Good job sorry about the hose. I’ve started week four of running my business had a busy start and last week was just a few qouts but has lead to a job this week which hopefully I’ll be starting tomorrow. And I’ll be doing some more leafleting and maybe approach some business. But I expect it will go up and down over the first few months but staying positive.
Hi Jake, I love the jobs you get to do and places you get to go to for work! This place is gorgeous. I don't mind your sound overs at all, as you said a mix of everything is cool. You do such a fantastic job with great, helpful information. I'm going to have a crack at our mossey block driveway with a turbo nozzle, I don't have a surface cleaner.
A lot of people say blue hose doesn't mark its rubbish I even had blue marks on tarmac the other day. The only hose I have seen that is none marking and it has them words stamped on it is sold by Q Services its a blue hose with a clear sheath covering it but it is quite expensive
On the equip2clean site which machine would you suggest starting with? Dont want to blow alot of cash at first, love the videos will be joining the membership soon 👍
Surface cleaner on most block paving is a waste of time if your machine is 15lpm. In my opinion. I mostly use my turbo nozzle on all block paving driveways
Hey man love your videos How do you like the kiam pressure washer? I've been looking into them as they seem great value for money. Have you had any issues with it?
That piece of hose that keeps going on you brother what you need to do is get a piece of cable that twice as long as you need so if it happens again all you have to do is take it to the hydraulics place near yours and he’ll cut the end off and just refit the bit on the end it’ll cost like £20 not very much at all and you don’t need to replace the cable you can also buy one of them foam peanuts that you go in the swimming pool with and cut it to the shape of that hose entrance to stop it from rubbing on the inside of the metal tube
Okay mate I’m feeling like I’m just picking at you now but I’m honestly just trying to help you do not adjust the cast the wheels on your surface cleaner to adjust the height of it there is an Allen key not on the base of your surface cleaner where you put your hose in that you can turn either way to either higher or lower the Jets underneath the surface cleaner but be careful when doing so because if you lower them too much and you come off the corner of a patio or a high point in a drive you might catch the bottom of the Jets the reason the jet to set to the debt they are it’s because if you go off the corner of the plastic will hit the floor and the Jets will not get damaged but if you’re on a flat surface with no dips or edges to worry about you can lower the jet right now to get a better result i’m also going to close by lowering the jets you could cause damage to the joints on Indian stone or you could cause lines if your machine is powerful enough
Good job sorry about the hose. I’ve started week four of running my business had a busy start and last week was just a few qouts but has lead to a job this week which hopefully I’ll be starting tomorrow. And I’ll be doing some more leafleting and maybe approach some business. But I expect it will go up and down over the first few months but staying positive.
It's all about having the right attitude mate, positivity, consistency & good, hard work
Hi Jake, I love the jobs you get to do and places you get to go to for work! This place is gorgeous.
I don't mind your sound overs at all, as you said a mix of everything is cool.
You do such a fantastic job with great, helpful information. I'm going to have a crack at our mossey block driveway with a turbo nozzle, I don't have a surface cleaner.
A lot of people say blue hose doesn't mark its rubbish I even had blue marks on tarmac the other day. The only hose I have seen that is none marking and it has them words stamped on it is sold by Q Services its a blue hose with a clear sheath covering it but it is quite expensive
Hi jake great video as usual can I ask where did you purchase the mask and waterproof trousers from please? Thanks
you earned yourself a new follower,greetings from germany.keep your work up mate
good video mate, i wouldn’t suggest using a turbo nozzle on sandstone as it can be very detrimental to the stone- fan lance is fine
Another brilliant vid, would you do a video on all the products you you and what you use them on or make a comment below please,cheers
Great video, do you know how to remove nozzle etching from tarmac driveways? Thanks
Hi Jake, not sure if you’ve gone over this before but how did you go about starting off your business and getting your customers? Cheers
On the equip2clean site which machine would you suggest starting with? Dont want to blow alot of cash at first, love the videos will be joining the membership soon 👍
As always. Another fantastic video. Loverly property 👍
The 3/4 non pressure hose you are using have you put it onto the hozelock reel yourself or did it come with it?
You can get the hose cut and shortend look for hydrolic pipe cutting place
Surface cleaner on most block paving is a waste of time if your machine is 15lpm. In my opinion. I mostly use my turbo nozzle on all block paving driveways
Totally agree 21lpm for a FSC
I have a 15lpm 4000psi. And have no issues at all with the fsc.
Do a video and post it would love to know what you do differant from me 👍🏻
@@Weirjetwashing experience lol
@@Weirjetwashing and the fact its 280bar
Hi mate
I bought a red hose from ac pressure washers it's never marked or split in the 2yrs if had it
would you not consider a washer that you remove from the van to prevent any potential leaks / floods?
Hey man love your videos
How do you like the kiam pressure washer? I've been looking into them as they seem great value for money. Have you had any issues with it?
I've had lots of issues with the unloader valve but I'd still recommend it for sub £1k if you're on a budget 👍
Just found you ,
Cracking video ...what camera are you using please
Cheers
Stu
Just my Google pixel 6 😊
What's them waterproof trousers and braces you have on, they look good
That piece of hose that keeps going on you brother what you need to do is get a piece of cable that twice as long as you need so if it happens again all you have to do is take it to the hydraulics place near yours and he’ll cut the end off and just refit the bit on the end it’ll cost like £20 not very much at all and you don’t need to replace the cable you can also buy one of them foam peanuts that you go in the swimming pool with and cut it to the shape of that hose entrance to stop it from rubbing on the inside of the metal tube
Get some dunlop thermo they are by far the best i have had, tractor ran over my foot didn't even as much as leave a mark
Great work and commentary. What colour insert are you using on the xjet please.
Black 5:1 👍
Can you use the x jet with the Parker brand machine that you started with?
Could you please provide a video on how you gain jobs . Love your work mate work ethics are amazing. Love from Australian yea the bois
Are there any safer alternatives to hypo thay actually work do you know atall mate??
What soap are you using with the hypo
Jake don’t mine you voice over all good stuff 👍
what do you do with indian sandstone if they don’t want the pointing damaged
Don’t get your synergy mixed up with your unleaded
Thought the same 😂😂
when using chemical through backpack and wfp did you have change anything with back pack and do you use same set up to clean windows or different?
Okay mate I’m feeling like I’m just picking at you now but I’m honestly just trying to help you do not adjust the cast the wheels on your surface cleaner to adjust the height of it there is an Allen key not on the base of your surface cleaner where you put your hose in that you can turn either way to either higher or lower the Jets underneath the surface cleaner but be careful when doing so because if you lower them too much and you come off the corner of a patio or a high point in a drive you might catch the bottom of the Jets the reason the jet to set to the debt they are it’s because if you go off the corner of the plastic will hit the floor and the Jets will not get damaged but if you’re on a flat surface with no dips or edges to worry about you can lower the jet right now to get a better result i’m also going to close by lowering the jets you could cause damage to the joints on Indian stone or you could cause lines if your machine is powerful enough
How come you didnt use your sprayer to seal it?
Where do you spray or get rid water
How long did the job take?
What ratio hypo did you use on them slabs
5:1 😊
Damn birds !!
LE CHAMEAU wellies you will never buy another brand again
Somewhere
Its still got chemicals in it so it all has to go somewgere
of course you can get non marring hoses