I don't think anyone got called out for having their attention stolen by the EPP FPV plane as bad as I did. Literally busted out laughing when Josh stopped to point that out. Guilty as charged. Great video as usual. I helped contribute to your Like count on FB, which is exceedingly rare for me. Hope to see that EPP FPV review ASAP! Keep the videos coming.
Remembering the word "CRAP" sound funny but thinking about repairing the plane after the crash can make a huge difference. Anyway this video is helpful and it can guide in case you crash the rc plane in the future but crashing it, is not a option but it could happen. However if you did crash the plan, make sure you,got correct tools.
@theeverythinggeek828 Also, just to be clear. We did not glue the motor mount directly. It was held by screws to balsa plywood... and that was glued to the foam. In the chance the motor would get that hot, the plywood acts as an insulator. We would never recommend using hot glue directly on a motor mount. :)
@theeverythinggeek828 If you're motor is running that hot you are most likely over propping it (propeller size or pitch is too high). A properly matched, and running motor shouldn't get that hot. E6000 is another option. It holds really well, dries fast and is very flexible. GOOP is yet another option. It dries slower, but it's VERY strong!
Great video guys. Excellent work. One thng to add... Having repaired your plane , especially if adding lots of extra foam / tape / glue and reinforcements dont forget to re-check the Centre Of Gravity!! Andy
i was actually staring at the cow head... didnt even notice the EPP FPV haha! and thank you Josh Scott, for asking about CA! i always thought it was contact adhesive haha!
Okay this was great! I subscribed immediately! The two of you back and forth and the banter was great! The information given was invaluable and great for someone like me repairing my first channel 3 Channel foam flyer that I've damaged from learning to fly. If you could maybe slow the speed down some on the speed of delivery of the information that would make this a perfect video for newbies. Keep up the great work!
The "Fiberglass Tape", aka Scotch Extreme Tape, does not have any UV protection. Make sure you check the "yellowing" and drying out of the glue on the tape. It does fail over time.
@fisherboom Its because a wing surface like that would need a frame instead of a single carbon rod if you ask me. Then again it flies perfectly fine without such a frame and with this rod thingyfoo. It does show the rod is strong enough to go through the EPP without snapping though. :p
@LatvianRC We love it!! Most people lay it on thick... you don't have too. Plus it's flexible and strong. You know you love it too! Come on... just admit it.
If you crash and fix too often you'll end up with a heavy plane. I know 'cause that's what I did. Finally had to scrap the plane and start over. By the way, you guys should do a "Winter Flying Tips" video.
i noticed the same clicking noise from my esc. my motor spins tiny bit at a time. i checked the esc plug and it feels solid. i think it might be something wrong, but not 100% sure what
Nice. But I don't understand that you tape the ailerons when they're at neutral. I tape them fully extended from opposite direction (both sides). This ensures full travel in both directions and immense durability. Actually this should be done from the beginning, before first flight. Is the fiber tape more flexible than duct tape?
Now we know that but before we crash we need a radio to do so. Can we maybe see some Radio demo/review and the application? Got into the hobby recently got a Futaba 6J witch is great but tricky to do elevon mixing ect just and idea ? Awesome Vids Btw love the builds want to build myself the FT 3D as soon as the plans are updated for optimal Flight xp maybe build the FT spitfire in the mean time. Love From South Africa Enjoy "keep it Up"
I would Love too see Josh Scott FLY MORE, not that i don't like Bixler's flight's, cause i DO, But Scott needs to fly more, my thoughts but still want to see more then wht he's doing now, Bixler give him more flight time, or teach him more, so we can see him FLY, thanks, your Friends in the flyin world...
All your Vids are great and informative guys. Thanks. do you highly recommend Hot glue for gluing the foam. I had a minor crash and have torn the motor mount from the foam where it was glued. will hot glue suffice in the repair? (cessna182) thanks
Most CA isn't foam safe and it contains chemicals which break down foam, you can buy foam-safe CA from most hobby shops, or just search for it on the internet.
@TwilightCompunction same here. that was really funny. how many likes so far? I don't use FB. Also, is there a video that shows the effect of the wing LED lights under that black tape? I want to see how it looks...
I got a big-e fair balsa wood 2'5m powered glider from hobbyking for Christmas and I look at it today and I noticed that 3 of the wing former were cracked. :-( help!
OK you showed me in what check for to fix but didn't really tell me how to fix it or do I get the materials what kind of glue should I use where do I get the replacement form and get rid of the stupid background music that fuselis
I don't understand using hot glue, it's heavy and it doesn't flex to absorb energy. I'd have used Shoo Goo (NOT Amazing Goop) thinned down and made the repair flexible, lighter and stronger. It takes time to cure but its worth it IMO. Unlike Goop Goo is amazing! (Try using Goop on a shoe... you won't get very far)
Topvideos1001 You've never tried Shoe Goo? It's GREAT glue used on EPP foam when thinned down using Toluene solvent. The best IMO as it sticks well, stretches, and is much cheaper than other glues and used correctly can create exceptionally light weight repairs. Down side is it takes 24 hours to fully cure and reach maximum strength no other glue can match and why it is used on shoes. It melts some types of foam but EPP and some other foam types are not effected so check to be safe.
dear mr Bixler
i appreciate you dedication to this hobby. and thanks for passing on your knowledge.
Greetings from Canada. Just to let you know, the Spitfire Mk. IX on the wall is the real eye candy.
@voltoman We try to keep the show upbeat. We may do some other slower paced build videos for those who would prefer it.
I don't think anyone got called out for having their attention stolen by the EPP FPV plane as bad as I did. Literally busted out laughing when Josh stopped to point that out. Guilty as charged.
Great video as usual. I helped contribute to your Like count on FB, which is exceedingly rare for me. Hope to see that EPP FPV review ASAP! Keep the videos coming.
Remembering the word "CRAP" sound funny but thinking about repairing the plane after the crash can make a huge difference. Anyway this video is helpful and it can guide in case you crash the rc plane in the future but crashing it, is not a option but it could happen. However if you did crash the plan, make sure you,got correct tools.
@theeverythinggeek828 Also, just to be clear. We did not glue the motor mount directly. It was held by screws to balsa plywood... and that was glued to the foam. In the chance the motor would get that hot, the plywood acts as an insulator. We would never recommend using hot glue directly on a motor mount. :)
you can tell that Josh on the left takes his job more serious than the others and wishes everyone else did.
Spiderfly
another epic show! u guys are awesome, but one thing u need to add is to re-check the center of gravity!!
hahaha!!! "When we get 500 likes...."
I just checked and currently at 70,000!!! Great job guys!
+multirotorpilot haha
162,000 noe6and climbing! Wow 500 was a small goal
@theeverythinggeek828 If you're motor is running that hot you are most likely over propping it (propeller size or pitch is too high). A properly matched, and running motor shouldn't get that hot. E6000 is another option. It holds really well, dries fast and is very flexible. GOOP is yet another option. It dries slower, but it's VERY strong!
Great video guys. Excellent work.
One thng to add...
Having repaired your plane , especially if adding lots of extra foam / tape / glue and reinforcements dont forget to re-check the Centre Of Gravity!!
Andy
By far the best modeling platform on youtube!
THE GUYS ARE GREAT.I like to see nice friends having fun together
@DESPERATEPILOT great point... thanks!
i was actually staring at the cow head... didnt even notice the EPP FPV haha!
and thank you Josh Scott, for asking about CA! i always thought it was contact adhesive haha!
Keep up the good work, love the quality of your videos, nice and clear with good sound as well. Makes a big difference.
Okay this was great! I subscribed immediately! The two of you back and forth and the banter was great! The information given was invaluable and great for someone like me repairing my first channel 3 Channel foam flyer that I've damaged from learning to fly. If you could maybe slow the speed down some on the speed of delivery of the information that would make this a perfect video for newbies. Keep up the great work!
@gluino Watch our Night Fly video... you'll see this plane.
The "Fiberglass Tape", aka Scotch Extreme Tape, does not have any UV protection. Make sure you check the "yellowing" and drying out of the glue on the tape. It does fail over time.
One of my favorite episodes!
500 likes? Nope! It's 2017! 500,000+ subs!😛
Great episode guys keep them coming.
@fisherboom Its because a wing surface like that would need a frame instead of a single carbon rod if you ask me. Then again it flies perfectly fine without such a frame and with this rod thingyfoo.
It does show the rod is strong enough to go through the EPP without snapping though. :p
That was CRAP... but I loved very minute of it. Love your work guys!
very helpful..thanks guys
Good job guys, "check yor CRAP" that will certainly stick in the mind. LOL
Leigh (UK)
C.R.A.P. GEE WALLY. THIS SOUNDS LIKE A TOTALLY GREAT IDEA. WE SHOULD TELL EDDIE HASKELL ABOUT THIS...........
@LatvianRC We love it!! Most people lay it on thick... you don't have too. Plus it's flexible and strong. You know you love it too! Come on... just admit it.
03:43 THOES ARE THE FUNNIEST WORDS THAT I EVER HEARD LOOOOL!!!!! Bixler you are the best ! hahahaha
If you crash and fix too often you'll end up with a heavy plane. I know 'cause that's what I did. Finally had to scrap the plane and start over.
By the way, you guys should do a "Winter Flying Tips" video.
i noticed the same clicking noise from my esc. my motor spins tiny bit at a time. i checked the esc plug and it feels solid. i think it might be something wrong, but not 100% sure what
Again, awesome episode! Time to CRAP my balsa Shaft 25 lol
Nice. But I don't understand that you tape the ailerons when they're at neutral. I tape them fully extended from opposite direction (both sides). This ensures full travel in both directions and immense durability. Actually this should be done from the beginning, before first flight. Is the fiber tape more flexible than duct tape?
The tape was placed on a one-sided hinge, similar to the scratch builds they use, so the tapes movement would be almost none.
+Elexo Flyer thx, understood
I prefer friendships over YT likes. ;-) You got a like cause your apply for it was eloquent.
Hello to the two of you. My question is: can a gps be used in a Habu STS?
Now we know that but before we crash we need a radio to do so.
Can we maybe see some Radio demo/review and the application?
Got into the hobby recently got a Futaba 6J witch is great but tricky to do elevon mixing ect just and idea ?
Awesome Vids Btw love the builds want to build myself the FT 3D as soon as the plans are updated for optimal Flight xp maybe build the FT spitfire in the mean time.
Love From South Africa Enjoy "keep it Up"
@bicyclemonkey Coat hangers :)
I was looking at the Spitfire.
1:43 when I was starting to fall asleep till he started talking.
@flitetest point taken. Thanks for the tips :)
i love ur intro its freakin awesome
We need more Josh Scott in the new episodes.
Hey Guys ... do ca can apply at the EPP surfaces ? does it attack the foam ?
You can use hot glue for fixing EPP?? IT WOULDNT MELT IT?
I would Love too see Josh Scott FLY MORE, not that i don't like Bixler's flight's, cause i DO, But Scott needs to fly more, my thoughts but still want to see more then wht he's doing now, Bixler give him more flight time, or teach him more, so we can see him FLY, thanks, your Friends in the flyin world...
All your Vids are great and informative guys. Thanks. do you highly recommend Hot glue for gluing the foam. I had a minor crash and have torn the motor mount from the foam where it was glued. will hot glue suffice in the repair? (cessna182) thanks
Do a little googling. Google always has the answer.
everything foam i have put c,a, on has always melted. why? thanks guy's keep up the good work.
Most CA isn't foam safe and it contains chemicals which break down foam, you can buy foam-safe CA from most hobby shops, or just search for it on the internet.
Is there a name for the thin "stitches" of carbon fiber seen in 8m55s on the video? Tks!!!
@TwilightCompunction same here. that was really funny. how many likes so far? I don't use FB.
Also, is there a video that shows the effect of the wing LED lights under that black tape? I want to see how it looks...
LOL
Accountability is what puts the "c" in r/c.
What did Josh learn from his crash?
@ANODEIFY ...right on.
Another great episode. Just "liked" you on Facebook. Is there a way for people to donate $ to keep the good stuff coming?
What kind of foam are you repairing it with at 7:45 and where do you get it? Thanks
"Sky's the limit. Or the ground" :D
I got a big-e fair balsa wood 2'5m powered glider from hobbyking for Christmas and I look at it today and I noticed that 3 of the wing former were cracked. :-( help!
is this the other sponge bob reference you were talking about like people order our patties p.o.o.p. but instead it's crap
Just saw where ta scrap epp but where can you get it I can't find "epp foam"
Soon you'll see my way of making foam planes indestrutable
aw crap you never let us down
Where do u get the tape?
Is this a HK plan?...I'd love the catalog number, would like to purchase. Any assistance appreciated! Cheers.
OK you showed me in what check for to fix but didn't really tell me how to fix it or do I get the materials what kind of glue should I use where do I get the replacement form and get rid of the stupid background music that fuselis
Great! I love that crap!
What does the motor do?
Did you guys put hot glue DIRECTLY on the foam? :O
Awesome accident josh scott... hahaha..
ME TOO!
Josh blixer was so fricken young
NEVER use hot melt glue on motor mount.
Hot motor = Hot glue = Melted glue = CRASH
Lost my MPX Parkmaster 2day because of this :(
The Sky's the limit... or the ground.
I just had a really bad crash on my carbon z yak 54
what kind of foam is this? thanks
voultsi23 epp its pretty durable
these were the original characters
haha, me too!
Spongebob: POOP
FliteTest: CRAP
Bloody representative music ... If that's what you can call it .
Quacksalber und Murkser!
pullin this thing all day...hahaha :)
link to fb page pls
Im looking at the spitefire not you xD
I tried repairing my AXN with CRAP and it smelt like a farmyard.
So I will stick with Hot Glue :-)
I don't understand using hot glue, it's heavy and it doesn't flex to absorb energy. I'd have used Shoo Goo (NOT Amazing Goop) thinned down and made the repair flexible, lighter and stronger. It takes time to cure but its worth it IMO. Unlike Goop Goo is amazing! (Try using Goop on a shoe... you won't get very far)
John F Hendry what do you use to thin shoo goo?
I would answer but I have no idea what you are talking about ?
Topvideos1001 You've never tried Shoe Goo? It's GREAT glue used on EPP foam when thinned down using Toluene solvent. The best IMO as it sticks well, stretches, and is much cheaper than other glues and used correctly can create exceptionally light weight repairs. Down side is it takes 24 hours to fully cure and reach maximum strength no other glue can match and why it is used on shoes. It melts some types of foam but EPP and some other foam types are not effected so check to be safe.
Thanks, John! I wasn't aware that it could be thinned, so I never thought to use it for airplanes.
Remember to check your crap and your plane will be fine... alright.
süperrr :)
Instead of fast forwarding through the repairs, and then explaining what you did later, why not just explain while you are repairing it?
0:32
@pokemonkapper NO i DONT LIKE IT i USE EPOXY OS CA
hot glue I use to things that arent important!!!!!!!!!!
hot glue is shit (crap)
E.P.P = every plane perishes
LOL.. check our crap :X
They are using the cheap electronics like me!!
.......Different intro, hold on Ths was 7 years ago ._.
Think crap crap not shit
@ lol !
guys every
lol crap!
SPEAK a little slower, please :-)
crap
GOT TO BE GAY !!