Wow, your bike is really turning into a MEAN machine. Like other viewers, I was skeptical at first but it really took your bike up to another level. Keep it up
The streetbob is the best because it’s a simple bike to add too and it can go any way from club style to bobber to pro street. It’s made to fit anyone’s style.
Watching from day 1 Gin your bike has been evolving into a Beautiful Black Beast for I have my own Black Beast and Thankyou for your vids I do enjoy them good Intel on how to plus innovative mods on same Harley model i own , bike looks great , .👍
NICE....getting a custom set of the same rim in chrome for my 06 yamaha stratoliner and cant wait to see how there going to look on it. Thanks for the video
Dude I was scared before I watched this. But oh no no no!! It looks killer!! I can't wait for the ride review. All the best to you and yours from Kansas city mo!
Hey Gingy how's it hangin, nice video but as far as the Russ Wernimont 21" fender goes, im curious if its the 5.5" LS-2 F/21 for the Breakout fender you purchased for your bob?
To be honest mate I'm not sure, I purchased the fender from brown industries in Australia. They could help you out as I can't find the part number for it.
Here's a link to the lift www.ebay.com.au/itm/NEW-Motor-Bike-Jack-Hydraulic-Lift-Harley-Davidson-Motorcycle-Paddock-Stand-XX-/372792786857?_trksid=p2349624.m46890.l49286
Did the front fender go back on without any issues? I recently added the same size rims and tire to mine and I'm worried about clearance and the wheel getting caught on the fender
I've seen some pretty cool modded xg500's Check out this link www.google.com.au/amp/s/darkkustom.com/harley-davidson-bobber-street-500-toxic-smoked-garage/amp/
If you message brown industries they will be able to help you out. They're based in Australia. Here's there Facebook page facebook.com/Brownindustries29/
So I have a question and it may be a dumb one but I ordered a 21*3.5 front wheel for my Softail Street Bob and I was curious if you knew the size of the axle?
Thanks mate. Here's an ebay link to the lift I bought. www.ebay.com.au/itm/NEW-Motor-Bike-Jack-Hydraulic-Lift-Harley-Davidson-Motorcycle-Paddock-Stand-XX-/372792786857?_trksid=p2349624.m46890.l49286
I bought it from an Aussie SMT supplier called Rick STRINGER, you can find him on instagram. The wheel with a tyre fitted and postage from the U.S was $1900
I sold the slipstream seat after deciding on going with a stretched rear fender which ill be reinstalling on the bike later. I prefer the look of a solo seat with the stretched rear. I found the seat very comfortable on long rides and preferred it over the saddlemen step up
Thats a good question mate. My father in law said the same and I joked saying the tyres only flat on the bottom. To be honest I don't know how it'll go 👍
All the info is in the vid man. Its a 21 inch SMT big fatty wheel. Just Google SMT wheels and the website will pop up 👍 www.smtmachining.com/shop/big-fatty-front-wheel/
I bought the front fender from an Australian company called Brown industries, you can find them on instagram. I kept the rear wheel stock as they're pretty expensive wheels. The 21 inch front wheel did change the handling a little bit as it felt a tad heavier in the front end. It isn't a massive change from the stock 19 inch front wheel though.
@@TheGingybeardMan thank you for the response. Was it a direct bolt on fender or did u have to modify? Nice looking bike by the way. I have the same bike but mine is white and I’m thinking of doing the same.
@@TylerDylan21 the fender was a direct bolt on. It comes with adapter brackets which need to be used. This fender is no good with the stock 19 inch wheel as it scrapes at the rear. Its only to be used with a 21 inch front wheel
@@TheGingybeardMan since you said you felt a slight difference as far as being heavy in the front with the 21, I might have to reconsider. Thank you for the input 🙏🙏
Hey there boss I wanted to ask if you mind sharing what modifications if any needed to be done in order to make this wheel fit ? Same factory fender fit? Looking to do this modification myself on my fxbb Thanks in advance
There was no mods at all needed to fit this front wheel its a direct bolt on. You can also use the stock fender with it. I purchased the russ wernimont front fender from a company in Australia called Brown industries. They didn't provide a receipt stating what model fender it is. I just messaged them asking for a wrap around fender to fit and they stated they had one in stock for a 21 inch front wheel. Shoot them a message on instagram and they'll help you out. Just screenshot a pic of my bike with the wrap around fender and send it through to them.
Is this For breakout fender in russ werninmont site? Two product this site one thing for breakout another thing Ls-2 flared ? i’m street bob which fender should i choose?
Ill be putting it back on soon. Ive just got to respray it. The paint shop did a very ordinary paint job and there was white overspray flecks all through it
@@TheGingybeardMan I like the look mate but few questions . Why the gators back? What happened to your rear fender ? What bars are you running ? Is that still standard seat? Did the tank conversation work out..... did your trip meter sort itself out ?
@@robbaker9817 I reinstalled the gaitors as I was getting scratches on the forks from road debris. I plan on installing gloss black metal fork covers later on. I need to have the stretched rear fender resprayed as the paint shop did a terrible job. There was small white overspray flecks all through it. Im currently running the stock seat as I prefer the look of a solo seat for the style im going with. Ive just bought a saddlemen renegade solo seat so keen to see if that's more comfortable. The guage didnt recalibrate to show the true milage but otherwise the tank conversaion was a success.
Youre right mate but at close to $2000 a wheel ill have to wait and save my pennies to buy the rear. I wouldn't say its off-putting as it still looks much better than stock but it does need a rear to match
![4 AMAZING Harley-Davidson STREET BOB FXBB Custom [4K] * A&T Design](http://i.ytimg.com/vi/uk-oE9pbYQk/mqdefault.jpg)
![4 AMAZING Harley-Davidson STREET BOB FXBB Custom [4K] * A&T Design](/img/tr.png)
Wheel is a 21x 3.25 inch SMT big fatty wheel. See below link to the website.
www.smtmachining.com/shop/big-fatty-front-wheel/
What size tire did you mate to that rim?
@@bobwaller9043 Shinko Front 777 Tyre 120/70-21 👍
Wow, your bike is really turning into a MEAN machine. Like other viewers, I was skeptical at first but it really took your bike up to another level. Keep it up
Thanks man, I cant wait to put the stretched rear fender back on the bike once I get it resprayed. I think it'll suit the front end better 👍
The streetbob is the best because it’s a simple bike to add too and it can go any way from club style to bobber to pro street. It’s made to fit anyone’s style.
exactly
I just want to thank you so much for your vids. I have a 21 fxst. And have been trying to figure witch way to go with it. Your vids inspire my build.
Thanks man, thats great to hear 🤙
The vid we’ve all been waiting for
Watching from day 1 Gin your bike has been evolving into a Beautiful Black Beast for I have my own Black Beast and Thankyou for your vids I do enjoy them good Intel on how to plus innovative mods on same Harley model i own , bike looks great , .👍
Thanks mate, its nearly at a point where ill be happy, just a few more mods to go 😅😅😅
NICE....getting a custom set of the same rim in chrome for my 06 yamaha stratoliner and cant wait to see how there going to look on it. Thanks for the video
A 18" rear wheel with the stretched fender and this bike would be 👌👌👌👌
100% agree. Just need to repaint my stretched rear fender 🤙
Looks awesome I just think it needs a matching rear wheel instead of the spokes.
OOOOH WEE!! NOW I WANT A 22" ON MY NEW 2022 HARLEY STREET BOB! THANKS BROTHER DIDNT KNOW IT COULD BE DONE!
Beautiful set-up!! Please update with a ride change if any. I'm looking to do the same.
Definitely will do mate 👍
Dude I was scared before I watched this. But oh no no no!! It looks killer!! I can't wait for the ride review. All the best to you and yours from Kansas city mo!
Cheers mate, I think the stretched rear fender will suit the overall style of the bike once I get it repainted and reinstalled 👍
@@TheGingybeardMan absolutely 💯 it will!!
Fantastic, love those full cover front fenders.
Hey Gingy how's it hangin, nice video but as far as the Russ Wernimont 21" fender goes, im curious if its the 5.5" LS-2 F/21 for the Breakout fender you purchased for your bob?
To be honest mate I'm not sure, I purchased the fender from brown industries in Australia. They could help you out as I can't find the part number for it.
Like night and day - GREAT change!!!
Great video once again. Do you have a info on the lift you are using on this video?
Here's a link to the lift
www.ebay.com.au/itm/NEW-Motor-Bike-Jack-Hydraulic-Lift-Harley-Davidson-Motorcycle-Paddock-Stand-XX-/372792786857?_trksid=p2349624.m46890.l49286
Radical bike bro!! But any ideas for the rear tires?
Thanks Man, I've since sold the bike. Never git around to doing the rear wheel.
Stunning man... As always very nice video. Can't wait what you have planned for the rear section
Ill be reinstalling my stretched rear fender when I get it repainted. I plan on buying a matching rear, when I save my pennies up 😂😂
Hey mate looks awesome. Just a question mate what tool did ya use to take the front wheel off the and the axle out mate
Thanks mate, I used a 19mm hex socket mate
Did the front fender go back on without any issues? I recently added the same size rims and tire to mine and I'm worried about clearance and the wheel getting caught on the fender
I had no clearance issues with the aftermarket front fender.
Love it mate, Huge fan of your bike, cant wait till i can upgrade (stuck on a xg500 for a few years yet)
I've seen some pretty cool modded xg500's
Check out this link
www.google.com.au/amp/s/darkkustom.com/harley-davidson-bobber-street-500-toxic-smoked-garage/amp/
@@TheGingybeardMan Yeah have looked at them, they look good
Brilliant mate, absolutely brilliant.
Thank you Sir
That really sets it off, nice one.
Awesome Can I get a link to buy a front fender?
If you message brown industries they will be able to help you out. They're based in Australia. Here's there Facebook page
facebook.com/Brownindustries29/
So I have a question and it may be a dumb one but I ordered a 21*3.5 front wheel for my Softail Street Bob and I was curious if you knew the size of the axle?
Sorry mate I didn't need to measure the axle as SMT advertise there wheels to fit without any modification 👍
Did you have to change spacers or do any modifications to go from 19x2.15 to 21x3.25
No it's a direct bolt on
How was the handling after installing the new wheel
Looks great 👍🏻.
What make is your scissors lift?
Thanks mate.
Here's an ebay link to the lift I bought.
www.ebay.com.au/itm/NEW-Motor-Bike-Jack-Hydraulic-Lift-Harley-Davidson-Motorcycle-Paddock-Stand-XX-/372792786857?_trksid=p2349624.m46890.l49286
@@TheGingybeardMan thank you!!
Just when I thought I was ready to take a break on expensive mods for mine, I see this video.... damn it.
Tell me about it man, these wheels aint cheap
Looks sweet where did you order it, wheel rim fender? Cost
I bought it from an Aussie SMT supplier called Rick STRINGER, you can find him on instagram. The wheel with a tyre fitted and postage from the U.S was $1900
Nice👌 Looks Great and definitely worth the $$
The wheel looks sick homie, can’t wait to get my white walls
Thanks bro 👌
Any reason your not running the slipstream seat anymore? I’ve just ordered one hopefully it isn’t that bad.
I sold the slipstream seat after deciding on going with a stretched rear fender which ill be reinstalling on the bike later. I prefer the look of a solo seat with the stretched rear. I found the seat very comfortable on long rides and preferred it over the saddlemen step up
Ahh lovely thanks mate
Do you recon a 23 would fit ?
Yeaaaaaaaaaaasssss congrats love it mate
Cheers man, its coming together now 👍
You think your fender will be good if you ever get a flat? Does it look like it would scape?
Thats a good question mate. My father in law said the same and I joked saying the tyres only flat on the bottom.
To be honest I don't know how it'll go 👍
Was there any other parts required for this front wheel like spacers or any modifications?
No the SMT wheels are a direct bolt on
Awesome, but now the rear is asking for some love.
Sure is mate, just gotta save up my pennies. These wheels aint cheap 🤣🤣
Hi, nice wheel, what model is it? looks great, put website link, thanks.
All the info is in the vid man. Its a 21 inch SMT big fatty wheel. Just Google SMT wheels and the website will pop up 👍
www.smtmachining.com/shop/big-fatty-front-wheel/
Can you tell me did it affect the ride by putting 21 up front? You kept the rear stock right? 16? Also where did you buy the fenders from? Thank You.
I bought the front fender from an Australian company called Brown industries, you can find them on instagram. I kept the rear wheel stock as they're pretty expensive wheels. The 21 inch front wheel did change the handling a little bit as it felt a tad heavier in the front end. It isn't a massive change from the stock 19 inch front wheel though.
@@TheGingybeardMan thank you for the response. Was it a direct bolt on fender or did u have to modify? Nice looking bike by the way. I have the same bike but mine is white and I’m thinking of doing the same.
@@TylerDylan21 the fender was a direct bolt on. It comes with adapter brackets which need to be used. This fender is no good with the stock 19 inch wheel as it scrapes at the rear. Its only to be used with a 21 inch front wheel
@@TheGingybeardMan since you said you felt a slight difference as far as being heavy in the front with the 21, I might have to reconsider. Thank you for the input 🙏🙏
Does your bike has ABS? If so did you swap or replace the bearings on the new wheel?
Yes my bike has ABS. When you purchase these wheels you have the option to include an ABS bearing in the purchase.
Looks awesome!
Did you use the stock spacers and wheel bearings?
Yes mate, I used all the stock spacers. Its a direct bolt on 👍
Was there a change in handling .?
@@wd8566 yes it felt heavier in the front end at low speeds
Hey mate how much and what’s the cost where did you get them from?
Got it from a SMT supplier here in Australia called stringer collective otherwise you can buy it online directly from SMT. It cost around $2500 Aud.
The Beast is looking sweet....👍👍👍🍺
Cheers mate, I'm itching to respray my stretched rear fender to see how it matches 👍
Hey there boss I wanted to ask if you mind sharing what modifications if any needed to be done in order to make this wheel fit ? Same factory fender fit? Looking to do this modification myself on my fxbb
Thanks in advance
Also, I see that you did swap out the front fender what’s the exact model of the Russ fender that you used?
There was no mods at all needed to fit this front wheel its a direct bolt on. You can also use the stock fender with it. I purchased the russ wernimont front fender from a company in Australia called Brown industries. They didn't provide a receipt stating what model fender it is. I just messaged them asking for a wrap around fender to fit and they stated they had one in stock for a 21 inch front wheel. Shoot them a message on instagram and they'll help you out. Just screenshot a pic of my bike with the wrap around fender and send it through to them.
Nice! So I am able to use my factory rotor just swap everything over with new wheel and I’m good to go? Thanks for all your help
@@litzbrgh_tv3393 yeah man, stock spacers, axel, and rotor works with the SMT wheels.
That looks sick man!
Cheers mate 👍
Is this For breakout fender in russ werninmont site? Two product this site one thing for breakout another thing Ls-2 flared ? i’m street bob which fender should i choose?
To be honest I wasn't told which fender was the right one they just sent me one. Just shoot the company and email.
Very nice!
👌🏻
Looks awesome man, oh where is your stretched rear fender? I think it’ll looks killer with this wheel 🤘
Ill be putting it back on soon. Ive just got to respray it. The paint shop did a very ordinary paint job and there was white overspray flecks all through it
You doing 2 in over forks? Or leaving it low
Man I just sold the beast
Looks great. 😎👍
Thanks man 🍻🍻
What kind of maker is it? Do you have a stainless spokes?
The brand of the new wheel is SMT. The stock wheels spokes are stainless but I put black spoke wraps on ages ago 👍
What size socket did you use to get the a front axle off
19mm hex socket mate
Looks sick brother 🤙🤙🍻🍻🇳🇿🇳🇿
Cheers Nath 🙌
What size Allen key did you use to remove the axel?
19mm hex socket mate
wow very nice!
We're did u bought ur headlight?
stringercollective.com.au/product/5-3-4-led-bullet/
Nice
21 x 3.5 or 2.15? Thanks.
Hey mate it's a 21 × 3.5 wheel
What fender is that?
its a Russ wernimount fender for a 21 inch front wheel
Hey what the name of the front wheel rims you Put on please let me know thanks
SMT big fatty
Thanks big dog 🙏🏼
What tire did you use for this?
Shinko Front 777 Tyre 120/70-21
Ciao, sapresti dirmi la coppia di serraggio x la ruota anteriore e posteriore. Grazie e buona strada
What headlight is that??? Tia.
I did an install vid on my channel, check it out.
@@TheGingybeardMan thanks for the fast response mate. Sad to see the hog go. All the best with the house and future endeavours 👌🏾👍🏽
Fuck ya man
This is the real Fucken deal here
One word i have is sick !
Thanks brother 🤙
@@TheGingybeardMan when
U doing the rear tire ?
@@ceec6923 just gotta save my pennies up for a little while, each wheel with a tyre and shipping is close to $2000.
Superbe 🤘🤘
Can i get the part number to that wheel?
I don't have the part number but if you go onto the SMT website you can select them wheel model specific for your bike. Its the big fatty wheel
So confused mate lol each video I watch of yours , different bikes lol
I have a serious problem 😅 its nearly at the point where I won't want to spend any more cash on it.
@@TheGingybeardMan I like the look mate but few questions . Why the gators back? What happened to your rear fender ? What bars are you running ? Is that still standard seat? Did the tank conversation work out..... did your trip meter sort itself out ?
@@robbaker9817 I reinstalled the gaitors as I was getting scratches on the forks from road debris. I plan on installing gloss black metal fork covers later on.
I need to have the stretched rear fender resprayed as the paint shop did a terrible job. There was small white overspray flecks all through it.
Im currently running the stock seat as I prefer the look of a solo seat for the style im going with. Ive just bought a saddlemen renegade solo seat so keen to see if that's more comfortable.
The guage didnt recalibrate to show the true milage but otherwise the tank conversaion was a success.
@@TheGingybeardMan looking forward to seeing the saddleman on the street bob
Will pull the trigger this week bro ...thanks for the inspiration
What size tire was that
Its a 120/70-21
I wish I could buy your stock front wheel, my wife jump a curb and bent hers.
Wish I could have helped but I gave the wheel to the new owner of the bike.
What width is the wheel?
3.25 inches wide
@@TheGingybeardMan thank you
You only did one wheel? That looks off. Baggers can get away with that but on softails it's just off putting.
Youre right mate but at close to $2000 a wheel ill have to wait and save my pennies to buy the rear. I wouldn't say its off-putting as it still looks much better than stock but it does need a rear to match
Looks fantastic!
Thanks mate
Very nice!
Looks Great 👍🏻
Thank you Sir 🤙
What size socket did you use to remove the front wheel ?
19mm hex socket man 👍
Thanks brother. Safe riding 🤟🏽
@@Mateo718 no worries man, stay safe 🤙