2STROKE STUFFING Don't do it! ;) I remember the first time I tested knife edge vs rounded in my "flow bench" (hold it under the tap), I was amazed! Haven't had any knife edges anywhere since then :) I gained about 60 subs Wednesday after your recommendation so that's pretty huge for my little channel :) Biggest jump in almost 10 years! Thanks again 👍👍
@@Hollaendaren Knife edging cast iron is un-imaginable. What did you see Hollaendaren ? with you "flow bench" ??? BTW don't tell an Australian / New Zealander "don't do it". Because they're have to then do it !.
Hi, who is playing in the background? Alain Miljard has a lit of fantastic bikes, but he do not show how he goes about it, so this and twostrokestuffing are great!!!!
Russ White Haha, I only need another half a million or so subscribers and I can start doing this for a living ;) RUclips are cheapasses. But people actually being interested in my stuff is good enough!
Hey there, I have a 244 out of a polaris colt, and I am wondering if it is a good engine to do racing, planing to put it into an 1971 elan. Thanks and keep up the good work! Really exited to see the 277cc run x)
marc robichaud I have no experience with them myself but if it's the same engine as in the Gemini 250 then I'd say it's got a lot of potential! A friend has a Gemini that he runs on methanol and it's a fast sled! Can't find any recent videos of it but here's an older one: ruclips.net/video/mNJIgInycFY/видео.html
15taggarn Tackar! Men eftersom du uppenbarligen vet vem jag är så borde ju jag veta vem du är också ;) Har försökt lista ur det nu i 5 minuter men kommer ingenstans, alltid är det nåt som inte stämmer. Så få höra vem är det som heter 15taggarn? :)
Jahaaa! Jag såg 8-bit guy bland dina favoriter, det var det som var så förvirrande. Funderade på vem fan det kunde vara som gillar både sånt o skotrar samt är uppe 3 på natten ;)
Thank you! Much appreciated :) It's quite fun making them too so I'm going to continue doing so. Can't promise they're going to keep coming in this pace forever, but so far I find that it actually helps my productivity too, less time wasted in the garage because if I just sit around and do nothing there's nothing to show.
+jnuxca Sorry about that, I guess I was in too much of a hurry, I wanted to get it edited and uploading before dinner (uploading takes well over an hour). I'll keep it in mind for the next one, thanks for the feedback 👍 Lol, it was a lot harder than it looks because my preview wasn't mirrored so I kept going the wrong way with my hand 😂
gislemark79 Verkar som att jag har haft lite för bråttom med att ladda upp, hann inte med nån quality control.. Jag kan inte kolla just nu hur illa det är men får ladda upp en ny version med bättre ljud :)
Kanske skiter i det då, var kanske inte sådär super viktig information iaf ;) Känns som att det är som värst när man tittar bort från kameran, kanske måste skaffa en liten mikrofon så jag slipper justera volymen åt alla håll. Jag ska kika!
It’s been so long since you’ve uploaded a video that I’ve had to go back and watch all your videos again. Love the content!
2 Stroke Stuffing is where I come from..on his suggestion! You have lots of cool projects yourself
Thank you! :)
Back ground music is not required !
Awesome! Thanks man! No knife edging!
2STROKE STUFFING Don't do it! ;) I remember the first time I tested knife edge vs rounded in my "flow bench" (hold it under the tap), I was amazed! Haven't had any knife edges anywhere since then :)
I gained about 60 subs Wednesday after your recommendation so that's pretty huge for my little channel :) Biggest jump in almost 10 years! Thanks again 👍👍
Hollaendaren You deserve it!
@@Hollaendaren Knife edging cast iron is un-imaginable. What did you see Hollaendaren ? with you "flow bench" ??? BTW don't tell an Australian / New Zealander "don't do it". Because they're have to then do it !.
Hi, who is playing in the background? Alain Miljard has a lit of fantastic bikes, but he do not show how he goes about it, so this and twostrokestuffing are great!!!!
good shit, less music so I can hear you, and try to speak towards the mic when possible, keep up the great work!
Wow youre getting famous bud now you got to start working on the fortune, love these videos well done.
Russ White Haha, I only need another half a million or so subscribers and I can start doing this for a living ;) RUclips are cheapasses. But people actually being interested in my stuff is good enough!
Ha hot rod people are the same everywhere they just love to learn how to go fast in anything and i do mean anything including lawnmowers lol
Hey there, I have a 244 out of a polaris colt, and I am wondering if it is a good engine to do racing, planing to put it into an 1971 elan. Thanks and keep up the good work! Really exited to see the 277cc run x)
marc robichaud I have no experience with them myself but if it's the same engine as in the Gemini 250 then I'd say it's got a lot of potential! A friend has a Gemini that he runs on methanol and it's a fast sled!
Can't find any recent videos of it but here's an older one: ruclips.net/video/mNJIgInycFY/видео.html
We use that plate to make ignition base plates.
Impressed ! :)
Så jävla roligt med garage klipp! bra initiativ Nico!!!!!!
15taggarn Tackar! Men eftersom du uppenbarligen vet vem jag är så borde ju jag veta vem du är också ;) Har försökt lista ur det nu i 5 minuter men kommer ingenstans, alltid är det nåt som inte stämmer. Så få höra vem är det som heter 15taggarn? :)
Haha! Han som smälter kolvar på Yamaha sm 300!!!😅
Jahaaa! Jag såg 8-bit guy bland dina favoriter, det var det som var så förvirrande. Funderade på vem fan det kunde vara som gillar både sånt o skotrar samt är uppe 3 på natten ;)
HOW THICK IS THE SPACER? Thanks
I love 2t tech and devolopment. That 20mm alu plate u use for base gasket. What is the price for a plate. Its very expensive in Suriname where i live.
I think it was 120 wide and 20 thick, it costs about 80 USD per meter here.
I like your videos!!!! Upload every day. :D
Thank you! :)
Unfortunately I do have other stuff to do also other than work on the engine and film/edit ;)
I love the videos keep them coming. I'm going to spread the word and try to get you more sub's.
Thank you! Much appreciated :)
It's quite fun making them too so I'm going to continue doing so. Can't promise they're going to keep coming in this pace forever, but so far I find that it actually helps my productivity too, less time wasted in the garage because if I just sit around and do nothing there's nothing to show.
Curious to see it running.
Mind the finger!
Probeer jij het maar eens met een ongespiegelde preview, een halve minuut duurde het gewoon he :)
hard to hear you in the first part of the video, but good work! the ending was funny ahahah
+jnuxca Sorry about that, I guess I was in too much of a hurry, I wanted to get it edited and uploading before dinner (uploading takes well over an hour). I'll keep it in mind for the next one, thanks for the feedback 👍
Lol, it was a lot harder than it looks because my preview wasn't mirrored so I kept going the wrong way with my hand 😂
i feel you, i've got a slow connection too, uploading takes forever :')
We're hopefully getting fiber later this year, then it won't be as much of an ordeal any more :) But for now I'm stuck with 2 Mbit/s upload..
lucky you! i get something around 0.68 -0.70 Mbit/s ahahahah
гильза очень тонкая.
Tips, sänk volymen på musiken när du pratar, det är svårt att höra vad du säger ibland.
gislemark79 Verkar som att jag har haft lite för bråttom med att ladda upp, hann inte med nån quality control.. Jag kan inte kolla just nu hur illa det är men får ladda upp en ny version med bättre ljud :)
Gör inte det. Du kommer att få färre visningar.
Men tänk på det till nästa gång :)
Kolla gärna in min kanal, full av mopperacing :)
Kanske skiter i det då, var kanske inte sådär super viktig information iaf ;)
Känns som att det är som värst när man tittar bort från kameran, kanske måste skaffa en liten mikrofon så jag slipper justera volymen åt alla håll.
Jag ska kika!