fire.
The strainer is a GREAT idea.
Good info, no wasted time. I like the style, will have to check out your other vids.
Thanks I appreciate it
Love the straight shooting no nonsense drop great product to cheers 🥂
Thanks appreciate it
Those toast tongs are cool! Great ideas!
Thanks Bruce 🙌🏼
Congratulations! Our goals for 2024 is to learn our machine better and get a Side hustle going to earn extra money. Many Blessings!
You guys are the best!
No you’re the best!!
Solid work. I need to stock up on inventory for the fall craft fair season. Thanks!
Yeeesss get going! Lol coming quick
Always great !!!
Yeaaa osmo! Not many people I've seen using that stuff. It's great!
Works great, no mixing, and you can add a few coats 🤌🏼
I bet there's a market for a cnc'd butter machete! Great. video guys!
Ohhh interesting 🤔 never heard of a butter machete lol
Love your thumbnail! 😂
hahah thanks!
Очень круто, молодцы
I love that dust shoe ! where did you get it from?
Hello, thanks for the video, it was very useful. I wonder what kind of wood you use.
Mostly walnut, cherry, and mahogany
How do you determine using an up vs a down cut?
What type of tape glue using to fix the woods to the cnc? I work with melamine, Can I use tape glue also? great video! thank you.
The tape should stick just fine. I use masking tape and CA glue in between the two pieces
Hello. Please what is the extension of the files? Thank you
do you have a link to the tape you glued stick to stick so I can buy it
nice! or whatever.
Thanks and stuff!
What ramp length do you set for the 3/4" straight bit in Vectric?
Ummmm 😬 I’m pretty sure 1 inch 🤔
How can I get these files for "C2D" (Carbide Create)?? 🤔 🤷♂️
We sell the SVG files, you’ll have to program yourself. Our new files come with vectric carve files but I don’t think that will work with carbide create
I wonder how you make a ramping cut ( if that is what you call it) like you did at 7:57 in the vid. Can you do this with Carvco?
I don’t use carve co but I’m sure you can. In vectric and easel you can.
Nice work! What size of magnets are you using for the magnetic boxes?
They’re linked in the description but I believe they were .21” and thanks!
Where do you buy your bits
They’re not mine, I get them on amazon lol I have them all linked in the description
I could make all of those if I had a $30,000 CNC
Just push play! I do most of this blindfolded 😆
their CNC is under $8K, all in. but you could do similar with about a $5K CNC.. there may be a $2K CNC that can also do the same. the difference would be in the size of the machine, and they have a $$$ spindle (pwn is good stuff), but you could do the same sticking a palm router in there ($200) which a lot of people do. you don't need the big spindles unless you're going to be doing huge pieces in hard wood and running it all day long. beginner system isn't that $$ at all. good luck! :-D
their machine is a onefinity. great product. they have smaller cheaper machines as well, if you don't plan to stick a door into your work area. :-D
@@CrudelyMade but I could make it with a $30,000 one right? Cause I have a $70,000 one. Just confirming more expensive machines can make it.
@@TwoMooseDesign that's how I do my RUclips comments 🤣
@@CoffeyCustomBuilds I think you have to size the models up for the larger machines, and work in harder materials like bronze and stone. but.. you'll be making cooler spoons, so it all works out. ;-)
I think you need to be very cautious with those lamps. If someone was to use a high-wattage bulb (75w or higher), there is a very good risk of burning the inside and possibly causing a fire.
I used LED bulbs, they hardly get warm at all
Ahí cosas q una máquina no puede hacer y se nota en la calidad d las cucharas le falta el toque d un Carpintero
Use normal vacuum machine
THAT'S NOT WHAT YOU PAY FOR THE TEAM IN A HUNDRED YEARS
?
Hi can I get project files. If you share your number I can contact you.