Hello there! Beautiful wallet! I just purchased the template for this and am excited to start. One process question though: when you're burnishing the inside edge of the card slots, how are the two card slot peices stuck together? Thanks!
Hey buddy, you could do a video on how you remove glue from your leather after you have finished. And how you remove any scuffs or scratches. I use the same glue and leathers as you but I haven’t got a clue how to remove glue, it’s very easy to get some on the surface when gluing!
Remove from Buttero leather its quite easy and with no any marks left just rubbing off, with Pueblo leather its quite impossible to clean without marks so i just take extra attention when glueing Pueblo parts :)
Thank you for support! I cant say, it depends on your skill level and equipment you have :) As im making it not for the first or second time, so I think, i could make it in several hours
excellent design, I would love to be able to do it, I write from Colombia and I would like to know if you could tell me where I can buy your design in pdf
Хорошая работа, но большой отступ сверху для купюр и доп. прослойка ломает обложку бумажника, для пары месяцев ношения он уже довольно плохо выглядит. Нужно просто брать на обложку пуебло потолще, около 2мм, тогда его обложка будет девственной намного дольше, ровней, а патина ляжет равномерней.
what kind of press is that you use for cutting out the pattern? design looking great, will try it out once I get my new leather, is 1.2mm a good thickness for this design?
Check the video about this press ruclips.net/video/bYRtC7yzXyg/видео.html Regarding to leather thickness, yes its ok, im using 1.2-1.4mm for such wallets
The Fiebings leather glue used in this project is not very strong in my tests against regular smelly contact cement and Aquilim 315 water based cement. Obviously proper contact cement is the strongest but the next best thing is Aquilim 315 in my opinion which works in the same way as regular contact cement but without the toxic fumes and odor.
I dont know why it always should be strongest. For sure there are stronger glues. Fiebings more than enough strong for what im doing. I never had problem with this glue regarding to hold glued layers to weak. P.S. for about a year im using Ecostick 1816B now, but switched not because Fiebings is to weak :)
@@strhandmade I found that when stitching or burnishing my edges they would start to split apart right at the edge and I would have to add more glue to rejoin them. I also used the SEIWA leather glue which a lot of the Japanese use but still had the same problem. I make my wallets indoors and my wife hates the smell of contact cement so I found the Aquilim 315 water based contact cement and my problem was gone. Never tried the Ecostick and if it ain't broke then don't fix it.
I tried, not really liked it. Im pretty quick with free hand stitching after almost 4years pulling thread through holes :) Its a nuance in video, you can see some weird positions of hands, or things looks like im doing for the first time, because of i need to show it to camera :) If i would be stitching just regular way, in video you just would see my hands :)
@@strhandmade I understand! I wouldn't say that your stitching result looks amateur but in the contrary it looks perfect. Whatever works best for you man! Keep up the good work!
Очень стильный, компактный кошелек получился, обожаю минимализм. Не мое дело, но почему не пользуетесь шорником, это тот инструмент, которым когда попробуешь, больше не отвяжешься. Если не прав- прошу извинить) Кожа топ, у нас в Молдове такой не найти, а с ценой доставки изделие нерентабельно становится. Удачи!
Well well well, when I put on ma leather, and rock to sum Metallica, Delta Parole, Foo Fighters or the Smashing Pumpkins I feel like I can do anything in the whole wide world.
There is a difference between making and assembling parts. You rely on ready-made molds, my dear, that you cut them with molds and then collect them. So say (How do I collect a purse and not how to make it) Thanks
It's an incredibly beautiful wallet. Love your style and work.
Nice piece. And giving the thickness of the leather is a nice touch too.
As always, thank for sharing your delicate craft
Nice work Tomas! I am jealous of your new bell skiver!
Thanks! I have it for a while :)
Thomas, you are the man when making leather wallets.
I will purchase this template and see if I have the same outcome.
Thanks for sharing 🤗
Thanks for support! and have fun with your craft 🐗
the process of making is fascinating! I have learnt few useful tips just by watching this video!
Glad it was helpful!🐗
Cool stuff . And i love the black card blanks too
Thomas, great design and craftsmanship …. As always! Gordy
Great work Love your style and choices of leather.
Thank you! 🐗
Clean lines. Precision work. Attention to detail. New subscriber. I’ll be watching more of your crafting. Dig it. Great stuff.
Thanks! You are welcome🐗
Great work watching your vids from south Texas ! Great stuff
Cheers to Texas!
Superb learnt a lot thank you
подход к процессу изготовления на высшем уровне! 👌👏
спасибо! стараемся :) 🐗
Very clean work!
just got the pattern! thx for your hard work! cheers from Québec ✌️
Great work ! Thank's and good luck !
Hello there! Beautiful wallet! I just purchased the template for this and am excited to start. One process question though: when you're burnishing the inside edge of the card slots, how are the two card slot peices stuck together? Thanks!
Hello! If i understand correctly what you are asking for: ruclips.net/video/GByiAXY7Zpk/видео.html here you should see how I make it.
Bagus mas...DOMPET...nya👍👍👍
Thank you 👍👍👍🌹🌹
Love this design. I’ll be picking up this wallet in shell cordovan soon.
You are welcome!🐗
Good looking wallet, amigo!
Beautiful
Great work very skilled hands, excellent minimilist design.
Thank you! Cheers!🐗
Good job sir
I learn something new from here! Ačiū!
Happy to help!
Hey buddy, you could do a video on how you remove glue from your leather after you have finished. And how you remove any scuffs or scratches. I use the same glue and leathers as you but I haven’t got a clue how to remove glue, it’s very easy to get some on the surface when gluing!
Remove from Buttero leather its quite easy and with no any marks left just rubbing off, with Pueblo leather its quite impossible to clean without marks so i just take extra attention when glueing Pueblo parts :)
@@strhandmade thank you for the advice. It’s so easily done with glue!
bought thee template. Waiting on leather.
What is the thickness of the leather you use in terms of oz for most of your wallets?
I love your designs and templates. The are beautiful and simple. Good for minimalists
What did he use to apply colombus wax? Just camvas ?
Yeah man. Just rub your canvas in it so it warms up! Get a much thinner layer, which is a good thing!
Yes, i use synthetic canvas (I believe its polyester canvas) it gives shine to edges
@@strhandmade does it make any difference to rub the canvas to wax rather than rub the wax to leather and then with the canvas?
I'm making this wallet at the moment - it's a great design. Do you need to thin the long strip of leather at the top of the wallet?
I do, as thin as i can with that strip.
@@strhandmade Thanks.
Thomas. Such a great design. I bought the template and cant wait to make it.
How long does it take you to make this wallet?
Thank you for support! I cant say, it depends on your skill level and equipment you have :) As im making it not for the first or second time, so I think, i could make it in several hours
excellent design, I would love to be able to do it, I write from Colombia and I would like to know if you could tell me where I can buy your design in pdf
www.strhandmade.com/product-page/pdf-template-myth-wallet
Хорошая работа, но большой отступ сверху для купюр и доп. прослойка ломает обложку бумажника, для пары месяцев ношения он уже довольно плохо выглядит. Нужно просто брать на обложку пуебло потолще, около 2мм, тогда его обложка будет девственной намного дольше, ровней, а патина ляжет равномерней.
Товарищ, это пока единственный русский коммент что я нашел. У автора ролика акцент такой странный, русский шоли, не знаешь?
@@АлександрБакланов-с4ъ Автор из Литвы, русский знает скорее всего, раннее было много русских комментов. Но я тут при чем? Его и спроси
@@Eto_Ilyuha редко авторы отвечают, а вы вот помогли, спасибо)
@@АлександрБакланов-с4ъ Я сам с Литвы, русский как и английский мне не родные, но русский знаю с детсва, говарю и понемаю намного луче английского
I was wondering what leather you used in this video. Also you stitching punch
Its veg tan "Pueblo" leather
what kind of press is that you use for cutting out the pattern? design looking great, will try it out once I get my new leather, is 1.2mm a good thickness for this design?
Check the video about this press ruclips.net/video/bYRtC7yzXyg/видео.html
Regarding to leather thickness, yes its ok, im using 1.2-1.4mm for such wallets
@@strhandmade thank you :)
The Fiebings leather glue used in this project is not very strong in my tests against regular smelly contact cement and Aquilim 315 water based cement. Obviously proper contact cement is the strongest but the next best thing is Aquilim 315 in my opinion which works in the same way as regular contact cement but without the toxic fumes and odor.
I dont know why it always should be strongest. For sure there are stronger glues. Fiebings more than enough strong for what im doing. I never had problem with this glue regarding to hold glued layers to weak.
P.S. for about a year im using Ecostick 1816B now, but switched not because Fiebings is to weak :)
@@strhandmade I found that when stitching or burnishing my edges they would start to split apart right at the edge and I would have to add more glue to rejoin them. I also used the SEIWA leather glue which a lot of the Japanese use but still had the same problem.
I make my wallets indoors and my wife hates the smell of contact cement so I found the Aquilim 315 water based contact cement and my problem was gone.
Never tried the Ecostick and if it ain't broke then don't fix it.
where can you buy the black card sample that your using?
I cant say exactly i believe i bough my cards on ebay, it was few years ago. Check at companies which make business cards, and stuff like that.
Hi Tomas, always best!!!
Quick question: How much space ideally left between two card slots?
Thanks
Regards from Canada
Dharmendra Variya: You can buy the pattern.
Good evening I have a question: How much is the back of the wallet larger than the face?
Is this set of clicker dies available?
no, its custom made
hola amigo,una consulta de cuantos mm es tu hilo? saludos
Thread is 1mm Ritza Tiger
what are the forks you use?
4mm diamond shape, check video description for links
Where do you get your leather dies made?
Check this my video, you will find answer ruclips.net/video/bYRtC7yzXyg/видео.html
Thanks
How come you don't use a stitching pony? It will make your job much easier and quicker.
I tried, not really liked it. Im pretty quick with free hand stitching after almost 4years pulling thread through holes :) Its a nuance in video, you can see some weird positions of hands, or things looks like im doing for the first time, because of i need to show it to camera :) If i would be stitching just regular way, in video you just would see my hands :)
@@strhandmade I understand! I wouldn't say that your stitching result looks amateur but in the contrary it looks perfect. Whatever works best for you man! Keep up the good work!
Очень стильный, компактный кошелек получился, обожаю минимализм. Не мое дело, но почему не пользуетесь шорником, это тот инструмент, которым когда попробуешь, больше не отвяжешься. Если не прав- прошу извинить) Кожа топ, у нас в Молдове такой не найти, а с ценой доставки изделие нерентабельно становится. Удачи!
пробовал я когда то, но как то не прилип он мне.
Тут в Литве с кожной тоже нелуче, но конешно намного лехче присылать с Евросаюза.
@@strhandmade на любителя как говорится) удачи вам
7:28 "SOMEONE WITH BIG EARS IS WATCHING YOU" * 🐱 *
Nice bro Are you sale it ? How i buy this wallet
Sure, check my webshop: www.strhandmade.com/shop
@@strhandmade ok
@@strhandmade bro Check Instagram
Томас, ю а реали куул!
Привет друг. Пожалуйста, скажи, кто производитель кожи, какая толщина, какой клей используешь? Благодарю🤝
Английский язык понимаю мало.
Кожа: Pueblo от Badalassi Carlo, толщина ±1.4мм,
клей: Fiebings Leathercraft Cement
@@strhandmade Ещё раз благодарю. 🙂 С наилучшими пожеланиями. 🤝
How to purchase it .
check my webshop: www.strhandmade.com/shop
Well well well, when I put on ma leather, and rock to sum Metallica, Delta Parole, Foo Fighters or the Smashing Pumpkins I feel like I can do anything in the whole wide world.
💪👍
👍
Интересно, кто покупает шаблоны))).
Дружище, пора бы и бесплатно выкладывать, все равно лучше тебя ни кто не сделает этот кошель)).
я конечно не знаю кем вы работаете , но чувство есть что тоже берёте зарплату за свою работу :)
Неужели сложно включить мозги и сделать чертеж самому
@@strhandmade я просто не думал что это ваша основная работа и заработок, только и всего. Ничего обидного))
А вас есть свой магазин в вашем городе?? Или только по инету?
@@Мутузоф дома умничай парень с мозгами)). Прими как за юмор
хочу,але не можливо!
There is a difference between making and assembling parts. You rely on ready-made molds, my dear, that you cut them with molds and then collect them. So say (How do I collect a purse and not how to make it) Thanks
Sure, also you forget to mention that its not a handmade, because i used dremel tool for sanding edges :)
Where did you get your stamp and logo made?