Excellent ! outstanding ! Sincere & honest teaching & Demonstration attitude. Thoroughly described every little steps. Thanks to spread knowledge to others. JazakAllah ! With love from Karachi.
काफी एक्सप्लेन करने की कोशिश की है। आपका अनुभव काफी है इसलिये उसी कॉमन सेंस से आप बता रहे है। मेरा मानना है कि अगर आप वोल्टेज, मिली-एम्प और वाट से वैज्ञानिक भाष में बता पाते तो अधिक अच्छा समझा पाते और हम समझ पाते।
धन्यवाद सर, करंट और वोल्टेज को मैंने इस वीडियो में समझाने की कोशिश की है, हो सकता है यह वीडियो आपको कुछ आसान लगे ruclips.net/video/4y_eRwiiGOU/видео.html
आप ने बहुत ही सरल सुमेकित शब्दो मे समझाया ऐसा समझाने का तरीका हर किसी के पास नही होता आप बहुत ही मेहनत कर वीडियो बनाते और समझाते है आपकी नयी वीडियो का इन्तजार रहता है आपको प्यार भरा प्रणाम✌
@@nileshmistri9186 12w ,120 led wale panel me ek led 0.12w ki hoti jo ki 3 volt ki hi ek led hoti but sabhi led series me lgi hoti h is liye current drop nhi hota.
Very good and correct sir. Maximum youtuber led ke volt ko watt batate hai. 3 lines ko 3 watt led batate hai , jab ki woh 3*line =12 volt 1watt ki hoti Hain
12 watt nhi 12 volt hai wo aur ha uper unki comment me kuch mistake hai 4*line=12 volt hota hai.. Aap aise samjhe 1 line 3volt ki hoti hai 2 line= 6volt , 3 line = 9volt Aur 3volt ki LED 0.5watt ki aati hai. Aur 6v,and 9volt 1 watt me aati hai. .
Dear seen your vedeo Very excillent and knowledgable vedeo. One question sir our one 15 watt surface moint led loght have 100 led in 3 v and .5 watt. How its connection in 15 watt. Can claryfy it. With thanks
Sir, your light is a surface mount light. In any concealed light or panel light, an LED of 0.1w, 0.15w, 0.2w, 0.30w and 0.5w is used. So in your case, your LED is a 0.15 watt LED, so it is a 15 watt LED in total. Yes, but all LEDs are of 3 volts. In these lights, the voltage remains the same but the wattage reduces, so the current increases for High britness. W=V*I
अरे भाई थोड़ा बड़ा बड़ा खींचना चाहिए था बड़ा बड़ा उसको एलइडी का चित्र बनाना चाहिए था वही छोटा मोटा गुjur गुjur कर रहे हो हमें भी अपनी आंखों का पूरा जोर लगा देना पड़ रहा है देखने के लिए वीडियो से बहुत अच्छी बनाई है समझाइए इसके लिए थैंक्स
Thanks brother. COB chip agr less than 20 watt hai to 9 volt ki battery se aur agr 50watt ke approx hai to ac supply 230v but series board se check kr sakte hai.
Sir 3v smd lED 150ma ka current leti hai aur 6-9v ko100 ma ki jarurat padti hai aur series me v bad jata hai parallel me A us sthiti me volt aur ma kaise calculate hoga
Sir bas kuch din aur aap wait kr lijiye main isi topic pr ek details video bnane wala hu. Main abhi ek urgent work pr bahut jada busy hu ye work complete hote hi main SMD LED series parallel combination and Current, voltage division pr ek video bnaunga jald hi.
Please upload few videos of "How to replace two three leds which are burnt or having black spot on the plate" for this fuse leds sometimes full plate doesn't glow or partly glows. Without replacing full plate how to fix new leds on that plate, by applying heat.
Ha ji sir bilkul 50w or 70w 300ma ke driver without warranty wali light me use hote hai. Thik hai main koshish karunga next time is topic ko cover krne ki.
3v ki Kam LED Wale plate me jyada ma ka driver or jyada LED Wale plate me kam ma ka driver ye dobara samjha dijiye sar. LED ke series parallel connection kaise Lage hai ye kaise check karte hai?
Sir main pahle check krta hu tabhi video me batat hu. Usme led jada hai is liye voltage requirements increase ho jati hai aur 50w 750ma ke driver ki voltage 50w1500ma ki comparison jada hoti hai.
@@PerfectLightWale Thank You Sir for clearing my doubts and replying so soon. Fir bhi agar Same pcb mein 120 led wali, 1500 miliamp chalega ya nuksaan karega ? Kindly reply.I am asking for enhancing my knowledge Sir .
1500ma ke 2 driver parallel combination bna kr agr pcb chal rahi hai to thik hai, agr series bna kr chal raha hai to jada din tk pcb nhi chal pati hai., Note: parallel combination means driver ke output positive to positive and negative to negative add ho.
Excellent teaching thanks a lot please tell me how to identify a driver to understand wether it is 50 or 60 watt and so on if not written on the subject thanks
Thanks for your valuable feedback. You can easy identify any driver Step1: measure output voltage Step2: measure output current Than watt= voltage×cuttent Example: output volt is 35(approx) Output current Is 1.5(1500ma approx) Then watt= 35×1.5 = 52watt
Hello Sir....After watching this video, I had impression that LED drivers are of 3v DC out put only, although drivers are either 12v, 24v, 42 or 48v DC or any higher voltage on custom LEDs . You didn't mention it in video. 2nd, LEDs are fabricated in combination of series n parallel and hence voltage from from driver on LED for 3c, 6v or 9v are established. 3rd, you must explain how much current a LED requires? Based on 26:56 law, your viewer can calculate actual demand of PCB, and then he can select required driver of required voltage n current. Hope you will educate your viewer. I am writing to you as I hold Master degree in Electronics and have 41 years of experience in Industrial production environment. Also I was regular teacher in a professional industrial training institute backhome for 4 years before I migrated to Canada. Thank you for understanding. Syed, Canada
3v to 9v Smd LED ki current range 80ma to 170ma rahti hai 3v ki battery se sirf 3v ki LED hi chalegi 6v aur 9v ki led aap 9Volt ki battery se chla sakte hai.
LED series and parallel donon, hi tarike se Lagai Jaati h. Ye depand krta h Designer ke uper but mostly company's 100 w ki mcpcb me 50led series aur 50 led paraller me lgati hai.
1 led agar 6 volt 1w ki hai to aap 50w 750ma ka driver try kr sakte hai. For better light aapko 30w 900ma ke 2 driver Parallel combination bna kr use krna chaiye.
अपने सही तरीका से जो फार्मूला है उस तरीका से नहीं बताया है मुझे ऐसा ही लग रहा है आप आपका एक्सपीरियंस के हिसाब से बताया है एक्चुअली कैसा होना है वह नहीं बताया है फिर भी सही अप्पके एक्सपीरियंस
Excellent ! outstanding ! Sincere & honest teaching & Demonstration attitude. Thoroughly described every little steps. Thanks to spread knowledge to others. JazakAllah ! With love from Karachi.
Thank you very much for appreciating my work!
I made a small effort and I am very happy to know that you learned something from my effort.❤️
Sir your work is appreciable.
Absolutely we learn something from you👌 thank you very much
🙏❤️
There is space to improve the presentation and to provide more knowledge.
Syed Arif Akhter
Bramton, Canada
सर पुरे यूट्यूब पर कभी नहीं देखा है ऐसा समझाया है मुझे बहुत खुशी हुई है धन्यवाद
आपका बहुत बहुत धन्याबाद ,अगर मैं आपको थोडा भी कुछ सीखा पाया हु तो वस मेरा प्रयाश सफल हो गया 🙏
सही कहा..❤
धन्यवाद❤️
Mai digital metre ka kam karta hun। Component kaise milega।local me available nhi hai
Led ka current (A) kitna hai kesa pata kre
उपयोगी जानकारी है इस वीडियो में , मेरी तरफ से आपको शुभकामनाएं
धन्यवाद सर
Very good information dear friend thanks for your class
🙏❤️
बहुत दिक्क़त है विसुअल से। ये मल्टीमीटर वाला टेक्निक बहुत शानदार है। दिल से धन्यवाद ❤
❤️💐
वैरी नाइस सर बहुत बारीकी से समझाया मैं आपका फैन हो गया आज से आप मेरे गुरु है, 👍👍👍👍👍
Thanks For your appreciation 💐❤️
इस VDO मे बहूतही अच्छी तरहसे समझाया है आपने. धन्यवाद! आपने ड्राईव्हरके बारेमे वाॅटेज बताया है.लेकिन व्होल्टेज के बारेमी नही.
ruclips.net/video/4y_eRwiiGOU/видео.html आपके इस quastion ka answer मेने इस वीडियो मे दे दिया hai
काफी एक्सप्लेन करने की कोशिश की है। आपका अनुभव काफी है इसलिये उसी कॉमन सेंस से आप बता रहे है। मेरा मानना है कि अगर आप वोल्टेज, मिली-एम्प और वाट से वैज्ञानिक भाष में बता पाते तो अधिक अच्छा समझा पाते और हम समझ पाते।
धन्यवाद सर,
करंट और वोल्टेज को मैंने इस वीडियो में समझाने की कोशिश की है, हो सकता है यह वीडियो आपको कुछ आसान लगे
ruclips.net/video/4y_eRwiiGOU/видео.html
Very informative vdo hai...I personally got very practicable knowledge and I must do apply in my practice in LED repairing job.thank u so much.
Thank you❤️💐
आप ने बहुत ही सरल सुमेकित शब्दो मे समझाया ऐसा समझाने का तरीका हर किसी के पास नही होता आप बहुत ही मेहनत कर वीडियो बनाते और समझाते है आपकी नयी वीडियो का इन्तजार रहता है आपको प्यार भरा प्रणाम✌
सर बहुत धन्यवाद
आप ही जैसे भाइयो का ही support मिल रहा है इस लिए आगे भी मैं समय निकाल कर एक अच्छा content साझा करूँगा ।
Thanks for learn us in easy method...
Thanks sir❤️💐
Sisca panal light 12W ma 120 Led ha to kitna v ki led ho gi
@@nileshmistri9186 12w ,120 led wale panel me ek led 0.12w ki hoti jo ki 3 volt ki hi ek led hoti but sabhi led series me lgi hoti h is liye current drop nhi hota.
आपने बहुत उपयोगी जानकारी दियी है हमे बहुत उपयोग मे आयेगी
Series और parrell के बार मे जानकारी देते तो बहुत अच्छा होता
Bahut Dhanyawad 💐❤️
Uske liye bhi video channel pr available hai sir
Aapne mujhe Zero se Hero bana diya..Thank you so much🙏
Thanks Brother ❤️💐
Bahut hi achhchhi jankari di apne i like this
Bahut shukriya brother 💐
youtube.com/@electronicsolutions-irfan?si=oowanypEV3tNfRb5
Thank you so much sir
I taught big knowledge from you sir.
Thanks For your appreciation 💐❤️
Very good technical explanation sir
Thank you❤️💐
Very good and correct sir. Maximum youtuber led ke volt ko watt batate hai. 3 lines ko 3 watt led batate hai , jab ki woh 3*line =12 volt 1watt ki hoti Hain
Ji bilkul sahi .
Thanks for your appreciation ❤️
@@PerfectLightWaleAap to dikhaye 3 line means 9volt.
Yes you are right
@@PerfectLightWale Tab sahi kon sa hai 9volt ya 12volt?Jinhone comment Kiya hai wo 3 lines means 12volt bola hai.Aap usko bilkul sahi reply Kiya.
12 watt nhi 12 volt hai wo aur ha uper unki comment me kuch mistake hai 4*line=12 volt hota hai..
Aap aise samjhe 1 line 3volt ki hoti hai
2 line= 6volt , 3 line = 9volt
Aur 3volt ki LED 0.5watt ki aati hai.
Aur 6v,and 9volt 1 watt me aati hai. .
बहुत सुन्दर जानकारी दी है आप ने
धन्यवाद
धन्यवाद 💐❤️
Very nice sir,bahut sahi tarike se bataya hai.Dhanyavad.
Dhanyawad sir💐
बहुत अच्छी तरह से समझाया
धन्याबाद जी सर। 💐
sir apka torrika bahut assa dusre ne aisa nahi samjata he❤❤❤❤❤❤❤❤❤❤
Bahut shukriya ❤️💐
बहोत अच्छा समजाया सर
आपका धन्यवाद.
Thank you brother 💐
Very nice explain. Thanks.
Bahut Shukriya 💐❤️
आप का वीडियो बहुत अच्छा है
आपको मेरा ये वीडियो अच्छा लगा, मेरा प्रयास सफल हो गया💐।
Really informative and useful. Catalog does not show small wattage chips like 3 ,6 and 9 watts
Thank you sir
Your teaching methods are really impressive
🙏❤️
Dear seen your vedeo
Very excillent and knowledgable vedeo.
One question sir our one 15 watt surface moint led loght have 100 led in 3 v and .5 watt. How its connection in 15 watt. Can claryfy it.
With thanks
Sir, your light is a surface mount light. In any concealed light or panel light, an LED of 0.1w, 0.15w, 0.2w, 0.30w and 0.5w is used. So in your case, your LED is a 0.15 watt LED, so it is a 15 watt LED in total. Yes, but all LEDs are of 3 volts. In these lights, the voltage remains the same but the wattage reduces, so the current increases for High britness.
W=V*I
Thank You for sharing the knowledge.👍
❤️💐
Thank you sir ..confusion dur kar diye..🙏
आपका बहुत बहुत धन्याबाद ,अगर मैं आपको थोडा भी कुछ सीखा पाया हु तो वस मेरा प्रयाश सफल हो गया 🙏
अरे भाई थोड़ा बड़ा बड़ा खींचना चाहिए था बड़ा बड़ा उसको एलइडी का चित्र बनाना चाहिए था वही छोटा मोटा गुjur गुjur कर रहे हो हमें भी अपनी आंखों का पूरा जोर लगा देना पड़ रहा है देखने के लिए वीडियो से बहुत अच्छी बनाई है समझाइए इसके लिए थैंक्स
सर आपका बहुत-बहुत धन्यवाद आगे से मैं ध्यान रखूंगा की वीडियो में बड़ा ही बड़ा लिखा दिखे 💐❤️
सर आपने
व्हिडिओमें led बारेमे उपयोगी जानकारी दी है. हम भी कुछ जानने की कोशीश करुंगा.
धन्यवाद 🙏❤️
Bahut achchi jaankari dete hai bhaiya ji
Thank you💐❤️
@@PerfectLightWale you welcome bhaiya ji
@@PerfectLightWale bhaiya aapse yek request mai ki aap aur video post kare kyu mujhe aapki video Jada achhi lagti hai
Sure👍
Thanks great information I am from Pakistan Multan say
Shukriya ❤️
विस्तार से जानकारी दी अच्छा लगा Like This Video
Bahut shukriya brother ❤️
मेरी कोशिश यही थी कि आसान तरीके से ये जानकारी साझा कर सकु।
Very informative videos sir ji appreciate your work and your time 👍
Thank you ,
I will try my best. I can share similar information with you in future also.
very good information
Thank you❤️💐
Tqsm sir jee , bhagwaan ki kirpa aap par hamesha bani rahe🙏🙏😊
Bahut shukriya Dost 🙏. Main koshish karunga aage bhi best se best content aapko de saku .
Very nice,grateful for your information
Thank you 🙏❤️
Bhot hi acche tareeke se smjhaya bhai aapne useful information
Bhai COB chip ko check krne ka kya tareeka hai
Thanks brother.
COB chip agr less than 20 watt hai to 9 volt ki battery se aur agr 50watt ke approx hai to ac supply 230v but series board se check kr sakte hai.
@@PerfectLightWale thank u brother mere question ka turant answer krne ke liye huge respect for u 🙏
Welcome brother
Can i get your mobile number please
Please detail about matters written over driver besides wattage and current
Ok sir noted, i will make a detail video on this topic
Excellent explanation 👌🏼
Thank you💐❤️
Aapne. Ache. Se. Samjhaya. Bhai. Dhanyawad. Bha. ♥🧡🧡💟
Thank you❤️💐
Backlight Tester se 3- 300v tak check ho sakta hai jo led tv mechanic use karte hain.
Ji bilkul.
Bohat best nolage
Bahut Shukriya 💐❤️
Nice and informative ,sir
Thank you💐❤️
Nice information.
💐❤️
Sir app street lights SMD 3 ,6 or 9 volt ka video banaya
Sir 3v smd lED 150ma ka current leti hai aur 6-9v ko100 ma ki jarurat padti hai aur series me v bad jata hai parallel me A us sthiti me volt aur ma kaise calculate hoga
Sir bas kuch din aur aap wait kr lijiye main isi topic pr ek details video bnane wala hu. Main abhi ek urgent work pr bahut jada busy hu ye work complete hote hi main SMD LED series parallel combination and Current, voltage division pr ek video bnaunga jald hi.
G faad info about led.
Very nicely explained
Thank you
Please upload few videos of "How to replace two three leds which are burnt or having black spot on the plate" for this fuse leds sometimes full plate doesn't glow or partly glows.
Without replacing full plate how to fix new leds on that plate, by applying heat.
Noted👍
Very nice brother good knowledgeable video.
Thanks for appreciation sir❤️
Very... Very... Nice.. Bhai
Thanks brother ❤️
Nice, easy learning vedio
Thanks sir💐❤️
Sir agar 3V ka 90 to 105 led k liye 50w-- 1500 mA lagta hai toh if led kam ho jaise ki 15 to 30 led. Usme kya lagega sir
Agr LED 3v 0.5w ki hai to isme 7w ka driver in 15 led wale me, and 15w ka LED driver 30led wale me lagega
I am impressed with the best guideline.
Thank you ❤️❤️
Very nice 🌷🌷🙏🙏
Thank you💐❤️
Very important knowledge.
Thank you ❤️
Thank you sir for usefull video
🙏❤️
बहुत बहुत धन्यवाद सर।।❤❤❤❤❤❤
❤️🙏
Sir smd lED 3v haf w me kitne mili A lagega aur 6and 6v 1w me
0.5w 3v : 120- 150ma
1w 6v : 300ma aprox
Waheguru ji mehar karan veer ji
🙏❤️
Bahut behtarin
Thank you💐❤️
Please show the technic for replacement of burnt led from the plate.
Okay
Thanks sir very helpful video and information thanks 🙏👌
Thank you ❤️
Very good tutorial, good.
Thanks sir❤️💐
Pls bataye kya driver 50 watt 750 MILIAMP ka pf ka use kar ke bana sakte hai ki nahi
Nhi sir uske liye transformer aur MOSFET and PWM ic ko bhi change krna hoga. Tabhi kisi driver ki output change kr sakte hai.
Mostly market me 300 ma ke draiver Bali light hai 300ma ke bare me bataye
Ha ji sir bilkul 50w or 70w 300ma ke driver without warranty wali light me use hote hai. Thik hai main koshish karunga next time is topic ko cover krne ki.
बहुत सुन्दर 😊
Thanks Gopal bhai ❤️💐
What about the series and parralel connection and input voltage?
I will make a video in which I will try to explain the series and parallel connection of LEDs.
Very good vdo
Thanks for your appreciation 💐
Nice video
Thank you brother ❤️
9 watt dob uses 20 led. What is the voltage of each led?
9watt ke mcpcb ka led laganese jalta nehi Kew?
Perfect information 😊
Thanks for your appreciation 💐❤️
3v ki Kam LED Wale plate me jyada ma ka driver or jyada LED Wale plate me kam ma ka driver ye dobara samjha dijiye sar. LED ke series parallel connection kaise Lage hai ye kaise check karte hai?
Uske liye aap ye video dekh sakte hai
ruclips.net/video/4y_eRwiiGOU/видео.html
Very good tutor. 🙏
Thank you🙏❤️
Bahut bahut dhanyawad sir ji
Thanks for your support 💐❤️
sir, please clear about the current calculation of LED PCB by Series Parallel Combination, it will be very helpful
Ok noted , I will try to make a video on this topic
Sir GD morning I from Roorkee please tell how can be find the current and voltage required for high watt mcpcb
We can find easily by using this formula W= V×I
The voltage and watt can be detected by looking at the LED's line.
Aapne last mein 3volt 130 led mein 750 mamp bataya hai, jabke usme 1500 mamp ka hi lagega. Kindly recheck please.
Sir main pahle check krta hu tabhi video me batat hu.
Usme led jada hai is liye voltage requirements increase ho jati hai aur 50w 750ma ke driver ki voltage 50w1500ma ki comparison jada hoti hai.
@@PerfectLightWale Thank You Sir for clearing my doubts and replying so soon. Fir bhi agar Same pcb mein 120 led wali, 1500 miliamp chalega ya nuksaan karega ? Kindly reply.I am asking for enhancing my knowledge Sir .
1500ma ke 2 driver parallel combination bna kr agr pcb chal rahi hai to thik hai, agr series bna kr chal raha hai to jada din tk pcb nhi chal pati hai.,
Note: parallel combination means driver ke output positive to positive and negative to negative add ho.
@@PerfectLightWale Thank You again Sir for replying so soon and solving my doubts. Thank You.
🙏❤️
Veryy nice video sir ji
Aapka bahut bahut Dhanyawad 💐💐
Excellent teaching thanks a lot please tell me how to identify a driver to understand wether it is 50 or 60 watt and so on if not written on the subject thanks
Thanks for your valuable feedback.
You can easy identify any driver
Step1: measure output voltage
Step2: measure output current
Than watt= voltage×cuttent
Example: output volt is 35(approx)
Output current Is 1.5(1500ma approx)
Then watt= 35×1.5 = 52watt
Hello Sir....After watching this video, I had impression that LED drivers are of 3v DC out put only, although drivers are either 12v, 24v, 42 or 48v DC or any higher voltage on custom LEDs . You didn't mention it in video.
2nd, LEDs are fabricated in combination of series n parallel and hence voltage from from driver on LED for 3c, 6v or 9v are established.
3rd, you must explain how much current a LED requires?
Based on 26:56 law, your viewer can calculate actual demand of PCB, and then he can select required driver of required voltage n current.
Hope you will educate your viewer.
I am writing to you as I hold Master degree in Electronics and have 41 years of experience in Industrial production environment. Also I was regular teacher in a professional industrial training institute backhome for 4 years before I migrated to Canada.
Thank you for understanding.
Syed, Canada
Bhai ek video led bulb se bike ki hed light 12 v tak ki banao plesssssssssssssssss
Noted,
I will try👍
1 led 3v 6v and 9v kitne kitne mili amoere leti hai. Or agr usko 3v battery se kaise chalayen kyunki battery me 3.7 to 4.2 v aata hai
3v to 9v Smd LED ki current range 80ma to 170ma rahti hai 3v ki battery se sirf 3v ki LED hi chalegi 6v aur 9v ki led aap 9Volt ki battery se chla sakte hai.
Best knowledge base
Thank you💐❤️
led series me lagi hoti hai ki perelal me, or 3v ki 100 led ka board hai to uske kitne volt, ampere hote hai us per ek video baniye
LED series and parallel donon, hi tarike se Lagai Jaati h. Ye depand krta h Designer ke uper but mostly company's 100 w ki mcpcb me 50led series aur 50 led paraller me lgati hai.
Very nice video sir ji danybad 👌🌻🙏
Thanks for your appreciation ❤️❤️
Very nice sir ji❤❤❤❤❤❤❤❤
Thank you ❤️
Kitna parallel me laga hai kitna series me
ruclips.net/video/4y_eRwiiGOU/видео.html
72 watt Mcpcb me konsa driver lagaya jata hai
1 led agar 6 volt 1w ki hai to aap 50w 750ma ka driver try kr sakte hai. For better light aapko 30w 900ma ke 2 driver Parallel combination bna kr use krna chaiye.
Try to teach how to calculate amp as well
Noted
🙏🙏🙏👍👍👍 very useful informations 👍👍👍
Thanks for your appreciation ❤️
धन्यवाद गुरु जी।
❤️💐
अपने सही तरीका से
जो फार्मूला है उस तरीका से नहीं बताया है
मुझे ऐसा ही लग रहा है
आप आपका एक्सपीरियंस के हिसाब से बताया है
एक्चुअली कैसा होना है वह नहीं बताया है
फिर भी सही अप्पके एक्सपीरियंस
Ok I noted your point next time I will describe a formula trick.
Power=Voltage x current
Sir mujhe 50w ka driver chahiye 1200mA 23-36vdc
Sir available hai.
For LED spare parts and components please sent a massage in this whatsapp link.
wa.me/c/919012671271
Ek dum sahi h
अति सुन्दर ।
धन्यवाद ❤️💐
Sir app ke pass Keya Sara led ke spear parts mil jayega. Mujhe kuch saman chahiye tha.
Yes sir.
For spare parts and Lights please visit our whatsapp link 👇
wa.me/c/919012671271
Very nice, but what is the price of both driver's😊
Thanks 🙏💐.
You can visit our online store link in description
Bhai. Mujhe. Baht. Ache. Se. Samzha
1 line wali led ka resistance kitna hota hi
3volt
3volt
Ye muje jankari nhi hai kabhi jarurt hi nhi padi smd LED Ki Resistance janne ki.