Hello, I'm Andy from Argentina. Very good video! One question: what are the pins that are permanently connected to + and - so that the cluster remains permanently on?
@@gio0042Hola, mi cluster se apaga solo a los 10 segundos de encenderlo... que pines hay que conectar a + y - para que permanezca encendido ? Muchas gracias desde Argentina!
@@andresoddi952 Hola, el cluster debería permanecer encendido sin más conexiones... Verifique que la fuente de alimentación sea lo suficientemente potente, intenté conectarlo a una fuente de alimentación de 12v 500mA pero solo funcionó con la línea de 12v de la retroiluminación desconectada, con la retroiluminación conectada El clúster seguía reiniciando y no podía permanecer encendido. Para usarlo sin problemas lo conecté a la fuente de alimentación de una computadora. Seguramente las bombillas requieren una potencia bastante alta para funcionar al mismo tiempo... Prueba con una fuente de alimentación más potente y avísame si funciona. Perdón si la traducción es incorrecta pero estoy usando google. Saludos desde Italia
hi, could you provide me with a connection diagram of the various pins? I would like to build a driving simulator with an instrument panel of a focus mk1 and I would need to know the connection diagram of each indicator and each warning light. Thank you
Selam benim 2004 benzinli manüel vitesli aracımın ekranı geç devreye giriyor bunu neden yapar? Benzinli bitince uyarı ışığı yanmıyor şamandıra ve benzin pompası değişti bunun için
Hey, I need the pinout of this meter because I want to use it together with arduino in racing games, I'm counting on your help. I care most about the speedometer, tachometer, liquid and fuel gauge and the display showing the mileage.
By following your pinouts I was able to fit a slightly newer cluster into my non-abs focus mk1..by shorting pins 5 & 6 to ground..thank you
Koji je problem sa tim malim bordicem i na koji način si napravio ovo. Pozz
Hello, I'm Andy from Argentina. Very good video! One question: what are the pins that are permanently connected to + and - so that the cluster remains permanently on?
can you please make the diagram on word/notepad and send link so anyone in need could download it?
So what’s the pinout just for powering the cluster. Thanks
(2) ground, (3) 12VDC, (14) 12VDC
@@golfwagen4173what is the exact orientation for the connections? I can't understand which one is pin 1
Ok nevermind i figured it out thanks to the big ground pad shared with 3 other pins... Any way to power up retroillumination?
@@gio0042Hola, mi cluster se apaga solo a los 10 segundos de encenderlo... que pines hay que conectar a + y - para que permanezca encendido ? Muchas gracias desde Argentina!
@@andresoddi952 Hola, el cluster debería permanecer encendido sin más conexiones... Verifique que la fuente de alimentación sea lo suficientemente potente, intenté conectarlo a una fuente de alimentación de 12v 500mA pero solo funcionó con la línea de 12v de la retroiluminación desconectada, con la retroiluminación conectada El clúster seguía reiniciando y no podía permanecer encendido.
Para usarlo sin problemas lo conecté a la fuente de alimentación de una computadora. Seguramente las bombillas requieren una potencia bastante alta para funcionar al mismo tiempo... Prueba con una fuente de alimentación más potente y avísame si funciona. Perdón si la traducción es incorrecta pero estoy usando google. Saludos desde Italia
What's the pinout for engine check light?
which are the rpm and speed pins
Nice vid bro :)
Which wire is for alternator light please
Also check engine light ?
Thanks for your support and time
What is the light above the engine light
hi, could you provide me with a connection diagram of the various pins? I would like to build a driving simulator with an instrument panel of a focus mk1 and I would need to know the connection diagram of each indicator and each warning light. Thank you
Selam benim 2004 benzinli manüel vitesli aracımın ekranı geç devreye giriyor bunu neden yapar?
Benzinli bitince uyarı ışığı yanmıyor şamandıra ve benzin pompası değişti bunun için
hey man. is there a problem with your ford focus ? because the rpm starts so high ( 7000 rpm ) and then goes down again. Or is it normal ? 🧐
What pins are the main supply to the cluster?
(2) ground, (3) 12VDC, (14) 12VDC
Hey, I need the pinout of this meter because I want to use it together with arduino in racing games, I'm counting on your help. I care most about the speedometer, tachometer, liquid and fuel gauge and the display showing the mileage.
did u find it i wont it to
pls
I dont have 😪
tryna do the same thing and cant find much info about this cluster
I dont have more information, sorry
سيارتي فوردفوكس2002محرك 18عدادالحرارةلايعمل والمراوح دائماشغلاتان مع حركةالسيارةارجومنكم الردوشكرا
how to turn off the light check motor, battery and " ! " in a circle
and what the fuck do I need it?