VW Touran ABS light on... Fault finding and repair.

Поделиться
HTML-код
  • Опубликовано: 13 дек 2024

Комментарии • 27

  • @jackiemay9471
    @jackiemay9471 9 месяцев назад +2

    good morning Luis a nice relatively easy one i have a vw tiguan heater beating me for the moment low heat aux pump locked up code new pump no change must be heater core blocked heater pipe delaminating egr flow cant find a control valve like some audis engine gets to 90 c normal i will get it wont beat me but i fired the parts cannon but now find the fault thanks for the video and have a nice one

    • @LMAutoRepairs
      @LMAutoRepairs  9 месяцев назад +1

      ☺️
      Don't give up...
      👍👍👍

  • @ZoltanHercules
    @ZoltanHercules 6 месяцев назад +1

    Is the video for the parking assist up?
    I have the same car with the same issue.
    I also just had the abs issue come up

  • @petecurran3995
    @petecurran3995 9 месяцев назад +1

    Nice fix! 👌🏻
    Had same problem on my Touran and weirdly, evey time engine switched on, it went into DPF regen mode 🤷🏼‍♂️

  • @wires4auto
    @wires4auto 9 месяцев назад +1

    What are the odds the crap on the ring damaged the sensor ? So with new sensor but still having the leaking bearing it will fail again?

    • @LMAutoRepairs
      @LMAutoRepairs  9 месяцев назад

      Could have been that... which in that case yes, it will might fail again...
      👍👍👍

  • @nickluckleek2445
    @nickluckleek2445 9 месяцев назад +1

    Hello are you LM autos in Rotherham please

  • @wackey3455
    @wackey3455 9 месяцев назад +1

    Good job luis fair play to you

  • @florinsiladi9118
    @florinsiladi9118 9 месяцев назад +2

    You can drop the video with parking sensors..We still have some coffe 😂🫡
    Thanks, have a nice day

    • @LMAutoRepairs
      @LMAutoRepairs  9 месяцев назад

      🤣
      Keep it warm...
      👍👍👍

  • @marvinaustin3772
    @marvinaustin3772 9 месяцев назад

    Question?? I have a 2006 volvo s40 2.4j that has a body control module issue... nothing works in the car....can I solder the chips to a different board ...would that work ?????

    • @LMAutoRepairs
      @LMAutoRepairs  9 месяцев назад

      If the issue is not the software/firmware on the chips, yes, would work.
      It it is a software issue, like the software corrupted, you would just be moving the problem...
      👍👍👍

    • @marvinaustin3772
      @marvinaustin3772 8 месяцев назад +1

      @@LMAutoRepairs i don't think it's software or firmware ...I heard a popping sound then a electric burn smell... Opened it up a small square component was burnt on the board

    • @LMAutoRepairs
      @LMAutoRepairs  8 месяцев назад

      In that case it might worth a try...

  • @chrisg1900
    @chrisg1900 9 месяцев назад +1

    Sorry to ask for advice but does this look normal to you it’s antara 2012.2 cdti 4x4 lnq engine fuel balance over 4 injectors 2 @ -70 2 at 70 I have clear exhaust at idle and smoke when accelerating at standstill

    • @LMAutoRepairs
      @LMAutoRepairs  9 месяцев назад

      Sorry, but I am sure I understand the question...
      What do you mean by 30.6?

    • @chrisg1900
      @chrisg1900 9 месяцев назад

      Sorry the 30:6 was an image I tried to upload a screen shot from autel showing the injection balance

  • @zodiatti1825
    @zodiatti1825 9 месяцев назад

    I like you videos too because can be learned many things. Similarly good like Ivan from Pine hollow diagnostics or Diagnose Dan. But you go often onto hard core what others do not do. Keep up good habits:)

  • @anapaulapereira3255
    @anapaulapereira3255 9 месяцев назад +2

    TOP

  • @Vader74
    @Vader74 9 месяцев назад +1

    almost 99.9% is not sensor but ring

    • @LMAutoRepairs
      @LMAutoRepairs  9 месяцев назад +1

      Have you watched the video?
      😋
      👍👍👍

    • @Vader74
      @Vader74 9 месяцев назад +1

      @@LMAutoRepairs ofc just commenting on other cars to

    • @LMAutoRepairs
      @LMAutoRepairs  9 месяцев назад

      @Vader74
      😋
      👍👍👍