My Fimi Palm doesn't turn the gimbal back, and get overheat after few minutes of shooting. I've just got it for 2 weeks. Lucky that I've found this video, and it comes with firmware files too. Everything good now! Thank you very much
Had a problem with centering the camera after I've forgotten to remove the protective cover before cam switch on. Your advice helped to fix the problem. Thanx a lot!
Are these different firmware specialized for the motor calibration or just the earlier version firmware for Fimi Palm? The new firmware also has the calibration feature. But I found that the calibration procedure shown in your video is different. It seems to be more thorough
I see you have issues with the sensitivity of the screen. You have to master just the prefect pressure to get the screen to react. I hate swiping 5-6 times to change a setting!!
Hello and thank you for this video. There is still a question that remains in my head: Is this procedure still necessary when the last fimware available at the time of writing these lines is already installed: namely that on my FIMI PALM I am with these versions: Camera: V1124.01 Gimbal: V1007.D Because if I refer to the numbering of the two files you've uploaded, they seem to precede the last version available on the official website. Thank you for your clarification on this subject and cordial greetings from Geneva, Switzerland.
this firmware caliabarion is from Xiaomi last 2,3 months ago ! you can use this to fix gimbal error ! after that go Fimi Offical Page download lastest flash firmware to flash fimi agian
I second this: was also with that versions of FW and had no issues updating them again. Unfortunately, I'm still experiencing this issue with the gimbal, so going to repeat the process one more time (motor calibration).
@@clip24h The error doesn't appear so fast as before, but it still appears when I try to do Motion Lapse. Don't have the heating problem, though. I did also the Gimbal Calibration, but no luck! Another issue I have is the battery: it displays 50%+ and some minutes after it says that it's critically low, and switches off Palm. If I put to charge and check back at the App, it says it's 65%+ -- and always bouncing -- going up and down, even when charging.
Hi, great tutorial, but I still have problem :( My FIMI PALM stops on M2 calibration with Calibration failed Status code: 1 Do you know what is the problem?
I have done everything the video says and not only has the problem not been solved, but I have also lost all access to the menus, I can only access the gimbal adjustment and the motor calibration. Please help.
Fantastic tips !!!! Now I am able to record bigger videos putting it in this mode without giving the card error slowly. Too top. Like Guaranteed won 1 more Subscriber.
Hi hope you Good i followed your instructiins so currently when it reach on the Calibration it says please charge your phone and when i put on the charge ddnt charge i left it the whole day but ddnt charge and again even if it is on the charge when you try to calibration still say please charge. I dont know what to Do please help me with the way foward
It worked ! It is still HOT as HELL , but at least is working . Thank you very much ! why FIMI do not adres this issue ... it is not OK - the camera is getting TOO HOT ...
I put the SD card but when i click on motor calibration, I have a message "low battery, please charge". The battery is already full and I can't do the calibration... I can't install the old firmware, please help me...
I followed your instructions and updated my FIMI Palm but I am still having issues. My first issue is my FIMI Palm gets very hot during recording and I can feel a vibration coming from inside the camera and when I am recording the vibration makes the video all shaky and unusable. My second issue is that the actual head of the camera sits slightly sideways and not center. No matter what I do, the head is slightly tilted to the side so all my videos are at a slight angle. When I turn my camera off, the lens is again, at an angle. How do I fix this? Thank you.
you download file camera calabition only in my link ! after that you install this firmware ! this firmware only function to re calication gimbal ! after run 1-2-3 and completed all no error ! then you download flash firmware on fimi website offical to flash new new firmware
Thank you for replying. I got an error after I tried to update with your link. When I recalibrated, it gets stuck at 10% for 5 minutes then gives me a “failed to recalibrate” message. Any solution?
@@clip24h If I flash it with a 4gb micro SD card and the software was successful, can I use a 64 gb afterwards? Or will the updated software be deleted? Thank you.
HELLO! I made all that your video shows but I'm stuck with a big problem. Touchscreen does not work and I'm only able to do the motor calibration but IT GIVES ME SD CARD ERROR AND I CAN NOT FORMAT because the touch does not work! i calibrate twice the motor and restarted it infinite times but it still doesn't work. i can't flash or update anything because it does not read my sd card. no one of many! that I already formatted as you counsil. could you help me? Is there any kind of hard reset?
The touch works if I have to make a motor calibration! And it's very sensitive, too! It seems does not work for all the others menù parts. I guess if I can format a sd card IN THE FIMI PALM I fix the problem. There's no any kind of reset?
@@luomoluppolo4832 oh if you use flash firmware for calibation you one 1 function !! afater you calibaretion complete !! you download lastest firmware copy and paste in 8gb sd card to flash firmware again !!!
@@clip24h I have tried this method, but still didn't work, my fimi still have vibrations when I hold the gimbal, and too very hot.. But I say thanks very much for you
@@fendinur4302 my request to fimi support resulted in the following "It's normal to be hot after using due to the small voltage. We've tested the stable temperature is around 55 degrees, will not cause a burning sensation to the human body. Please don't worry." When I asked again if you were sure and 55 degrees was not unusual, the message news came again "The average tempearate is around 55 degres, please don't worry." But I think 55 degrees on the surface are definitely too high on the surface. I have also the problem that the fimi goes into "gimbal protect" mode irregularly when recording. Too bad, but immature!!!
Hi after I try this method is working. Thanks. But now got one problem would like to ask do you any Fimi palm firmware to download? The official www.fimi.com/fimi-palm-gimbal-camera.html download not working at the moment. Now stuck on the calibration firmware. Hope any guide. Thanks
hello i bought xiaomi and i am very unhappy! the problem is this after updating the gimbal goes crazy, after turning on the cam a few times turns right left quickly until the stop and an error pops up to set the screen ... the screen does not work, at the same time I press the joystick and turning on the cam then the cam works for a few seconds and turns off ??? I can't do anything ... help me
My Fimi Palm 1 had exactly same overheating problem from the beginning. So, i tested your solution. This solution does not work in my case and i am sure that it doesn't work on long term. Why ? Actually, the problem is not firmware but hardware. On the gimbal, there are 3 motors. Overheating is linked to the pan motor : it is located just on the top the camera body. This motor seems to be super fragile and overheat from factory or after some hours of use of the camera. In my case, i turn on the camera and after 30 s, camera send an error message. I bought Fimi Palm 1, because i like Xiaomi products. But visiblement, Xiaomi is just a commercial sticker for FIMI . I had so many problems with the Fimi Palm 1 in one year of use that i can say that it's just a piece of chinese crap, not even a prototype : - Overheating - Draining battery - Cracking noise of the cover - Bugged firmwares - Bad quality of images - shakings of the gimbal More than this, there is no real customer support from FIMI. They give answers but never really help. And now, this product seems discontinued : no firmware update, no support. Next buy will be DJI...
My Fimi Palm doesn't turn the gimbal back, and get overheat after few minutes of shooting. I've just got it for 2 weeks.
Lucky that I've found this video, and it comes with firmware files too. Everything good now! Thank you very much
Had a problem with centering the camera after I've forgotten to remove the protective cover before cam switch on. Your advice helped to fix the problem. Thanx a lot!
you are wellcome
Good
Are these different firmware specialized for the motor calibration or just the earlier version firmware for Fimi Palm? The new firmware also has the calibration feature. But I found that the calibration procedure shown in your video is different. It seems to be more thorough
thank u ! because my video is very old ! maybe xiaomi has change way flash firmware
Thank you great tips, now my palm is working!!!!
thank u
I see you have issues with the sensitivity of the screen. You have to master just the prefect pressure to get the screen to react. I hate swiping 5-6 times to change a setting!!
fimi palm have some issue like this ^^ but new firmware fix it
Hello and thank you for this video.
There is still a question that remains in my head:
Is this procedure still necessary when the last fimware available at the time of writing these lines is already installed: namely that on my FIMI PALM I am with these versions:
Camera: V1124.01
Gimbal: V1007.D
Because if I refer to the numbering of the two files you've uploaded, they seem to precede the last version available on the official website.
Thank you for your clarification on this subject and cordial greetings from Geneva, Switzerland.
this firmware caliabarion is from Xiaomi last 2,3 months ago ! you can use this to fix gimbal error ! after that go Fimi Offical Page download lastest flash firmware to flash fimi agian
I second this: was also with that versions of FW and had no issues updating them again. Unfortunately, I'm still experiencing this issue with the gimbal, so going to repeat the process one more time (motor calibration).
@@FilipeBento so have you fix your fimi palm okay ?
@@clip24h The error doesn't appear so fast as before, but it still appears when I try to do Motion Lapse. Don't have the heating problem, though. I did also the Gimbal Calibration, but no luck!
Another issue I have is the battery: it displays 50%+ and some minutes after it says that it's critically low, and switches off Palm. If I put to charge and check back at the App, it says it's 65%+ -- and always bouncing -- going up and down, even when charging.
@@FilipeBento so many problem ....
Another question - after you Power it Off - how should you leave it - lying around , standing or with the protector ?
Tips when turn off wait 1-5s ! Gimbal turn off then you can lay it down ! I always lay it down ! Don't touching gimgal after shutdowns 1-5s
Clip24h - Thank you very much !
Its really work, Thank You.!!!
MY MAN, thank you.
Hi, great tutorial, but I still have problem :( My FIMI PALM stops on M2 calibration with Calibration failed Status code: 1
Do you know what is the problem?
there any solution like this for a DJI Osmo Pocket ?
I have done everything the video says and not only has the problem not been solved, but I have also lost all access to the menus, I can only access the gimbal adjustment and the motor calibration. Please help.
Alter re calibration completed ! Camera work correctly ! You download new firmware camera and gimbal on fimi office web ! Update again
@@clip24h OK, fixed, thanks.
thank you soooooooo much!!!!!!
How long does your battery work for them? mine only lasts two hours. Thank you
you mean time of battery Fimi Palm
@@clip24h Yes, in the specifications it indicates; Battery life 240 minutes, it only lasts for about 120 minutes. Thank you.
@@PacoLanzarote8090Tributo VIdeo test 4K only 1h10 ! but fullhd will long
@@clip24h OK, Gracias.
Fantastic tips !!!! Now I am able to record bigger videos putting it in this mode without giving the card error slowly. Too top. Like Guaranteed won 1 more Subscriber.
Hi hope you Good i followed your instructiins so currently when it reach on the Calibration it says please charge your phone and when i put on the charge ddnt charge i left it the whole day but ddnt charge and again even if it is on the charge when you try to calibration still say please charge.
I dont know what to Do please help me with the way foward
It worked ! It is still HOT as HELL , but at least is working . Thank you very much ! why FIMI do not adres this issue ... it is not OK - the camera is getting TOO HOT ...
You update new firmware ! It fix all ! Fimi will work normal ! I video 36 minutes not hot anymore
Clip24h - Thank you !
any fixes for IMU error? fimi were not help at all.
very helpful. thank you.
Good information thank you my friend
Do you have this problem again after that? I bought my fimi palm and when I turned it on this message appear to me.
SOME TIME have display problem click center gimbal !
Hi, do you have fix for Fimi Palm 2 Pro?
Mine always occur "Gimbal protected. Clik to recenter" when doing motion lapse.
my fimi palm always appear "gimbal protected" sign during the track time lapse, and the recording stop there discontinued
Tried this solution but it did not work for me - gimbal still gets very hot and does not work properly - I think I must have a faulty unit
I put the SD card but when i click on motor calibration, I have a message "low battery, please charge". The battery is already full and I can't do the calibration... I can't install the old firmware, please help me...
sorry i don't catch this situation ! so i don't know how to do ! can you contact xiaomi support
I followed your instructions and updated my FIMI Palm but I am still having issues. My first issue is my FIMI Palm gets very hot during recording and I can feel a vibration coming from inside the camera and when I am recording the vibration makes the video all shaky and unusable. My second issue is that the actual head of the camera sits slightly sideways and not center. No matter what I do, the head is slightly tilted to the side so all my videos are at a slight angle. When I turn my camera off, the lens is again, at an angle. How do I fix this? Thank you.
you download file camera calabition only in my link ! after that you install this firmware ! this firmware only function to re calication gimbal ! after run 1-2-3 and completed all no error ! then you download flash firmware on fimi website offical to flash new new firmware
Thank you for replying. I got an error after I tried to update with your link. When I recalibrated, it gets stuck at 10% for 5 minutes then gives me a “failed to recalibrate” message. Any solution?
Also the micro SD card I’m using is 64 GB. You posted a comment down below saying to only use a 4 GB micro SD?
@@AY-qm1xp flash firmware use only 4gb-8gb ! 64gb can't not
@@clip24h If I flash it with a 4gb micro SD card and the software was successful, can I use a 64 gb afterwards? Or will the updated software be deleted? Thank you.
HELLO! I made all that your video shows but I'm stuck with a big problem. Touchscreen does not work and I'm only able to do the motor calibration but IT GIVES ME SD CARD ERROR AND I CAN NOT FORMAT because the touch does not work! i calibrate twice the motor and restarted it infinite times but it still doesn't work.
i can't flash or update anything because it does not read my sd card. no one of many! that I already formatted as you counsil. could you help me?
Is there any kind of hard reset?
so you have send xiaomi to warranty ! may be your screen touch is not woking
The touch works if I have to make a motor calibration! And it's very sensitive, too! It seems does not work for all the others menù parts. I guess if I can format a sd card IN THE FIMI PALM I fix the problem. There's no any kind of reset?
@@luomoluppolo4832 oh if you use flash firmware for calibation you one 1 function !! afater you calibaretion complete !! you download lastest firmware copy and paste in 8gb sd card to flash firmware again !!!
It still does not read the sd card
@@luomoluppolo4832 you find 4 or 8gb micro sd card !!
I follow your steps but i still have the same problem unfortunately.
What exactly is this problem. I have seen even osmo pocket 3 got these issues.
How sir
do i need to do this with the latest firmware? is it already included?
You can connect with app fimi play ! It will update lastest firmware
@@clip24h so do these steps and then reupdate with the app?
@@hafyz after you flash firmware and fix error ! you download lastest firmware on web Fimi copy your card and update from card
@@clip24h okay thanks,, you just gained a sub,,
I have similiar problem, there is pop up arrival limit and gimbal erorr, then appear vibration on the gimbal. Do you help me for solutions? Thanks
You see my description and download to re calibration again to fix
@@clip24h I have tried this method, but still didn't work, my fimi still have vibrations when I hold the gimbal, and too very hot.. But I say thanks very much for you
@@fendinur4302 you download and upgrade firmware only calication function right ?
wait run process step 1, step 2, step 3 = 100% successful ?
@@fendinur4302 my request to fimi support resulted in the following "It's normal to be hot after using due to the small voltage.
We've tested the stable temperature is around 55 degrees, will not cause a burning sensation to the human body. Please don't worry."
When I asked again if you were sure and 55 degrees was not unusual, the message news came again "The average tempearate is around 55 degres, please don't worry."
But I think 55 degrees on the surface are definitely too high on the surface.
I have also the problem that the fimi goes into "gimbal protect" mode irregularly when recording.
Too bad, but immature!!!
Hi after I try this method is working. Thanks. But now got one problem would like to ask do you any Fimi palm firmware to download? The official www.fimi.com/fimi-palm-gimbal-camera.html download not working at the moment. Now stuck on the calibration firmware. Hope any guide. Thanks
Had you fixed your fimi palm
hello i bought xiaomi and i am very unhappy! the problem is this after updating the gimbal goes crazy, after turning on the cam a few times turns right left quickly until the stop and an error pops up to set the screen ... the screen does not work, at the same time I press the joystick and turning on the cam then the cam works for a few seconds and turns off ??? I can't do anything ... help me
i have videp ! update firmware to re calibation camera again ! then update new firmware then fixed
mine stuck at "upgrade now"... it keep stuck at that same screen over and over again
delete the update file in the memory card
My Fimi Palm 1 had exactly same overheating problem from the beginning. So, i tested your solution.
This solution does not work in my case and i am sure that it doesn't work on long term. Why ?
Actually, the problem is not firmware but hardware. On the gimbal, there are 3 motors. Overheating is linked to the pan motor : it is located just on the top the camera body. This motor seems to be super fragile and overheat from factory or after some hours of use of the camera. In my case, i turn on the camera and after 30 s, camera send an error message.
I bought Fimi Palm 1, because i like Xiaomi products. But visiblement, Xiaomi is just a commercial sticker for FIMI
.
I had so many problems with the Fimi Palm 1 in one year of use that i can say that it's just a piece of chinese crap, not even a prototype :
- Overheating
- Draining battery
- Cracking noise of the cover
- Bugged firmwares
- Bad quality of images
- shakings of the gimbal
More than this, there is no real customer support from FIMI. They give answers but never really help.
And now, this product seems discontinued : no firmware update, no support.
Next buy will be DJI...
Oui tout a fait...... my brother has the DJI osmo and it is considerably better quality....
The file did not work for my gimbal. What should I do?
Have you flash firmware fix ! Remember 4gb micro SD only
@@clip24h Nevermind. it fixed itself after several restarts. Thanks!